Oblaganje robov

HOLZ-HER Streamer 1054

Stanje: rabljeno, Leto izdelave: 2000, with electric height and tilt adjustment used, top condition, low hours Manufacturer: Altendorf Model: F45 Year of manufacture: 2000 Machine no.: GS-tested Motor: 4 kW Steel guides Carriage length: approx. 3000 mm Cutting width: approx. 1050 mm tiltable up to 45° Scorer unit preparation Parallelogram guard Table extension Anodized aluminum parts Electric height adjustment Electric tilt adjustment Digital display: - cutting angle - speed Extraction connection diameter: 120/80 mm Space requirement: approx. 3010 mm x 1800 mm x 1500 mm Weight: approx. 1000 kg Location: 97447 Gerolzhofen, free loaded, unpacked Fpedpfxevxlq He Abrjn Delivery in as-inspected condition, without warranty or guarantee

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2013, Used machine Year of manufacture: 2013 Features and Technical Specifications: - Machine fully overhauled: - new Glue Jet 301 glue system (upper part 1 mm) - all units checked - all cutters sharpened - all knives replaced - Feed speed: 10 - 18 m/min - Workpiece length: min. 160 mm - Workpiece width: min. 60 mm - Workpiece thickness: 8 - 60 mm - Edge thickness: 0.4 - 8 mm - Electrical supply for variable feed: 400 V / 50 Hz, 2.2 kW - Motorized pressure bridge adjustment - Automatic chain lubrication Fpodpfx Abozlbpzorjn - PPC 315 controller with 15" touchscreen - ECO MODE energy-saving function - Infeed fence 1350 mm, motorized adjustment - Jointing milling unit 1802: - 2 x 2.0 kW, 200 Hz, 12,000 rpm with 2 milling units for jointing the panel edge - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, left rotation for jointing unit - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, right rotation for jointing unit - Edge feeder 1901 fully automatic - Glue application station Glu Jet GJ301 automatic: - 2.3 kW, 50 Hz - Granulate storage hopper - Pressure section 1913 MOT - End trimming unit 1918 (60 mm) pneumatic - Multifunction milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm left rotation - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm right rotation - Profile milling unit 1833 MOT4: - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, left rotation with CM-technology - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, right rotation with CM-technology - Scraper unit 1929 MOT2: - HW reversible carbide inserts for scraper holder R = 2.5 mm (2 pcs. required) - Flat scraper 1964 - Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Availability: short-term Location: 63934 Röllbach

Stanje: rabljeno, Leto izdelave: 2016, Rabljen stroj Fsdpfx Abozk N U Asrspn Leto izdelave: 2016 Stanje: prenovljen s strani strokovnjaka podjetja Holz-Her Oprema in tehnični podatki: - Osnovni stroj z ročno nastavitvijo pritiskalne mostu - Izvlečna opora za obdelovanec, razdalja: 600 mm - Agregat za obdelavo robov FG 201 z 2 rezalnimi glavami, vključno z diamantnimi rezili 70 x 48 x 30 mm, Z 2 - Sistem za podajanje robov 1903, samostojni podajalnik, avtomatski transport valjanega in trakovitega materiala - Sistem za nanašanje lepila Glu Jet GJ 301 z avtomatsko nastavitvijo višine nanosa lepila (tipalo na šobi) - S posodo za kartuše z lepilom - Pritiskalni valj 1912-3, pnevmatski, prvi valj pogonjen s pnevmatskim sistemom za uravnavanje potopa - Agregat za obrezovanje 1918, pnevmatsko vrtljiv 0-10 stopinj - Večfunkcijski agregat za rezkanje 1827 MOT 4 s pnevmatskim paketom, vključno z diamantnimi rezili - Agregat za rezkanje oblik 1832 za kopiranje vogalov z rezilom za obdelavo robov - Agregat za strgalne rezila 1929 MOT 2 - Zabojnik za strugnine - Strgalno rezilo FK 701 - Agregat za obdelavo robov 1940 - Nova glavna grelna enota - Najmanjša dolžina obdelovanca (mm) 160 - Debelina obdelovanca (mm) 6-60 - Debelina roba (mm), hitrost podajanja (m/min) 10 - Skupna dolžina (mm) 4930 - Teža (kg) 1420 Razpoložljivost: kratkoročno Lokacija: 63934 Röllbach

