Emco Star nakup rabljenega (150)

Stanje: dober (rabljeno), potovalna razdalja osi X: 650 mm, pomik osi Y: 550 mm, pomik po osi Z: 500 mm, Manufacturer: EMCO Model: MAXXMILL 500 new 2014 Control: SIEMENS 840D Year of manufacture: 2014 High-performance spindle: 34.5 kW and 110 Nm torque One setup can machine 500 x 500 x 475 mm (5 sides) Top machine for medium-sized production runs from 15 to 300 pieces 3,560 spindle hours Specifications Knsdpstw Rnfjfx Ah Asf Metric | US Standard X-axis travel: 650 mm Y-axis travel: 550 mm Z-axis travel: 500 mm A-axis travel: -100° to +100° B-axis travel: 360,000° Table length: 600 mm Table width: 600 mm Table load capacity: 250 kg Feed rate X-axis: 30,000 mm/min Feed rate Y-axis: 30,000 mm/min Feed rate Z-axis: 30,000 mm/min Tool holder: ISO 40 ISO/BT/MK Spindle power: 34 kW Max. spindle speed: 10,000 rpm Tool changer: 30 positions Internal coolant supply (IKZ): 20 bar Number of controlled axes: 5 Chip conveyor: Yes Cooling system: Yes Approximate dimensions Length: 2,900 mm Width: 3,300 mm Height: 3,000 mm Weight: 9,200 kg Please note: The information on this page has been provided to the best of our knowledge and, whenever possible, obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Therefore, this information does not constitute a representation or contractual terms. We recommend verifying all critical details.

Stanje: dober (rabljeno), Leto izdelave: 2006, Maszyna używana wyłącznie do tworzyw sztucznych. Szczegółowe dane techniczne znajdują się w załączonym dokumencie PDF. Części prezentowane ręcznie nie wchodzą w zakres dostawy. Knedpju Ibihsfx Ah Ajf

Stanje: rabljeno, Leto izdelave: 1999, Technical details: Swing diameter over bed: 340 mm Swing diameter over support: 190 mm Turning length: 700 mm Distance between centers: 700 mm Spindle speeds: 55 - 2350 rpm / 8-step mechanical Spindle bore: 50 mm Tailstock quill travel: 120 mm Tailstock quill: MT3 Spindle torque: 350 Nm Kedpeu Ixw Aefx Ah Asnf Maximum workpiece weight – between centers: 50 kg Total connected load: 3.0 kVA Machine weight approx.: 0.79 t Machine dimensions approx. LxWxH: 1.6 x 0.9 x 1.4 m 3-jaw chuck Forkardt Ø 200 (external clamping) Longitudinal slide X-axis travel: 600 mm; longitudinal feed 0.045 - 0.787 mm in 20 steps; metric thread Cross slide Y-axis travel: 220 mm; feed 0.023 - 0.406 mm in 20 steps Top slide swivels 60° right and 120° left Thread cutting Machine lighting No coolant system (pre-installed) Accessories: 3 sets of turning jaws 3x Multifix toolholders 2x drill chucks 1x live center 3 machine feet

Stanje: dober (rabljeno), Leto izdelave: 2011, obratovalne ure: 4.700 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S6CZ1151, izvrtina vretena: 65 mm, največja hitrost vretena: 5.000 obr/min, moč vretenovega motorja: 29.000 W, prehod palice: 65 mm, Oprema: dokumentacija / priročnik, podajalnik palic, Jahr: 2011 Betriebsstunden: 4.700h (steigend) Drehdurchmesser: 65 mm CNC-Typ: Fanuc 18i-TB Anzahl der Revolver: 1 Achsen: X, Y, Z und C Anzahl Revolverplätze: 12 Anzahl angetriebener Werkzeugplätze: 12 Kodoxwp I Ajpfx Ah Aonf Haupt- und Gegenspindeldrehzahl: 5.000 U/min Leistung Haupt- und Gegenspindelmotor: 29 kW Abmessungen (L x B x H): 3.302,0 × 2.057,4 × 2.032,0 mm Gewicht: 5.700 kg Späneförderer IEMCA MASTER 880r Verso Stangenlader (3m Stangenlänge + Lademagazin) Zahlreiche mitgelieferte feste und angetriebene Werkzeughalter: - 3 axiale angetriebene Werkzeughalter - 4 radiale angetriebene Werkzeughalter - 2 schwenkbare angetriebene Werkzeughalter (0-90°) - 5 feste Drehmeißelhalter - 7 feste Bohrhalter - 1 Stechhalter 2 Backenfuttersätze (Haupt- und Gegenspindel). Die Maschine ist aktuell im Einsatz, kann aber innerhalb von 4 Wochen verfügbar gemacht werden. Die Abholung erfolgt am Standort (Saint Pierre en Faucigny). Verlade- und Transportkosten trägt der Käufer.

