Gallmac Wmw 115 nakup rabljenega (456)

Stanje: rabljeno, Technical details: Plate length: 255 mm Plate thickness: 65 mm 4 plates available T-slots according to DIN 650, suitable for T-slot nuts per DIN 508 Iasdpsu N D Icofx Abxsu a = 13.9 mm; b = 24.2 mm; c = 9.8 mm; h = 19.9 mm

Stanje: rabljeno, Tehnične podrobnosti: Širina: 1270 mm Globina: 1000 mm Višina: 1600 mm Na voljo 3 kosov vpenjalnih kotnikov T-utor po DIN 650: a=35 mm; b=60 mm; c=27 mm; h=65 mm Cena na kos kotnika Iaodpfx Aeu N Ea Hjbxju

Stanje: rabljeno, Technical details: Ijdpfx Abju N Ec Uexsau Width: 200 mm Depth: 300 mm Height: 500 mm Approx. machine weight: 38 kg per bracket 2 units available (price per unit)

Stanje: rabljeno, Technical details: Table clamping surface: 330 x 310 planed mm Machine weight approx.: 25 kg Dimensions (L x W x H): 430 x 400 x 420 mm Application: Machine table Isdpfxou N Eine Abxeau Adjustable clamping angle with 3 T-slots according to DIN 650: a=17; H027; b=32; c=14 mm, distance 100 mm Swivels via gear guide +90° Rotatable 360° Base surface Ø 350 mm with 2x clamping slot Ø 17 x 25 mm

Stanje: rabljeno, Leto izdelave: 1970, Technical details: Grinding length: 1000 mm Grinding width: 315 mm Workpiece height: 390/455 mm Transverse feed: 0.3–3.5 mm Longitudinal table travel: 1150 mm Table speed: 2.5–25 m/min Table size: 2120 x 600 mm Magnetic chuck size: 1000 x 315 x 100 mm Clamping area of the table: 1160 x 315 mm Grinding spindle infeed: 0.002–0.05 mm Distance from table to spindle center: max. 550 mm Spindle head overhang: 200–580 mm Grinding spindle speed: 1500 / 3000 rpm Total connected load: 10.5 kW Machine weight approx.: 5.0 t Machine dimensions approx. (LxWxH): 1.3 x 1.4 x 1.95 m Iaedpfxeu Nggze Abxou Coolant system dimensions (LxWxH): 0.7 x 0.7 x 0.55 m - Coolant system (tank with pump) - 2 grinding wheel arbors - 4 machine feet as per standard.

Stanje: rabljeno, Technical details: Table length: 865 mm Table width: 780 mm Table height: 40 mm Height above floor: approx. 815 mm Iajdpfx Abju Nkn Aexou Machine weight approx.: 140 kg Space requirement approx.: 0.87 x 0.8 x 0.82 m Marking-out plate – Surface plate Marking-out plate with 3 legs

Stanje: rabljeno, Technical details: Table length: 500 mm Table width: 500 mm Iasdpfx Absu Nkp Tjxeu Table height: 100 mm Height above floor: 100 mm Machine weight approx.: 52 kg Space requirement approx.: 500x500x100 mm

Stanje: rabljeno, Technical Details: Diameter: 250 mm Passage: Ø 80.0 mm Width: 80 mm Machine weight approx.: 18.0 kg Ijdpfx Abou Nla Hjxsau Dimensions: Ø 250 x W: 112 mm Three-jaw chuck made of steel Flange mount Ø 210 mm with 3 holes M12x44 Includes 1 set of 3 jaws

Stanje: rabljeno, Technical details: Faceplate diameter: 318 mm Faceplate width: 56 mm Maximum through-hole: Ø 54 mm Weight: 17 kg Dimensions: Ø 318 x W: 101 mm Iedeu Nlgmopfx Abxjau Technical features: - Jaws: 4 pieces, manually actuated, clamping range: external = max. Ø 280 mm, internal = min. Ø 40 mm

Stanje: rabljeno, Leto izdelave: 2001, Tehnične podrobnosti: Tlak: 250 t Izteg: 360 mm Razdalja miza/bate: 800 mm Maks. hod bata: 500 mm Hitrost povratka bata: 390 mm/s Hitrost napredovanja bata: 450 mm/s Hidravlični tlak: 280 bar Priključna moč: 43 kW Delovna hitrost: 11....50 mm/s Obratovalni tlak: 20 MPa Skupna potrebna moč: 20,5 kW Teža stroja pribl.: 17 t Iedpoxna Uzsfx Abxjau Mere stroja pribl. D x Š x V: 3,9 x 1,9 x 4,0 m

