Elmag nakup rabljenega (71)

Stanje: novo, ELMAG Universal Lathe PREMIUM CU 400 RD - Vario Center Distance 1000 mm incl. RÖHM Chuck Performance Data and Mounts: - Turning Ø 325–1,320 mm, without gap 440–1,500 mm - Swing over cross slide Ø 190–940 × 6,000 mm - Drive Motor: 2,200–22,000 W, 400 V, high torque - Chuck Mount: DIN 55027 - Tailstock Taper: MT 3 – MT 6 Standard Equipment: - RÖHM 3-jaw chuck - 5-piece quick-change tool post set - Halogen machine lamp - Emergency stop button / no-voltage release - Chuck guard with safety switch - Carriage with splash guard - Base frame / chip tray / splash guard - Tool set / operating manual / CE conformity PREMIUM CU Series Standards: - Heavy-duty cast iron machine bed, excellent vibration damping - Removable gap bridge - Prism guideways - Spindle hardened and precision ground, high concentric accuracy, adjustable precision bearings - Smooth running spindle and feed gearbox in oil bath - Gears made from hardened and ground chromium-nickel steel - Feed reverse switch - Covered, trapezoidal-threaded lead screw, hardened and ground - Carriage with locking nut - Precision-adjustable slideways - Solid tailstock with offset turning capability - Lathe accuracy in accordance with DIN standards Special Accessories: - SINO digital position display for 3 axes - 7-piece indexable turning tool set 25 × 25 mm - 7-piece indexable insert set 25 × 25 mm - 6-piece parting tool set incl. inserts - Machine feet Ø 160 mm, pack of 8 Upon request: - Travelling steady - Fixed steady - Fixed steady with ball bearing guide - Faceplate - 4-jaw independent chuck ADVANTAGES - Quick-shift elements on spindle and feed gearbox - Feed reversal - Removable safety guard - Gear selector - Halogen lamp - Coolant pump - Emergency stop - Rapid traverse motor for longitudinal slide TECHNICAL DATA Center distance 1000 mm Center height 200 mm Swing over bed 400 mm Swing over cross slide 235 mm Swing without gap 550 mm Bed width 320 mm Cross-slide travel 235 mm Top-slide travel 110 mm Max. tool cross-section 25×25 mm Chuck mount DIN 55027 No. 6 Spindle mount (main spindle) MT 6 mm Spindle bore 52 mm Speed range 1, stepless 18–98 rpm Speed range 2, stepless 48–265 rpm Speed range 3, stepless 3: 144–790 / 4: 385–2120 rpm Longitudinal feeds (80) 0.015–0.6 mm/rev Knodpfxet Hhbto Ah Dsc Cross feeds (80) 0.0075–0.3 mm/rev Metric thread pitches (40) 0.25–7.5 mm Metric module threads (40) 0.0625–1.875 mm Inch threads, TPI (40) 120–4 TPI Inch module threads, TPI (40) 480–16 TPI Tailstock taper MT 4 Tailstock barrel diameter 50 mm Tailstock travel 100 mm Motor power 7,500 W Power supply 400/50 V/Hz Total length 2,350 mm Total height 1,330 mm Weight 1,590 kg

Stanje: novo, Leto izdelave: 2024, Drilling capacity in steel (diameter): 35 mm Throat depth: 320 mm Drilling stroke: 150 mm Spindle taper: MT 4 Table size: 500 x 400 mm Spindle speeds: 75 – 3,010 rpm Quill feed range: 0.1 / 0.15 / 0.22 / 0.33 mm/rev Quill travel: 150 mm Operating voltage: 400 V Total power requirement: 1.8 kW Machine weight: approx. 275 kg Space requirement: approx. 0.70 x 1.00 x 1.95 m - Factory No.: 138050673 Knjdpfxewlvlas Ah Djc - Electromagnetic feed - Tapping device - Machine vice, 150 mm - Two T-slot bolts, 14 mm - 9-piece drill bit set 14.5 mm – 30 mm, MT2 / MT3 - Cutting oil spray

