Gallmac Wmw 115 nakup rabljenega (461)

Stanje: rabljeno, Technical Details: Length: 1000 mm Width: 630 mm Height: 40 mm Height above floor: 680 mm Machine weight approx.: 250 kg Kfedpju Nki Tofx Ah Asa Required space approx.: L:1.0 x W:0.63 x H:0.68 m MEASURING AND INSPECTION PLATE Material made of special cast iron with steel additive Surface hand-scraped and spotted 3 supports (made of cast iron) for height adjustment Condition: good used condition

Stanje: rabljeno, Technical Details: Table diameter: 450 mm Table height: 160 mm Rotational movement: 360 degrees Passage: 40 mm Machine weight approx.: 150 kg Space requirement approx.: 650 x 600 x 170 mm Base footprint: 620 x 420 mm Kodpfx Aou Nknceh Asfa T-slots: as per DIN 650 and 508 T-slots: 8x radial, 4x 163 mm long and 4x 135 mm long - a = 12 mm - h = 19 mm - b = 21 mm - c = 9 mm

Stanje: rabljeno, Technical Details: Machine weight approx.: 179 kg Space requirement approx.: 0.75 x 0.335 x 0.340 m Application: For forging work Material: Cast steel Working surface (LxW): 510 x 140 mm Kfjdpfeu Nkw Rjx Ah Aja Horn length: 225 mm, diameter 28 - 110 mm Hardy hole (square): 28 x 28 mm

Stanje: rabljeno, Technical Details: Faceplate diameter: 620 mm Inner diameter: 160 mm Dimensions: 620 x 160 x 140 mm Machine weight approx.: 160 kg Four-jaw chuck Flange mount / diameter: - Through-bore: 160 mm - Flange diameter: 197 mm - Pitch circle: 235 mm - Jaws are individually adjustable/guided. - Supplied with chuck key All details are approximate values! Kfsdou Nk Dwopfx Ah Asa

Stanje: rabljeno, Technical details: Diameter: 250 mm Passage: Ø 80 mm Width: 106 mm without flange Approximate machine weight: on request kg Dimensions: Ø 250 x W: 140 mm Three-jaw chuck made of steel Ksdou Nlatjpfx Ah Aofa - incl. chuck key - incl. 2 sets of 3 jaws - Flange: size Ø 250 x 26 mm; fastening with 4 clamping bolts on a pitch circle Ø 170 mm

Stanje: rabljeno, Technical details: Load capacity: 7.0 t Dimensions (LxWxH): 3.4 x 0.12 x 0.51 m The lifting beam is sold without load hooks. Design: I-beam, welded steel plate Lifting lug: Ø 80 x 130 mm Load lifting lugs: Ø 45 x 3050 mm (center-to-center) Condition: sold without safety approval (UVV). Kedpfx Ahju Nvm Rj Asfa *

Stanje: rabljeno, Technical Details: Pressure: 2 t Clearance: see text mm Stroke: see text mm Press force: approx. 2 kN Kfsdpfx Ahou N Ay Rj Asa 5 arbor presses, each with 2 kN No. 2: Throat depth 105 mm; Ram-to-table distance 95 mm; Ram stroke 36 mm; Table size L:120 x W:140 mm; Weight 17 kg; Dimensions L:270 x W:220 x H:420 mm No. 3: Throat depth 90 mm; Ram-to-table distance 190 mm; Ram stroke 45 mm; Press force 3 kN; Ram height adjustment 150 mm with hand crank; Table size L:120 x W:160 mm; Weight 26 kg; Dimensions without wooden base L:235 x W:160 x H:730 mm No. 4: Throat depth 80 mm; Ram-to-table distance 220 mm; Ram stroke 40 mm; Ram height adjustment 150 mm with hand crank; Table size L:110 x W:160 mm; Weight 30 kg; Dimensions without wooden base L:230 x W:180 x H:700 mm No. 5: Throat depth 80 mm; Ram-to-table distance 220 mm; Ram stroke 40 mm; Ram height adjustment 150 mm with hand crank; Table size L:110 x W:160 mm; Weight 30 kg; Dimensions without wooden base L:230 x W:180 x H:700 mm, incl. fixture No. 7: Throat depth 130 mm; Ram-to-table distance max. 95 mm; Ram stroke 20 mm; Table size L:50 x W:80 mm; Weight 17 kg; Dimensions L:330 x W:160 x H:380 mm, incl. punching tool

Stanje: rabljeno, Technical details: Plate length: 1345 mm Plate width: 845 mm Plate height: 28 mm Machine weight approx.: 260 kg Transport dimensions LxWxH: 1500 x 900 mm Steel plate, cast steel, used, with various mounting holes M12 Kjdpfx Aou N Dg Sjh Asfa with various (9x) through-holes Ø 13 mm

Stanje: rabljeno, Technical details: Ksdpfsu N Dq Rjx Ah Asfa Plate length: 4750 mm Plate width: 1850 mm Plate height: 200 mm Machine weight approx.: 4785 kg Cast steel plate for sale, available immediately. T-slots according to DIN 650 a = 42 mm; b = 74 mm; h = 65 mm Distance from edge to first T-slot = 150 mm Distance between T-slots = 310 mm

