Stružnica-konvencionalno-elektronska
OPTIMUM OPTIturn TH 5620D

Name: OPTIMUM OPTIturn TH 5620D
Brand: OPTIMUM
Availability: InStock

Stanje

Novo

Lokacija

Niederlangen Nemčija

Stružnica-konvencionalno-elektronska OPTIMUM OPTIturn TH 5620D

Podatki o stroju

Oznaka stroja:: Stružnica-konvencionalno-elektronska

Proizvajalec:: OPTIMUM

Model:: OPTIturn TH 5620D

Stanje:: novo

Cena in lokacija

Lokacija:: 49779 Niederlangen

Pokliči

Podrobnosti ponudbe

ID oglasa:: A16848346

Referenčna številka:: 1125-2200008

Posodobitev:: nazadnje dne 08.10.2024

Opis

Swing diameter 560 mm
Turning length 1910 mm
Swing diameter over bed slide 355 mm
Swing diameter in bed bridge 790 mm
Centre height 280 mm
Turning length in bed bridge 170 mm
Spindle speeds 12 (25-1600) rpm
Tailstock taper MK 5
Quill stroke 180 mm
Quill diameter 75 mm
Spindle mount DIN ISO 702-2 No. 8
Spindle bore 80 mm
Spindle taper MK 7
Longitudinal feed 35 / 0.059 - 1.646 m/min
Face feed 35 / 0.020 - 0.573 m/min
Total power requirement 8.5 kW
Machine weight approx. 2,560 kg
Space requirement approx. 3450 x 1150 x 1650 mm
Item no. 3462170

Heavy-duty machine featuring high flexibility, precision,
and cost efficiency. Equipped with DPA 31 Plus digital position display
and quick-change tool post.

Description:
- Hardened and ground Z-axis guideways
- Guaranteed spindle nose run-out accuracy = 0.015 mm
- Spindle mount Camlock DIN ISO 702-2 No. 8
- Leadscrew cover
- Precisely machined carriage
- All guides adjustable via gib strips
- Forward/reverse operation on carriage, switchable via leadscrew
- Dual-channel safety electronics
- Central lubrication in the carriage
- Cross slide adjustment range ±90°
- Main spindle runs in oil bath
- Shafts and gears run in oil bath
- Gear wheels easy-running, hardened, ground, and mounted in 2 adjustable
precision tapered roller bearings
- Switches with life cycle calculation, tested according to EN ISO 13849
- Handwheels with adjustable fine scaling 0.04 / 0.02 mm
- Safety handwheels with disengagement function per EN 23125 on X and Z axes
- Gears and shafts hardened and ground, running in precision bearings in oil bath
- Clearly arranged selection levers for feed speed selection
- Enclosed rapid-change feed gearbox design
- Emergency stop slam switch, motor protection switch, lockable main switch
- Emergency stop device, foot-operated
- Tailstock for taper turning, adjustable ±10 mm
- Tailstock quill and handwheel with adjustable fine scaling 0.025 mm; quick,
easy, and tool-free adjustment using clamping lever
- Cable carrier for gentle cable and hose guidance
- Heavily ribbed prismatic bed, induction-hardened and precision-ground cast iron
- Coolant system with separate tank, fill level indicator, and oil separator; easy,
complete draining and cleaning per DIN
- Thread dial indicator scale adjustable

Scope of delivery:
- Fixed steady rest, max. passage Ø 165 mm
- Travelling steady rest, max. passage Ø 95 mm
- LED machine lamp
- TH 5615D-TH 5630D: Reducing sleeve MK 7/MK 5
- TH 5620V: Reducing sleeve Ø113 mm / MK 5
- Fixed centre MK 5
- Fixed and revolving centre MK 5
- Quick-change tool post 7-C
- Tool holder 32 x 150 type D for square tool bits
- Thread dial indicator
- Initial machine fill with quality oil
- Change gear set
- Operating tools

Special accessories included:
- OPTIMUM 3-jaw chuck, centric clamping, Ø315 mm, Camlock DIN ISO 702-2
Fedpjucgr Iofx Ahmeph
No. 8 (Item no. 3442768)

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.