Stanje: zelo dobro (rabljeno), I am selling a 2-roller coating machine Superfici Elmag FVR. Working width: 1400 mm Very good condition. Fully operational. Available immediately. Knjdpfoiuc R Rjx Ah Doc

Leto izdelave: 2022, Stanje: dober (rabljeno), Screw Compressor Elmag / Mark MSM 4 D-270 AD 2000 with ES 4000 Basic, year of manufacture 2022, 127 operating hours, 7,489 standby switch-on hours, max. operating pressure 10 bar, effective delivery rate 516 l/min, equipped with refrigerant dryer, Kedpfx Aslfcl Ush Dsnc

Stanje: rabljeno, Leto izdelave: 2020, Compressor ELMAG ROTAIR, Performance: Delivery rate 1600 L/min, Pressure 8 bar, Air connection, Engine: HONDA GX 690, Petrol, Weight 220 kg. Vehicle may be stickered and/or marked with advertising. Our offer is generally without a new TÜV inspection. Should a new TÜV inspection be required, we will be happy to provide you with a quote from our partner workshops! Vehicle may be stickered and/or marked with advertising. Our general terms and conditions of delivery and payment apply. We are happy to prepare a financing or leasing offer for this item. Please contact us! Knedpfx Ahswm Ub No Dsc

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, Superfici UV lakas uzklāšanas iekārta Piedāvājam Superfici UV lakas uzklāšanas iekārtu, ražotu 2002. gadā, kas paredzēta 100% UV lakas uzklāšanai uz papīra un kartona. Šī rūpnieciskā aprīkojuma vienība ir optimizēta augstas kvalitātes virsmas apstrādei un piemērota vidēja un liela apjoma poligrāfijas uzņēmumiem. Galvenās specifikācijas: • Ražotājs: Superfici (Itālija) • Izgatavošanas gads: 2002 • Lakas veids: 100% UV laka (bez šķīdinātājiem, pilnībā polimerizēta ar UV lampām) • Lapu formāts: – Maksimālais: līdz B1 (apm. 1040 × 800 mm) – Minimālais: A3 (420 × 320 mm) • Ražošanas ātrums: līdz 10 000 loksnēm stundā • Saderība ar materiāliem: papīrs un kartons Knjdpfowmntlsx Ah Dec • Uzklāšanas sistēma: [rullīšu / plūsmas uzklāšana – lūdzu, precizējiet, ja zināms] • UV žāvēšana: integrēta UV lampu sistēma (oriģinālā) Komplektācijā ietilpst: • Pilns rezerves ruļļu komplekts • 2 papildu gumijas ruļļi • Pilns rezerves ruļļu komplekts • Tehniskā dokumentācija • Fotogrāfijas pēc pieprasījuma Stāvoklis: • Lietota, bet labā darba kārtībā • Regulāri apkalpota • Gatava tūlītējai ekspluatācijai Šī Superfici iekārta nodrošina uzticamus un precīzus UV lakas uzklāšanas rezultātus, lielisku spīduma vai matētu efektu, ātru sacietēšanu un augstu produktivitāti. Ideāli piemērota komerciālajai poligrāfijai, iepakojuma ražošanai un speciālās apdares darbiem. Cena un piegādes nosacījumi — pēc pieprasījuma. Lūdzu, sazinieties ar mums, lai saņemtu papildu informāciju, fotogrāfijas vai vienotos par apskates iespēju.

