Gildemeister Nef nakup rabljenega (244)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, obratovalne ure: 61.000 h, številka stroja/vozila: 04800000401, 04.02.25: Correction: this is a multi-spindle machine, not a vertical machine. Sale only within the EU. Please submit your offer for the system. ----- Technical data: see handout. No packaging; any warranty rights are excluded. Dodpohv H Hyjfx Apljut We do not assume any liability for the accuracy of the technical data, the completeness of accessories and tooling equipment, or for compliance with all safety and environmental protection requirements specified in the accident prevention regulations.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 43.558 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: 07400003691, premer struženja: 120 mm, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 118 mm, model krmilnika: SIEMENS SINUMERIK 840 D POWERLINE, razdalja med vreteni: 900 mm, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine within one of the following timeframes: between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026. Dodeym A S Ijpfx Apljut TECHNICAL DETAILS Maximum main spindle speed: 5,000 rpm Maximum sub spindle speed: 3,200 rpm Swing diameter: 270 mm Turning diameter: 120 mm Maximum bar diameter: 100/104 mm Spindle bore diameter: 118 mm Spindle distance: 900 mm X1-axis travel: 290 mm Z1-axis travel: 650 mm X2-axis travel: 180 mm Z2-axis travel: 650 mm Y1-axis travel: ±40 mm Z3-axis travel: 670 mm X3-axis travel: 175 mm Rapid traverse speed X/Z-axis: 30 m/min Rapid traverse speed Y-axis: 15 m/min Number of tool turrets: 2 Number of tools per turret: 12 All turret positions are powered MACHINE DETAILS CNC control: SIEMENS SINUMERIK 840 D POWERLINE Dimensions & Weight Dimensions (L x W x H): 5,500 x 2,500 x 2,500 mm Machine weight: 11,000 kg Operating hours: 88,040 h Spindle hours: 43,558 h EQUIPMENT Chip conveyor Foot switch Note: The machine has the following defects: - The B-axis is defective (located on turret 1) - Guideways and drives show age-related wear - The X2-axis (guide rails) runs slightly misaligned by approx. 0.03 mm (re-measurement required) - Setting axis reference values in the controller does not work - After hydraulic pump failure, a replacement pump was installed and is now operating as a separate unit outside the machine External reference: Bilstein – Lot 2

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, obratovalne ure: 39.361 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: 07510001241, stružna dolžina: 1.185 mm, premer struženja: 640 mm, največja hitrost vretena: 12.000 obr/min, teža obdelovanca (maks.): 150 kg, model krmilnika: SIEMENS SINUMERIK 840 D, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the machine within the specified period, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Swing diameter: 640 mm Maximum turning diameter: 640 mm Maximum turning diameter (sub spindle): 400 mm Spindle distance: 1,500 mm Turning length: 1,185 mm Max. workpiece weight: 150 kg Slide travel X1: 550 mm Slide travel Y1: 180 mm Slide travel Z1: 1,185 mm Slide travel B1: 240° Slide travel X2: 180 mm Slide travel Z2: 1,050 mm Slide travel Z3: 1,150 mm Max. milling spindle speed: 12,000 rpm Max. main spindle speed: 4,000 rpm Max. sub spindle speed: 3,200 rpm Dedpfx Apeym A D Roljut Rapid traverse speed, Slide 1 (X/Y/Z): 40 / 24 / 70 m/min Rapid traverse speed, Slide 2 (X/Z): 24 / 36 m/min Rapid traverse speed, Slide 3 (Z): 36 m/min Tool interface: HSK 63 Number of tool positions in chain magazine: 40 MACHINE DETAILS Control: SIEMENS SINUMERIK 840 D Dimensions & Weight Dimensions (L x W x H): 7,800 x 4,100 x 3,040 mm Machine weight: 16,500 kg Operating hours: 72,899 h Spindle hours: 39,361 h Bar feeder Model: COCCHE GIOVANNI CNC-DB 110 Year of manufacture: 2008 Serial number: CNCDB-08.306 Weight: 1,500 kg Note: The machine has the following defects: - The hydraulic unit is faulty and needs to be repaired - The Q2 axis (milling spindle tool changer) malfunctions frequently - The X2 axis (guide rails) is slightly misaligned - Guides and drives are worn consistent with age External Reference: Bilstein- Lot 1