Stanje: rabljeno, Technical details: X-axis travel: 1000 mm Y-axis travel: 350 mm Z-axis travel: 400 mm Distance column – table edge: min. 150 / max. 550 mm Speed range: 28 – 1400 rpm / 18 steps Tool holder: ISO 40 (SK40) Milling head swivels left and right: 90° and forward/backward: 45° Feed, X/Y axis: 16 – 800 mm/min / 18 steps Table size: 1600 x 400 mm Table clamping surface: 1400 x 330 mm Total power requirement: 14.5 kW Weight approx.: 4000 kg Machine dimensions approx. LxWxH: 2.0 x 2.4 x 1.85 m Horizontal milling machine, converted with vertical milling head Iasdpev Sz Dijfx Abxsu

Stanje: rabljeno, Leto izdelave: 1989, Tehnične podrobnosti: Širina pločevine: 1600 mm Debelina pločevine: 20 mm Najmanjša debelina pločevine: 6 mm Število ravnalnih valjev: 11 Premer ravnalnih valjev: 180 mm Ravnalna hitrost: 10 m/min Priključna moč: 76 kW Skupna poraba moči: 75 kW Teža stroja pribl.: 39,2 t Iaodpfx Abjyvfy Tsxou Stroj za ravnanje hladne pločevine UBR 20x1600

Stanje: rabljeno, Technical details: Iedpfx Abowfrq Sjxjau Width: 400 mm Depth: 335 mm Height: 500 mm 2 units available (price per unit) Material: cast steel T-slots, transverse: number 4 Dimensions: a = 22 mm, h = 41 mm, b = 37 mm, c = 15 mm Clamping holes, number: 8 (size: 4 x 22 mm / 4 x 26 mm)

Stanje: rabljeno, Leto izdelave: 1957, Tehnične podrobnosti: Iodpsu Id D Usfx Abxsau Vrtalna zmogljivost v jeklu (premer): 20 mm Previs: 220 mm Vrtalni hod: 85 mm Razdalja vreteno/miza maks.: 260 mm Območje vrtljajev: klinasti jermen, obr/min Vpenjalo vretena MK: 2 Vpenjalna površina mize: 220 x 280 mm Vpenjalna površina osnovne plošče: 225 x 280 mm Razdalja sredina vretena do osnovne plošče: maks. 380 mm Skupna potrebna moč: 0,33 kW Teža stroja pribl.: 125 kg Mere (D x Š x V): 0,8 x 0,4 x 0,8 m Miza vrtljiva 380 V s priključnim kablom 2500 mm

Stanje: rabljeno, Technical details: Width: 190 mm Depth: 315 mm Height: 500 mm Machine weight approx.: 60 kg Iodpfx Aeu S Hzuobxeau 1 piece, shown at the back in the photo T-slot according to DIN 650: T-slot width a = 28 mm; h = 42 mm; b = 47.5 mm; 19.5 mm, T-slot spacing: 160 mm

Stanje: rabljeno, Technical details: Width: 500 mm Depth: 260 mm Height: 795 mm Machine weight approx.: 320 kg per unit 2 units available (price per unit) Iedpju S H Nlefx Abxjau without T-slots Base clamping long hole Ø 39 x 130 mm

Stanje: rabljeno, Technical details: Ijdpfxeu S H Stj Abxjau Width: 625 mm Depth: 520 mm Height: 820 mm Machine weight approx.: 300 kg per unit 2 units available (price per unit) without T-slots Long hole Ø 33 x 330 mm

Stanje: rabljeno, Leto izdelave: 1979, Technical details: Swing diameter over bed: 540 mm Turning length: 630 mm Distance between centers: 900 mm Center height over bed: 270 mm Center height over rear slide: 138 mm Swing diameter over rear slide: 250 mm Longitudinal travel: 700 mm Cross travel: 80 / 75 mm Spindle speeds: 1.8 - 450 rpm (8x stepless) Clamping diameter: 26 mm Feed range x-axis: 12 steps / 0.063 - 0.63 mm/rev Feed range y-axis: 36 steps / 0.070 - 1.11 mm/rev Tailstock quill: MT5 Tailstock quill travel: 250 mm Total power requirement: 7.0 kW Machine weight approx.: 3.76 t Dimensions (LxWxH) approx.: 3.2 x 1.2 x 1.8 m Application: Primarily for back turning and relief grinding of cutting tools (especially hobbing cutters, with or without thread pitch). Back turning and relief grinding possible from the front, the rear, and along the machine axis. Main drive via 8-step manual gearbox. Feed gearbox designed as a 12-step manual gearbox. Swivel range of the rear slide = 360°; Swivel range of the cross slide = 360°. Chuck is a taper disk Ø 200mm with MT5. Equipment: Mandrel Ø 49.5 x 400mm ARBAH-L 3+1 measuring system Iaedpfevbhv Rsx Abxeu FRENIC 5000G11 frequency inverter 3-jaw chuck Ø 250 mm in good condition.