Stanje: novo, ELMAG Universal Milling Machine Model UFM 125 Unique ‘2 in 1’ Concept The swiveling head of the UFM 125 can be set at almost any angle and, in addition to conventional face and end milling tasks, enables the machining of fitting surfaces and slots in difficult spatial positions. For face milling of large workpiece surfaces, the machine can be quickly converted into a horizontal milling machine (horizontal spindle on the swiveling head) with just a few simple steps. Thanks to its high drive power of 2,200 watts, the machine is suitable for face milling cutter diameters up to 125 mm. The machine comes equipped with automatic cross table feed for the X and Y axes, as well as a rapid traverse on the Z axis for fast table positioning. 11 speed levels and 9 feed rates provide sufficient flexibility for optimizing cutting speed. Knodpfjt Ef Eyex Ah Doc Central lubrication of the guideways ensures quick readiness, and an integrated coolant system with tank in the machine base are particularly advantageous features. The UFM 125 is ideally suited for single-part and small series production. STANDARD EQUIPMENT - Digital position display - Collet set (4, 5, 6, 8, 10, 12, 14 and 16 mm) with collet chuck - Tool kit - Operating manual / CE documentation ADVANTAGES - Automatic feed X/Y/Z - Milling capacity Ø 125/40 mm - Machine envelope 1,120 x 260 x 500 mm - Spindle overhang 60–500 mm - Table travel 600x300 mm - Swiveling milling head ±180° - Simple conversion to horizontal milling - Drive motor 2,200 W - Wide speed range - Forward and reverse rotation - Milling spindles with precision bearings - Drawbar spindles for high safety - Spindle safety guard - Smooth-running, precise cross table with T-slots and coolant channel - Cross table with 9-step feeds for X and Y axis - Powered Z-axis table feed - Central lubrication - Integrated coolant system with return, tank in machine base - LED table illumination - With digital position display TECHNICAL DATA Face milling capacity: 125 mm End milling capacity: 40 mm Machine envelope: 1,120 x 260 x 500 mm Spindle taper (rotary spindle): ISO 40 Vertical speed range: 45 – 1660 rpm Number of vertical speed steps: 11 Horizontal speed range: 45 – 1660 rpm Coolant pump: 90 W Number of horizontal speed steps: 11 T-slots / width x spacing: 5 / 14 x 50 mm Spindle overhang: 60 – 500 mm Swivel range of milling head: ±180° Quill to table distance: 80 – 500 mm Horizontal spindle to table distance: 40 – 470 mm Milling table travel: 420 mm Milling table area: 1,120 x 260 mm Table travel X x Y: 600 x 300 mm Feed rates X/Y: 24 – 402 mm/min Feed settings X/Y: 9 Feed Z: 1,200 mm/min Motor output: 2,200 W Feed drive X/Y: 550 W Feed drive Z: 750 W Power supply: 400/50 V/Hz Length x width: 1,655 x 1,325 mm Height: 1,730 mm Weight: 1,480 kg

Stanje: novo, Leto izdelave: 2024, Drilling capacity in steel (diameter): 32 mm Throat depth: 245 mm Drilling stroke: 135 mm Spindle taper: MT 3 Table size: 410 x 380 mm Spindle speeds: 10 - 2,100 rpm Operating voltage: 400 V Total power requirement: 1.1 kW Machine weight: approx. 210 kg Space requirement: approx. 0.7 x 1.8 x 1.75 m - Tapping device Knsdpfx Ajwlvk Njh Djc - Machine vice 150 mm - 9-piece drill bit set 14.5 mm - 30 mm, MT 2 / MT 3 - Cutting oil spray

Leto izdelave: 2005, Stanje: zelo dobro (rabljeno), I am selling a combined tunnel for surface finishing, Superfici Elmag Combiline. Configuration: - 1-head roller application machine - Cleaning unit with extraction - 2-head UV drying tunnel - Cleaning unit with extraction Model: Combiline. Working width: 1500 mm Kjdpfsiuc R Hjx Ah Denc Year of manufacture: 2005 Operating hours: 4,600 hours Overall length: 5.30 m Overall width: 2.40 m Weight: 4,000 kg Available immediately Fully operational.

Stanje: rabljeno, Leto izdelave: 2021, Compressor ELMAG ROTAIR with HONDA engine GX 690, Output: Air delivery rate 1600 L/min, Pressure 8 bar, Air connection, Weight 230 kg. Vehicle may be fitted with advertising decals and/or inscriptions. Our offer is generally without new TÜV inspection. If a new TÜV inspection is required, we will be happy to provide you with an offer from our partner workshops! Vehicle may be fitted with advertising decals and/or inscriptions. Our general terms and conditions of delivery and payment apply. We are happy to provide a financing or leasing offer for this unit. Knedpfx Ahowm Ub Ae Dec Please contact us!