Stanje: rabljeno, Leto izdelave: 2000, Revolver 1 – Čelno/vzdolžno struženje 155/280 mm Duedpfxsy Hppzj Aplst Revolver 2 – Čelno/vzdolžno struženje 82/120 Gildemeister Sprint 65 mm Vrtina vretena (glavno vreteno) 79 mm (s kleščnim vpenjanjem 65 mm) Vrtina vretena (podvreteno) 65 mm (s kleščnim vpenjanjem 42 mm) Vrtljaji vretena 25-5000 obr./min (glavno vreteno) C-os – 5000 obr./min Revolver z 8 postajami Krmiljenje: Siemens Sinumerik 840 C Opremljeno z: Magazin za nalaganje palic proizvajalca Simag model 65.1 – 3200 mm – leto 2000 Transportni trak za ostružke Razni nosilci orodij

Stanje: rabljeno, Leto izdelave: 1998, obratovalne ure: 97.593 h, Funkcionalnost: popolnoma funkcionalen, premer struženja: 65 mm, izvrtina vretena: 79 mm, največja hitrost vretena: 4.500 obr/min, hitrost vretena (min.): 25 obr/min, For sale: Gildemeister MF Sprint 65 CNC Lathe with 3-meter bar feeder, as shown in the pictures. The machine was dismantled from our workshop in fully functional condition. A video of the machine in operation prior to disassembly can be provided upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (main spindle side) were renewed, including bearings and belts. A new HMI interface was recently installed. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DETAILS Control: Sinumerik 840C Bar feeder: SIMAG 65.1-3200G, Year 1998 Bar length: 3 m Bar diameter/spindle bore: 65 mm Main drive Drive power: 28 / 21 kW Speed range: 25 – 4,500 rpm Torque: 320 / 240 Nm Thread cutting rapid feed rate: max. 10 m/min C-axis speed: 120 rpm C-axis torque (holding torque): 180 Nm Tool turret Number of tools: 8 Shank Ø according to DIN 69880: 30 mm Number of driven tool stations: 4 Power: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Djdpfjwym Nfsx Apleut Tool turret 1 speed: max. 4,000 rpm Tool turret 2 speed: max. 4,000 rpm Slide 1 Cross travel / longitudinal travel: 155 / 280 mm Rapid traverse speed X/Z: 22.5 / 22.5 m/min Feed force X/Z: 900 / 900 daN Ball screw pitch X: 15 × 25 mm Ball screw pitch Z: 15 × 32 mm Slide 2 Cross travel / longitudinal travel: 82 / 120 mm Rapid traverse speed X/Z: 22.5 / 22.5 m/min Feed force X/Z: 900 / 900 daN Ball screw pitch X/Z: 15 × 25 mm MACHINE DETAILS Dimensions incl. bar feeder and chip conveyor (L×W×H): approx. 6 × 2 × 2 m Weight: approx. 6.5 t Operating voltage: 50 Hz, 400 V EQUIPMENT - Coolant system - Chip conveyor - Documentation

Stanje: dober (rabljeno), Leto izdelave: 2008, dolžina podajanja os X: 575 mm, dolžina pomika po osi Y: 90 mm, dolžina podajanja os Z: 300 mm, L.-Nr. 3.2-115 1 gebrauchte CNC-Drehmaschine GILDEMEISTER Modell CTV 160, Baujahr 2008 Siemens 840D Steuerung 3-Backenfutter Späneförderer Kühlmitteleinrichtung Technische Daten: Drehdurchmesser: 160 mm X: 575 mm Z: --- mm Y: 300 mm / +-90 mm Drehzahlbereich: 6.000 U/min Maschinengewicht ca.: 6.000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich. --- 1 used CNC lathe GILDEMEISTER type CTV 160, year of manufacture 2008 Siemens 840D control 3-jaw chuck Chip conveyor Coolant system Duedpfxoubvv Tj Aplst Technical details: Turning diameter: 160 mm X-axis travel: 575 mm Z-axis travel: --- mm Y-axis travel: 300 mm / ±90 mm Spindle speed range: 6,000 rpm Machine weight approx.: 6,000 kg Technical data, accessories and machine description are non-binding.

