Ganner nakup rabljenega (51)

Stanje: rabljeno, Leto izdelave: 2014, complete in standard version with: - Fully automatic electronic control with foot pedal for clamping-drilling-unclamping, electrical intermittent operation, - Automatic return of the drilling unit after reaching the set drilling depth - Automatic extension of the borehole depth for end-face drilling saves the need to adjust the drilling depth from flat to end-face borings. (+10 mm, e.g., with dowel length 35 mm, drilling depth flat side 14 mm and drilling depth end side 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drill feed 0-70 mm) incl. 21 quick-change chucks (Ganner system) for easy drill bit changes. - Simple swiveling of the drilling unit from 0° to 90°, assisted by gas cylinder. - 1 clamp carrier, movable on the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm - Ideal stop system consisting of: - 1 stop ruler 1800 mm for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, with quick-change system, easily switchable from right to left stop side for mirrored drilling of shelves in carcass construction; also usable for line drilling in System 32. - Side stops and position settings, as well as the drilling height position via support table with mechanical digital counters. - Side stops can be easily swung away for quickest changeover from carcass to frame and row-hole drilling. - Clamping arms for clamp carrier suitable for row-hole positions up to max. 300 mm. - Ideal three-stage... Approx. weight: 400 kg gross, approx. 350 kg net Dimensions: (L x W x H) 1.35 m x 1.25 m x 1.40 m Equipment: 1 extraction funnel, dust-tested, ø 120 mm 1 set for row drilling in System 32 complete with: 1 base ruler 1050 mm (aluminum profile 40x40 mm) 1 template for row drilling 1 frame dowel device complete with: 1 central stop, 1 round stop rod 850 mm long, 2 stops. Location: Nattheim Fjdjyrqubepfx Abvopd

Stanje: rabljeno, Leto izdelave: 1986, Rabljeni stroj Leto izdelave: 1986 Fpedpjyncppsfx Abvod Oprema in tehnični podatki: - z vrtalno glavo za vrste lukenj s 7 vreteni in zatiči za pozicioniranje - razdalja 32 mm - z vrtalno glavo za BLUM tečaje - z vrtalno glavo za Hettich tečaje - z ustreznimi vtisnimi matricami - motor 400 V, 0,75 kW, 2800 obr/min - z naslonskimi palicami Razpoložljivost: takoj Lokacija skladišča: 63934 Röllbach

Stanje: rabljeno, rabljeno, dobro ohranjeno, malo uporabljeno, dodatna oprema s pnevmatskim dvigom za vrtanje na dveh nivojih Znamka Ganner Tip Junior Motor 1,5 kW Upravljanje z 2 ročicama Velikost mize 850 x 360 mm Vpenjalo 20 mm Naprava za mozničenje z 24 rasterji Postajališče za obdelovanec Sredinsko naslonilo Fpsdpfxeythcro Abvsd Pnevmatski dvig Pnevmatski prijemali 2 kosa Potreben prostor cca 300 x 1000 x 1300 mm Teža cca 270 kg Skladišče 97447 Gerolzhofen, prosto naloženo, nepakirano Predaja v trenutnem stanju kot vidno, funkcionalnost preverjena brez obnove, brez garancije ali jamstva

