Gannomat Junior 323 nakup rabljenega (58)

Stanje: novo, Leto izdelave: 2026, Univerzalni masivni lesni vrtalni stroj za izdelavo okvirjev in dolgorezne naloge. Kratek opis: • Univerzalno področje uporabe: izdelava okvirjev, vhodnih vrat, oken ter za dolge reze... • Globina vrtanja do 150 mm (večja globina po izbiri) • Pnevmatska nastavitev višinskega položaja za 2 nivoja 0-100 mm, nastavljiva preko mehanskih digitalnih števcev Kodpsdx R D Sofx Adkoww • Vrtanje na dveh nivojih v enem vpenjanju obdelovanca • Pnevmatske sponke za obdelovanec • Več-vretenaste vrtalne glave (opcija) • Pnevmatski podajalnik vrtanja (opcija) • Mobilno preko podvozja (opcija) ali z ročnim viličarjem

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND MORTISE BORING MACHINE Completely in standard configuration as per price list 01/22/D with: - Precision collet chuck for ER 40 collets, diameter 3–26 mm. Including collets Ø 10 / 13 / 16 / 20 mm - Motor 1.5 kW, 2800 rpm - Position adjustment via digital counter - Position adjustment for 2 levels, pneumatic (0–100 mm) - Maximum drilling depth 150 mm - Precision indexing rail with 12 mm increments, featuring: - Central detent and transverse adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete stop system, consisting of: 1 central stop and 1 stop for extra-wide frames 1 stop bar, approx. 850 mm long (can be repositioned from left to right) 2 flip stops - Lowerable mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5 kW) Extraction funnel, diameter 80 mm, dust-tested Central mitre stop 45° Pair of auxiliary workpiece supports, swiveling (left and right) Drilling head mount 3-spindle drilling head, 32 mm pitch (can be rotated 90°) Undercarriage with 4 wheels for easy movement of the machine Kwjdpfxjxdttis Adksw Availability: Short term – immediately –

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, Dowel and slot mortising machine GANNOMAT JUNIOR 320 LBM Very good, nearly new condition. The machine comes from a very small joinery and has had very little use. The machine is in its original state; only cleaned, with the paintwork untouched. Kwjdpfx Adsynv E Rekow With this machine, you can mill elongated slots and drill dowel holes on two levels without reclamping. 380V, 1500W Speed: 2800 rpm Year of manufacture: 1993 With this machine, you can mill elongated slots for lock cases, for example, and similar applications, or create all types of frame dowel joints—right-angled, butt, and mitre joints. Ideal for dowel joints in timber frame construction, furniture, door, window, and staircase production, as well as similar applications. Thanks to drilling on two levels, the index rails, stops, and the machine’s setup, dowel joints can be produced in the shortest time, making the machine highly efficient. Requires a compressed air supply of 6 bar (very low air consumption). Right-hand rotation. Mills and drills very well and cleanly. Comes with 2 angle stops (a centre stop and a side stop, which can be used on either side). Also includes a mitre stop. At the front of the machine table, there is a 2000mm-long guide rail with two flip stops. The rail can be shortened or extended as needed. Workpieces are clamped using 2 pneumatic clamping cylinders. Height adjustment between drilling levels is also pneumatic. The pneumatic switch is at the front of the machine, enabling quick adjustment of indexing and drilling levels. Fitted with a precision 12mm indexing rail, featuring a centre position and 12 positions to the left and right. Can be quickly converted for slot-milling; the machine can then be used without the indexing system and with two adjustable stops left and right, offering a maximum working width of 420mm. Maximum drilling height: 100mm Maximum drilling depth: 150mm with stop and scale Maximum workpiece height: 160mm Everything works perfectly. We offer nationwide delivery and demonstration within Germany for 220.00 EUR, so you bear no risk when purchasing. Delivery to Austria and other EU countries available on request. Machine table width: 870mm; depth at sides: 140mm; depth at center: 350mm Professional-grade equipment, not DIY store quality. Ready for immediate use. Fitted with 2-jaw drill chucks up to 20mm. Very robust and durable construction. The precision linear guides with backlash-free ball bearing bushings are fine and operate smoothly.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 24.058 h, moč: 7 kW (9,52 KM), vhodna napetost: 480 V, vhodni tok: 10 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, potovalna razdalja osi X: 1.000 mm, dolžina obdelovanca (maks.): 4.000 mm, širina obdelovanca (maks.): 1.000 mm, višina obdelovanca (maks.): 60 mm, teža obdelovanca (maks.): 70 kg, število osi: 3, vrsta aktuacije: pnevmatičen, skupna višina: 1.430 mm, skupna dolžina: 2.300 mm, skupna širina: 1.500 mm, skupna masa: 1.100 kg, dolžina mize: 3.300 mm, širina mize: 1.000 mm, Oprema: CE označba, dokumentacija / priročnik, Gannomat 570 ProTec T2, BK6, vrtanje, utorni rez, še vedno priključen za predstavitev, v dobrem stanju. Idealni stroj kot dopolnitev CNC-obdelovalnemu centru za učinkovitejšo izdelavo korpusov z najkrajšimi nastavitvenimi časi že od serijske proizvodnje po kosih. Prav tako je zelo primeren kot začetniški stroj za CNC-tehnologijo obdelave po ugodni začetni ceni za manjše in majhne mizarje za učinkovito in čisto izdelavo korpusov. Možne uporabe so na primer: oblikovno in trdno, pa tudi brez tolerance spoji, kot so mozni povezavi, vrtanje vrst lukenj, vrtanje za okovje kot so pohištvene tečaje, izvrtine za ključe, razna vezna okovja kot Rastex, Cabineo in številne druge. Priloženo je: priročnik z elektro shemo, izbor svedrov in cev za odsesavanje. Stroj je hitro pripravljen za nakladanje, stoji na ravni tleh. Kwsdpfxoytxpvj Adkew