Stanje: rabljeno, Technical details: Kodpfxeu N Dxzo Ah Asfa Length: 600 mm Width: 300 mm Dimensions (L x W x H): see item description Various spotting and measuring plates No. 3: Size 200 x 200 mm with small quadrants No. 4: Size 200 x 200 mm No. 5: Size 580 x 285 mm No. 6: Size 300 x 300 mm No. 7: Size 160 x 160 mm No. 10: Size 400 x 280 mm No. 11: Size 400 x 255 mm, 24 kg

Stanje: rabljeno, Technical details: Kedou N D Dwepfx Ah Asfa Plate length: 510 mm Plate width: 270 mm Plate thickness: 65 mm 2 plates available T-slots according to DIN 650 for T-slot nuts according to DIN 508 a = 13.9 mm; b = 24.2 mm; c = 9.8 mm; h = 19.9 mm

Stanje: rabljeno, Technical details: Plate length: 205 mm Plate width: 195 mm Plate thickness: 65 mm 14 plates available T-slots according to DIN 650 for T-slot nuts according to DIN 508 a = 13.9 mm; b = 24.2 mm; c = 9.8 mm; h = 19.9 mm Kfodpfxsu N D H Eo Ah Aoa

Stanje: rabljeno, Technical details: Width: 655 mm Depth: 500 mm Height: 500 mm Machine weight approx.: 197 kg Dimensions L-W-H: 420 x 655 x 500 mm Design: Angle frame with double reinforcement Vertical plate: - Size: W:655 x H:500 x Thickness: 40 mm - with clamping holes, elongated holes, and central bore Base plate: - Size: W:655 x L:420 x Thickness: 40 mm Ksdpfou N D Snex Ah Asfa - with elongated holes

Stanje: rabljeno, Technical details: Width: 700 mm Depth: 600 mm Height: 910 mm Machine weight approx.: 440 kg Dimensions L-W-H: D: 600 x W: 700 x H: 910 mm Steel plate welded, 80 mm thick, with reinforcement Surface planed Clamping surface vertical: 6x T-slots according to DIN 650: a=24mm; h=45mm; b=43mm; c=18mm; spacing 140mm Mounting surface base: L: 600mm x W: 700mm, 7x clamping bores Kfedpfx Aeu N Eatoh Aea

Stanje: rabljeno, Leto izdelave: 1984, VERTICAL MILLING HEAD Accessory for a Fritz Heckert FSS 400 milling machine - Weight: 255 kg - Dimensions (LxWxH): 560 x 500 x 400 mm Kfsdpfx Ahsu N E Abs Aea - Swivels 90° to the right / left - Clamping area: 500 x 400 mm

Stanje: rabljeno, Technical details: Width: 400 mm Depth: 335 mm Kfjdpfx Ahou S Hywo Aoa Height: 500 mm Approx. machine weight: 100 kg T-slot according to DIN 650: T-slot width a = 22 mm; h = 39.5 mm; b = 40 mm; c = 17.5 mm; T-slot pitch: 125 mm

Stanje: rabljeno, Technical Details: Kfodpfx Aewb D H Doh Aea Table length: 400 mm Table width: 225 mm Width: 400 mm Depth: 225 mm Height: 300 mm Dimensions (L x W x H): 400 x 225 x 300 mm Weight: approx. 34 kg / angle 2 pieces available (price per unit) with elongated holes Material: cast steel Surface: planed

Stanje: rabljeno, Technical details: Turning length: 630 mm Swing diameter over slide: Rear slide: 250 mm Centre height over bed: 270 mm Centre distance: 900 mm Spindle bore: 26 mm Stepless speed range: 1.8 - 450 rpm Reverse speed: 23 / 32 / 46 / 370 / 510 / 740 rpm Cross feed: 0.07 - 1.11 / 36 steps mm/rev Longitudinal feeds: 0.063 - 0.63 / 12 steps mm/rev Tailstock quill taper: MT 5 Kjdevbh N Ropfx Ah Ajfa Quill travel: 250 mm Total power requirement: 7.0 kW Machine weight approx.: 3.9 t Machine dimensions approx. LxWxH: 3.2 x 1.2 x 1.8 m Application: Mainly for relief turning and relief grinding of cutting tools (particularly hobbing cutters with/without thread pitch). Relief turning and relief grinding is possible from the front, rear and along the axis of the machine. Main drive via an 8-speed manual gearbox. Feed gearbox is designed as a 12-speed manual gearbox. Swivel range of the rear slide = 360 degrees Swivel range of the cross slide = 360 degrees Equipment: Lathe chuck / Driver plate Ø 210 mm with fixed centre Fixed centre in the tailstock Comes with 4 machine feet 3-jaw chuck Ø 250 mm internal diameter. *