Stanje: novo, ELMAG WFM 210 Servodrive Tool Milling Machine Including 3-axis position display Ready for operation: includes oil fill, de-preserved (degreased), fully assembled and functional test performed. The milling machines of the Servodrive series combine precision and cost-effectiveness, exciting the heart of every metal technician. This top ergonomic combination convinces with easy handling, stepless speed control, and excellent value for money—ideal for workshops, training centers, and toolmaking. Knsdpstw Akrjfx Ah Dec Standard Equipment: - Digital position indicator - 4 long milling arbors (16, 22, 27, 32 mm) - 3 reducing sleeves MK 1, 2, 3 - Operating manual / CE ADVANTAGES: Automatic feed and rapid traverse X/Y/Z - Milling capacity Ø 125 / 40 mm - Ball screw on all axes X/Y/Z - Infinitely variable drives on all axes - Coolant tank integrated in cast base - Digital 3-axis position display - Horizontal and vertical milling table - LED table illumination - Vertical milling head swivels infinitely +/- 90° incl. degree scale - Includes adjustable quill - Integrated central lubrication - Digital speed display of the milling spindle - Rapid traverse on all 3 axes - Swiveling milling head +/- 45° - Swiveling control panel - Digital position indicator for maximum precision on all 3 axes - Milling spindle clockwise/anticlockwise rotation - Digital speed display - Potentiometer for infinitely variable feed adjustment - Tumbler switch for rapid traverse - Coolant pump on/off - Emergency stop button TECHNICAL DATA: Drilling capacity in steel: 50 mm Milling capacity, face mill: 125 mm Milling capacity, end mill: 40 mm Spindle mount (rotary spindle): ISO 40 Speed range: 40 - 2000 rpm Speed settings: stepless Quill stroke: 65 mm Milling table T-slots / width x distance: 5 / 14 x 63 mm Vertical table T-slots / width x distance: 3 / 14 x 63 mm Spindle overhang: 180 - 485 mm Milling head swivel range: ± 45° Quill to table distance: 50 - 450 mm Horizontal spindle to table distance: 145 - 545 mm Milling table surface: 750 x 320 mm Table travel X x Z: 405 x 305 mm Vertical table surface: 890 x 225 mm Feeds X/Y/Z: 10 - 1000 mm/min Feed rate settings X/Y/Z: stepless Motor power: 3700 W Torque X-axis: 7.7 Nm Torque Y-axis: 7.7 Nm Torque Z-axis: 1.7 Nm Power supply: 400/50 V/Hz Dimensions: 750 x 320 x 450 mm Length x width: 1500 x 1700 mm Height: 2000 mm Weight: 1450 kg

Stanje: novo, Leto izdelave: 2024, Swing over bed: 250 mm Swing over cross slide: 145 mm Turning length: 550 mm Centre height over bed: 125 mm Distance between centres: 550 mm Bed width: 135 mm Spindle bore: 26 mm Speed range – stepless: 50 – 2,000 rpm Drive power: 750 W Knedpfx Ahowlvk As Djc Three-jaw chuck diameter: 125 mm Tailstock quill taper: MT 2 Quill diameter: 30 mm Quill stroke: 70 mm Operating voltage: 230 V Machine weight approx.: 120 kg Space requirement approx.: 1.25 x 0.60 x 0.50 m Article No.: 88111 - Stepless speed adjustment - Digital speed display - Three-jaw chuck ø 125 mm - Centre sleeve MT 4 - Centre sleeve MT 2 - Emergency stop button / no-voltage release - Chuck guard with safety limit switch - Chip tray / splash guard - Toolbox / operating manual / CE

Stanje: rabljeno, Leto izdelave: 2021, Compressor ELMAG ROTAIR with HONDA engine GX 690, Output: Air delivery rate 1600 L/min, Pressure 8 bar, Air connection, Weight 230 kg. Vehicle may be fitted with advertising decals and/or inscriptions. Our offer is generally without new TÜV inspection. If a new TÜV inspection is required, we will be happy to provide you with an offer from our partner workshops! Vehicle may be fitted with advertising decals and/or inscriptions. Our general terms and conditions of delivery and payment apply. We are happy to provide a financing or leasing offer for this unit. Kjdpfx Aewm Uafjh Dsnc Please contact us!