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, MACHINING CENTER GANNOMAT "PROTEC 0571" Working Width 1300 Drilling, Grooving, Milling Base machine complete in standard configuration according to price list 01/19/D: Detailed technical data see data sheet for PROTEC Type 0571 - Machining unit equipped with: PowerBlock with 21 spindles and 1 slotting saw (BK 1341) - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y-axis - 2 horizontal drilling spindles in X-axis - 1 grooving unit in Y-axis 4th drilling axis in Y - Profit F3 HSK63F milling unit with triple magazine for automatic tool changer, motor 5.5 kW (S1), 1,000-20,000 rpm with frequency converter, right and left rotation, HSK63F tool holder with 462E collet, milling cutter length up to 130 mm. - INCLUDES OPTION: Additional safety device with lamella curtain for processing Lamello P-System. Prerequisite for horizontal milling for Lamello P-System with groove cutter Ø 100.4 x 7 x 30 mm. - Workpiece sizes and weights: Kwjdpfxsw Sguwj Adkew - Workpiece width (X): min. 60 mm / max. 1300 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 263 mm in through-feed mode, max. 5,600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg - Air connection: 7 bar Machine No. 435.046 Electrical connection: (400V, 3Ph, 50Hz, (12kVA, 17.5A) - Top pressure device for working width 1300 mm - Roller table 765 mm (Y-axis), foldable, for machine front, width 500 mm - Roller table 765 mm (Y-axis), foldable, for machine rear, width 500 mm - Auxiliary stop 600 mm with integrated rollers for roller tables - Extraction manifold Ø 160 mm / Ø 80-80-80 mm, pitch 196 mm - Documentation in German language: User manual: GERMAN Programming manual: GERMAN Operator software: GERMAN Operating system: ENGLISH Keyboard: GERMAN Location: ex-stock 54634 Bitburg - Immediately available -

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, - NEW - Make: Ganner Gannomat Model: SELEKTA 253 220 V, 1 Ph, 50 Hz Complete in standard configuration with: - Fully automatic electronic control with program selector switch for RINSING-GLUING-GLUING/INSERTING - Dowel feed via electronic vibrating feeder with potentiometer for stepless adjustment of dowel feed rate - Automatic dowel diameter and dowel length control with Auto-DL-Select system (automatic ejection of incorrect dowel lengths +/- 5 mm into the collection container) - Closed glue system with 6 bar glue pressure via glue nozzle for adhesives with a viscosity of 150 to 350 mPas - Stepless electronic glue quantity adjustment with potentiometer via time preselection through electronic control - Selector switch GLUE/WATER for rinsing/cleaning the glue system with EasyClean function button (automatic cleaning program for glue hose and glue nozzle via spray funnel and wastewater collection container) - Control lamp for residual glue level display in the glue container - 1 stainless steel container for 5 kg glue and 1 stainless steel container for 5 l water for rinsing/cleaning - 4 castors for moving the machine Including 1 pistol for dowels Ø 8 mm, dowel length 25 - 40 mm, driving projection 7 - 20 mm Kjdpsdwi Rkjfx Adkeww Air connection: 6 bar Price from €11,750 ex stock 54634 Bitburg