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Brand: HOLZ HER Model: SPRINT 1310 - CE Standard Automatic edge banding machine with cartridge-based glue application system for processing wood, PVC, ABS, and veneer edges. Suitable for furniture manufacturing, panel processing, custom productions, kitchens, bathroom furniture, joineries, and much more – CE compliant. Technical specifications: Min./Max. panel height: 6 – 45 mm Edge thickness: 0.4 – 6 mm Maximum glue height: 51 mm Minimum panel width: 60 mm Minimum panel length: 180 mm Feed speed: 8 m/min Compressed air: 6–7 bar Machine features: Automatic feed for roll and strip materials Cartridge glue system allows switching between EVA and PUR adhesives during operation or changing adhesive colour 3 pressure rollers, 1 driven End trimming unit with 2 motors, each 0.22 kW Multifunction unit with controlled axis for flush and chamfer milling, with 2 motors each 0.6 kW Surface scraper unit Radius scraper unit Buffing unit Acoustic enclosure Control: Rotating and tilting operator panel All units can be individually controlled Function display with text and graphics Preselection display for units Program list with names and numbers, self-diagnosis Approx. machine dimensions: 3900 x 1050 x 1800 mm (H) Weight: 1,000 kg INCLUDES OTT Rondomat corner rounding device Note on used machines: • Subject to technical changes or prior sale. • Stated prices are ex-works – loading included! • Machine has been cleaned and functionally tested. • All machines are sold as inspected, without any warranty or guarantee. Buyer is welcome to inspect the machine at the site. • Special agreements are only valid in written form. Fpjdpfx Aoy Emw Hjbren (We will respond to enquiries only if you provide your address and telephone number!)

Stanje: rabljeno, Leto izdelave: 2010, številka stroja/vozila: 48/1-006 15500889, Funkcionalnost: popolnoma funkcionalen, moč: 11 kW (14,96 KM), vhodna napetost: 400 V, največja višina reza: 85 mm, največja širina rezanja: 4.400 mm, premer žaginega lista: 350 mm, skupna masa: 5.000 kg, Oprema: dozator, - Holz Her CUT 6120 - Težka precizna visokozmogljiva žaga za razrez plošč - Leto izdelave: 2010 - Dolžina reza: 4400 mm Fpodey D Hb Njpfx Abrjn - Izstop žaginega lista: 82 mm - Krmiljenje: CUTCONTROL 2 - Tiskalnik etiket - Mize z zračnim blazinjenjem - Glavni žagalni agregat: 11 kW, žagin list 350 mm - Predrezovalni agregat: 2,2 kW - Podajalnik žagalnega vozička: 0–100 m/min, brezstopenjsko - Dimenzije stroja: pribl. 9730 x 6450 x 1650 mm - Stroj je strokovno demontiran in varno skladiščen - Enostavno nakladanje z viličarjem (vključeno v ceno) - Lokacija: Líšťany 33035, Češka (pribl. 50 km od nemške meje / Waidhaus)

Stanje: novo, Machining Center HOLZ-HER 7405 EVOLUTION CONNECT - Demonstration Machine - This offer is a complete equipment package. The following items and options are included in the price: - Material Support Table - Height-adjustable Infeed Roller Conveyor - EVOLUTION Diamond Trimming Cutter Set - CAMPUS V8 EVOLUTION CAD/CAM Software - 21.5" Flat Screen Monitor, 16:9 - Workpiece Length Measurement LASER - Milling Unit 7830 - Tool Changer 7887, 6-position Pick-Up Magazine - ECO Vacuum System - Climate Control Unit for Electrical Cabinet Cooling - Tool Changer 7874 Fsdpfx Abszq Dbdsrjpn - Angle Gearbox 7869 - Adapter for Clamex Cutter - 4-Axis CLAMEX Tool Set - HSK-F 63 Tool Holder - Drilling Unit XL 7885, 19 Spindles - Handheld Control Device - Tool Set – EVOLUTION for XL Drilling Head 7885 - New demonstration machine -