Ponudnik

Registriran od: 2011

743 Oglasi na spletu

Pokliči

Pošlji povpraševanje

Telefon & Faks

+49 5939 ... oglasi

Faks:

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Stroj za upogibanje z vrtljivim kolesom Prod-Masz Abkantbank24 Biegemaschine Abkantbank 2,5m ->ZGR-2640/1.2

Koblenz

720 km

Stroj za upogibanje z vrtljivim kolesom
Prod-Masz Abkantbank24 BiegemaschineAbkantbank 2,5m ->ZGR-2640/1.2

2.400 €

Fiksna cena DDV ni mogoče izkazati

Pokliči

Stanje: novo, Leto izdelave: 2025, Are you looking for quality and expertise for your sheet metal working machine? Then we are the right partner at your side. Those who know us know that we are a reliable company :) PRESS BRAKE 2.64 m / 1.2 mm New machine. Warranty: 12 months. We deliver the goods with our own truck. CE Certificate Eccentric force distribution on both sides of the machine Working length: 2640 mm STEEL SHEET 1.2 mm 30% higher bending capacity for non-ferrous metals Bending beam: 24 mm Bending angle: 145 degrees Weight: 350 kg Cutting across the entire working length Upper beam liftable in three positions Maximum open width between the beams: 80 mm Rear support frame for sheet holding, angle stop, degree scale, gas pressure dampers Fpedpfx Ahjdad Adjmsh Front cutting stop for ensuring specified cutting width Payment: Cash on delivery Price: 2,400 Euro Delivery cost: 240 Euro Delivery time: every week Roller shear 0.8 mm available for an additional 350 Euro We look forward to hearing from you! Invoices will be issued either with 0% VAT as an intra-community delivery or plus 19% VAT.

Poglej podrobnosti

Mali oglas

Časnikarstvo zavora Ermak Microbend 1000x40

Birmingham

1.407 km

Časnikarstvo zavora
ErmakMicrobend 1000x40

Pokliči

Stanje: kot nova (razstavni stroj), Leto izdelave: 2020, številka stroja/vozila: 1000x40, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 40 t, skupna dolžina: 2.300 mm, skupna širina: 1.950 mm, skupna masa: 1.850 kg, delovna širina: 1.000 mm, delovno območje: 1.000 mm, Oprema: varnostna svetlobna zapora, Uporabljena, kot nova Ermaksan CNC upogibna stiskalnica (pressbrake), 1 meter x 40 ton, 3-osna, naprodaj Popolnoma opremljena z nadzorno enoto Cybelec Cybtouch 12 Leto izdelave: 2020 Fjdpfovy Ewiox Ahmeph Tehnične specifikacije: - Največja dolžina upogibanja: 1 meter / 1000 mm - Razdalja med stebri: 800 mm - Največja stiskalna sila: 40 ton - Hod prečke: 100 mm - Širina mize: 90 mm Dimenzije (približno): - Dolžina: 2300 mm - Širina: 1950 mm - Višina: 1860 mm - Teža: 1850 kg Stroj je vključno s spodnjim multi-V orodjem in segmentiranim zgornjim orodjem.

Poglej podrobnosti

Mali oglas

Wetzlar

689 km

Center stružnica
CONTURSJ-470/1000 S

Pokliči

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 280 mm, izvrtina vretena: 58 mm, premer struženja nad ležiščem sani: 470 mm, višina središča: 235 mm, stružna dolžina: 1.000 mm, poteza s peresom: 127 mm, premer tulec: 68 mm, skupna dolžina: 2.150 mm, skupna širina: 810 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 20 obr/min, širina postelje: 300 mm, skupna masa: 1.800 kg, nosilec puše: MK 4, Centre height: 235 mm Centre distance: 1000 mm Spindle bore: 58 mm Spindle nose according to DIN 55029: Camlock D6 Fedpfocirnisx Ahmjph Motor power: 5.5 kW Spindle speed range: 20–2000 rpm Equipment includes, among others: Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surfaces) of the carriage and cross slide Manual central lubrication with a pump for the longitudinal and cross slides Complete coolant system with rear splash guard and carriage splash protection Chuck guard Control rod with 3 adjustable cams Machine lamp Fixed centre Set of machine mounting plates

Poglej podrobnosti

Mali oglas

Stružnica - konvencionalna WEILER DA 260 x 1500

OIching

360 km

Stružnica - konvencionalna
WEILERDA 260 x 1500

Pokliči

Stanje: rabljeno, Leto izdelave: 2024, proizvajalec krmilnikov: Heidenhain, model krmilnika: ND 7013, Description: Technical Data Centre Height: 260 mm Swing Diameter over Bed: 535 mm Swing Diameter over Cross Slide: 345 mm Distance Between Centres: 1,500 mm Fsdpeyu Iliefx Ahmjph Spindle Nose: DIN 55027/DIN ISO 702-3 size 6 Spindle Bore: 71 mm Spindle Diameter at Front Bearing: 100 mm Drive Power: 7.5 kW Speed Range: 33 – 1,500 rpm Metric Threads: 0.5 – 28 mm Quill Diameter: 65 mm Quill Travel: 120 mm Internal Taper: DIN 228 MK 4 Standard Equipment: - Way cover for leadscrew and feed shaft - Chip guard rear panel - Chuck guard with safety interlock - Chip deflector - Longitudinal stop with micrometer adjustment - Change gear door with safety interlock - Main drive braking system - Start-up clutch - LED machine lamp in chip guard rear panel - Quick-change tool post Multi Suisse size B - Incl. 1 quick-change holder BD 25120 - Coolant unit incl. coolant pump 30 l/min at 0.2 bar - Taper adapter sleeve MK5 for main spindle - Fixed centre MK5 - Central lubrication system - Tropical insulation up to max. 45° air temperature and max. 80% relative humidity - Oil gun - Set of service tools - Documentation Optional Equipment: - Set of mounting plates, 8 pieces - Digital position display mounted on arm over headstock - Packaging

Poglej podrobnosti

Mali oglas

Italija

653 km

HAAS VF-4SS
HAASVF-4SS

Pokliči

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, potovalna razdalja osi X: 1.270 mm, pomik osi Y: 508 mm, pomik po osi Z: 635 mm, največja hitrost vretena: 12.000 obr/min, moč vretenovega motorja: 22.400 W, število osi: 3, This 3-axis vertical machining center, the HAAS VF-4SS, was manufactured in 2008. It offers a travel range of 1270 × 508 × 635 mm, 22.4 kW spindle power, and a maximum spindle speed of 12,000 rpm. The machine is equipped with a tool changer featuring 40 + 1 positions and a high-speed machining package. If you are looking for a high-quality milling machine, consider the HAAS VF-4SS that we are offering for sale. Contact us for further information. • Spindle-to-table distance: 102 mm • Tool holder taper: CT40 (DIN 69871) • Max. cutting feed rate: 20.5 m/min • Rapid traverse (X/Y/Z): 35.6 m/min • Tool changer type: Random vertical • Tool magazine capacity: 40 + 1 positions • Data interface: USB • Options/features: • Through-spindle coolant system (21 bar) • 4th axis drive and wiring (prepared for 4th axis) • Intuitive programming system • Dual spindle orientation • Coordinate rotation system • Macro variables and scaling functions • High-speed machining package Fpsdpfx Aox D Irmohmjh Additional equipment: • Auger-type chip conveyor • Additional high-pressure filtration system

Poglej podrobnosti

Mali oglas

Mudersbach

735 km

Stružnica
BernardoTitan 660 x 2000

27.890 €

VB plus DDV

Pokliči

Stanje: novo, Bernardo Universal Lathe Titan 660 x 2000 Technical Specifications Centre distance: 2,000 mm Centre height: 330 mm Swing diameter over bed: 660 mm Swing diameter over gap: 900 mm Swing diameter over cross slide: 460 mm Bed width: 400 mm Spindle bore: 105 mm Spindle mount: DIN 55029, D1-8 Speed range (16): 25 – 1,600 rpm Longitudinal feed range (25): 0.044 – 1.48 mm/rev Cross feed range (25): 0.022 – 0.740 mm/rev Metric threads (54): 0.45 – 120 mm Inch threads (54): 7/16 – 80 TPI Quill diameter: 90 mm Quill travel: 235 mm Quill taper: MT 5 Motor power: 7.5 kW (10.0 HP) Machine dimensions (W x D x H): 3,630 x 1,200 x 1,520 mm Weight: approx. 2,900 kg Features Versatile applications in general engineering, production, single-part manufacturing, etc. Central, easy-to-use control for feeds and threads using leadscrew and feed shaft Prism bed made of cast iron, induction-hardened and precision-ground Modern main spindle bearing with precision angular contact roller bearings Hardened and ground gears and shafts, including in the feed gearbox Rapid traverse for longitudinal and cross feeds as standard to reduce idle times Large spindle bore (105 mm) for workpieces with large diameters Smooth start via mechanical multi-disc clutch Electromechanical foot brake for reduced idle times Excellent cutting performance even for facing operations The machine bed is reinforced with sturdy ribs to increase rigidity and minimize vibration influences Scope of delivery 3-axis digital readout ES-12 V with LCD display Slip clutch Rapid traverse longitudinal and cross LED machine light 3-jaw steel chuck PO3-315 mm / D8 Faceplate 450 mm Fixed steady rest – max. dia. 180 mm Travelling steady rest – max. dia. 120 mm 2 centre points Motor with magnetic brake according to CE standards Foot pedal with brake function according to CE Fpjdpfxefbbx Rs Ahmoh Initial fill with Shell Tellus 46 Coolant system Quick-change tool post with 4 holders Protection device for quick-change tool post Change gears Reducing sleeve Chip guard Cable routing via energy chain Operating tools