Stanje: rabljeno, Leto izdelave: 2019, Machine construction type: Through-feed/Return Processing size in X-direction: 1300 mm Processing size in Y-direction: 5600 mm Processing thickness (Z-dimension): 60 mm Number of main spindles: 1 pc Main spindle power: 5.5 kW Main spindle speed: 1,000–20,000 rpm Clamping system: HSK-63 F Tool changer: Pick-up changer Tool change positions: 3 pcs Rear wall groove units: fixed in Y-direction Vertical drilling spindles – in X-direction: 3 pcs Vertical drilling spindles – in Y-direction: 10 pcs Kedpfeymp N Tsx Adkjww Horizontal drilling spindle in X-direction: 2 pcs Horizontal drilling spindle in Y-direction: 6 pcs Control type: PC control Operating system: Windows Typewriter keyboard: Yes Mouse: Yes Programming system: Gannomat Editor DXF interface: Yes Office version available: Yes Online connectivity possible: Yes Table type: Fixed, smooth table Central lubrication: automatic Tools: various tools Operating hours: 920 hours Weight approx.: 1,800 kg Extraction diameter: 3x80 mm Machine was modernized at the factory, pressure beam and control technology from model 0572! Location: Customer

Stanje: dober (rabljeno), Leto izdelave: 1998, Universal frame dowel and slot mortising machine with angle adjustment Specially designed for staircase and window construction, as well as universal use thanks to pneumatic height adjustment. Angled doweling and spindle boring are easily accomplished with the swiveling drilling unit. Motor with two-speed pole-change switch Motor power: 1.0 / 1.5 kW, 1400 and 2800 rpm Motor started via convenient handle switch Equipped with Röhm two-jaw chuck, 1 - 20mm Linear laser for precise positioning of the workpiece Drilling unit can be swiveled 65° to both left and right Pneumatic adjustment of working height, enabling doweling on two levels without resetting. Desired drilling heights for each drilling level can be set using a digital counter; switching between levels is carried out pneumatically from the front Cross adjustment 340 mm, stepless or in 12 mm increments, with detent rail Pneumatic clamping possible at any position, front operated Maximum height adjustment approx. 100 mm above table height Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, 1 clamp column can be repositioned to the front 2 swiveling workpiece supports Extraction funnel Center stop + 1 side stop Fixed mitre stop Length stop as round bar Assortment of drill bits Operating manual CE mark Machine has been partially repainted due to existing paint splashes Pneumatic hoses replaced Dimensions approx. 1200 x 1350 x 1600 mm (LxWxH), weight 380 kg. The machine can be demonstrated at our facility by appointment. We only offer machines that are available for demonstration at our warehouse; see "more offers from this dealer." Kwsdpfx Aexmatnjdkjw

Stanje: rabljeno, Leto izdelave: 1999, številka stroja/vozila: 1088.968, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 55 h, skupna širina: 700 mm, skupna dolžina: 900 mm, skupna višina: 650 mm, skupna masa: 70 kg, število vreten: 5, Ponujamo ta rabljeni stroj za vrtanje okovja Gannomat Modell204, letnik 1999. Proizvajalec: Gannomat Model: Modell204 Kwodpfx Asyak Hyodksw Letnik: 1999 Stanje: rabljeno ID kategorije: 659 ID tipa: 2533 Tip stroja: stroj za vrtanje okovja Za vprašanja ali dodatne informacije nam pošljite sporočilo ali nas pokličite.