Stanje: novo, ELMAG Drill Bit Grinding Machine DBG 832 W 8 - 32 mm DBG - 3 in 1 The DBG series drill bit grinding machine is used for grinding spiral drills made from HSS and carbide. The machine features grinding stations for sharpening the point angle, clearance angle, and for cross-point thinning. Special CBN or SDC diamond grinding wheels are used, depending on the drill material. SDC Coated Grinding Wheels: Metal-coated synthetic diamond wheels for sharpening carbide drills. CBN Coated Grinding Wheels: Deliver outstanding sharpening results at very high speeds without burning. The unique thermal conductivity of CBN (boron nitride crystals) dissipates friction heat into the wheel, preventing the cutting edge from hardening and greatly reducing spark generation. CBN has higher thermal stability than diamond and, due to lower wear, is perfectly suited for sharpening HSS tools. Optional Accessories: SDC grinding wheel for DBG 832 W, Order No. 61016 Collet chuck for Ø 31-32 mm for DBG 832 W Collet set (ER40), 2 pcs., Ø 31-32 mm for DBG 832 W Now included free with both models: Collet chuck and collet set ER 20 or ER 40 ADVANTAGES CBN grinding wheel for HSS Adjustable device for point angles from 95°-135° Clearance angle grinding function Cross-point thinning grinding function For drills: 8-32 mm 23 collets 8-30 mm TECHNICAL DATA Grinding range drill-Ø: 8 - 32 mm Grinding range point angle: 95 - 135° Speed: 4400 rpm Motor power: 0.25 kW Power supply: 230/50 V/Hz Knodpjt Hhg Nofx Ah Dec Length: 490 mm Width: 250 mm Height: 260 mm Weight: 27 kg

Stanje: novo, Cutting diameter: 260 mm Saw band length: 2455 mm Maximum cutting width: 260 x 200 mm Saw band dimensions: 2455 x 27 x 0.9 mm Cutting angle: 0 – 60° Drive power: 0.75 / 1.1 kW Cutting speed: 34 / 68 m/min Table height above floor: 900 mm Machine weight: approx. 220 kg Space requirement: approx. 1.45 x 0.72 x 1.05 m NEW MACHINE PRICE: €1,990.00 plus VAT Kedewc D Azjpfx Ah Dsnc - Automatic hydraulic feed with flow control valve - Quick-release vice - Quick-action angle clamp - Angle scale - Oil bath for continuous lubrication - Cooling system with electric pump - Precision bearing band wheels - Saw band tracking adjustment - Saw band tensioner with disc spring assembly - Safety end switch for saw band monitoring - Adjustable front saw band guide - Adjustable front/rear tension bearings - Chip brush - Auto-OFF shut-off function - Saw frame with tapered roller bearings - Sheet steel base with chip tray