Stanje: novo, Leto izdelave: 2024, Zaščitna plošča iz varnostnega stekla za Gildemeister CTX Beta 500 V4, artikel popolnoma nov, neuporabljen, v originalni embalaži. Duodpfeyx U Sljx Aplet

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, obratovalne ure: 8.513 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8042942323C, Ponujamo to obnovljeno CNC stružno-rezkalno centro Gildemeister CTX 310 V4 s krmiljenjem SIEMENS 840 D SHOPTURN, letnik 2006. Stroj je redno vzdrževan in pripravljen za transport. Vključen je obsežen komplet orodja, vključno z omarami za orodje in merilnimi napravami. Leto izdelave: 2006 Teža: 3950 kg Maksimalno število vrtljajev vretena: 6000 vrt/min Priključna moč: 26 kVA Maksimalni priključni tok: 35 A Tok: 38 A Omrežna napetost: 400 V Frekvenca: 50/60 Hz Krmilna napetost: 230 V Djdjyvfq Sopfx Aplsut Poraba krmilne elektrike: 150 W Napetost v notranjem krogu: 24 V Za dodatna vprašanja ali več informacij nam pišite ali nas pokličite.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, obratovalne ure: 5.137 h, največja hitrost vretena: 6.000 obr/min, potovalna razdalja osi X: 202 mm, pomik po osi Z: 450 mm, moč vretenovega motorja: 12.000 W, skupna višina: 1.730 mm, skupna širina: 1.563 mm, skupna masa: 3.500 kg, proizvajalec krmilnikov: SIEMENS, model krmilnika: Sinumerik 840D powerline, največja dolžina izdelka: 4.000 mm, število osi: 3, This 3-axis Gildemeister CTX 310 was manufactured in 2003. It features a maximum turning diameter of 246 mm and a turning length of 445 mm. The machine is equipped with a spindle power of 12 kW and a maximum spindle speed of 6000 rpm. If you are looking for a high-quality lathe, you should consider the Gildemeister CTX 310 horizontal turning machine we have for sale. Contact us for further details. • Availability: 2 units available • Spindle • Nose: FL 140 h5 Duodeympcaspfx Aplst • Maximum torque: 115 Nm (153 Nm at 40% S6) • Bore: 69 mm • Chuck diameter: 170 mm (optionally 210 mm) • Bar capacity: Ø 50 mm • Working area • Swing over bed: 500 mm • Maximum turning diameter: 246 mm • Maximum turning length: 445 mm • Distance between centres: 600 mm • Turret and tools • Turret type: VDI 30 • Tool stations: 12 • Driven tool speed: 4200–5000 rpm (depending on control: Fanuc/Siemens/Heidenhain) • Driven tool power: 3.3–4.4 kW • Feed and axes data • Rapid traverse (X/Z): 24/30 m/min • C-axis rapid traverse: 100 rpm • Feed force (X/Z): 450 daN • Resolution (X/Z): 0.001 mm • Bed • Inclination: 45° • Material: cast iron • Electrical and auxiliary equipment • Supply voltage: 400 V (±10%), 50 Hz • Total installed power: 24 kVA • Hydraulic system pressure: 50 bar • Coolant tank capacity: 175 litres • Control systems (options): GE-FANUC 21i-TB, Siemens 840D, Heidenhain 4290 E Additional equipment • Chip conveyor (both units) • Extraction system (one unit)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, število osi: 2, Ta Gildemeister MF twin 65 je bila izdelana leta 1996. Opremljena je z dvema revolverskima glavama, vsaka z 12 orodnimi postajami, ki so vse lahko motorizirane. Vključuje 14 pogonskih orodij in 14 držal za orodje. Stroj ima obe vreteni v zelo dobrem stanju in prehodnost palic 65 mm, dopolnjeno z avtomatskim podajalnikom palic Cucchi Pietro. Za več informacij o stroju nas kontaktirajte. • 2 revolverski glavi (12 + 12 orodnih postaj), vse motorizirane Dedpfsyaqr Aex Apljut • Prehodnost palic: 65 mm • Obe vreteni v zelo dobrem stanju • Nova hidravlična/pogonska črpalka Dodatna oprema • Avtomatski podajalnik palic Cucchi Pietro • 14 pogonskih orodij • 14 držal za orodje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, obratovalne ure: 29.200 h, This Gildemeister Sprint 20-8 was manufactured in 2010. It features a cooling system with a 600 L capacity and a 50 µm filter, as well as a high-pressure pump with selectable 8 or 20 bar. The machine is equipped with a Bristol B270/E oil mist separator and an IEMCA Boss 332E bar feeder for 3-metre bars. With a chip discharge height of 1,250 mm, it is designed for efficient operation. Contact us for more information about this machine. Specification • Control system: Fanuc 310i-S • Mechanical and electrical pre-installation for fire extinguishing unit • Coolant system suitable for oil (max. 32 cSt) and emulsion • Coolant tank capacity: 600 litres • Coolant filtration: 50 µm • Coolant chiller unit • Coolant pump pressure: 8 bar • Coolant pump pressure: 20 bar • Chip conveyor • Chip discharge height: 1250 mm • Bar feeder: IEMCA Boss 332E • Maximum bar length: 3 m • Oil mist separator: Bristol B270/E • Travel of movable spindle stock: 80 mm • Tool carriage with turret tooling • Tool breakage detection system • Machine commissioning (max. 3 days) • Spindle bore: 25 mm (retrofit) • Machine operating hours: 29,200 h Advantages of the machine Technical advantages Duodpfx Apjx D H I Tslot • Chip discharge height: 1250 mm Additional information Machine still under power

Stanje: rabljeno, Leto izdelave: 2007, CNC stružno-rezkalni center CTX 410 - leto izdelave 2007 Krmiljenje Heidenhain Plus IT - 3-čeljustni vpenjalni tulec - Pogonska orodna mesta - Konjiček - Transporter za ostružke Dedpfx Aoxy Nqcsplout - Rezervoar za hladilno tekočino

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2006, CNC stružnica GILDEMEISTER CTX 420 linear S krmilnikom Siemens 840 D powerline Leto izdelave: 2006 Največji obdelovalni premer: 324 mm Največja obdelovalna dolžina: 600 mm Največji premer obratovanja: 680 mm Vretenova odprtina: 79 mm Dsdpfx Apoxzt Dcsleut Največje število vrtljajev vretena: 4500 vrt./min Sledeća oprema: Drsna zaščita z notranjo osvetlitvijo 12-pozicijski revolver z 12 gnanimi postajami Y os, C os Naprava za merjenje orodij Naprava za odjem delov 3-čeljustna hidravlična vpenjalna glava Ø 210 mm s stopalko Hainbuch hidravlična vpenjalna tulec IRCO Breuning RBK 10012 podajalnik palic Signalna luč Konjiček s pinolo Transportni trak za odrezke Odsesavanje oljne meglice Hladilna naprava z IKZ in tračnim filtrom Navodila za uporabo

Stanje: rabljeno, Parts donor We are dismantling the CNC lathe GILDEMEISTER type GDM 42/2A CNC control: Eltropilot EPL 2 Machine no.: 4.5733 Year of manufacture: 1989 Machine not operational – electrical issues Standard turning diameter: 185 mm Max. swing diameter: 400 mm Cross slide travel = facing path: 190 mm Dodpfxjdzqm Rj Aplout Longitudinal slide travel = longitudinal path: 450 mm Spindle bore in turning spindle: 52.7 mm Spindle passage in draw tube: Ø 42 mm Feed rate X and Z axes: max. 3000 mm/min Spindle speed: 40-6300 rpm, stepless Spindle drive motor power: 22 kW Mains connection: 400 Volt, 50 Hz, 45 kVA - Hydraulic 3-jaw chuck FORKARDT Ø 200 mm - 12-position tool turret, VDI 40, every second station powered - 6 powered tool positions - Electrical cabinet included, standing separately Footprint of complete machine (L x W x H): 5000 x 2500 x 2100 mm Total weight: approx. 5.7 tons Good condition Transport dimensions: Basic machine space requirement (L x W x H): 3000 x 2300 x 1900 mm Basic machine weight: approx. 4.8 tons Electrical cabinet space requirement (L x W x H): 2500 x 550 x 2000 mm Electrical cabinet weight: approx. 450 kg Without chip conveyor Main motor missing Individual parts available upon request

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, DMG Gildemeister CTX 500 Alpha V6 - Letnik izdelave: 2011 - Krmiljenje: Siemens 840D shop turn - Protipremer - z Y-osjo in C-osjo - Revolver: 12-pozicijski motoriziran VDI 30 Dodatna oprema: Duodpfx Asylkuuoplst - Hidravlična vpenjalna glava - Transportni trak za odrezke - Naprava za hlajenje - Vmesnik za podajalnik palic - Lovilec obdelovancev s transportnim trakom

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, obratovalne ure: 21.600 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 80439430900, premer struženja nad prečnim suportom: 465 mm, premer struženja: 680 mm, največja hitrost vretena: 3.500 obr/min, potovalna razdalja osi X: 300 mm, pomik po osi Z: 1.050 mm, razdalja med središči: 1.150 mm, TEHNIČNI PODATKI Maks. hitrost vretena: 3.500 min⁻¹ Razdalja med konicama: 1.150 mm Višina konic: 360 mm Pomik osi Z: 1.050 mm Pomik osi X: 300 mm Premer struženja nad posteljo: 680 mm Premer struženja nad sani: 465 mm Hitri pomik osi Z: 30 m/min Hitri pomik osi X: 30 m/min Ločljivost merilnega sistema linearnih osi X in Z: 0,001 mm Maksimalna teža med konicama: 350 kg Stožčasta vpenjalna konica: MK 5 Duodpfjyw H E Uox Aplot PODROBNOSTI O STROJU Obratovalna napetost: 400 V Frekvenca: 50 Hz Obratovalni tok: 80 A Teža stroja: 7.500 kg OPREMA Samospennjeno vpenjalo Röhm (Röhm Duro-NC 260/3) Nosilci orodja

Stanje: dober (rabljeno), Leto izdelave: 1997, - Krmiljenje: SIEMENS SINUMERIK 840-C - Maks. premer palice: 65 mm - C-os Dujdpfexa Epbex Aplet - Hitrost glavnega vretena: 31 - 6.300 1/min - Revolver 1: 8 postaj, od tega 4 pogonske - Revolver 2: 8 postaj, od tega 4 pogonske - Hitrost pogonjenih orodij: 4.000 1/min - Oba revolverja z notranjim hlajenjem - Visokotlačna naprava - Transporter ostružkov - Podajalnik palic IRCO SiMag 65 - Maks. dolžina palice: 3200 mm Dimenzije D x Š x V: - Stroj 3400 x 1700 x 1800 mm - Podajalnik palic 4000 x 1000 x 1400 mm - Transporter ostružkov 3000 x 1100 x 1600 mm Skupna teža: ca. 6.000 kg

Stanje: rabljeno, Leto izdelave: 2005, Tehnične podrobnosti: Premer kroženja: 320 mm Krmiljenje: 840 D SIEMENS Število obratov: 5000 1/min Dujdpfxomcibwj Aplet Motor vretena: 20 / 27 kW Premer vpenjalne glave: 250 mm Pomik - x: 650 mm Pomik - z: 300 mm Revolverska glava: 12 pozicij Nosilec orodja: VDI 40 Hitrost orodja: 4000 1/min Moč pogona orodja: max. 11,7 kW Teža stroja pribl.: 8 t CNC vertikalni stružni stroj desne izvedbe, Pogonjena orodja, C-os, Visokotlačna črpalka 20 bar, 500l, filter Razpršilna pištola, 3-čeljustna vpenjalna glava, EWAB nakladalna postaja desno, Transportni trak za odrezke Števci: pribl. 23.500 ur vklopa, pribl. 8.000 ur vretena (skupaj) STROJ SE DOBAVI Z OBNOVLJENO VRETENO (0 ur)

Stanje: rabljeno, Leto izdelave: 2003, Tehnični podatki: Premer obhoda: 680 mm Razdalja med konicama: 1000 mm Število obratov: 2800 min⁻¹ Vpenjalna glava: ø300 mm Mere ca.: 5560 x 2400 x 2130 mm Teža ca.: 10.000 kg Oprema: - Krmiljenje: Heidenhain CNC Pilot 4290 - 12-pozicijski revolver VDM 40 Duedpfjyfnqgjx Aplet - C-os

Stanje: rabljeno, Leto izdelave: 2003, Maximum turning diameter: 246 mm Turning length: 600 mm Control system: 840 D Powerline Siemens Swing diameter over bed: 400 mm Swing diameter over cross slide: 300 mm Centre distance: 600 mm Main spindle speed range max.: 6,000 rpm Main spindle drive power: 16 kW Max. torque: 155 Nm Spindle diameter at front bearing: 100 mm Spindle bore: 68.5 mm Spindle nose: 140H5 Counter spindle speed range max.: 4,000 rpm Counter spindle drive power: 7.5 kW Max. torque: 48 Nm Spindle diameter at front bearing (counter spindle): 75 mm Spindle bore (counter spindle): 37 mm Spindle nose (counter spindle): 140H5 Number of tool stations: 12 positions Number of driven tool stations: 12 positions Driven tool speed range max.: 5,000 rpm Driven tool drive power: 3.7 kW Max. torque (driven tools): 24 Nm Tool holder: VDI 30 Tool shank: 20 x 20 mm X-axis travel: 160 mm Z-axis travel: 450 mm Rapid traverse X: 60 m/min Rapid traverse Z: 45 m/min Feed force X: 2.5 kN Dodpfxjypv Tqs Aplsut Feed force Z: 4 kN Rapid traverse C: 200 rpm Max. torque C: 155 Nm Total power requirement: 32 kVA Machine weight approx.: 3.8 t Required floor space approx.: 8.0 x 3.0 x 2.7 m CNC turning and milling centre GILDEMEISTER - CTX 320 linear V5 - Main and counter spindle - Driven tool capability - C-axis - ShopTurn

Stanje: rabljeno, Leto izdelave: 2007, proizvajalec krmilnikov: Siemens, model krmilnika: 840 D, Description: General: Year of manufacture: 2007 Control: Siemens 840 D Bar capacity: 65 mm Turning diameter: 250 mm Turning length: 650 mm Main spindle: Technology: Motor spindle Speed: 5,000 rpm Max. power: 35 kW Max. torque: 370 Nm C-axis: 0.001° Bar capacity: 65 mm Chuck: Hainbuch Spanntop size 65 Chuck cylinder: Hollow clamping cylinder Sub spindle: Technology: Motor spindle Speed: 5,000 rpm Power: 26 kW Torque: 290 Nm C-axis: 0.001° Chuck: Hainbuch Spanntop size 65 Chuck cylinder: Semi-hollow clamping cylinder Z-axis: 670 mm Dedeyamfljpfx Apleut X-axis: 175 mm Turret I (X/Y/Z): Technology: Tool turret, 12 stations Tool holder: VDI 30 Driven tools: 4,000 rpm, 11 kW, 28 Nm X-axis: 300 mm Y-axis: 80 mm (+ / - 40 mm) Z-axis: 650 mm Turret II (X/Z): Technology: Tool turret, 12 stations Tool holder: VDI 30 Driven tools: 4,000 rpm, 11 kW, 28 Nm X-axis: 180 mm Z-axis: 650 mm Equipment / Accessories: Chip disposal: Chip conveyor Coolant supply: High-pressure coolant system Measuring systems: Direct in all X-axes (glass scales) Bar feeder: IRCO Breuning Parts discharge: Finished parts gripper + transfer belt Emulsion mist separator: Mechanical Setup mode: Electronic handwheel

Stanje: rabljeno, CNC control system, numeric control, from MAX MÜLLER GILDEMEISTER MD 5S, type Eltropilot M Year of manufacture: approx. 1980 Rack with 20 module slots – 12 modules installed Installed modules: 1 piece 0.651.406-19.3 UNI Universal Interface 1 piece 0.650.847-56.1 O32 Output Card 2 pieces 0.651.708-57.3 I32 Input Card 1 piece 0.652.138-36.1 APC Dsdpjflrtxjfx Apleut 1 piece 0.651.928-25.3 LAB Position Control 1 piece 0.651.400-22.3 1 piece 0.860.204-59.1 B32 1 piece 0.652.128-35.0 RE4 1 piece 0.651.269-26.0 ITY Serial Interface 1 piece 0.651.974-23.2 ABS Termination Card 1 piece 0.651.298-18.3 CPU Central Processor Dimensions (W x H x D): 480 x 260 x 220 mm Weight: 7 kg Individual cards available on request.

Stanje: rabljeno, Tool Presetting Device GILDEMEISTER-DE VLIEG Type EGS 5045 / Microset DPS 100 Serial No. 83-10-102 Year of manufacture: 2002 Travel range X-axis: approx. 400 mm Travel range Z-axis: approx. 400 mm Tool holder on mounted rotary table: Ø 50 mm Pitch circle diameter of tool holders on mounted rotary table: Ø 340 mm Internal taper on mounted rotary table: Ø 245 mm Tool holding plate as rotary table with 8 mounting holes Ø 50 mm Centering diameter of installed tool holding plate: Ø 102 mm Rotatably mounted flange holder with centering diameter: Ø 102 mm Rotatably mounted flange holder with outside diameter: Ø 155 mm Rotatably mounted flange holder with 3x M10 mounting holes, pitch circle: Ø 130 mm Power supply: 230 Volt, 50 Hz - Measuring electronics Microset DPS 100 - Rotary table with 8 tool positions - Interfaces: 1x RS232, 2x measuring system (X/Z) - Profile projector with screen Ø 100 mm, magnification 20x and two circular ground glass plates - Fixed ground glass with crosshairs - Axis movement via manual rapid adjustment with pneumatic clamping - Fine adjustment via handwheels Duedpfxehbal Dj Aplot - Rotatable rotary table with pneumatic clamping - Metal base with 3 drawers Required space (L x W x H): 1100 x 1000 x 800 mm Weight: 400 kg In good condition

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, obratovalne ure: 2.859 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 600 mm, premer struženja: 290 mm, Univerzalni stružnica – GILDEMEISTER CTX Leto izdelave: 1993 Obratovalne ure: 2.859 h Dodpeyxgi Njfx Aplout • Revolverski nosilec orodij s 12 postajami • Največja hitrost vretena: 5.000 obr/min • Največji premer struženja (os X): 290 mm • Največja dolžina struženja (os Z): 600 mm • Hidravlična trije-čeljustna glava, Ø 200 mm • Premer izvrtine vretena: Ø 66 mm • Vključen transporter odrezkov Stroj je v zelo dobrem stanju in je bil uporabljan v tehnični izobraževalni ustanovi.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, obratovalne ure: 11.600 h, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 107 mm, največja hitrost vretena: 4.000 obr/min, skupna masa: 10.000 kg, model krmilnika: Siemens 810D, Oprema: transportni trak za ostružke, DÉTAILS TECHNIQUES Diamètre de rotation max. : 680 mm Diamètre de rotation au-dessus du guidage X : 565 mm Course longitudinale : 1 300 mm Course transversale : 315 mm Nez de broche : h5 Diamètre de la broche dans le roulement avant : 150 mm Alésage de broche : 107 mm Couple max. : 600 Nm Vitesse de broche : 4 000 tr/min Diamètre du mandrin : 315 mm Avance rapide axe X : 60 m/min Avance rapide axe Z : 45 m/min Tourelle porte-outils pour : 12 outils Outils entraînés : 12 Fixation des outils : VDI 40 Course de la contre-pointe : 120 mm Cône de la contre-pointe : CM 5 Dodpfjymn Ibox Aplout DÉTAILS DE LA MACHINE Commande : Siemens 810D Dimensions & Poids Dimensions machine avec convoyeur à copeaux (L x l x h) : 5 700 x 2 600 x 2 210 mm Poids de la machine : env. 10 000 kg Heures de fonctionnement Heures de marche : 47 781 h Heures de broche : 11 600 h ÉQUIPEMENT Lunette hydraulique, plage de serrage 30-245 mm Convoyeur à copeaux Mandrin de serrage KNCS-N 315-91