Stanje: rabljeno, Leto izdelave: 2022, New exhibition machine! List price: €14,200.- 400V, 3Ph, 50Hz / 1.5 kW Complete in standard configuration with: - Fully automatic electronic control with pulse operation via foot pedal Functions: Clamping - Drilling - Releasing - Automatic electrical return of the drilling unit after reaching the set drilling depth - Automatic drilling depth extension for edge drilling; saves switching the drilling depth between face and edge drilling (+10 mm, e.g. with dowel length 35 mm, drilling depth edge 14 mm, drilling depth face 24 mm). - 1 drilling beam with 21 spindles, 32 mm spacing, 1.5 kW motor (drill feed 0-70 mm) - Includes 21x quick-change chucks (Ganner system) for easy tool change - Simple swiveling of the drilling unit from 0° to 90°, gas cylinder assisted - 1 clamping carrier, adjustable along Y-axis, with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm - Complete stop system consisting of: - 1 stop rail 1800 mm for shelf drilling (aluminium profile 40x40 mm) with 3 stop pins, quick-change system, easily shifted from right to left side for mirrored drilling of shelf holes in carcass construction, also suitable for series hole drilling in System 32 - Stop and position settings, as well as drilling height adjustment via support table with mechanical digital display; stops can be easily swung away for rapid conversion from cabinet to frame and vice versa - Support arms for clamping carrier for series hole positions up to max. 300 mm - Ideal three-stage tool system - 1 set of dowel drill bits: 5 carbide dowel drill bits, Ø 8x77 mm, right, 4 carbide dowel drill bits, Ø 8x77 mm, left Additional equipment: - Dust extraction funnel, dust-approved, Ø 120 mm - Full set for series drilling in System 32, consisting of: - 2 guide rails with scale and adapter for positions up to 300 mm max. - 2 pairs of stop blocks for series drilling, for Y-position 37 mm and e.g. 300 mm - 1 base rail 1000 mm (aluminium profile 40x40 mm) - 1 setting gauge for series drilling - 1 set of drill bits: 11 carbide drill bits, Ø 5x57 mm, right, 10 carbide drill bits, Ø 5x57 mm, left - Hydraulic brake cylinder Kodpjqw Ek Iofx Adkjww - Clamping cylinder with additional holder Location:

Stanje: rabljeno, Leto izdelave: 2023, New demonstration machine! List price: €86,567 net. Base machine complete in standard configuration for drilling and grooving: Detailed technical data available in the data sheet for ProTec type 0571. Processing unit equipped with: PowerBlock with 21 spindles and 1 grooving saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y4th drilling axis in Y. Workpiece sizes and weights: - Workpiece width (X): min. 60 mm / max. 1,000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in throughfeed mode, max. 5,600 mm programmable in the software - Workpiece weight: max. 75 kg Milling unit Profit HSK63F with 3-position magazine for automatic tool change, 5.5 kW (S1) motor, 1000-20,000 rpm with frequency converter, clockwise and counterclockwise, for HSK63F tool holder with 462E/OZ25 collet, cutter length up to 130 mm. Information: Ksdpfxjw Tfzfo Adkoww Processing unit MultiUnit with PowerBlock with 21/23 spindles, grooving saw, and optional Profit milling unit. Connected load: 12 kVA Rated current: 17.5 A Fuse: 32 A Voltage: 400 V, 50 Hz, 3-phase (without transformer) Power network: TN or TT Pneumatic connection: 7 bar (102 psi) On machine: Coupling plug (quick coupling) ¼", DN7.2, brass, factory side For the machine: Coupling socket (quick coupling) ¼", DN7.2, brass, customer side Supply pipe, hose inner diameter min. 12 mm Compressed air requirement, continuous air consumption: approx. 230 L/min (about 3.8 L/s) (compressed air) Extraction connection: 3x extraction nozzles, dia. 80 mm Extraction speed: 30 m/sec - measured at extraction nozzle Extraction requirement: min. approx. 2,500 m3/h Machine weight: approx. 1,650 kg (with options!) Machine footprint: In general, a ProTec can be fixed to the floor. Concrete flooring (or foundation) is required (at least under the 4 machine corners/feet). Equipment: - Protec 571 Profit HSK63F with 3-position magazine - Roller table 765 mm (Y-axis), foldable, for machine front, width 500 mm - Roller table 765 mm (Y-axis), foldable, for machine rear, width 500 mm - Auxiliary stop 600 mm with integrated rollers for roller tables - Additional safety device via lamella curtain - Requirement for horizontal milling for Lamello P-System (without tools for Lamello P-System) Drill bit set for Protec shank ø 10 mm with clamping surface (JSO): 1 HW pyramid point drill bit 5x70mm (NL 35mm), LH #30566-5-05035-L 3 HW dowel drill bit 5x70mm (NL 35mm), RH #30540-5-05035-R 4 HW dowel drill bit 5x70mm (NL 35mm), LH #30540-5-05035-L 3 HW dowel drill bit 8x70mm (NL 35mm), RH #30540-5-08035-R 5 HW dowel drill bit 8x70mm (NL 35mm), LH #30540-5-08035-L 2 HW dowel drill bit 10x70mm (NL 35mm), LH #30540-5-10035-L 1 HW cup drill bit 15x70mm (NL 35mm), LH #30300-5-15070-L 1 HW cup drill bit 20x70mm (NL 35mm), RH #30300-5-20070-R 1 HW cup drill bit 35x70mm (NL 35mm), RH #30300-5-35070-R 1 HW grooving cutter ø 125/30 mm, groove width (SB) 4.0 mm, Z=12, LH, Leitz - Only for chipboard and MDF, solid wood on request and subject to agreement Tool holder HSK63 F 3.00 pcs for collet 462E/OZ25 Collet 462E/OZ25 for shank 25 mm, 3.00 pcs Carbide insert shank cutter Z1+1, 1.00 pcs HW with insert drill tip ø20, S25, LH 120, L2/L3 58 mm Grooving cutter HW-insert Z1, 1.00 pcs with insert drill tip, D ø 10 mm, d ø 10 mm, L1 75 mm, L2 25 mm, L3 40 mm, RH (adapter 0571WAB10 to be ordered separately) Decorative grooving cutter HW-insert Z1, 1.00 pcs