Stanje: dober (rabljeno), Leto izdelave: 1996, Rezkalni stroj, univerzalni rezkalni stroj, orodjarski rezkalni stroj, vrtalno-rezkalni stroj -Proizvajalec: EMCO, rezkalni stroj z digitalnim prikazom in hidravličnim vpenjanjem -Miza za vpenjanje: 800 x 400 mm -Miza za vpenjanje: vrtljiva/nagibna/zvihljiva -Hodi X/Y/Z: 600/400/400 mm -Vpenjalo vretena: SK40 s hidravličnim vpenjanjem -Pribor: vključuje 9 držal za orodje, glejte fotografije -Hitrosti vretena: od 63 do 3150 o/min -Podajalnik X/Y: 16-800 mm/min -Podajalnik Z: 8-400 mm/min -Izvlek pinole: 100 mm -Hitri pomik X/Y: 2000 mm/min -Hitri pomik Z: 1000 mm/min -Naprava za hlajenje: da -Dimenzije: 1740/1670/V1940 mm -Teža: 2200 kg Knjdpfx Ahsxvraxo Aof

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 300 mm, premer struženja: 200 mm, potovalna razdalja osi X: 100 mm, pomik po osi Z: 200 mm, skupna višina: 1.600 mm, skupna dolžina: 2.000 mm, skupna širina: 1.000 mm, skupna masa: 300 kg, Obratovalna napetost: 230 V Frekvenca: 50-60 Hz Knodpfx Ahjw Ivvie Ajf Nazivni tok: 11 A Krmiljenje: EMCO EASY 2CONTROL (HEIDENHAIN TNC 640, SIEMENS SINUMERIC 840) Stružna dolžina: pribl. 300 mm Višina konice nad ležiščem: pribl. 100 mm Pomiki: X: pribl. 100 mm Z: pribl. 200 mm Stroj je opremljen z konjičkom, trikrako glavo, posebno revolversko glavo za orodje, mobilno delovno mizo in ustrezno dodatno opremo.

Leto izdelave: 2003, Stanje: pripravljen za uporabo (rabljen), Pomik X/Z: 210mm/610mm, pomik Y: +/-40mm, premer vrtenja nad prečnim suportom: 360mm, prehod vretena: 65mm, število orodnih mest: 12, držalo orodja: VDI30, hitrost vrtenja: 4000 obr/min, hitri pomik: 24m/min, sila podajanja: 5000Nm. Dimenzije stroja X/Y/Z: pribl. 4000mm/2500mm/2500mm, masa: pribl. 6000kg, krmiljenje: Siemens Sinumerik 810D, delovne ure: 4894h. Vključuje oljni hladilnik, zbiralnik delov, samostiskalno vpenjalno glavo Kitagawa BB08, napravo za vpenjanje s penastimi pušami, držala za stružne rezila in držala za vrtalne palice. Dokumentacija je na voljo. Ogled na lokaciji je možen. Knodpfxexuvn Do Ah Asf

Leto izdelave: 2005, Stanje: zelo dobro (rabljeno),

Leto izdelave: 1982, Stanje: rabljeno, Technical Details: Z-axis travel: 260 mm Maximum test force: 49 - 7355 N (test load) Test height: 260 mm Workpiece weight: max. 160 kg Throat depth: 200 mm Interface: RS 232 Input voltage: 230V / 50Hz Total power requirement: 200 VA Machine weight approx.: 250 kg (without base cabinet) Machine dimensions approx. (LxWxH): 0.7 x 0.6 x 1.8 m (with base cabinet) The hardness testing machine, equipped for depth measurement operation, is offered for sale including a base cabinet (Emco model for hardness testers). The device is suitable for the following test methods (manufacturer specifications): Metals: Brinell, Vickers, Rockwell Plastic testing according to DIN 53 456 Other materials: testing possible only after consultation with the manufacturer. Test loads: electronically controlled via microprocessor, strain gauge and DC motor, for M4R-075 = 49 to 7355 N Test table Ø 90 mm, height adjustable via hand wheel Knsdpfx Ahou N Avxo Asf Test table mount in accordance with DIN 51 225 = Ø 25 mm Operation and programming via control panel with graphic-capable, illuminated LC display Accessories: Additional test tables/plates as shown in the photos Incl.

