Sredinski stružnica in stružnica za vreteno

WMW-NILES DLZ 1200

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 630 mm, izvrtina vretena: 320 mm, premer struženja: 1.200 mm, premer struženja nad ležiščem sani: 930 mm, stružna dolžina: 3.000 mm, Lathe in very good technical condition, has seen very little use and was not utilized for machining pipes. Poręba TPL 90/3m lathe (also listed in market nomenclature as a variant of the TPK 90 series) is a textbook example of an Oil Country Lathe / Hollow Spindle Lathe. This model meets all the specific criteria for machines intended for the Oil & Gas sector: • Huge spindle bore (Big Bore): Machines in this version have a spindle bore diameter of 320 mm (approx. 12.5 inches), which allows for easy passage of thick-walled drill and casing pipes. • Dual chuck system: The headstock construction allows for the installation of two independent lathe chucks (front and rear, typically with a diameter of 28 inches), which clamp and stabilize the pipe at both ends of the spindle. • Optimal working range: The 3m designation defines the turning length between centers (3000 mm), which, combined with the swing over bed of 930 mm (hence the 90 in the model name), enables machining of massive pipeline elements. • Extreme rigidity: FUM POREBA products are renowned for their monolithic, very wide, and heavy cast iron beds, which effectively dampen the significant vibrations generated during thread cutting, especially with tapered threads. In international used machinery catalogs, this specific Poręba model is categorized directly under Oil Field Lathes. TECHNICAL DATA: Geometric parameters and machining ranges • Swing over bed: 930 mm / 36.6" • Swing over cross slide: 630 mm / 24.8" • Swing in gap: 1200 mm / 47.2" • Maximum turning length between centers: 3000 mm / 120" • Bed width: 585 mm / 23.0" Headstock Gusdpfey Sf Azjx Ab Esh • Spindle bore diameter (Hollow Spindle): 320 mm / 12.6" (classified in US nomenclature as 12.5" version) • Spindle speed range: 5 – 250 rpm or modified versions up to 710 rpm • Number of spindle speed steps: 18 Feed and threading system • Longitudinal feed range: 0.1 – 12.8 mm/rev / 0.004 – 0.504 in/rev • Cross feed range: 0.05 – 6.4 mm/rev / 0.002 – 0.252 in/rev • Types of threads cut: Metric, Inch (Whitworth), Module, Diametral Pitch (DP) Tailstock • Tailstock quill diameter: 130 mm / 5.1" • Tailstock quill stroke: 300 mm / 11.8" • Quill taper: Morse No. 6 (MT6) Drive and overall dimensions • Main motor power: 22 kW / 29.5 HP • Total machine length: approx. 5500 mm / 216.5" • Total machine width: approx. 1750 mm / 68.9" • Total machine height: approx. 1500 mm / 59.0" • Total machine weight: approx. 8000 kg / 17,630 lbs

Leto izdelave: 2002, stanje: nepreverjeno (rabljeno), Robot Gjdpfx Absgu U Itj Ejuh No operator panel + connection cables Used, untested robot. No teach pendant. Not tested.

Stanje: dober (rabljeno), Leto izdelave: 1970, Ref. št.: 10575 Proizvajalec: VDF BOEHRINGER Tip: T 11 Leto izdelave: 1970 Način vodenja: Konvencionalen Krmiljenje: n/a Lokacija skladišča: Halberstadt Država izvora: Nemčija Št. stroja: 40XXX Premer struženja: Ø 700 mm Dolžina struženja: 3000 mm Premer vretena: Ø 750 mm Vrtina vretena: 70 mm Premer vrtenja nad prečnim suportom: Ø 450 mm Guodpsxmd Uvofx Ab Eoh

Stanje: zelo dobro (rabljeno), Prodam ta stroj, priključen, možno preizkusiti. Maks. premer obdelovanca ..... 1600 mm Modul ..... 16 - Moč glavnega elektromotorja ..... 12 kW Dimenzije d x š x v ..... 4300 x 2000 x 3170 mm Teža stroja ..... 18500 kg Video stroja lahko pošljem preko aplikacije WhatsApp. Gujdpfov Nqppjx Ab Esh

Leto izdelave: 1993, stanje: pripravljen za uporabo (rabljen), Višina konice: 280 mm, razdalja med konicama: 2000 mm, premer struženja nad posteljo/na vozičku: 570 mm/365 mm, vretenina odprtina: 62 mm, število vrtljajev: 2500 obr/min, maksimalna teža obdelovanca: 1000 kg, širina postelje: 360 mm. Dimenzije stroja X/Y/Z: pribl. 4000 mm/2250 mm/2000 mm, teža: pribl. 5500 kg, krmilje: Siemens. Ogled na lokaciji je možen. Gusdoxq Eyuopfx Ab Ejh

Stanje: rabljeno, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel/grey cast iron Table unit with clamping plate and very massive guideway Table clamping area: 5500 x 2000 mm Travel of table clamping plate: approx. 3100 mm Table height / construction height: 1050 mm Table load capacity: max. 20 tons Ball screw: Ø 100 mm Lead: 20 mm (single start) - Machining table is very stably guided on the bed - Metal telescopic guideway cover - From a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots (28 mm) - Drive via SIEMENS servomotor 1FT6134-6AB71-1AG2 with encoder IC200448S/R (RN 000 B25) Overall length: 9500 mm Width: 2000 mm Construction height: 1050 mm Gjdpfx Asthuzpeb Eeuh Net weight: 28 tons Good condition