Stanje: rabljeno, Technical details: Diameter: 250 mm Width: 80 mm Speed: 1800 rpm Machine weight approx.: 17 kg Dimensions: Ø 250 x W: 110 mm Flange mount on the main body = Ø 210 x 6 mm, pitch circle Ø 228 mm with 3x M12 tapped holes Kfjdovgbhqepfx Ah Aja Incl. 3 pieces of soft top jaws mounted as outside jaws, clamping range external max.: Ø 60 - 188 mm and internal max.: Ø 17 - 192 mm Equipment: with chuck key

Stanje: rabljeno, Technical details: Kjdsu Ic Ewspfx Ah Aofa Sheet width: 250 mm Sheet thickness: 2 mm Number of rollers: 11 Leveling speed: 5...30 m/min Infeed height: 1250 mm Total power requirement: 4.0 kW Machine weight approx.: 620 kg Machine dimensions: 1.15 x 1.02 x 1.5 m Switch cabinet dimensions (LxWxH): 0.66 x 0.53 x 0.32 m STRIP LEVELING LINE WITH FEEDER Features: - Lateral strip guiding rollers Design: - Strip infeed height, horizontal: 1250 mm - Tiltable: positive 30°; negative 15°

Stanje: rabljeno, Technical details: Pressing force: 40 t Throat depth: 365 mm Distance table/ram: 800 mm Ram stroke – max.: 500 mm Ram return speed: 0.45 m/sec Ram advance speed: 0.10 m/sec Ram surface: 450 x 360 x 74 mm Table surface: 630 x 500 x 73 mm Passage hole in table: Ø 205 mm Table height above floor: 720 mm Total power requirement: 13.0 kW Machine weight approx.: 3.2 t Machine dimensions approx. LxWxH: 1.7 x 1.1 x 3.0 m Further technical features: Kodpfxeu Nfuqe Ah Ajfa -Braking time: 443 ms -Braking distance: 9 mm -Last machine inspection: May 2020, valid for 1 year

Stanje: rabljeno, Leto izdelave: 1985, Technical details: Kfsdpfou Nfvbsx Ah Aja Pressing force: 3 t Throat depth: 150 mm Maximum ram stroke: 280 mm Shut height with bolster/riser plate: 355 mm Distance table to ram: 355 mm Clamping plate on table: 280 x 290 x 50 mm Drop-through opening in table: Ø 100 mm Ram speed, forward: 0.1 m/s Ram speed, return: 0.3 m/s Ram bore: Ø 20 x 40 mm Height above floor level: 800 mm Total power requirement: 1.5 kW Approx. machine weight: 370 kg Machine dimensions (LxWxH): approx. 0.8 x 1.2 x 1.9 m The C-frame press is mounted on a base table (welded steel sheet). Operation via foot switch. The press has been retrofitted with: - Reel holder for film with pneumatic feed and punching device - FIBRO punching device (plastic disc Ø 47.5 mm for punching) - Foot control

Stanje: rabljeno, Technical Details: Pressure: 2.5 t Reach/Throat Depth: 155 mm Maximum Ram Stroke: 280 mm Distance Table to Ram: 450 mm Clamping Plate on Table: 260 x 1000 mm Ram Advance Speed: 0.08 m/s Ram Return Speed: 0.32 m/s Ram Bore: Ø 20 x 45 mm Height Above Floor: 930 mm Total Power Requirement: 1.1 kW Machine Weight approx.: 500 kg Machine Dimensions (LxWxH) approx.: 0.85 x 1.0 x 1.7 m The machine is equipped for straightening operations. Kjdpfxeu Nfv Us Ah Aofa

Stanje: rabljeno, Technical details: Kjdou Ngdtepfx Ah Aofa Height above floor: 930 mm Machine weight approx.: 75 kg (+ 27 kg base frame) Dimensions (L x W x H): 0.6 x 0.48 x 0.43 m EDGE BEVELING MACHINE Application: For beveling Machine table (W x D): 600 x 240 mm with guide rail (L x H): 400 x 25 mm Installed tool: Cutter approx. 50 mm with 45° milling profile Bevel width: approx. 6 mm Voltage: 380 V with ON/OFF switch

Stanje: rabljeno, Leto izdelave: 1980, Technical specifications: X-axis travel: 850 mm Y-axis travel: 280 mm Z-axis travel: 355 mm Spindle mount ISO: SK 45 / SK 45 Spindle head swivels left and right: 90° each Speed range: 28 – 1400 / 18-step rpm Distance table/horizontal spindle: min. 60 / max. 180 mm Clamping surface of table: 1070 x 270 mm Table load capacity: 1000 kg Table swiveling: +/- 45° each Feed rate: X+Y: 16 – 800 mm/min, Z: 5 – 250 mm/min Total power requirement: 8.0 kW Machine weight approx.: 3100 kg Machine dimensions (L x W x H) approx.: 2.1 x 1.8 x 2.15 m Control cabinet dimensions: L: 0.8 x W: 0.45 x H: 1.65 m Kfjdpfju Ndf Iox Ah Aea Clamping surface: 315 x 1250 mm Beam adjustment, horizontal, manual: 650 mm Mounted on the table: Clamping chuck with 3-jaw chuck Ø 200 mm with internal jaws, center height 165 mm Coolant unit Hand crank Milling arbor Ø 22 x 620 mm with form cutter Ø 80 x Ø 8 mm