Stanje: rabljeno, Leto izdelave: 2006, Swing diameter 500 mm Turning length 1300 mm Control system Fanuc 18i TB Spindle speed range - main spindle 0 - 3500 rpm Main spindle drive power 33 kW Max. torque 800 Nm Number of tool positions 12 axial / 12 direct positions Tool holder VDI 40 Max. power 8 kW Max. torque 35 Nm Speed range - driven tools 0 - 4000 rpm Knjdpfx Ahexrg Dwj Aef X-axis travel 318 mm Z-axis travel 1360 mm Y-axis travel -60 / +80 mm Tailstock quill taper MK 4 In our assessment, the machine is in good used condition and can be inspected under power by appointment. The machine includes: - Cooling unit for spindle head - Hollow clamping cylinder incl. draw tube - Emco interface for bar feeder / loader - Fanuc 18iTB control / Manual Guide dialog programming - Operator manuals - Coolant system integrated in chip conveyor with 3.5 bar coolant pump - Chuck air cleaning - Electrical cabinet air-conditioning unit - Hydraulic unit - Hinged belt chip conveyor, discharge height 1.15m - Documentation/MaxxTurn 95 machine manual (German) - CE Certificate Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Stanje: novo, Machine according to DIN 8605: precision lathe with increased accuracy. Centre distance: 700 mm Centre height: 170 mm Swing diameter over bed: Ø 340 mm Swing diameter over cross slide: Ø 190 mm Bed width: 260 mm Longitudinal slide travel: 600 mm Cross slide travel: 220 mm Top slide travel: 110 mm Cross slide length: 410 mm Cross slide width: 150 mm Saddle guide length: 380 mm Tool cross-section: 20x20 mm Distance from turning centre to top slide: 34 mm Top slide (compound rest) swivel range: 60/120° Main spindle: Spindle mount DIN 55029 (Camlock): S 5 Spindle bore: Ø 50 mm Internal taper according to DIN 7178: 1:22 Spindle diameter at front bearing: Ø 70 mm Max. chuck diameter: Ø 200 mm Max. faceplate diameter: Ø 200 mm Spindle speeds: 40-3000 rpm Speed control: stepless Mechanical speed ranges: 4 Main drive: Power at 40% duty cycle: 5.3 kW Max. nominal torque at main spindle: 640 Nm Feed: 20 (28) longitudinal feeds Z: 0.045-0.787 mm/rev 20 (28) cross feeds X: 0.023-0.406 mm/rev Threads: 20 (28) metric threads (standard): 0.4 - 7.0 mm 32 imperial threads (with optional gear set D3Z200): 56 - 4 TPI 28 module threads (with optional gear set D3Z200): 0.2 - 3.5 32 diametral pitch threads (with optional gear set D3Z200): 112 - 8 Tailstock: Quill diameter: Ø 50 mm Quill taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ± 13 mm Permissible workpiece weights: Between centres: 50 kg With tailstock support: 150 kg Additional basic equipment (standard accessories): Including machine stand and integrated 3-axis digital display, German, with colour display 1 longitudinal stop 1 dead centre, taper 1:22, DIN 7178 1 dead centre MT3 1 chuck key Kedpjdctnbofx Ah Aenf 1 wrench component 1 grease gun 3 hexagon bolts M16x60 - DIN 933 3 hexagon nuts M16-8 DIN 934 1 single tool holder 1 A13x17 wrench DIN 837 1 open-end spanner SW 19 1 open-end spanner SW 22 1 hex key SW 5 1 hex key SW 6 1 hex key SW 8 3 shear pins 1 E-box key 1 operating manual incl. spare parts list 1 electrical documentation 1 test certificate Packaging (for truck transport with pallet and plastic cover) Machine according to CE Note: Pictures may show special equipment and accessories!