Stanje: potreben popravila (rabljeno), Funkcionalnost: omejena funkcionalnost, Leto izdelave: 2002, obratovalne ure: 11.207 h, nosilnost: 4.000 kg, dvižna višina: 3.300 mm, vrsta goriva: dizel, tip droga: simpleks, gradbena višina: 2.300 mm, moč: 62,5 kW (84,98 KM), proizvajalec motorjev: Nissan, vrsta prenosa: samodejen, dolžina vilic: 2.000 mm, lastna masa: 6.325 kg, barva: rdeča, Oprema: bočni pomik, kabina, osvetlitev, spojka prikolice, Forklift truck: - Nissan - Model: F04 D400 - 11,207 operating hours - 4,000 kg lifting capacity - 6,325 kg unladen weight - Lifting height: 330 cm - Side shifter - Fork length: 200 cm - Overall height: 230 cm - Rockinger tow jaw - Lighting - Full cab - Heating - Nissan 62.5 kW engine, No.: 21826, ENGINE DAMAGE Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Fpsdpfx Abowf Icksren Errors and omissions excepted; subject to prior sale!

Stanje: rabljeno, številka stroja/vozila: 008340, Delovno območje os X: 4400 mm Delovno območje os Y: 1300 mm Delovna miza: S podstavki z vakuumskimi konzolami Moč glavnega vretena: 11 kW Fsdsy Nkpnjpfx Abrepn Število krmiljenih osi: 5 osi Število vrtalnih vreten: 36 Število mest za orodje: 30

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, obratovalne ure: 10 h, nosilnost: 5.000 kg, dvižna višina: 5.025 mm, prosto dvigovanje: 1.130 mm, vrsta goriva: dizel, tip droga: triplex, gradbena višina: 2.470 mm, moč: 55 kW (74,78 KM), širina nosilnega okvirja vilic: 1.300 mm, dolžina vilic: 1.200 mm, lastna masa: 6.930 kg, skupna dolžina: 3.300 mm, vrsta pogona: Diesel, gradbena širina: 1.455 mm, Dizelski viličar Težiščna točka: 600 mm Širina vilic: 150 mm Debelina vilic: 60 mm ISO razred: ISO razred 4 = 5.000–10.000 kg Tip drogov: Triplex Menjalnik: Pretvornik Razred hitrosti: 20 Stanje: Novo naprava Tehnično stanje: Novo Sprednja pnevmatika tip: Superelastik Sprednja pnevmatika dimenzija: 300x15-18 Fsdpfx Ajyldtqobrspn Sprednja pnevmatika stanje: 80–100 % Zadnja pnevmatika tip: Superelastik Zadnja pnevmatika dimenzija: 7.00x12-14 Zadnja pnevmatika stanje: 80–100 % Bočni pomik, nastavitev vilic, 3. ventil, 4. ventil, delovna luč zadaj, delovna luč spredaj, ogrevanje, zaščitna mreža tovora, popolna kabina, polni prosti dvig, notranje ogledalo, rotacijska luč, brisalec, Vzvratna kamera, naslon za roko z mini ročico za 4 hidravlične funkcije, električno preklapljanje smeri v naslonu za roko

Stanje: rabljeno, Leto izdelave: 2011, Delovno območje X-Y: 4.422 x 1.753 mm, hodi X-Y: 4.955 x 1.918 mm, dolžina teka osi Z: Z = 400 mm, 5-osno rezkalno vreteno MORBIDELLI, rotacija osi C: 650°, nagib osi B: 290° (-10°), moč: 11 kW pri 20.000 1/min, nastavljivo preko inverterja, tekočinsko hlajenje, vmesnik HSK 63F, transportni trak za ostružke, avtomatsko CNC centralno mazanje, izmenjevalec orodja RAPID 24 (24 mest za orodja), razširjena vrtalna glava s 30 + 6 vreteni, 8 pozicionirnih pripomočkov, 2 križna laserja, vakuumska črpalka 250 m³/h, PC krmiljenje z Windows Office, teža cca 5.000 kg. Lokacija zaloge: stranka. Fpedpfx Aboy D Rv Derjn