Stanje: rabljeno, Leto izdelave: 2018, 1 piece CNC-CONTROLLED BORING, GLUING, AND DOWEL INSERTION MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro), 400V, 3Ph, 50Hz, complete in standard configuration with: - Carriage with linear guide, consisting of: - 1 pc. single-spindle horizontal boring unit, motor 1.1 kW, selectable spindle speed via operator software (3000/5000/8000 rpm) - 1 pc. exhaust, gluing, and dowel insertion station in reinforced design for dowels Ø 8 mm, dowel length 30 mm - Fully automatic, electronically controlled central lubrication system - X-axis NC controlled, with working length of 1300 mm, maximum traverse speed 78 m/min - Z-axis, position via table support programmable from 5–40 mm, option for NC-controlled Z-axis - Programmable dowel projection depth from 7–20 mm, option for NC-controlled Y-axis - Drilling depth from 0–35 mm (with drill bit length 70 mm) is set automatically with dowel projection - Closed gluing system with 6 bar glue pressure via glue nozzle, suitable for adhesives with viscosity of 150 to 350 mPas - Infinitely variable glue quantity control via operator software - Selector switch GLUE/WATER for flushing the glue system; each with 1 stainless steel tank for 5 kg glue and 5 l water - Indicator light for glue residual level in glue container - 1 pc. left, 1 pc. right, and 1 pc. central side stop (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm - 1 pc. TCT control with: - Integrated industrial PC, inkl. Soft PLC Beckhoff TWINCAT, operating temperature range 0–50°C, TFT industry display 15" resistive touch, 1024 x 768 resolution, CPU 2 GHz, 256 MB RAM, 2x network adapters, IDE hard drive, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - Programming via menu-guided user software, freely programmable drilling distances with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 4 work areas assignable with different programs, graphical workpiece representation, parametric programming, zero-point shift, programmable work lists, error diagnosis in plain text OPTIONS: - 1 electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle Fpsdpfoxwaz Hsx Abved - 4 additional vertical angled clamping cylinders 10° with holders (total 8 clamping cylinders) - Surcharge for machine bed length 1800 mm with working length 1800 mm - Surcharge for: 1 horizontal drilling unit, 1.5 kW motor, with multi-spindle boring head with 3 individually selectable drilling spindles, 32 mm pitch along X-axis, spindle speed 3000 rpm (standard working length not reduced) - 1 NC-controlled Y-axis, with ball screw and dynamic traverse speed 300 mm/sec. Programmable via software: dowel projection 7–30 mm and drilling depth 0–42 mm (with drill bit length 77 mm) for vertical drilling unit from ABOVE; Y-axis position 5–42 mm - Surcharge for NC-controlled Y-axis, position 5–62 mm instead of 5–42 mm - Surcharge for: 1 vertical drilling unit from ABOVE, 1.5 kW motor, with multi-spindle boring head with 3 individually selectable drilling spindles, 32 mm pitch along X-axis, spindle speed 3000 rpm, Y-axis position 5–42 mm, workpiece length (Y) min. 130 mm (standard working length not reduced) - 1 NC-controlled Z-axis, with K...

Stanje: rabljeno, Leto izdelave: 2024, Dowel Hole Boring Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW complete in standard configuration including: - Fully automatic electronic control with pulse operation via foot pedal for clamping-drilling-unclamping, with electric skip function. - Automatic return of the drilling unit after reaching the set drilling depth. - Automatic extension of borehole depth when drilling on the end-face. This eliminates the need to reset borehole depth when switching from wide-face to end-face drilling (+10 mm, for example, with dowel length 35 mm, drilling depth wide-face 14 mm, and drilling depth end-face 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm), including 21 quick-change chucks (Ganner system) for easy drill bit changes. - Simple pivoting of the drilling unit from 0° to 90°, assisted by gas cylinder. - 1 clamping rail adjustable on the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. Ideal positioning system consisting of: - 1 stop ruler 1800 mm for drilling shelves and intermediate panels, (aluminium profile 40x40 mm) with 3 drop-in stops. - With quick-change system, easily swapped from right to left stop side for mirror-image drilling of shelves and intermediate panels in carcass constructions. Also suitable for line boring in 32 mm system. - Side stops and position adjustments, as well as drilling height adjustment via mechanical digital counters on the support table. - Side stops can be easily pivoted away for quick changeover from carcass to frame and line drilling operations. - Clamping arms for clamping rail designed for line boring positions up to max. 300 mm. - Ideal three-stage tooling system. - 1 set of dowel drills: 5 HM dowel drill bits, Ø 8x77 mm, right-hand - 4 HM dowel drill bits, Ø 8x77 mm, left-hand Basic machine Dowel Hole Boring Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW complete in standard configuration including: - Fully automatic electronic control with pulse operation via foot pedal for clamping-drilling-unclamping, and electric skip function. - Automatic return of the drilling unit after reaching the set drilling depth. - Automatic extension of the borehole depth for end-face drilling, eliminating the need to adjust the drilling depth from wide-face to end-face (+10 mm, e.g. with dowel length 35 mm, wide-face drilling depth 14 mm, end-face drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm), including 21 quick-change chucks (Ganner system) for easy drill bit changes. - Simple pivoting of the drilling unit from 0° to 90°, assisted by gas cylinder. - 1 clamping rail adjustable on the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal positioning system consisting of: - 1 stop ruler 1800 mm for drilling shelves/intermediate panels (aluminium profile 40x40 mm) with 3 drop-in stops, - quick-change system, easily switched from right to left stop side for mirror-image shelf drilling in carcass construction; also suitable for line boring in System 32. Fodpfsxnlfljx Abvspd - Side stops and position adjustments, as well as drilling height adjustment via mechanical digital counters on the support table. - Side stops can be easily pivoted away for ultra-fast changeover from carcass to frame and line boring. - Clamping arms for clamping rail suited for line boring positions up to max. 300 mm. - Ideal three-stage tooling system. Extraction funnel, dust-teste

