Gannomat Cnc nakup rabljenega (61)

Stanje: rabljeno, rabljeno, dobro ohranjeno, malo uporabljeno, dodatna oprema s pnevmatskim dvigom za vrtanje na dveh nivojih Znamka Ganner Tip Junior Motor 1,5 kW Upravljanje z 2 ročicama Velikost mize 850 x 360 mm Vpenjalo 20 mm Godpfx Aaeythcrj Ueuc Naprava za mozničenje z 24 rasterji Postajališče za obdelovanec Sredinsko naslonilo Pnevmatski dvig Pnevmatski prijemali 2 kosa Potreben prostor cca 300 x 1000 x 1300 mm Teža cca 270 kg Skladišče 97447 Gerolzhofen, prosto naloženo, nepakirano Predaja v trenutnem stanju kot vidno, funkcionalnost preverjena brez obnove, brez garancije ali jamstva

Stanje: rabljeno, Leto izdelave: 1999, številka stroja/vozila: 1088.968, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 55 h, skupna širina: 700 mm, skupna dolžina: 900 mm, skupna višina: 650 mm, skupna masa: 70 kg, število vreten: 5, Ponujamo ta rabljeni stroj za vrtanje okovja Gannomat Modell204, letnik 1999. Proizvajalec: Gannomat Model: Modell204 Letnik: 1999 Stanje: rabljeno ID kategorije: 659 ID tipa: 2533 Guedpfsyak Hyjx Aa Usc Tip stroja: stroj za vrtanje okovja Za vprašanja ali dodatne informacije nam pošljite sporočilo ali nas pokličite.

Stanje: rabljeno, used Manufacturer: Ganner Model: Superdrill Number of spindles: 19 pcs Spindle pitch/grid: 32 mm Hydraulic feed brake Stop rulers: 2 pcs, length approx. 3.0 m / 1.5 m Guedpfxsvwf R Rs Aa Uec Working width: 640 mm Drilling depth: 95 mm / 110 mm Drill chuck diameter: 10 mm Swing stops: 6 pcs Clamps: 3 pcs Row hole drilling device Frame dowel drilling device Space requirement: approx. 1400 mm x 900 mm x 1200 mm Total connected load: 1.5 kW Location: 97447 Gerolzhofen, free loaded, unpacked Transfer in current condition as inspected, without overhaul without warranty or guarantee

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1990, Engines: 2 x 1.85 A, 50 Hz, 380 V, 2800 rpm Operating air pressure: 6 bar 30 spindles, holder Ø 10 mm Combined foot switch Emergency stop switch Gjdpfxsv Nptme Aa Uouc Main switch Manual height adjustment Manual lateral adjustment

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, Connection: 220V, compressed air connection: 6 bar, weight approx. 110 kg, mobile, dowel feed via vibratory bowl feeder, automatic dowel length and diameter control, fully automatic electronic control system, functions: blowing, gluing, gluing & driving in, selector switch for glue/water for rinsing, glue residual quantity indicator, stainless steel glue tank, stainless steel water tank, 1x gun for dowel diameter 8 mm, length 20-50 mm, operating manual. Godpfx Aaewrruqs Uouc

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, two speeds: 1400 rpm at 1.1 kW, 2800 rpm at 1.5 kW air connection 6 bar fully automatic pneumatic control with foot pedal additional switch for "chip removal" program T-drilling head with 7+2 drilling spindles, 32 mm pitch drill shank diameter 10 mm Gusdpfx Ajv Npw Esa Ujc swivable 90°, with locking mechanism undercarriage

Stanje: dober (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, Power supply: 380V, 3.3A Motor power: 1.1 kW, 2800 rpm automatic pneumatic control with control panel Drilling head with 23 spindles, 32 mm pitch Adjustable drilling depth Drill shank: 10 mm Position adjustment: 5–60 mm Clamping height: 80 mm Pass-through width: 800 mm Gedpfxeq Auwte Aa Uouc Dimensions: 1200 x 900 mm Weight: approx. 400 kg Includes: 1x row drilling setting gauge 1x side stop setting gauge 1x stop ruler 1500 mm 1x stop ruler 2000 mm

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Drilling and insertion machine for all types of furniture fittings; row drilling and group drilling machine in the 32 mm system. Power supply: 400V, 0.75kW Spindle speed: 2800 rpm Stop rule: 960 mm 2x swiveling stops For drills with 10 mm shank diameter Maximum workpiece thickness: 40 mm Includes: 1x 7-spindle drilling head for row drilling with 32 mm pitch, equipped with integrated positioning pins Manual feed Base frame included Available at extra cost: Olive (handle) drilling head: €450.00 Mepla drilling head with press-in die: €550.00 Gsdpfsumw Sbsx Aa Usuc Hettich drilling head with press-in die: €550.00

Stanje: rabljeno, Leto izdelave: 2018, 1 piece CNC-CONTROLLED BORING, GLUING, AND DOWEL INSERTION MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro), 400V, 3Ph, 50Hz, complete in standard configuration with: - Carriage with linear guide, consisting of: - 1 pc. single-spindle horizontal boring unit, motor 1.1 kW, selectable spindle speed via operator software (3000/5000/8000 rpm) - 1 pc. exhaust, gluing, and dowel insertion station in reinforced design for dowels Ø 8 mm, dowel length 30 mm - Fully automatic, electronically controlled central lubrication system - X-axis NC controlled, with working length of 1300 mm, maximum traverse speed 78 m/min - Z-axis, position via table support programmable from 5–40 mm, option for NC-controlled Z-axis - Programmable dowel projection depth from 7–20 mm, option for NC-controlled Y-axis - Drilling depth from 0–35 mm (with drill bit length 70 mm) is set automatically with dowel projection - Closed gluing system with 6 bar glue pressure via glue nozzle, suitable for adhesives with viscosity of 150 to 350 mPas - Infinitely variable glue quantity control via operator software - Selector switch GLUE/WATER for flushing the glue system; each with 1 stainless steel tank for 5 kg glue and 5 l water - Indicator light for glue residual level in glue container - 1 pc. left, 1 pc. right, and 1 pc. central side stop (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm - 1 pc. TCT control with: - Integrated industrial PC, inkl. Soft PLC Beckhoff TWINCAT, operating temperature range 0–50°C, TFT industry display 15" resistive touch, 1024 x 768 resolution, CPU 2 GHz, 256 MB RAM, 2x network adapters, IDE hard drive, 4x USB rear, 1x USB front, operating system: WINDOWS 7 Gusdpfx Aasxwaz He Ujc - Programming via menu-guided user software, freely programmable drilling distances with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 4 work areas assignable with different programs, graphical workpiece representation, parametric programming, zero-point shift, programmable work lists, error diagnosis in plain text OPTIONS: - 1 electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle - 4 additional vertical angled clamping cylinders 10° with holders (total 8 clamping cylinders) - Surcharge for machine bed length 1800 mm with working length 1800 mm - Surcharge for: 1 horizontal drilling unit, 1.5 kW motor, with multi-spindle boring head with 3 individually selectable drilling spindles, 32 mm pitch along X-axis, spindle speed 3000 rpm (standard working length not reduced) - 1 NC-controlled Y-axis, with ball screw and dynamic traverse speed 300 mm/sec. Programmable via software: dowel projection 7–30 mm and drilling depth 0–42 mm (with drill bit length 77 mm) for vertical drilling unit from ABOVE; Y-axis position 5–42 mm - Surcharge for NC-controlled Y-axis, position 5–62 mm instead of 5–42 mm - Surcharge for: 1 vertical drilling unit from ABOVE, 1.5 kW motor, with multi-spindle boring head with 3 individually selectable drilling spindles, 32 mm pitch along X-axis, spindle speed 3000 rpm, Y-axis position 5–42 mm, workpiece length (Y) min. 130 mm (standard working length not reduced) - 1 NC-controlled Z-axis, with K...

Stanje: rabljeno, Leto izdelave: 2014, Used machine Year of manufacture: 2014 Features and technical data: Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal drilling unit, 0.65 kW motor, 70 mm stroke Tool speed selectable via operator software (3000/5000/8000 rpm) 1 pc. blow-off, gluing, and dowel insertion station for dowels Ø 8 mm, dowel length 25-50 mm - Fully automatic, electronically controlled central lubrication - X-axis CNC controlled, with working length 1300 mm, max. traverse speed 105 m/min - Z-axis manually adjustable via mechanical digital counter, position on support table 5-40 mm - Dowel insertion projection adjustable from 7-20 mm via mechanical digital counter; drilling depth from 0-35 mm (with drill bit length GL 70 mm) is automatically set with insertion projection - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with viscosity 150 to 350 mPas - Glue quantity infinitely adjustable via operator software - Selector switch GLUE/WATER for rinsing the glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Control lamp for glue level indicator in the glue container - 1 pc. left side stop, 1 pc. right side stop, and 1 pc. center stop (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic inclined clamping cylinders 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction hood, connection Ø 80 mm 1 pc. TCT control unit with: Integrated industrial PC, incl. Beckhoff TWINCAT Soft PLC, operating temperature range 0-50°C, 15" capacitive TFT industrial touchscreen display, operating system: WINDOWS 7 - Programming via menu-guided user software, freely programmable drilling distances with absolute, relative, or grid dimensions, automatic workpiece mirroring and process optimization, 4 work fields assignable with different programs, graphic workpiece display, parametric programming, zero-point shifting, programmable job lists, error diagnosis in plain text Options: 1 Electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle 1 Z-axis with CNC-controlled, dynamic positioning for height adjustment of drilling and dowel insertion station (programmable from 5-40 mm) Traverse speed max. 30 mm/sec. 1 single-spindle vertical drilling unit from above, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjustable via mechanical digital counter from 5-40 mm, max. drilling depth (Z) 30 mm (with drill bit length GL 57 mm) Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g. for Häfele Minifix) Gsdpfxsy Ih Ske Aa Usuc 4 vertical inclined clamping cylinders 10° with mount, additionally 1 keyboard with mount Availability: by arrangement; currently being overhauled at the Ganner factory Location: Austria

Stanje: rabljeno, Leto izdelave: 2024, Dowel Hole Boring Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW complete in standard configuration including: - Fully automatic electronic control with pulse operation via foot pedal for clamping-drilling-unclamping, with electric skip function. Gedpfxjxnlfle Aa Uouc - Automatic return of the drilling unit after reaching the set drilling depth. - Automatic extension of borehole depth when drilling on the end-face. This eliminates the need to reset borehole depth when switching from wide-face to end-face drilling (+10 mm, for example, with dowel length 35 mm, drilling depth wide-face 14 mm, and drilling depth end-face 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm), including 21 quick-change chucks (Ganner system) for easy drill bit changes. - Simple pivoting of the drilling unit from 0° to 90°, assisted by gas cylinder. - 1 clamping rail adjustable on the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. Ideal positioning system consisting of: - 1 stop ruler 1800 mm for drilling shelves and intermediate panels, (aluminium profile 40x40 mm) with 3 drop-in stops. - With quick-change system, easily swapped from right to left stop side for mirror-image drilling of shelves and intermediate panels in carcass constructions. Also suitable for line boring in 32 mm system. - Side stops and position adjustments, as well as drilling height adjustment via mechanical digital counters on the support table. - Side stops can be easily pivoted away for quick changeover from carcass to frame and line drilling operations. - Clamping arms for clamping rail designed for line boring positions up to max. 300 mm. - Ideal three-stage tooling system. - 1 set of dowel drills: 5 HM dowel drill bits, Ø 8x77 mm, right-hand - 4 HM dowel drill bits, Ø 8x77 mm, left-hand Basic machine Dowel Hole Boring Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW complete in standard configuration including: - Fully automatic electronic control with pulse operation via foot pedal for clamping-drilling-unclamping, and electric skip function. - Automatic return of the drilling unit after reaching the set drilling depth. - Automatic extension of the borehole depth for end-face drilling, eliminating the need to adjust the drilling depth from wide-face to end-face (+10 mm, e.g. with dowel length 35 mm, wide-face drilling depth 14 mm, end-face drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm), including 21 quick-change chucks (Ganner system) for easy drill bit changes. - Simple pivoting of the drilling unit from 0° to 90°, assisted by gas cylinder. - 1 clamping rail adjustable on the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal positioning system consisting of: - 1 stop ruler 1800 mm for drilling shelves/intermediate panels (aluminium profile 40x40 mm) with 3 drop-in stops, - quick-change system, easily switched from right to left stop side for mirror-image shelf drilling in carcass construction; also suitable for line boring in System 32. - Side stops and position adjustments, as well as drilling height adjustment via mechanical digital counters on the support table. - Side stops can be easily pivoted away for ultra-fast changeover from carcass to frame and line boring. - Clamping arms for clamping rail suited for line boring positions up to max. 300 mm. - Ideal three-stage tooling system. Extraction funnel, dust-teste