Univerzalna stružnica

ELMAG PREMIUM CU 400 RD - Vario

ELMAG Universal Lathe PREMIUM CU 400 RD - Vario
Center Distance 1000 mm
incl. RÖHM Chuck

Performance Data and Mounts:
- Turning Ø 325–1,320 mm, without gap 440–1,500 mm
- Swing over cross slide Ø 190–940 × 6,000 mm
- Drive Motor: 2,200–22,000 W, 400 V, high torque
- Chuck Mount: DIN 55027
- Tailstock Taper: MT 3 – MT 6

Standard Equipment:
- RÖHM 3-jaw chuck
- 5-piece quick-change tool post set
- Halogen machine lamp
- Emergency stop button / no-voltage release
- Chuck guard with safety switch
- Carriage with splash guard
- Base frame / chip tray / splash guard
- Tool set / operating manual / CE conformity

PREMIUM CU Series Standards:
- Heavy-duty cast iron machine bed, excellent vibration damping
- Removable gap bridge
- Prism guideways
- Spindle hardened and precision ground, high concentric accuracy, adjustable precision bearings
- Smooth running spindle and feed gearbox in oil bath
- Gears made from hardened and ground chromium-nickel steel
- Feed reverse switch
Iedpfx Ajt Hhbtoh Dsih
- Covered, trapezoidal-threaded lead screw, hardened and ground
- Carriage with locking nut
- Precision-adjustable slideways
- Solid tailstock with offset turning capability
- Lathe accuracy in accordance with DIN standards

Special Accessories:
- SINO digital position display for 3 axes
- 7-piece indexable turning tool set 25 × 25 mm
- 7-piece indexable insert set 25 × 25 mm
- 6-piece parting tool set incl. inserts
- Machine feet Ø 160 mm, pack of 8

Upon request:
- Travelling steady
- Fixed steady
- Fixed steady with ball bearing guide
- Faceplate
- 4-jaw independent chuck

ADVANTAGES
- Quick-shift elements on spindle and feed gearbox
- Feed reversal
- Removable safety guard
- Gear selector
- Halogen lamp
- Coolant pump
- Emergency stop
- Rapid traverse motor for longitudinal slide

TECHNICAL DATA
Center distance 1000 mm
Center height 200 mm
Swing over bed 400 mm
Swing over cross slide 235 mm
Swing without gap 550 mm
Bed width 320 mm
Cross-slide travel 235 mm
Top-slide travel 110 mm
Max. tool cross-section 25×25 mm
Chuck mount DIN 55027 No. 6
Spindle mount (main spindle) MT 6 mm
Spindle bore 52 mm
Speed range 1, stepless 18–98 rpm
Speed range 2, stepless 48–265 rpm
Speed range 3, stepless 3: 144–790 / 4: 385–2120 rpm
Longitudinal feeds (80) 0.015–0.6 mm/rev
Cross feeds (80) 0.0075–0.3 mm/rev
Metric thread pitches (40) 0.25–7.5 mm
Metric module threads (40) 0.0625–1.875 mm
Inch threads, TPI (40) 120–4 TPI
Inch module threads, TPI (40) 480–16 TPI
Tailstock taper MT 4
Tailstock barrel diameter 50 mm
Tailstock travel 100 mm
Motor power 7,500 W
Power supply 400/50 V/Hz
Total length 2,350 mm
Total height 1,330 mm
Weight 1,590 kg

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.