Stanje: rabljeno, Leto izdelave: 1995, Rabljeni stroj Fpedpfx Abew Rhlhjvjd Leto izdelave: 1995 Oprema in tehnični podatki: - Naprava za vbijanje moznika za hkratno lepljenje in vbijanje moznika - Dovajanje moznika prek brezvzdrževalnih vibracijskih podajalnikov - Popolnoma avtomatsko brezvzdrževalno elektronsko krmiljenje s preklopnikom IZPIRANJE/LEPLJENJE/LEPLJENJE-VBIJANJE - Popolnoma zaprt lepilni sistem - 1 nerjavni rezervoar 5 l za lepilo in 1 nerjavni rezervoar 5 l za vodo - Lahka, priročna in brez povratnega udarca pištola za moznike 8 mm - Kapaciteta: 45 moznikov na minuto - Električni priključek: 220 V, 1 faza, 50 Hz - Priključek za stisnjen zrak: 6 bar - Dimenzije: 650 x 650 x 1100 mm - Teža: 110 kg Razpoložljivost: kratkoročno Lokacija: Röllbach

Leto izdelave: 2025, stanje: novo, New machine Year of manufacture: 2025 Fpjdew Nafkopfx Abvod Features and technical data: Complete in standard specification with: Sturdy, torsion-resistant steel frame in welded and bolted construction Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements Lamella pressure beams with proven tolerance compensation (Ganner system) for tightly pressed carcass joints Counter-pressure surfaces (side pressure wall, base) are continuous 38 mm thick, coated support panels Continuous pressing surface with a height of 95 mm on the lower vertical pressure beam Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance travelling nuts with grease reservoir Pressing is performed electromechanically via two separate worm gear motors (2 x 0.75 kW) The pressing force of the pressure beams is infinitely variable, set electronically via two potentiometers and controlled by frequency converters; therefore, the pressing force regulation is absolutely wear-free Pressing force for the horizontal pressure beam: min. 500 daN (kg), steplessly adjustable up to max. 2200 daN (kg) Pressing force for the vertical pressure beam: min. 300 daN (kg), steplessly adjustable up to max. 2200 daN (kg) Pressing and adjustment speed of the pressure beams with fine positioning via 3-position selector switch: 5 / 10 / 25 mm/sec Jog mode for precise positioning of both pressure beams, e.g. for low pressing force, drawers, and 45° carcasses Simple operation via 6 separate push buttons; 8 movement sequences selectable via control panel Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours) with individually programmable opening dimensions of both pressure beams Re-press function to increase or decrease the pressing force during the pressing cycle Working height/loading height: 300 mm Working dimensions: Length min. 150 mm, max. 2500 mm; Height min. 150 mm, max. 1400 mm; Depth: 700 mm Incl. surcharge for rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speed 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec; sensors can be switched off for pressing of special components Incl. set of machine feet for working height 500 mm Location: Flörsheim Availability: Immediate

Stanje: dober (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, Naprava za vstavljanje moznikov Ganner Selekta 252 Letnik izdelave: 2009 Fpedpeycf Iksfx Abvjd

Stanje: rabljeno, used Manufacturer: Ganner Model: Superdrill Number of spindles: 19 pcs Spindle pitch/grid: 32 mm Hydraulic feed brake Stop rulers: 2 pcs, length approx. 3.0 m / 1.5 m Working width: 640 mm Drilling depth: 95 mm / 110 mm Drill chuck diameter: 10 mm Swing stops: 6 pcs Clamps: 3 pcs Row hole drilling device Fpodpfx Abevwf R Rjvod Frame dowel drilling device Space requirement: approx. 1400 mm x 900 mm x 1200 mm Total connected load: 1.5 kW Location: 97447 Gerolzhofen, free loaded, unpacked Transfer in current condition as inspected, without overhaul without warranty or guarantee