Stanje: novo, ELMAG Metal Circular Saw MKS 315 RLSS-N – SUPER SET OFFER SUPER SET OFFER - MKS RLSS-N standard equipment - Universal or sheet steel base - Material stand for metal circular saws - High-quality HSS/DMo5 saw blade - Coolant concentrate 1:10, 5 liters Standard Equipment - MKS RLSS-N metal circular saw - Material support with roller - Bar clamp with material stop - WSS quick-action angle clamp with angle scale - Adjustable cutting depth stop - DSS double quick-action vice - Quick-locking lever - Adjustable vice jaw(s) - High-performance drive - Oil-bath lubricated gearbox for continuous operation - Cooling system with membrane pump - ERGO operating lever with return function - Safety hold-to-run switch on handle - Self-closing blade guard - Emergency stop/zero voltage release - Tools/operating manual/CE compliance ADVANTAGES High accuracy for series cutting – with bar clamp and material stop Fast mitre adjustment with a single lever – with quick-action angle clamp and angle scale 45-0-45° Flexible mitre adjustment – gearbox head and/or vice can be pivoted Precise cutting depth limitation – with adjustable depth stop Powerful – two-speed drive motor 40/80 rpm Smooth and durable operation – quality gearbox with oil-bath lubrication for continuous service Optimized cooling – coolant circulation system with membrane pump, dosing valve and return filter Compact – coolant tank integrated in the chip tray Stable cutting guidance – with ERGO operating lever Safe – self-closing blade guard, hold-to-run switch, emergency stop, zero-voltage release, CE compliant TECHNICAL DATA Round tube cutting range at 0°: max. 90 mm Round tube cutting range at 45° (right mitre): max. 80 mm Square tube cutting range at 0°: max. 80 mm Square tube cutting range at 45° (right mitre): max. 70 mm Rectangular tube cutting range at 0°: max. 115x70 mm Rectangular tube cutting range at 45° (right mitre): max. 70x70 mm Saw blade outer diameter: 315 mm Saw blade bore diameter: 32 mm Max. vice opening: 120 mm Cutting angles: 45-0-45° Kodpfjt Hkbpjx Ah Denc Speed levels 1 / 2: 40 / 80 rpm Motor power speed level 1 / 2: 1500 / 2200 W Mains connection: 400/50 V/Hz Infeed height for roller conveyors: 1030 mm Length: 1475 mm Width: 1000 mm Height: 1150 mm Weight: 150 kg

Stanje: novo, ELMAG Sandblasting Cabinet Model PAL-2N (incl. extraction cyclone + dust bag) ADVANTAGES: Max. workpiece size approx. 50 x 70 x 50 cm Cyclone separator for abrasive recovery Includes compressed air injector nozzle P/3 Equipped with high-durability tungsten carbide blast nozzle Safety foot pedal (start-stop) Extraction fan Dust filter bag P/3 injector Ø 3 mm: 600 l/min air consumption P/3 injector Ø 3.5 mm: 800 l/min air consumption P/3 injector Ø 4 mm: 1,200 l/min air consumption P/4 nozzle diameters: 6 / 8 / 10 mm Dust-tight cover with quick-release clamps, easy workpiece positioning TECHNICAL DATA Working pressure: 1.5 – 8 bar Air requirement for injector nozzle P/3 Ø 3 mm: 600 l/min Air requirement for injector nozzle P/3 Ø 3.5 mm: 800 l/min Air requirement for injector nozzle P/3 Ø 4 mm: 1,200 l/min Blast nozzles P/4 Ø: 6/8/10 mm Voltage/Frequency: 400/50 V/Hz Cabinet interior: 60x88x78 cm Dimensions: 1,150x980x1,900 mm Weight: 120 kg Knodpfx Ahst Ebq Eo Dsc

Stanje: novo, ELMAG Electric Pallet Truck EHW 1500 Our EHW 1500 electric pallet truck is a true all-rounder with a load capacity of 1,500 kg. Its low net weight and the rapid charging time of our Li-ion batteries allow for quick and effortless operation. The EHW 1500 is perfectly suited for use in your logistics and warehouse operations. It handles the transport of pallets, materials, and goods with ease, supporting the optimization of your material flow. Experience the future of effortless handling in your business with the EHW 1500 and take your efficiency to new heights! ADVANTAGES - Precise digital LCD display for battery charge status - Excellent maneuverability thanks to lateral support rollers for optimal cornering - Outstanding lightness and agility - Easily overcomes gradients of up to 4% when loaded and up to 16% when unloaded - Enjoy up to 8 hours of battery runtime - Charger included for convenient recharging - The 24V/20Ah Li-ion battery weighs just 4.4 kg - Effortless battery change with just one hand TECHNICAL DATA Load capacity 1,500 kg Fork width 540 mm Fork length 1,150 mm Minimum height 80 mm Maximum lift height 195 mm Travel speed loaded/unloaded 4.6 / 4.8 km/h Dimensions (LxWxH) 1,530 x 540 x 1,160 mm Weight 123 kg Knsdpfxot Hvzuo Ah Dsc