Stanje: rabljeno, Gear milling cutter Module 8 Guodpfxodklt Ne Ab Eeh 20 degrees Length: 1800 mm Diameter: 120 mm Bore: 40 mm

Stanje: novo, Leto izdelave: 2025, Ref. No.: 10465 Manufacturer: IGREK Model: FR 1000 T Year of manufacture: 2025 Guedpfoxmd S Ijx Ab Eeh Control type: CNC control Control system: Siemens / Heidenhain Location: Istanbul Country of origin: Türkiye X-axis travel: 1350 mm Y-axis travel: 1500 mm Z-axis travel: 900 mm B-axis: ° C-axis: 360° Spindle taper: HSK-T100 Rotary table diameter: 1000 mm Table load capacity: 2000 kg Tool magazine: 48 pcs. Spindle speed: 15,000 rpm Rapid traverse X/Y/Z: 48 m/min Spindle motor power: 35 kW Max. spindle torque: 220 Nm Machine length: 3200 mm Machine width: 6400 mm Machine height: 4050 mm Machine weight approx.: 40 t Additional information: IGREK FR 1000 T – Compact Precision for Demanding Applications The IGREK FR 1000 T is a CNC-controlled turning and milling center with 5-axis simultaneous machining, combining cutting-edge technology in a compact design. Manufactured in 2024, this machine is immediately available and ideally suited for the precise machining of medium-sized workpieces across various industries. Key features: Compact Power: With axis travels of 1,350 mm (X), 1,500 mm (Y), and 900 mm (Z), and a table load capacity of up to 2,000 kg, the machine offers optimal conditions for flexible applications. 5-axis Simultaneous Machining: The B-axis (° / °) and C-axis (360°) enable precise processing of even the most complex geometries. High-performance Spindle: The spindle reaches speeds of up to 15,000 rpm, maximum torque of 220 Nm, and a drive power of 35 kW – ideal for demanding milling operations. Extended Capacity: A tool magazine with 48 positions and HSK-T100 taper allow for quick changes and efficient processes. Top-tier Speed: Rapid traverse rates of 48 m/min on all axes minimize machining times. Technical Data Overview: Axis Travels: X 1,350 mm / Y 1,500 mm / Z 900 mm Rotary table diameter: 1,000 mm Max. table load: 2,000 kg Spindle power: 35 kW Spindle speed: up to 15,000 rpm Machine dimensions (LxWxH): 3,200 x 6,400 x 4,050 mm Weight: approx. 40 tonnes Additional Benefits: Thanks to state-of-the-art controls (Siemens or Heidenhain) and a robust machine concept, the IGREK FR 1000 T is suitable for both single-piece and series production. The manufacturer offers international service and comprehensive warranty coverage. Discover the IGREK FR 1000 T as your reliable partner for precise and efficient manufacturing – now available from stock. Contact us for further information!

Stanje: dober (rabljeno), Manufacturer: STANKO Model: 7D430 Year of manufacture: 1994 Table rotation: 360° Head tilting: up to 10° possible Guodpfx Ajwpud Asb Eoh Large cabinet with slotting and keyway tools Lubrication system Completely overhauled in 1994 Specifications Metric US Standard Table diameter Ø: 630 mm Table load capacity: 1000 kg Ram stroke: 320 mm X-axis travel: 650 mm Y-axis travel: 510 mm Overhang: 500 mm Number of strokes: 3 – 38 m/min Power: 12 kW Dimensions (approximate): Length: 3000 mm Width: 2200 mm Height: 3000 mm Weight: 6150 kg Please note: The information provided on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The data is supplied in good faith but accuracy cannot be guaranteed. Accordingly, these details do not constitute representations or terms of contract. We recommend verifying all critical information.

Stanje: dober (rabljeno), Leto izdelave: 1984, Wheel diameter - max. 250 mm Wheel width 275 mm Module - max. 6 Machine weight approx. 5.5 t The ZFWZ 250 gear hobbing machine is designed for the efficient production of all hobbed cylindrical gears, such as: - Straight and helical gears, worm wheels and worms, splined shafts, keyed shafts, serrated gears, chain wheels, ratchet wheels, as well as conical and crown-shaped straight and helical gears. Change gears and milling accessories Technical Data: - Workpiece diameter (max): 250 mm - Module (max): 6 mm - Axial feed travel (max): 275 mm - Tangential feed travel (max): 100 mm - Helix angle (max): 45 degrees - Cutter diameter (max): 145 mm - Cutter length (max): 170 mm - Table clamping surface (min): 195 mm - Table clamping surface (max): 470 mm Performance Cutter speeds Guedpev T Nqaofx Ab Esh - Two-range, stepped: 56 ... 250 rpm - (Standard version): 90 ... 400 rpm - Infinitely variable in two ranges: 63 ... 180 rpm - (Special version with DC motor): 140 ... 400 rpm Weight - Net weight of the machine: approx. 5,000 kg - Electrical cabinet: approx. 800 kg - Hydraulic unit + coolant tank + chip conveyor: approx. 700 kg Overall dimensions (with oil mist filter) - Length: Standard version: 3,950 mm DC drive: 3,450 mm (or 3,350 mm according to the table) - Width: 3,300 mm - Height: Machine: 1,980 mm Machine with DC drive: 2,150 mm Electrical cabinet: 2,200 mm