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Gannomat Selekta Dowel Insertion Machine Year of manufacture: 2025 Dowel inserting machine with applicator gun for simultaneous gluing and dowel insertion. Designed for professional and efficient dowel processing in furniture and frame construction. • Consistent dowel insertion projection • Always constant and correct adhesive quantity • No subsequent cleaning of workpieces necessary due to accurate glue dosage Fpjdpevxgm Nofx Abvsd • Simplest glue system cleaning via EasyClean—an automatic cleaning program • Automatic ejection of dowels with incorrect diameter and length by Auto-DL-Select • Dowels are not inserted to the borehole bottom; the dowel insertion projection is set independently of the borehole depth • Kickback-free, ultra-light, and ergonomic glue-dowel insertion gun • Significant time savings compared to glue bottle and hammer methods

Stanje: rabljeno, Leto izdelave: 2000, Število vreten po vrsti lukenj: 11 Število vodoravnih vreten: 3 Glava za lončane tečaje: da, Blum Razmak med svedri: 32 mm Fpsdpfjxc Hi Usx Abvsd Poraba energije: 2,2 kW Vrtalni agregat: vrtljiv

Stanje: rabljeno, Leto izdelave: 1985, Rabljeni stroj Leto izdelave: 1985 Oprema in tehnični podatki: - Za konstrukcijske izvrtine horizontalno in vertikalno - Za vrtanje vrst lukenj vertikalno z razmakom 32 mm - Vertikalni vrtalni agregat z dvo-vretenskimi glavami, prosto pozicioniranimi na indeksni osi - Motor 1,5 kW s 1400 vrt/min - Motor 1,5 kW s 2800 vrt/min - Vrtalne glave s pnevmatskim pomikom - Pnevmatski vpenjalci materiala - Prehodna širina pribl. 850 mm - Vključno z različnimi omejevalniki in svedri Razpoložljivost: takoj Fpsdpfxjwka Hfe Abvjd Lokacija: Röllbach

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Technical data: Laminated carcass press from our showroom; Working range: Width from 150 - 2,550 mm, Height from 150 - 1,400 mm; Depth from 150 - 700 mm; Variable pressing force adjustment 300/700/1100/1400/1800/2200 daN (kg) for the side pressing beam; Variable pressing force adjustment 500/800/1200/1500/1900/2200 daN (kg) for the upper pressing beam. Easy operation via 6 separate pressure buttons, freely adjustable pressing time preselection with automatic opening function, loading height 300 mm. The machine is available for immediate delivery from our showroom. Location: ex stock 54634 Bitburg Fpedpfx Abob Eln Djvsd

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND MORTISE BORING MACHINE Completely in standard configuration as per price list 01/22/D with: - Precision collet chuck for ER 40 collets, diameter 3–26 mm. Including collets Ø 10 / 13 / 16 / 20 mm - Motor 1.5 kW, 2800 rpm Fpsdpfjxdttisx Abvjd - Position adjustment via digital counter - Position adjustment for 2 levels, pneumatic (0–100 mm) - Maximum drilling depth 150 mm - Precision indexing rail with 12 mm increments, featuring: - Central detent and transverse adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete stop system, consisting of: 1 central stop and 1 stop for extra-wide frames 1 stop bar, approx. 850 mm long (can be repositioned from left to right) 2 flip stops - Lowerable mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5 kW) Extraction funnel, diameter 80 mm, dust-tested Central mitre stop 45° Pair of auxiliary workpiece supports, swiveling (left and right) Drilling head mount 3-spindle drilling head, 32 mm pitch (can be rotated 90°) Undercarriage with 4 wheels for easy movement of the machine Availability: Short term – immediately –

Stanje: rabljeno, Leto izdelave: 1989, Rabljeni stroj Leto izdelave: 1989 Oprema in tehnični podatki: - 2-čeljustna vrtalna glava za steblo do 20 mm premera - Pnevmatska nastavitev položaja na 2 nivojih 0-100 mm - Največja globina vrtanja 150 mm - Precizna rastrovna letvica 12 mm - Centrirna aretacija in prečna nastavitev - 2 pnevmatska varnostna vpenjalna cilindra - Motor 1,5 kW - Število obratov 2800 obr/min Dimenzije (brez prislona): 1100 x 1100 x 1500 mm Teža: pribl. 310 kg Fjdpewkba Hefx Abvepd Dobavljivost: takoj Lokacija skladišča: Röllbach