Stanje: novo, ELMAG stone cutting machine (incl. diamond blade) STM 600/350, 230 Volt STM 610/350 The impressive stone cutting machines warrant closer inspection due to their robustness, excellent handling, and not least, their outstanding price-performance ratio. They cut just about everything: tiles, exposed aggregate slabs, paving stones, marble and granite, bricks, clinker, artificial stone ... Ideal for construction companies, landscaping businesses, and slab layers/installers. ADVANTAGES - Lockable spring tensioner for return, mounted on two saddle bearings - Water pump S1 - Blade cooling with dosing valve - Powerful drive motor 2.2 kW / 230 V - Safety switch with undervoltage release - Long service life: steel running rollers on the rolling table run over water Knodpfxot Hvlgs Ah Dec - Precise: adjustable longitudinal stop, measuring scale - Unmatched cutting unit for very deep cuts using a reverse cut - Includes segmented diamond blade for universal use TECHNICAL DATA Cutting capacity depth/length: 105 / 600 mm Diamond blade diameter: 350 mm Diamond blade borehole: 25.4 mm Rated power: 2.2 kW Voltage/frequency: 230/50 V/Hz Dimensions (LxWxH): 1130 x 570 x 1600 mm Weight: 72 kg

Stanje: novo, ELMAG Stone Cutting Machine (incl. Diamond Blade) STM 900/350 K, 230 Volt With or without Mitre Table K Quality machines up to 110 mm cutting depth, ideal for natural stone and landscaping businesses, tilers, and stove fitters. Easily movable, lockable cutting unit with ergonomic handle, protective cover with coolant water connections and splash guard. Professional Stone Cutter With the STM series, ELMAG offers professionals a wide choice of flexible, high-quality stone cutting machines. In addition to standard straight cuts, these proven machines master heavy granite paving slabs and complex mitre cuts on stair treads or on precast concrete and stoneware elements. The tried-and-tested features and user aids of these particularly robust, fully galvanised stone cutting machines meet the expectations for a modern, reliable tool with a long service life. All models are available with or without a mitre table and can be supplied with either a 230 V single-phase motor or a 400 V three-phase motor. ADVANTAGES - Blade cooling with dosing valve - Corrosion protection: fully galvanised construction - Removable water tray - Continuously adjustable mitre table 0–45° - Powerful drive motor Ksdpfx Ahet Hvmks Donc - Safety switch with undervoltage release - Easy transport on plastic rollers, four carrying handles TECHNICAL DATA Cutting Capacity Depth/Length: 110 / 900 mm Angle: 0–45° Diamond Blade Diameter: 350 mm Diamond Blade Bore: 25.4 mm Rated Power: 2.2 kW Voltage/Frequency: 230/50 V/Hz Dimensions: 1350 x 780 x 1300 mm Weight: 97 kg

Stanje: novo, ELMAG Stone Band Saw STBS-500 STBS for Dry Cutting (Bricks, Aerated Concrete, Insulation Material) The stone band saws of the STBS series are specifically designed for use on construction sites. When used for dry cutting, they are suitable for precise processing of materials such as aerated concrete, bricks, lightweight clay blocks, expanded clay, and wood, but also for insulation boards like Styropor and Styrodur. ADVANTAGES • Extraction port for dust extraction available • Saw band tension easily and optimally adjustable with handwheel • Includes forklift pockets and lifting eye • Constant saw band tension and 440 mm running wheels for reduced risk of band breakage and precise cuts • Direct drive with geared motor on separate motor console • Automatic saw band shutdown at end of cut • Machine stops when doors are opened • Short band change times Kodpst Egfzefx Ah Djnc • Straight, mitre, and manual contour cuts possible • Precise blade guide, adjustable to stone height • Easy relocation thanks to transport wheels and transport bar TECHNICAL DATA Cutting height: 500 mm Cutting length: 660 mm Angle: 0 - 45° Saw band dimensions: 3850x27 mm Table size: 710x1060 mm Nominal power: 1.85 kW Power supply: 230/50 V/Hz Dimensions: 1050x900x1840 mm Weight: 203 kg