Stroj za mehko struženje

EMCO HYPERTURN 665

Stanje: rabljeno, Leto izdelave: 2013, proizvajalec krmilnikov: Siemens, model krmilnika: 840Dsl, Description: Main Spindle: Technology: Motor spindle Speed: 5,000 rpm Power (max.): 29 kW Torque (max.): 250 Nm Bar capacity: 65 mm Workpiece clamping: Collet chuck, Hainbuch Spanntop nova Kombi Axzug size 65 Counter Spindle: Technology: Motor spindle Speed: 7,000 rpm Power (max.): 22 kW Torque (max.): 130 Nm Workpiece clamping: 3-jaw chuck, SMW Autoblok KNCS-N-225-66 Part ejector: Pneumatic Travel in Z: 750 mm Bljdpfxow Tg Adj Afned Tool Carrier I (X/Y/Z): Technology: 12-station turret Tool holder: VDI30 Driven tool capacity: 4,000 rpm, 6.7 kW, 25 Nm Travel in X/Y/Z: 270/100/750 mm Rapid traverse in X/Y/Z: 24/10/30 m/min Tool Carrier II (X/Z): Technology: 12-station turret Tool holder: VDI30 Driven tool capacity: 4,000 rpm, 6.7 kW, 25 Nm Travel in X/Z: 205/750 mm Rapid traverse in X/Z: 24/30 m/min Equipment/Accessories: Chip management: Chip conveyor Coolant management: High-pressure coolant pumps, 14 bar Raw material feeding: Short bar loader, EMCO LM 1200 Finished parts removal: Pneumatic workpiece pick-up unit with conveyor belt Oil mist extraction: Mechanical separator, manufacturer Absolent Tool holders: Various fixed and driven holders Additional equipment: Spindle cooling unit

Stanje: rabljeno, Leto izdelave: 2007, Pressure: 100 t Stroke: 500 mm Blsdpfx Ajvprv Rsfnsd Table surface: 900 x 600 mm Rapid traverse: 22 mm/s Stroke speed: 2 mm/s Ram surface: 700 x 350 mm Total power requirement: 2.2 kW Machine weight: approx. 1.6 t Required space: approx. 1.9 x 0.85 x 2.3 m Hydraulic workshop press This machine is the Italian make SICMI, which was distributed by Knuth.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Well-maintained EMCO Hyperturn 665 MC Plus for sale, equipped with IEMCA Master 880MP-E bar feeder, chip conveyor, and high-pressure coolant pumps! Machine was used exclusively for brass components! CNC Turning and Milling Center | EMCO - HYPERTURN 665 MC Plus with main/ sub-spindle, C + Y axis, 2 turrets each with 12 positions for live tooling! Technical data: Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Control: Siemens Sinumerik 840 D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar diameter: 65 mm Bljdjxzq Ncjpfx Afnsd Travel – X: 270 mm Travel – Z: 750 mm Travel – X2: 205 mm Travel – Z2: 750 mm Travel – Y: 100 (+/- 50) mm Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Tool turret: 2 x 12 positions, all live! Tool mounting: VDI 30 Upper turret: X, Z, Y axis Lower turret: X, Z axis Sub-spindle left/right movement: Z3 axis C11 spindle: 65 mm diameter (hollow clamping cylinder) C12 spindle: 45 mm diameter (solid clamping cylinder) with part ejector Tool turret type: Sauter 2 x 14 bar high-pressure pumps Accessories: - Complete tool cabinet with toolholders (live and static) as well as carbide inserts and toolholders - Collet chucks for main and sub-spindle - Complete documentation - and more Machine available immediately! Machine ready for operation immediately! Machine will be loaded by us! Transport can be organized upon request!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, obratovalne ure: 12.125 h, moč vretenovega motorja: 29.000 W, največja hitrost vretena: 5.000 obr/min, proizvajalec krmilnikov: SIEMENS, model krmilnika: SINUMERIK 840D, število osi: 6, This 6-axis EMCO Hyperturn 665MC Plus turning-milling center was manufactured in 2008. It features a multi-axis CNC system with a Y-axis and B-axis, enabling complete machining of turning and milling components. Equipped with integrated spindle motors on both the main and counter spindles, it offers a spindle speed of up to 5,000 rpm for the main spindle and 7,000 rpm for the counter spindle. The machine includes a 24-position tool magazine and is controlled via a SINUMERIK 840D system. If you are looking for high-quality turning and milling capabilities, consider the EMCO Hyperturn 665MC Plus, which we offer for sale. Please contact us for further information about this machine. Additional Equipment • Tool turret: 12-position radial VDI 30 tool turret with directional logic for up to 12 driven tool stations • B-PowerMill: Motorized milling spindle with a 24-pocket tool magazine, 210° swivel range • Optional tool package: Includes static and driven tool holders, collet holders, reduction sleeves, and actuating clamps • Hollow clamping cylinder with draw tube / part ejector and coolant flushing through the counter spindle / finished part catcher • Finished part collection device / coolant system integrated in the chip conveyor / high-pressure pump (14 bar) and fine filter • Flush pumps (3.7 bar) / electrical cabinet air conditioning / electrostatic oil mist separator • Hydraulic unit / machine lamp / foot switch interface / signal lamp • Documentation with electronic handwheel, PC keyboard, network readiness, tool monitoring, process window, cleaning pistol • Main spindle clamping system: Hainbuch BZI 80 pull-to-center Machine Advantages Technical Machine Benefits • Counter spindle: 22 kW / Counter spindle: 0–7,000 rpm • Main spindle: kk 6 (bar capacity 65 mm) / Counter spindle: kk 6 • Y-axis travel: +/- 50 mm • C-axis for main and counter spindle Blodpfex D Hwnox Afnjd • Counter spindle: 3-jaw chuck, 210 mm • Approx. 40 Capto C4 tool holders for milling spindle • Loader lm 1200 • The machine does not have ShopTurn programming. It must be programmed with ISO code, with simple cycles available for drilling, milling, swiveling, etc. • 12-station turret and a milling spindle