Stanje: rabljeno, Technical details: Iasdpou Ng Npefx Abxou Grinding length: 300 mm Grinding spindle - rotatable: 350° Grinding spindle head adjustable: vertical: 250 mm Spindle head adjustment: crosswise: 230 mm Grinding spindle head adjustable: tiltable +/-15° Grinding diameter: Ø 250 mm Spindle speeds: 2200 - 3500 - 5200 rpm Work table: W: 120 x L: 950 mm Table movement: upper table swivable: right/left 45° Table movement: max. table travel: 500 manual mm Magnetic chuck surface: 305 x 130 x 100 mm Grinding wheel dimensions: cup wheel 125 x 20 Ø 32 mm Total power requirement: 1.8 kW Machine weight approx.: 1.0 t Machine dimensions approx. LxWxH: 1.6 x 1.3 x 1.7 m Hydraulic unit dimensions: 600 x 550 x 870 mm Accessories: Universal clamping head Morse taper MK5 Drill bit grinding fixture Ø 10 mm

Stanje: rabljeno, Technical details: Table length: 1000 mm Ijdou Nkkkspfx Abxoau Table width: 1000 mm Machine weight approx.: 0.531 t Space requirement approx.: 1.0 x 1.0 x 0.8 m The marking plate is mounted on a sturdy welded construction made of 60 mm steel angle.

Stanje: rabljeno, Technical details: Iajdeu Nkpyopfx Abxeu Plate length: 660 mm Plate width: 450 mm Plate height: 70 mm Table through-hole: Ø 115 mm Machine weight approx.: 111 kg Space requirement approx.: 660x450x70 mm Through-hole: 115 mm T-slots: according to DIN 650 and 508 - a = 22 mm - b = 38 mm - h = 40 mm - c = 17 mm

Stanje: rabljeno, Technical details: Piston diameter: Ø 160 mm Weight: 200 kg Dimensions: 0.6 x Ø 0.3 m Draw cushion for a WMW Erfurt press PYE 160 Blank holding force: 50 metric tons (MP) Ejector force: 4 metric tons (MP) Stroke: up to 160 mm Iedpfxou Nurfo Abxeau Flange diameter: Ø 280 mm Piston centering bore: M16, mounting holes: M24, Ø 118 mm Hydraulic connection: 2x 1 inch internal thread (i.D.)

Stanje: rabljeno, Leto izdelave: 1980, Technical details: Pressing force: 400 t Stroke: 40 - 140 mm Strokes/min, continuous: 32 Throat depth: 400 mm Shut height, min/max: 450/590 mm Ram adjustment: 125 mm Table size: 1250 x 750 mm Height above floor: 1130 mm Total power requirement: approx. 31.5 kW Machine weight, approx.: 23.0 t Machine dimensions (LxWxH): 3.7 x 1.7 x 3.9 m Control cabinet dimensions (LxWxH): 1.0 x 0.7 x 2.1 m Additional features: - Clamping plate L:1260 x W:760 x H:100 mm - Equipped with drawing device, force: 250 kN, stroke approx. 83 mm Iedpfx Aeu N A Uuebxjau - Operation via control panel No UVV (accident prevention regulations) In operation.

Stanje: rabljeno, Leto izdelave: 1980, Détails techniques : Pression : 160 t Course : 20-160 mm Profondeur de col de cygne : 400 mm Réglage du coulisseau : 120 mm Nombre de courses : 71 cp/min Hauteur d'installation table/coulisseau en haut : 720 mm (course 160 mm) Hauteur d'installation table/coulisseau en bas : 560 mm (course 160 mm) Surface du coulisseau : 900 x 660 mm Passage entre les montants : 500 x 450 mm Surface de la table (LxlxØ) : 1200 x 750 x 100 mm Puissance totale requise : env. 23,0 kW Poids de la machine env. : 15,0 t Dimensions de la machine (LxlxH) : 2,7 x 1,5 x 3,45 m Dimensions de l'armoire électrique (LxlxH) : 2,0 x 0,65 x 2,15 m Iodpju N A U Ijfx Abxoau Commande via pupitre/pupitre sur pied/pédale et boîtier de commande manuel. La presse peut être proposée selon deux options : 1ère option : Vente en l'état, non raccordée, non complète, non fonctionnelle. 2ème option : La presse est remise à neuf, toutes les pièces sont remplacées, rénovées et contrôlées. La presse est entièrement révisée. Pour toute demande concernant cette presse, veuillez indiquer l'option d'offre souhaitée ! i. D.

Stanje: rabljeno, Technical Details: Plate length: 800 mm Plate width: 455 mm Plate height: 75 mm Machine weight approx.: 264 kg Transport dimensions (LxWxH): 800 x 455 x 250 mm Ram/platen plate removed from a PYE 160S press - with central through-hole Ø 40mm - with 6 pitch circle bores Ø 16mm, pitch circle Ø 160mm - diagonal T-slot according to DIN 650 (a=19mm; h=25mm; b=38mm; c=16mm) Isdpfou N Dhiox Abxsau - with support plate underneath = distance approx. 410mm