Stanje: rabljeno, Leto izdelave: 1993, Rabljeni stroj Leto izdelave: 1993 Fodew I Uy Tjpfx Abvjpd Oprema in tehnični podatki: Vpenjalna glava z 2 čeljustmi do Ø 20 mm stebla Pnevmatska nastavitev pozicije na 2 nivojih 0-100 mm Maks. globina vrtanja: 150 mm Precizna zobata letev 12 mm Sredinska zapora in prečno nastavljanje. 2 pnevmatska varnostna vpenjalna valja Motor 1,5 kW Št. vrtljajev: 2800 o/min Nastavljiva enota za podolgovate izvrtine z 2 programskima ekscentroma Teža stroja ca. 310 kg Velikost stroja (ŠxGxV) 1100 x 1100 x 1500 mm (brez prislona) Razpoložljivost: hitro dobavljivo Lokacija: Röllbach

Stanje: rabljeno, Leto izdelave: 1989, Delovne dimenzije 3000 x 1250 x 650 mm Hod cilindra 110 mm Fsdpsxu Egvjfx Abvepd Dimenzije stroja 3240 x 2120 x 770 mm Teža cca 900 kg

Stanje: rabljeno, Rabljeni stroj Rabljeni vrstni vrtalni stroj znamke Ganner, tip RB 107 Tovarniška št.: 121627 Moč motorja: 1,5 kW Hitrost motorja: 2800 vrt/min 1 vrtalna greda s 26 vreteni, razdalja med osmi 32 mm Fodpfjw I Unwsx Abvjpd 3 pritiskači 1 nožno stikalo Razpoložljivost: kratkoročno Lokacija: Röllbach

Stanje: rabljeno, Leto izdelave: 1997, Rabljeni stroj Fpsdpfx Asxwz Ihsbvod Leto izdelave: 1997 Stanje: vzdrževan Oprema in tehnični podatki: - Število vrtalnih vreten: 21 kosov z razmakom 32 mm - Smer vrtanja: od spodaj in čelno - Zasuk: 0–90 stopinj s pomočjo ročnega kolesa - Pnevmatski pritiskači materiala: 3 kosi - Prehod: maks. 100 mm višine in maks. 640 mm širine - Motor: 1,5 kW - Premer odsesovalnega priključka: 120 mm - Vključno z večjim številom omejevalnikov (glejte slike) Razpoložljivost: predvidoma sredi aprila 2026 Skladišče: Hessen

Leto izdelave: 2025, stanje: novo, New machine Year of manufacture: 2025 Features and technical specifications: Standard configuration: - Robust machine base body - Dowel system for: dowel diameter 8 mm dowel length 35 mm (factory setting, adjustable from 30 to 40 mm) dowel projection 12 mm (factory setting, adjustable from 7 to 20 mm) recoil-free insertion gun vibratory feeder for dowel transport dowel diameter and length control with Auto-DL-Select system - Water supply system for pre-glued dowels water tank (stainless steel, 7.5 liters) closed water system with 6 bar water pressure and spray nozzle - Electronic control system with: main power switch ON / OFF program selector switch water / water + insertion potentiometer for dowel feed rate via vibratory feeder potentiometer for water injection quantity indicator light for minimum water level in tank - Chassis/mobile base - Pneumatics: 6 bar / Electrical: 230V, 1Ph, 50Hz HoKuTech DübelJet with option for counter-bore processing: 1 unit HoKuTech | DübelJet with LeimJet expansion kit incl. devices for hanging/connecting to the DübelJet incl. height-adjustable suspension for glue hose/ Included: 1 HoKuTech | LeimJet glue dispensing unit for counter-bore application for use with PVAc glues up to 75,000 mPas viscosity incl. dowel nozzle for Ø 8 mm, pointed nozzle Location: Flörsheim Availability: Immediately Fsdpfx Abowx Aadjvjpd

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, Connection: 220V, compressed air connection: 6 bar, weight approx. 110 kg, mobile, dowel feed via vibratory bowl feeder, automatic dowel length and diameter control, fully automatic electronic control system, functions: blowing, gluing, gluing & driving in, selector switch for glue/water for rinsing, glue residual quantity indicator, stainless steel glue tank, stainless steel water tank, 1x gun for dowel diameter 8 mm, length 20-50 mm, operating manual. Fpodpfx Aowrruqjbvjd