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, moč vretenovega motorja: 29.000 W, največja hitrost vretena: 5.000 obr/min, skupna masa: 620 kg, število osi: 6, This 6-axis EMCO Hyperturn 65 Powermill G2 was manufactured in 2022. This highly productive CNC turning-milling center features a main and counter spindle with a maximum torque of 250 Nm and speeds of up to 5,000 rpm. The milling spindle delivers up to 12,000 rpm. It is equipped with a 40-position tool magazine, a 12-position turret, and the modern Sinumerik ONE control system. If you are looking for high-quality turning and milling capabilities, consider the EMCO Hyperturn 65 Powermill G2 machine we have for sale. Contact us for further information. • Main spindle (direct drive): • Max. torque: 250 Nm • Counter spindle (direct drive): • Max. drive power: 29 kN (as supplied) • Max. torque: 250 Nm • Speed range: 0–5,000 rpm • Milling spindle (direct drive): • Max. drive power: 37 kW • Max. torque: 30 Nm • Speed range: 0–12,000 rpm • Tool turret (direct drive): • Max. drive power: 10 kW • Max. torque: 30 Nm • Speed range: 0–12,000 rpm • Kinematics and axes: • Upper cross-slide with turning/milling spindle as motor spindle; hydraulic clamping during turning operations • Y-axis travel: +/- 120 mm • B-axis with direct drive: +/- 120°, hydraulic clamping • Tool equipment: • Tool magazine with 40 stations, HSK-T63 • 12-station radial turret with direct drive, tool interface BMT55P • Spindles and clamping: • High-pressure cylinder with draw tube for the main spindle • Full clamping cylinder with partial hollow clamping 66 x 550 mm deep in the counter spindle • Programmable clamping pressure for main and counter spindle • External feed flushing at main and counter spindle • Mechanical holding brake on main and counter spindle • C-axis for main and counter spindle • Control and HMI: • SINUMERIK ONE / OPERATE, EMCONNECT app-based user interface • 22" multi-touch display • IPC with 240 GB • SHOPTURN dialog programming • 3D simulation and drawing Blsdpfxex D E Hbj Afnjd • Remainder material detection • Unlocking of external memory • CAD reader (DXF import) • TRANSMIT and TRACYL for programming the C-axis • USB interface, network drive (Ethernet) • PC keyboard incl. HMI hotkey • LED status indicator • Fluids and operating materials: • 2 cooling fluid lines at 25 bar • 2 rinsing pumps at 4.3 bar • Control cabinet air conditioning unit • Cooling system for spindle motors, milling spindle, B-axis torque motor and turret direct drive • Hydraulic unit • Machine light • 8 leveling elements • Feedback/measuring system: • Glass scales: X1 (incl. air supply), Y1, Z1, X2 (HT65-PM-G2 / 840D-sl) Additional equipment • Chip management and filtration: • Hinged belt chip conveyor, discharge height 1,200 mm • Belt filter system, 980 liters • Waste water pump • Control/monitoring options: • Electronic handwheel BAOD-SL (portable, magnetic holder for Siemens controls) • EMCO tool breakage and wear monitoring / B40D-SL • Wireless probe / HSK drill breakage monitoring BK-MICRO • 4-axis turning / balancing cut (SINUMERIK option) • Alternative end spindle speed (SINUMERIK option) • Turret as tailstock (SINUMERIK option) • Counter spindle as tailstock (SINUMERIK option) • Bar feeder (specs as supplied): • Bar length: 300–1,200 mm • Bar diameter: 10–104 mm • Material support area (front view): 800 x 1,250 mm • Material capacity: 12 bars with 65 mm diameter • Max. load capacity: 400 kg (max. 74 kg/bar) • Rectangular material: min.

Stanje: dober (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: R7 A-Q-2701, Rabljeni CNC stružnica Znamka: EMCO Model: Hyperturn 665 Leto izdelave: 2002 Krmiljenje: 840 D Bodpfox Tbcysx Afnjld S transportnim trakom za odrezke

Stanje: rabljeno, Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: R7A V09, izvrtina vretena: 65 mm, prehod palice: 65 mm, Prodamo dva obdelovalna centra CNC EMCO HYPERTURN 665, letnik 2005, skupaj s podajalcem palic. Stružnici z dvema revolverjema (oba imata gnana orodja) in nasprotnim vretenom. Izvrtina skozi vreteno fi65. Blsdpfx Afoyahilonsd Z res veliko dodatne opreme (glave, gnana orodja...). Stroja sta redno vzrževana in sta v dobrem stanju. Cena stroja s podajalcem FMB je 23.000€. Cena stroja s podajalcem Hydrobar je 20.000€. V primeru nakupa obeh je skupna cena 40.000€

Stanje: novo, Leto izdelave: 2023, Extraction capacity at nozzle* (filter unit): 2600 m³/h (free blowing) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz, 3Ph+PE Noise level*: 65 dB(A) Dimensions (L/W/H in mm): L 9755 / W 508 / H 545 Colour: RAL 7035 Weight: 90 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter configuration Special voltage or special colour available on request OPTIONAL: With pre-filter package Field of application: Extraction of oil mist, emulsion mist (for emulsions with higher oil content) and smoke, suitable for small to very large machine workspaces | Oil mist separator Your advantages with the ELBARON series: - 18 device variants available - Direct from the manufacturer - ISI-TRONIC (digital filter control) optional - Electronically controlled EC fan as standard - Adjustable speed and air flow - Available as simplex (single-stage) or duplex (two-stage) - Wide range of air flow capacities available - Adaptable to pollutant load and required air flow Bsdpfx Afsh Rdxnensld - Extensive range of installation and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining processes involving pure oil and for separating oil mist and smoke (oil mist separator). For many years, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already optionally digitalised and can, for example, be controlled via laptop. The ELBARON® range comprises 18 device variants and can be perfectly tailored in size and capacity to your specific application. ELBARON® units impress with long service life and absolute operational reliability. Our electrostatic filter cells are dimensioned to ensure, from an economic perspective, optimum filtration efficiencies, long service lives, and trouble-free operation.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, moč vretenovega motorja: 13.000 W, največja hitrost vretena: 6.300 obr/min, število osi: 2, This EMCO E45 turning and milling center was manufactured in 2019. It features a KK5 spindle with a bar capacity of 45 mm and a speed range of up to 6300 rpm. The VDI30 tool turret with 12 stations supports 6 driven tools, enhancing versatility. Equipped with the SINUMERIK 828D OPERATE control system for precise machining and a robust build, it includes a chip conveyor and high-pressure coolant system. Contact us for further details on this machine. Bljdpfx Afjyffgrsnjd • Connection: KK5 (DIN 55026) • Bar capacity: 45 mm • Drive power: 13 kW • Speed range: 0-6300 rpm • C-axis on the main spindle • Tool turret: 12-position VDI30, axial • Direction logic for up to 6 driven tools • Driven tools: max. 4 kW / max. 16 Nm • Driven tool speed: 0-5000 rpm Tailstock • Programmable, hydraulically actuated • Max. clamping force: 6000 N • Morse taper: MK4 • Hollow clamping cylinder incl. draw tube Control & Software • SINUMERIK 828D OPERATE • SHOPTURN conversational programming • USB interface • Network / Ethernet • 10.4" TFT color display • 3D simulation Media & Machine Features • Machine light • Coolant system incl. pump (3.5 bar) • Hydraulic unit • Chip conveyor interface • CE certificate • Documentation Tool measurement (E45) • Measuring arm mounted in the working area • Tool measuring on the turret • Short setup times / precise measurement / cost-efficient Workpiece clamping • 3-jaw chuck KK5 • Max. speed: 6300 rpm • Diameter: 20 mm • Soft + hard jaws Other (machine-related) • Water gun • Air to spindle • Oil/coolant separator • Automatic coolant monitoring • Electronic handwheel • Tool change guard • Hydraulic connections • Pneumatic connections • Machine packaging: pallet + roll-up cover Additional Equipment Bar loader / Magazine (SL1200 - as referenced) • Bar length: 850-1200 mm • Bar diameter: Ø 8-95 mm • Max. feed rate: 60 m/min • Bar change: approx. 3 s • Magazine change: approx. 15 s • Material support surface: 550 × 1210 mm • Material capacity: 10 × Ø 55 mm • Operator side: right • Power supply: 240 V DC/DC • Air supply: 6 bar • Dimensions: 1700 × 1250 × 1090-1380 mm • Weight: approx. 500 kg • Safety device: CE • High-speed function • Documentation Spindle extension (for bar loader use) • E45 / MT45 / HT45 → DM45 • For 45 mm spindle • Short bars up to 1100 mm • With reduction sleeves (3 pieces) • Required for use with SL1200 Chip conveyor • Hinged belt conveyor • Discharge height: 1200 mm High-pressure coolant system • 14 bar / 50 Hz • Additional high-pressure pump • For tools with internal coolant supply • Interface & software Robot interface • PROFI-NET interface • 24 V signals • Safety release • Automatic/manual mode switching Additional Components • PC keyboard USB (QWERTY) • Machine status LED: Green (automatic), Red (alarm), White (material handling) Installation and Mounting Material • 4× vibration dampers • 4× mounting brackets • 4× heavy-duty anchors Part catcher • Pneumatically operated • Max. part length: 120 mm • Max. diameter: 45 mm (51 mm) • Max. weight: 2 kg • Collection box / conveyor belt

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna masa: 80 kg, zunanji premer vpenjalne glave: 400 mm, izvrtina vretena: 140 mm, Four-jaw scroll chuck Very good condition, signs of use visible; see pictures Jaws: 4 jaw chuck → External clamping for larger diameters Suitable for use on lathe, machining center, and milling machine. Chuck mounting on milling machine or machining center table via mounting flange. Jaw adjustment via square key and scroll plate, concentric adjustment. RÖHM type Z 400. Jaw dimensions: Blodpfx Asvy Iukjfnsd Width: 34 mm Length: 110 mm Slot B: xx mm Slot D: xx mm Total weight: approx. 90 kg Delivery includes chuck key. Additional jaws available on request. Flange for milling table mounting available on request. Delivery: Shipping by freight carrier on transport pallet upon request.