Poglej podrobnosti

Mali oglas

Klopi vrtalni stroj MAXION UNIMAX 1 Frequenz

Mindelheim

400 km

Klopi vrtalni stroj
MAXIONUNIMAX 1 Frequenz

Pokliči

Stanje: novo, Precise, smooth-running standard drill press offering high accuracy and quality. The drill table is adjustable via rack and pinion and can be swivelled around the column. Features full motor protection and star handle. Power supply: 230 V. Continuous drilling capacity in St 60: 15 mm Standard drilling capacity: 18 mm Infinitely variable spindle speeds: 200 - 4,000 rpm Spindle: MT 2 Drilling depth: 80 mm Throat depth: 180 mm Distance spindle/table: up to 380 mm Table surface: 250 x 220 mm Column diameter: 65 mm Overall height: 910 mm Weight: 80 kg Fpedpfx Ajda Nqxshmsh Three-phase motor with frequency converter: 1.1 kW Features: - Reversing switch for clockwise/counterclockwise rotation, suitable for thread cutting - Full motor protection - Star handle In stock, available immediately.

Poglej podrobnosti

Mali oglas

Vijačni kompresor Atlas Copco GA 18 VSD ff

Mühlhausen/Thüringen

651 km

Vijačni kompresor
Atlas CopcoGA 18 VSD ff

5.000 €

VB plus DDV

Pokliči

Stanje: dober (rabljeno), Leto izdelave: 2010, obratovalne ure: 100.000 h, tlak (min.): 10 letvica, tlak (maks.): 10 letvica, vrsta hlajenja: voda, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, hladilni sušilnik, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, soundproofed, built-in refrigeration dryer (WorkPlace Air System™). Technical Data Reference Conditions: Intake pressure 1 bar Intake temperature 20 °C Relative humidity 0% Usable volumetric flow at the outlet of the compact unit at operating overpressure 9.75 bar: 49.4 l/s (2.96 m³/min) according to ISO 1217-3, C Nominal motor power: 18 kW Nominal motor speed: 4,867 rpm Shaft power requirement at maximum operating overpressure: 24 kW Fsdpfju Rptyex Ahmsph Shaft power requirement at idle: 5.6 kW Compressed air temperature after dryer: 23 °C Cooling air volume: 0.23 m³/s Oil capacity: 12.2 l Residual oil content under reference conditions

Poglej podrobnosti

Mali oglas

CNC rezkalni stroj Bridgeport Interact 4

Soerendonk

897 km

CNC rezkalni stroj
BridgeportInteract 4

2.000 €

Fiksna cena plus DDV

Pokliči

Stanje: dober (rabljeno), potovalna razdalja osi X: 745 mm, pomik osi Y: 370 mm, pomik po osi Z: 300 mm, Bridgeport milling machine Model: Interact 4 Control: Heidenhain TNC 155 X travel: 745 mm Y travel: 370 mm Z travel: 300 mm Fodpfjqgcdtsx Ahmeph Table: 960 x 380 mm Spindle: ISO 40 Dimensions: 185 x 180 x 235 cm (LxWxH)

Poglej podrobnosti

Mali oglas

CNC vrtalna delovna miza 2000 x 1800 x 16 T UNION Ti 1800

Babberich

908 km

CNC vrtalna delovna miza 2000 x 1800 x 16 T
UNIONTi 1800

Pokliči

Leto izdelave: 1998, stanje: dober (rabljeno), Manufacturer: UNION Model: Ti 1800 Year of manufacture: 1998 Specifications Metric US Standard Table length: 2000 mm Table width: 1800 mm Table load capacity: 16000 kg V-axis feed: 1250 mm B-axis rotation: 360.000° B-axis rotational speed: 1.35 rpm V-axis traverse speed: 4000 mm/min. Dimensions (approximate): Length: 3400 mm Width: 2000 mm Height: 920 mm Weight: 6500 kg Fedpfxskwcdbe Ahmsph Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is supplied in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or terms of contract. We recommend verifying all critical details.

Poglej podrobnosti

Oglašujte tukaj