Stanje: rabljeno, Used machine Used line boring machine Ganner Compact 30 Features and technical data: - 2 drilling beams, each with 15 spindles Fpsdpfx Abswhuh Ssvjd - 32 mm pitch - Drilling unit position adjustment: 0 - 650 mm - Minimum distance between the rows of boreholes: 190 mm - Spindle speed: 2800 rpm - Motor power: 2 x 0.75 kW - Maximum clamping height of workpieces: 70 mm - Working height: 850 mm - Compressed air connection: 6 bar Availability: by arrangement Location: Solingen

Stanje: dober (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, dvoredna vrstna vrtalna stroj GANNER z 21 vreteni v vsaki vrsti Fsdpfxjxlt T Se Abvspd

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, - NEW - Make: Ganner Gannomat Model: SELEKTA 253 220 V, 1 Ph, 50 Hz Complete in standard configuration with: - Fully automatic electronic control with program selector switch for RINSING-GLUING-GLUING/INSERTING - Dowel feed via electronic vibrating feeder with potentiometer for stepless adjustment of dowel feed rate - Automatic dowel diameter and dowel length control with Auto-DL-Select system (automatic ejection of incorrect dowel lengths +/- 5 mm into the collection container) Fpsdpfedwi Rkjx Abvod - Closed glue system with 6 bar glue pressure via glue nozzle for adhesives with a viscosity of 150 to 350 mPas - Stepless electronic glue quantity adjustment with potentiometer via time preselection through electronic control - Selector switch GLUE/WATER for rinsing/cleaning the glue system with EasyClean function button (automatic cleaning program for glue hose and glue nozzle via spray funnel and wastewater collection container) - Control lamp for residual glue level display in the glue container - 1 stainless steel container for 5 kg glue and 1 stainless steel container for 5 l water for rinsing/cleaning - 4 castors for moving the machine Including 1 pistol for dowels Ø 8 mm, dowel length 25 - 40 mm, driving projection 7 - 20 mm Air connection: 6 bar Price from €11,750 ex stock 54634 Bitburg

Stanje: rabljeno, Leto izdelave: 2022, New exhibition machine! List price: €14,200.- 400V, 3Ph, 50Hz / 1.5 kW Complete in standard configuration with: - Fully automatic electronic control with pulse operation via foot pedal Functions: Clamping - Drilling - Releasing - Automatic electrical return of the drilling unit after reaching the set drilling depth Fedpfx Absqw Ek Ievopd - Automatic drilling depth extension for edge drilling; saves switching the drilling depth between face and edge drilling (+10 mm, e.g. with dowel length 35 mm, drilling depth edge 14 mm, drilling depth face 24 mm). - 1 drilling beam with 21 spindles, 32 mm spacing, 1.5 kW motor (drill feed 0-70 mm) - Includes 21x quick-change chucks (Ganner system) for easy tool change - Simple swiveling of the drilling unit from 0° to 90°, gas cylinder assisted - 1 clamping carrier, adjustable along Y-axis, with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm - Complete stop system consisting of: - 1 stop rail 1800 mm for shelf drilling (aluminium profile 40x40 mm) with 3 stop pins, quick-change system, easily shifted from right to left side for mirrored drilling of shelf holes in carcass construction, also suitable for series hole drilling in System 32 - Stop and position settings, as well as drilling height adjustment via support table with mechanical digital display; stops can be easily swung away for rapid conversion from cabinet to frame and vice versa - Support arms for clamping carrier for series hole positions up to max. 300 mm - Ideal three-stage tool system - 1 set of dowel drill bits: 5 carbide dowel drill bits, Ø 8x77 mm, right, 4 carbide dowel drill bits, Ø 8x77 mm, left Additional equipment: - Dust extraction funnel, dust-approved, Ø 120 mm - Full set for series drilling in System 32, consisting of: - 2 guide rails with scale and adapter for positions up to 300 mm max. - 2 pairs of stop blocks for series drilling, for Y-position 37 mm and e.g. 300 mm - 1 base rail 1000 mm (aluminium profile 40x40 mm) - 1 setting gauge for series drilling - 1 set of drill bits: 11 carbide drill bits, Ø 5x57 mm, right, 10 carbide drill bits, Ø 5x57 mm, left - Hydraulic brake cylinder - Clamping cylinder with additional holder Location: