Eisele Lms 1 nakup rabljenega (98)

Stanje: rabljeno, Leto izdelave: 2011, Hidropnevmatsko delovanje Višina profila: 200 mm pod pritisnim elementom Maks. višina izseka: 150 mm Višina naslona: 150 mm Dsdpjynalusfx Afnjcd Teža: pribl. 400 kg

Stanje: dober (rabljeno), Leto izdelave: 1978, 1 x krožna žaga Eisele VMS II Leto izdelave: 1978 z napravo za hlajenje. v dobrem stanju. Dodpfeyluqgox Afnscd Tehnični podatki: Hitrosti rezanja: 40/80 o/min Največji premer žaginega lista: 300 mm Območje reza pri 90°: 160 x 80 mm Območje reza pri 45°: 120 x 80 mm Stroj si lahko ogledate pod elektriko.

Stanje: rabljeno, težka žaga z robustnim podnožjem in vpenjalom materiala za barvne kovine in aluminij. Močnejši motor. Djdpfx Afsykt Axjnocd

Stanje: zelo dobro (rabljeno), Leto izdelave: 1966, I am selling a German-made circular saw, Eisele brand, model VMS II, in good condition. Dcedpfevbwfnex Afnsd

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Fully hydraulic circular saw automatic machine, manufacturer: TRENNJAEGER Technical data: Saw motor, pole-changeable: 1.5 / 2.0 kW Saw blade: 275 mm 6 cutting speeds: 16, 20, 25 m/min + 32, 40, 50 m/min - Integrated hydraulics - Protective housing with limit switch interlock - 6 saw speeds Djdpfxoyilm Rs Afnecd

Stanje: dober (rabljeno), Leto izdelave: 1996, CUTTING RANGE ..... MIN 10MM TO 75MM Dcjdpfx Aequuufefnod CUTTING LENGTH ..... 5-900 SINGLE STROKE -9999 REVERSE OPERATION CUTTING SPEED ..... 0 - 40 MM/S, INFINITELY VARIABLE, REVERSE 135MM/S MATERIAL FEED SPEED ..... MAX. 350 MM/S CLAMPING FORCE ..... MAIN CLAMP 10500N

Stanje: rabljeno, Technical Details: Saw Blade Diameter: 400 mm Cutting Diameter: 140 mm Saw Blade Bore: 50 mm Saw Blade Speeds: 6 / 12 / 24 / 48 rpm Cutting Capacity at 90° (round): Ø 140 mm Cutting Capacity at 90° (square): 130 x 130 mm Cutting Capacity at 90° (flat): 370 x 30 / 315 x 70 / 265 x 95 mm Table Size: Ø 700 mm Table Rotatable: 360 degrees Clamping Pressure: 8 - 30 bar Electrical Specification - Voltage/Frequency: 400 / 50 V/Hz Compressed Air Connection: 6 - 8 bar Total Power Requirement: 3.6 kW Approx. Machine Weight: 1,170 kg Machine Dimensions: D: 1.5 x W: 1.0 x H: 2.35 m CIRCULAR SAW SEMI-AUTOMATIC - PROFILE CIRCULAR SAW MACHINE - UNDERFLOOR SAW For cutting materials: solid steel, tubes, and profiles within the specified cutting range. Cutting speed depends on the material/workpiece to be processed. Mitre cuts from 30° to 90° Dcsdpfxou Niuzo Afned Operation via control panel and two-hand operation Material clamping (opening width) adjustable with return stroke Saw blade feed rate adjustable Supplied without coolant system

Stanje: dober (rabljeno), Leto izdelave: 1989, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 8138, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, ❇️ Pressta Eisele AKF – Corner Notching Machine / Notcher | Very Good Condition | Fully Operational | UVV Safety Inspected For sale is a robust Pressta Eisele AKF corner notching machine for metal and window fabrication. The machine is overall in very good, well-maintained, and fully functional condition and has been in recent use. A valid UVV/safety inspection is present (see sticker/photos). ⚠️ Important Note: The pneumatic hoses on this machine show age-related material fatigue. ➡️ Recommendation: Replace the pneumatic hoses before commissioning (minimal effort required). Inspection and function test on site are possible at any time. ⸻ ❇️ Machine Details • Manufacturer: Pressta Eisele • Model: AKF • Machine No.: 8138 • Year of Manufacture: 1989 • Made in W.-Germany • Application: Notching of profiles in metal and window construction ⸻ ❇️ Features & Specifications • Heavy, low-vibration machine body • High-performance motor • Pneumatic feed and clamping functions • Stable worktable with various clamping options • Safety guards installed • Foot pedal operation • Maintenance-friendly design ⸻ ❇️ Condition • Mechanics and electrics: fully operational • Well-maintained overall condition • Note: pneumatic hoses require replacement due to age (see above) ⸻ ❇️ Dimensions • External dimensions (approx.): H 137 cm × W 99 cm × D 97 cm ⸻ ❇️ Terms & Conditions • Sale on behalf of a customer • Invoice with shown VAT possible • Location: 72229 Rohrdorf • Loading by overhead crane available on site • Delivery possible upon reimbursement of costs ⸻ ❇️ Price • Net price: 1,200 EUR plus 19% VAT ⸻ If interested, please get in touch – inspection and test run available by appointment. ⸻ Dodpex Rpfqefx Afnjcd ⚠️ I.offer additional machines and accessories for window, metal, and workshop operations in my other listings. ‼️ Please also have a look at my other offers – it’s worth it!

Stanje: dober (rabljeno), Leto izdelave: 1980, Funkcionalnost: popolnoma funkcionalen, Type: VMS III - PV Machine No.: 8518 Year of manufacture: 1980 Dsdpfxjyhq S Sj Afnecd Technical Data: Saw motor, 2-stage: 2.0 / 2.6 kW Saw blade: 350 mm 4 cutting speeds: 8.5 / 17 / 34 / 68 rpm Clamping range, flat / round: 200 / 120 mm Feed length, single stroke: 5 - 600 mm Feed length, double stroke: 1200 mm

Stanje: rabljeno, Leto izdelave: 2004, Premer rezila 450 mm Premer reza 150 mm Število obratov 6 / 12 / 24 / 48 vrt/min Območje reza pri 90 stopinjah: ploščato 240 x 70 mm Območje reza pri 60 stopinjah: ploščato 170 x 70 mm Območje reza pri 30 stopinjah: ploščato 120 x 70 mm Območje reza pri 90 stopinjah: okroglo 150 mm Območje reza pri 60 stopinjah: okroglo 145 mm Območje reza pri 30 stopinjah: okroglo 120 mm Območje reza pri 90 stopinjah: kvadratno 140 x 140 mm Območje reza pri 60 stopinjah: kvadratno 125 x 125 mm Območje reza pri 30 stopinjah: kvadratno 100 x 100 mm Skupna potrebna moč 3,6 kW Teža stroja pribl. 1150 kg Dcjdpfx Asyk E U Hofnod Dimenzije 1450 x 1610 x 1900 mm Polavtomatska zajeralna krožna žaga Oprema: - Nastavitev kota 30° / 60° / 90° - Digitalni prikazovalnik - Valjčna proga - Hidravlično vpenjanje - Hidravlični pomik rezila