Stanje: rabljeno, Leto izdelave: 1990, premer struženja nad prečnim suportom: 210 mm, izvrtina vretena: 31 mm, premer struženja: 320 mm, višina središča: 165 mm, The machine can be tested under power and is fully functional. Kedpfowpkd Sjx Ah Aenf Includes accessories. Collet equipment is included.

Stanje: dober (rabljeno), Leto izdelave: 2000, Swing diameter: 340 mm Turning length: 2000 mm Control: FAGOR 8055 Swing over bed: 550 mm Spindle bore: 108 mm Spindle speeds – stepless: 2500 rpm Drive power: 16.5 kW Quill stroke: 220 mm Quill diameter: 100 mm Total power requirement: 19 kW Knodpsvwgpbsfx Ah Aof Machine weight approx.: 4,300 kg Space requirement approx.: 4,300 x 1,600 x 1,800 mm This EMCO E 300x2000 cycle lathe is offered complete with all accessories. Description: - Coolant system - 1 open steady rest 20-145mm - 1 closed steady rest 15-185mm - 1 face plate - 1 three-jaw chuck - 1 wedge bar chuck D=400mm - Parat 4-position tool holder - Assorted tool holders

Stanje: rabljeno, Leto izdelave: 2013, proizvajalec krmilnikov: Siemens, model krmilnika: 840Dsl, Description: Main Spindle: Technology: Motor spindle Speed: 5,000 rpm Power (max.): 29 kW Torque (max.): 250 Nm Bar capacity: 65 mm Workpiece clamping: Collet chuck, Hainbuch Spanntop nova Kombi Axzug size 65 Kjdpfjw Tg Adsx Ah Aenf Counter Spindle: Technology: Motor spindle Speed: 7,000 rpm Power (max.): 22 kW Torque (max.): 130 Nm Workpiece clamping: 3-jaw chuck, SMW Autoblok KNCS-N-225-66 Part ejector: Pneumatic Travel in Z: 750 mm Tool Carrier I (X/Y/Z): Technology: 12-station turret Tool holder: VDI30 Driven tool capacity: 4,000 rpm, 6.7 kW, 25 Nm Travel in X/Y/Z: 270/100/750 mm Rapid traverse in X/Y/Z: 24/10/30 m/min Tool Carrier II (X/Z): Technology: 12-station turret Tool holder: VDI30 Driven tool capacity: 4,000 rpm, 6.7 kW, 25 Nm Travel in X/Z: 205/750 mm Rapid traverse in X/Z: 24/30 m/min Equipment/Accessories: Chip management: Chip conveyor Coolant management: High-pressure coolant pumps, 14 bar Raw material feeding: Short bar loader, EMCO LM 1200 Finished parts removal: Pneumatic workpiece pick-up unit with conveyor belt Oil mist extraction: Mechanical separator, manufacturer Absolent Tool holders: Various fixed and driven holders Additional equipment: Spindle cooling unit

Stanje: rabljeno, Leto izdelave: 2000, Technical Details: Swing diameter over bed: 600 mm Swing diameter over cross slide: 260 mm Turning length: 610 mm Cross travel (X-axis): 160 mm Longitudinal travel (Z-axis): 610 mm Control: Siemens 810D Spindle speed: 1 – 6300 rpm, stepless Kodpeu Ixwiofx Ah Aonf Spindle torque: 86 Nm Spindle bore: Ø 42 mm Spindle nose diameter in front bearing: Ø 80 mm Feed drive AC: X/Z: 5000 / 7000 N Rapid traverse X/Z: 16 / 20 m/min Tool turret – number of stations: 12 / VDI 30 Tailstock quill: ISO MK4 Tailstock quill travel: 500 mm stroke Main spindle power: 7.5 kW (100% duty: 11 kW) Electrical specification – voltage/frequency: 3/PE ~400V and 50/60Hz Total power consumption: 20 kVA (11 kW) Machine weight approx.: 4.0 t Machine dimensions approx. LxWxH: 3.0 x 2.0 x 2.1 m The CNC lathe features a C-axis. Distance main spindle – tailstock: 805 mm Hydraulic power chuck Röhm Ø 160 mm (without jaws), max. speed 7,500 rpm Tailstock with live center Tool turret (12 positions available for driven tools) Currently, 8 tool holders installed in the magazine, of which 4 pieces with collet chuck Coolant system, coolant supply via the tool turret Control cabinet with Rittal cooling unit type SK3393100 Workpiece collection tray Machine lighting Accessories: 1x driven tool In standard condition.

Stanje: dober (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 50 mm, premer struženja nad ležiščem sani: 340 mm, premer struženja nad zgornjim sanežem: 170 mm, višina središča: 170 mm, stružna dolžina: 700 mm, največja hitrost vretena: 2.350 obr/min, Emcomat 17 S Vretenova izvrtina: 50 mm Premer struženja nad posteljo: 340 mm Kodpexp Hudofx Ah Aenf Premer struženja nad suportom: 170 mm Razdalja med konicama: 700 mm Največ 2350 obr/min. Stružnica ima vzdolžni in prečni podajalnik. Digitalna dvoosna indikacija. Opremljena z zasilno zaustavitvijo in zaščito čeljustne plošče Leto izdelave: 2002 5,3 kW 400 V

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, EMCO Maximat Super 11 – Precision Lathe in Excellent Condition For sale is a used EMCO Maximat Super 11, a robust and precise universal lathe "Made in Austria." This machine is ideal for workshops, training facilities, or discerning hobbyists who value quality and accuracy. The machine is used but well-maintained and fully operational. All gears shift smoothly, the guideways are in good condition, and the machine has been regularly serviced. Technical specifications: • Centre height: 140 mm • Centre distance: 600 mm • Speed range: 55 – 2200 rpm (8 geared steps) • Tailstock: MT2 spindle • Toolholder: Quick-change toolpost • Lighting: Integrated LED work lamp • Weight: approx. 360 kg • Dimensions (L × H × W): approx. 1.3 m × 1.2 m × 0.6 m Condition & Accessories: • Machine runs quietly with low vibrations • Tailstock operates smoothly and can be adjusted precisely • Quick-change toolpost included • LED work lamp for optimal visibility • Various clamping devices or tools can be purchased additionally (by agreement) Price: The asking price is fair and negotiable. Open to serious offers. Other information: Knedpfx Ahsxqx Nvs Aof • Collection preferred, viewing possible by appointment • Machine can be demonstrated under power

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, obratovalne ure: 8.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: A8A R19 52, stružna dolžina: 225 mm, premer struženja nad prečnim suportom: 250 mm, premer struženja: 80 mm, moč vretenovega motorja: 4.400 W, hitrost vretena (min.): 300 obr/min, največja hitrost vretena: 6.300 obr/min, izvrtina vretena: 25 mm, potovalna razdalja osi X: 100 mm, pomik po osi Z: 300 mm, Premer palice (maks.): 25 mm, poteza s peresom: 50 mm, Oprema: dokumentacija / priročnik, Dodatne informacije: 12-postajna revolverska glava za VDI16 hitroizmenljive nosilce orodij, dvosmerna logika za gnana orodja. Knsdjxvb Thepfx Ah Aef