Stanje: novo, Leto izdelave: 2026, Učinkovito nanašanje lepila v pohištveni industriji v izvrtine za ključe in utore na hrbtiščih, prav tako lepljenje pri okvirni, okenski in vratni proizvodnji v izvrtine za ključe, utorne in čepaste spoje. Kratek opis: • Univerzalna naprava za nanos lepila • Prihranek časa – enostavno – čisto • Različne šobe in nastavki • Mobilna naprava Kodpfehnddzox Adkjww Univerzalno področje uporabe: • Lepljenje izvrtin za ključe • Lepljenje utorov za hrbtišča • Lepljenje robnih površin • Lepljenje površin na splošno • Lepljenje utornih in čepastih spojev • Lepljenje delov pri omarah, korpusih, predalih • Lepljenje delov pri okvirjih • Lepljenje delov pri oknih in vratih • Predelava ploščatih in masivnih lesenih komponent

Stanje: novo, Leto izdelave: 2026, Stroj za vrtanje vogalnih ležajev in ročajev za natančno in učinkovito vrtanje okenskih elementov. Kratek opis: • Brez časov preurejanja med vrtanjem vogalnih ležajev in ročajev Kedpfsdx R Hzox Adksww • Prednosti vrtanja od spodaj • Komplet dodatne opreme za vrtanje vogalnih ležajev • Vrtalni vzorec po proizvajalcu (npr. G-U, Roto, Maco, Siegenia Aubi, Winkhaus ... in drugi proizvajalci) • Komplet dodatkov za vrtanje ročajev • Masivni precizni vrtalni prenosnik GANNOMAT

Stanje: novo, Leto izdelave: 2026, Concept Eco in Concept Primus sta idealna montažna pripomočka za čepljene spoje pri stiskanju korpusov ter pri izdelavi predalov. Kratek opis: Ksdpfxodx R Dme Adkjww • S prakso preverjenim izravnavanjem toleranc (sistem GANNOMAT) • 2 potenciometra za brezstopenjsko nastavitev stiskalne sile • Minimalna stiskalna sila 300/500 daN (kg) pri Concept Eco oz. Min. stiskalna sila 600/800 daN (kg) pri Concept Primus • Največja stiskalna sila 2200 daN (kg) pri Concept Eco oz. Maks. stiskalna sila 3500 daN (kg) pri Concept Primus • 3 hitrosti stiskanja in pomika 5/10/25 mm/sek. (z natančnim pozicioniranjem / počasni tek) • Prosto nastavljiv predizbor časa stiskanja z avtomatskim odpiranjem • Zelo enostavno upravljanje preko 6 ločenih tipk za 8 gibanjskih zaporedij

Stanje: novo, Leto izdelave: 2026, Sestava sistemov za ravnanje s korpusi za izdelavo ročne, polavtomatske ali popolnoma avtomatske montažne linije za korpuse je vedno izvedena glede na zahteve stranke. Montažne linije za korpuse, ki vam olajšajo delo, zmanjšajo čase nastavljanja ter povečajo proizvodno zmogljivost, vam z veseljem podrobno predstavimo ob osebnem pogovoru. Kwsdpedx R D Dsfx Adksw

Stanje: novo, Leto izdelave: 2026, CNC avtomatski stroj za vrtanje in vtikanje moznikov za popolnoma avtomatsko vrtanje, lepljenje in vtikanje moznikov. Vrtalno in moznizno obdelovalni center s kompaktnostjo, učinkovitostjo, kakovostjo in prilagodljivostjo. Kedpfxsdx R Dfj Adkjww Kratek opis: • Univerzalni CNC upravljani stroj za vrtanje in vtikanje moznikov • Nadzor izstreljevanja lepila preko GIC • Zaprt lepilni sistem • Primeren za obdelavo plošč in masivnega lesa • Opcijsko dodatne horizontalne in vertikalne vrtalne vretena • Razi razbremeni CNC obdelovalne centre • Optimalna dopolnitev za stroje za gnezdenje

Stanje: novo, Leto izdelave: 2026, Univerzalni masivni lesni vrtalni stroj s brezstopenjsko vrtalno enoto za univerzalno uporabo, na primer pri izdelavi stopnic, vhodnih vrat, oken, zimskih vrtov ter za izdelavo dolgih lukenj. Kratek opis: • Univerzalno področje uporabe: izdelava stopnic, okvirjev, vhodnih vrat, oken, zimskih vrtov ter za izdelavo dolgih lukenj, ... • Brezstopenjsko vrtalna enota z nagibom: 65°- 0 - 65° • Globina vrtanja do 200 mm (večje globine po izbiri) • Nastavitev višine za 2 nivoja, pnevmatska, 0-100 mm • Vrtanje na dveh nivojih s pnevmatskim dvigom in spustom vrtalnega motorja pri enkratni fiksaciji obdelovanca • Pnevmatske vpenjalke za obdelovance • Večvretenaste vrtalne glave (opcija) Kwsdpfxedx R E Ts Adkow • Pnevmatski pomik vrtanja (opcija) • Mobilno preko podvozja (opcija) ali z ročnim paletnim vozičkom

Stanje: novo, Leto izdelave: 2026, Vrtanje, lepljenje in vstavljanje moznikov v okenske profile za učinkovito in profesionalno izdelavo okenskih spojev z moznično tehniko. Kwedpfx Asdx R A Uedkjw Kratek opis: • Univerzalni CNC krmiljeni stroj za vrtanje in vstavljanje moznikov za okenske in vratne elemente • Nadzor brizganja lepila preko GIC • Zaprt sistem za lepilo • Izbirna dodatna horizontalna vrtalna vretena • Razbremeni CNC obdelovalne centre

Stanje: novo, Leto izdelave: 2026, Concept Eco in Concept Primus sta idealna montažna pripomočka za čepljene spoje pri stiskanju korpusov ter pri izdelavi predalov. Kratek opis: • S prakso preverjenim izravnavanjem toleranc (sistem GANNOMAT) • 2 potenciometra za brezstopenjsko nastavitev stiskalne sile • Minimalna stiskalna sila 300/500 daN (kg) pri Concept Eco oz. Min. stiskalna sila 600/800 daN (kg) pri Concept Primus • Največja stiskalna sila 2200 daN (kg) pri Concept Eco oz. Maks. stiskalna sila 3500 daN (kg) pri Concept Primus • 3 hitrosti stiskanja in pomika Kwsdpfx Adodx R Dtsksw 5/10/25 mm/sek. (z natančnim pozicioniranjem / počasni tek) • Prosto nastavljiv predizbor časa stiskanja z avtomatskim odpiranjem • Zelo enostavno upravljanje preko 6 ločenih tipk za 8 gibanjskih zaporedij

Stanje: novo, Leto izdelave: 2026, CNC-krmiljen stroj za vrtanje in montažo okovja z magazinom za samodejno obdelavo pokrovnih spon in montažnih plošč. Robustnost, dolga življenjska doba in enostavno upravljanje so značilnosti naših avtomatskih CNC-krmiljenih strojev za vrtanje in montažo. Kratek opis: • CNC-krmiljen avtomat za vrtanje in vtiskovanje pokrovnih spon za visoko kapaciteto • Fleksibilnost zaradi CNC-krmiljenja Kedodx A U Hspfx Adkjww • Masivni in robustni vrtalni agregati GANNOMAT • Vtiskovalna matrica iz jekla za dolgo življenjsko dobo • Vrtanje masivnega lesa s standardnim 1,5 kW motorjem • Varnostno krmiljenje z detektorjem kovin (opcijsko)

Stanje: novo, Leto izdelave: 2026, CNC obdelovalni center za fronte pohištvenih vrat in predalov. Prehodni stroj za vrtanje, vrtanje in vtiskovanje okovij, utore in rezkanje. Ksdjdx A U Iopfx Adkeww Kratek opis: • CNC vodeni obdelovalni center za fronte • Popolna obdelava pohištvenih vrat in čel predalov • Sistem za nadzor dolžine in širine obdelovanca

Stanje: novo, Leto izdelave: 2026, Avtomati za vrtanje in vstavljanje Gannomat so neodvisni od proizvajalcev okovja ter zasnovani za natančno vrtanje in vstavljanje okovja. Naši univerzalni stroji za vrtanje lončastih tečajev izstopajo po robustnosti, dolgi življenjski dobi in enostavni uporabi. Kratek opis: • Neodvisnost od dobaviteljev in proizvajalcev okovja • Precizni vrtalni menjalniki s jeklenimi zobniki in jekleno sklopko • Univerzalno področje uporabe: lončaste tečaje, vrstne izvrtine, spojke, ročaje in skozi luknje, izvrtine za vodila predalov, ... Kedpfsdx Axusx Adkjww • Masivni in stabilni vrtljivi prisloni • Razdalja čelnega prislona do vrtalnih vreten do 300 mm (Basica Variabel)

Stanje: novo, Leto izdelave: 2026, Avtomatski vrtalni in montažni stroj z magazinom za avtomatsko obdelavo skodeličnih spon in montažnih ploščic. Naši avtomatski vrtalni in montažni stroji odlikujejo robustnost, dolga življenjska doba in enostavno upravljanje. Kratek opis: • Avtomat za vrtanje in vtiskovanje skodeličnih spon za visoko kapaciteto • Masivne in robustne vrtalne enote • Jeklena vtiskovalna matrica za dolgo življenjsko dobo • Vrtanje masivnega lesa s standardnim 1,5 kW motorjem Kedpfedx A U Dsx Adksww • Varnostno krmiljenje z detektorjem kovin (opcijsko)

Stanje: novo, Leto izdelave: 2026, Samodejni stroj za vrtanje in vstavljanje okovja z zalogovnikom za avtomatsko obdelavo spojniki in montažnih plošč. Naši avtomatski stroji za vrtanje in montažo odlikuje robustnost, dolga življenjska doba in enostavna uporaba. Kratek opis: • Stroj za vrtanje in vtiskovanje spojniki za visoko kapaciteto • Masivni in robustni vrtalni agregati • Tiskalna matrica iz jekla za dolgo življenjsko dobo Kodpfxjdx A Ure Adksww • Vrtanje masivnega lesa s standardnim 1,5 kW motorjem • Varnostni nadzor z detektorjem kovin (opcijsko)

Stanje: novo, Leto izdelave: 2025, Concept Easy je idealen pripomoček za montažo mozniških spojev pri stiskanju korpusa, kot tudi pri izdelavi predalov. Kratka predstavitev: • Majhna potrebna površina, manj kot 1,8 m2 • Potenciometer za brezstopenjsko nastavitev pritisne sile • Tlačna sila min. 300 daN (kg) • Tlačna sila max. 2200 daN (kg) • 3 pritisne in nastavitvene hitrosti 5 / 10 / 25 mm/s (z natančnim pozicioniranjem / počasnim načinom) • Prosto nastavljiv prednastavljeni čas pritiska z avtomatskim odpiranjem Ksdpfxsdx Daaj Adkjww