Stanje: rabljeno, Leto izdelave: 1984, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0278, Mitre Cold Circular Saw EISELE Type VMS-III-S-HYD Type No.: 430 Machine No.: 0278 Year of manufacture: 1984 Cutting range at 90° (Round): Ø 120 mm Cutting range at 90° (Flat): 150 x 110 mm Cutting range at 45° (Round): Ø 100 mm Cutting range at 45° (Flat): 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 8, 16, 33, 66 rpm (2 gearbox stages + 2 motor speeds) Mitre cuts: 45° to the left, 90°, and continuously adjustable up to 30° (60°) to the right Motor power: 2 and 2.6 kW Electrical connection: 380 Volt, 50 Hz Features: - Semi-automatic vertical cold circular saw - Hydraulic quick-clamping device for material - Infinitely adjustable hydraulic saw blade feed - Convenient mitre adjustment with fixed stops - Saw carriage guided on very robust rectangular guideways - Comfortable and stepless height adjustment of the saw unit via clamping lever - Generously dimensioned gearbox - With Eisele rotation compensation for long blade life - Easy blade change - High productivity with minimal footprint (less than 1 m²) - Coolant system integrated in machine base - Centralized lubrication (manual) Space requirement: 1100 x 710 x 1900 mm (L x W x H) Weight: 490 kg The machine can be tested or demonstrated under power at our premises. All information without guarantee. Subject to prior sale. The item is sold without any warranty. The exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of obligations by the seller or for injury to life, body, or health. Dsdpfet A Arljx Afnecd

Stanje: dober (rabljeno), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0783, Mitre Cold Circular Saw EISELE Model: VMS-III-S-PV Type No.: 430 Machine No.: 0783 Year of manufacture: 1986 Cutting capacity at 90° (round): Ø 120 mm Cutting capacity at 90° (flat): 150 x 110 mm Cutting capacity at 45° (round): Ø 100 mm Cutting capacity at 45° (flat): 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 17 & 34 rpm Mitre cuts: 45° to the left, 90°, and continuously adjustable up to 30° (60°) to the right Motor power: 2 and 2.6 kW Power supply: 380 Volt, 50 Hz Equipment/features: - Semi-automatic vertical cold circular saw - Pneumatic quick-acting material clamping device - Infinitely variable pneumatic saw blade feed - Convenient mitre adjustment with fixed stops - Saw carriage on a highly stable rectangular guide - User-friendly and stepless lifting adjustment of the sawing unit via clamping lever - Generously dimensioned gearbox Dsdpfx Afet A Ar Ssnjcd - Equipped with Eisele rotation compensation for extended saw blade lifetime - Easy saw blade changeover - High productivity while requiring minimal floor space (less than 1 m²) - Coolant system integrated in the machine base Space requirement: 1100 x 710 x 1900 mm (L x W x H) Weight: 460 kg The machine can be tested/inspected under power on site by arrangement. All specifications are subject to change. Prior sale reserved. The item is sold under exclusion of any warranty. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of duty by the seller, as well as for injury to life, body, or health.

Leto izdelave: 2023, stanje: pripravljen za uporabo (rabljen), An aluminium mitre saw Eisele, including a mobile extraction unit from AS Sägetechnik, is available. 1) Mitre saw Pressta Eisele GS 600, year of manufacture: 2023, saw blade diameter: 600 mm, indexing positions: 22.5°/45°/90°, mitre adjustment: 20°/-90°/-20°, material stop movement: 200 mm, working height: 970 mm, extraction port diameter: 100 mm, weight: approx. 650 kg. 2) Mobile extraction unit AS Sägetechnik 460VT-2, suction port diameter: 100 mm, air flow rate: 1400 m³/h, machine dimensions (L/W/H): approx. 750 mm/800 mm/1800 mm, weight: approx. 100 kg. Documentation available. On-site inspection possible. Dodpfx Asw D Et Rsfnocd

Stanje: rabljeno, Hydropneumatic operating principle Max. punching height: 90 mm Back gauge stroke: 100 mm Punching stroke: 20 mm Dedpjw Inudofx Afnjcd Pressing force: 30 kN Max. profile height: 100 mm Weight: approx. 280 kg