Stanje: zelo dobro (rabljeno), EMCO Model E 900 Control type: SIEMENS SINUMERIK 810 D Table dimensions: 1000 x 520 mm Linear guides: ✓ Travel X-axis: 900 mm Travel Y-axis: 500 mm Kedjpgng Hjpfx Ah Aenf Travel Z-axis: 500 mm Number of axes: 3 Spindle speed: 12,000 rpm Spindle taper: ISO 40 - DIN 69871 Tool magazine: 20 positions Coolant supply through the spindle: ✓ Spindle motor power: 13 kW Year: 2017 CE-certified machine: ✓ Overall dimensions: 2570 x 2445 x H 2920 mm Weight: 4300 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, HT 45 SM2Y / SIEMENS - with live tooling + Y-axis CNC turning center for complete machining of turned/milled parts with 2 spindles, 2 tool systems, 6 linear axes, and 2 rotary axes, integrated spindle motors on main and sub spindle (water-cooled), preloaded roller guides. Drive power: Main spindle - 15 kW Sub spindle - 15 kW Speed range: Main spindle: 0 – 7000 rpm Sub spindle: 0 – 7000 rpm Spindle connection (DIN 55026): Main spindle: KK 5 (max. bar capacity ø 45 mm) Sub spindle: KK 5 Y-axis: • Travel: +40 / -30 mm • Rapid traverse: 15 m/min Includes: • Hollow clamping cylinder on main spindle • Draw tube for main and sub spindle • Mechanical spindle brake (main/sub spindle) • Parts ejector and flushing through the sub spindle • Control: Sinumerik 840D-sl / OPERATE o SHOPTURN conversational programming o USB interface o Network drive / Ethernet o 15" color TFT monitor o 3D simulation o and much more • 2x 12-position VDI 25 tool turrets, radial, with directional logic for up to 2x 12 live tool stations! Swivel speed adjustable with feed switch! Performance data: o Max. 4 kW at 2080 rpm o Constant torque 16 Nm o Speed range 0–6000 rpm o C-axis for main and sub spindle o TRANSMIT software for simple C-axis programming • Chip conveyor, programmable discharge height 1100 mm (type "hinge belt") • Coolant system integrated in the chip conveyor 2 high-pressure pumps, 14 bar 2 flushing pumps, 3.7 bar • Hydraulic unit • Machine light • Documentation Includes: DE6400 1 pc Control language German Knjdpfjwvlvvex Ah Aof S3Z580 1 pc 22” Multi-touch operating unit HT45 X3Z160 1 pc Tool monitoring Siemens 840Dsl X3Z690 1 pc SHOPTURN/MILL expansion 840DSL/828D X3Z710 1 pc 4-AXIS turning/balance 840DSL/828 S3Z20S 1 pc Glass scale X1 Siemens S3Z21S 1 pc Glass scale Y1 Siemens S3Z23S 1 pc Glass scale X2 Siemens X1Z140 1 pc Loader interface A8, S2, S3, S4, S6, R2, R6, R9PM S30593 1 pc Surcharge for flat chip conveyor S3Z610 1 pc Tool measurement HT45 S4Z140 1 pc Coolant gun S3Z160 1 pc Cooling device HT45 S3Z010 1 pc Oil mist separator MT45/HT45/E45 S3Y300 1 pc Band filter 600L + conveyor HT45 S30605 1 pc Preparation HT45 sub spindle unloading S30595 1 pc Robot interface HT45 S30596 1 pc Interface to measuring station S30597 1 pc Interface to unloading unit S30598 1 pc Wireless probe Renishaw S30599 1 pc Tool setup by Emco 990717 1 pc Loading system IRCO ILS-RBL-8008 990718 1 pc Unloading system IRCO ILS-REX-8008 ... Year: 2018 Machine No: S3A182001

Stanje: rabljeno, Leto izdelave: 2008, Technical Details: Swing diameter over bed: 600 mm Swing diameter over cross slide: 540 mm Turning length: 550 mm Z-axis travel: 800 mm X-axis travel: 260 mm Control: Fanuc 18i-TB Spindle bore: Ø 73 mm Bar capacity: Ø 65 mm Spindle speed: 0 ... 5000 stepless rpm Spindle torque: max. 250 Nm Rapid traverse in X/Y/Z axes: X/Z: 30 m/min / Y: 12 m/min Rapid traverse speed C-axis: 1000 rpm Tool turret – number of stations: 12 (Sauter) Operating pressure: 6.0 bar Electrical specification – voltage/frequency: 3 x 400 V / 50-60 Hz Operating pressure: 6 bar Total power requirement: 40 kVA Machine weight approx.: 5.7 t Machine dimensions approx. LxWxH: 2.2 x 3.4 x 2.4 m Chip conveyor dimensions LxWxH: approx. 2.9 x 0.6 x 0.55 m (0.38 t) Chip tray dimensions LxWxH: approx. 1.6 x 1.3 x 0.25 m (0.2 t) Transport dimensions machine: approx. 3.3 x 1.9 x 2.2 m The machine features a C-AXIS, E-axis, Y-axis, and W-axis Driven tools can be used at all turret stations Distance spindle to sub-spindle = 1050 mm Sub-spindle: A2-6, travel 800 mm, spindle Ø 105 mm, torque 250 Nm Control cabinet equipped with Rittal cooler With hinge belt chip conveyor Ksdpfx Aovvtpxsh Aenf Chip tray Compressed air gun Machine is offered WITHOUT chuck as shown!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, EMCO Concept MILL 55 Year of manufacture: 2018 With tool changer PC-controlled 3-axis universal milling machine for basic CNC training with various industry controllers. The machine is fully enclosed, equipped with safety devices in accordance with CE standards, infinitely variable main drive, automatic referencing, machine light, electrical and mechanical preparation for automation, PC interface card, PC-to-machine connection cable, data carrier with machine data, operating tool set, and user manual with spare parts list. The Interchangeable Control System A unique feature is the concept of the interchangeable control system, with which all Concept series machines can be equipped. This enables training on all standard industrial CNC controls on a single machine. Currently, up to eight different controllers can be learned. The result: CNC technicians are highly flexible, which is a critical advantage both for skilled workers and the company. Work Area • Travel in X-axis: 190 mm • Travel in Y-axis: 140 mm • Travel in Z-axis: 260 mm • Min. distance spindle nose - table: 77 mm • Max. distance spindle nose - table: 337 mm Knedpfx Ahewkpzls Aef Milling Table • Table size (L x W): 420 x 125 mm • T-slots (number x width x distance): 2 x 11 x 90 mm • Max. table load: 10 kg Milling Spindle Drive • Speed range: 150 – 3,500 rpm • Power (three-phase asynchronous motor): 0.75 kW • Spindle torque: 3.7 Nm Axes • Feed rate: 0–2 m/min • Max. feed force X/Y: 800 N • Max. feed force Z: 1,000 N • Mean positional deviation per VDI 3441 X/Y: 0.008 mm • Mean positional deviation per VDI 3441 Z: 0.008 mm Tool System • Number of tool stations: 8 • Tool selection via directional logic • Max. tool diameter: 40 mm • Max. tool weight: 1 kg Scope of delivery Emco Concept Mill 55 with tool changer Cables Easy2Operate WinNC Sinumerik Operate Base stand Leveling elements I/O expansion Pneumatic expansion Automatic door Pneumatic vise Robotic interface DNC interface W-holder package

Stanje: rabljeno, Leto izdelave: 1990, Technical details: X travel: 185 mm Y travel: 95 mm Z travel: 200 mm Control: emco tronic TM02 Spindle mount: SK 30 Speed range: 10 - 4000 rpm, stepless Kjdevc Awrepfx Ah Asnf Feed rate stepless: 1 - 2000 mm/min Rapid traverse: approx. 3.0 m/min Tool turret - number of stations: 10 Interface: R 232 Table size: approx. 420 x 125 mm Total power requirement: 0.8 kW Machine dimensions (LxWxH): 2.1 x 0.9 x 2.0 m Control panel: EMCOTRONIC TM 02 Operating modes: Manual operation and/or automatic Coolant system (with supply to the milling spindle) Operation via control panel mounted on 3 swiveling wheels Pneumatic door guard

Stanje: novo, Leto izdelave: 2024, EMCO Concept MILL 105 PC-controlled CNC table-type machining centre Machine complete with full enclosure, safety devices in accordance with CE standards, 10-position tool turret, central lubrication system, machine lamp, electrical and mechanical preparation for automation, operating tool kit included. Year of manufacture: 2024 Knedpfx Ahjtz S Rhj Ajf

Stanje: rabljeno, Leto izdelave: 1995, Technical Details: X-travel: 600 mm Y-travel: 400 mm Z-travel: 400 mm Table size: 800 x 400 mm Speed range: 63 - 3150 / 18 steps rpm Infinitely variable feed: X/Y/Z: 8 - 800 / 8 steps mm/min Spindle taper: SK 4 Spindle head swivels left and right: 90° Quill stroke: 105 mm Total power requirement: 5.3 kW Machine weight approx.: 2,245 kg Machine dimensions LxWxH: 2.1 x 2.8 x 1.9 m Screen control replaced and upgraded to new LCD. The milling machine is equipped with a PROTOTRAK MX2 digital readout measuring system. The X and Y axes can run cycles (interpolation); the Z axis is moved manually. Spindle with clockwise/counterclockwise rotation Automatic tool clamping via control command Kodpsvbhcdjfx Ah Asnf Coolant device (without tank) Chip collection tray Tool accessories (as shown in the photo) *