Leto izdelave: 2001, stanje: rabljeno, Premer žaginega lista navpično: 600 mm Dedpfx Afoygkn Dsnecd Premer žaginega lista vodoravno: 500 mm Širina izreza: pri 90° obdelavi profilov do 300 mm, konične poševnine do 30° Največja višina profila: 280 mm Globina izreza: pri 90° vodoravno do 185 mm / pri 90° navpično do 230 mm Naslon za material: vrtljiv 30° - 90° - 45° Naslon za material vrtljiv z zaskočnimi točkami in digitalnim prikazom Višina izreza motorizirano nastavljiva z digitalnim prikazom Motorizirano nastavljanje kotov z digitalnim prikazom Hidropnevmatski pomik materiala preko 2-ročnega upravljanja Pnevmatijske spone za material Mazanje s hladilnim sredstvom

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Zelo dobro ohranjen Behringer VMS 400 A, vključno s dovodno valjčno progo in izhodno valjčno progo z merilno enoto Exactstop. Stroj bo na zalogi konec februarja 2026. Djdsygw E Aspfx Afnecd

Leto izdelave: 1998, stanje: rabljeno, Vrtalni stroj Eisele Multifor Dcodpfx Asyhv Edsfnod

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, velika popolnoma hidravlična žaga EISELE: teža cca 0,75 t, žagin list 440 mm Število vrtljajev: 12,5 / 25 obr/min Moč motorja: 2,6 / 3,2 kW hidravlični pomik žage hidravlična vpenjalna glava Obsegi rezanja: 200 x 100 mm (pravokotna cev) Enostranski poševni rez 45°. Dcodpfxjya U Afj Afned

Leto izdelave: 2004, stanje: rabljeno, Technical details: Saw blade diameter: 450 mm Cutting diameter: 150 mm Dsdpfxeu Nit Ro Afnscd Saw blade bore: 50 mm Saw blade diameter: 400 - 450 mm Saw blade speeds: 6 / 12 / 24 / 45 rpm Cutting range at 90 degrees, square: 140 x 140 mm Cutting range at 90 degrees, round: 150 mm Cutting range at 90 degrees, flat: 400 x 30 / 345 x 70 / 300 x 95 mm Table size: Ø 700 mm Rotating table: 360 degrees Clamping pressure: 30 bar Electrical specification - voltage/frequency: 400 / 50 V/Hz Total power requirement: 3.6 kW Machine weight approx.: 1600 kg Machine dimensions: 1.5 x 1.0 x 2.35 m CIRCULAR SAW SEMI-AUTOMATIC - PROFILE CIRCULAR SAWING MACHINE - UNDERFLOOR SAW for cutting materials such as solid steel, pipes, and profiles within the specified cutting area. Cutting speed depends on the material to be cut. Circular saw with hydraulic material clamping (adjustable clamping pressure) Mitre adjustment +30° to -90° Fitted with electro-hydraulic controls Hydraulic pump 2.2 kW; 23 l/min Coolant system integrated in machine base Piece counter

Stanje: novo, Disponible sur stock / Livraison rapide ! Vitesse de rotation 17/34 tr/min. Pour lames de scie jusqu’à 350 mm de diamètre. Avec moteur triphasé à commutation de pôles, 1,4/1,9 kW, bâti stationnaire avec dispositif de refroidissement intégré et tiroir à copeaux. Dcjdpsllvpwjfx Afnsd Plage de coupe : Plat 90° 170 x 100 mm Plat 45° 120 x 100 mm Plat 30° 85 x 100 mm (uniquement à droite) Carré 90° 100 mm Carré 45° 95 mm Carré 30° 85 mm (uniquement à droite) Rond 90° 120 mm Rond 45° 120 mm Rond 30° 100 mm (uniquement à droite) Données techniques : Longueur 895 mm Largeur 665 mm Hauteur 1750 mm Poids 300 kg Hauteur de table 900 mm Options : Convoyeurs à rouleaux et systèmes de mesure de longueur (photo = exemple, disponibles en version manuelle ou automatisée, selon accord) Nous vous recommandons notre concentré de liquide de refroidissement éprouvé pour scies « Eisele » (depuis des décennies), notre huile de microspray (pour machines équipées d’un système de microspray), ainsi que des lames de scie circulaire et des rubans de scie de haute qualité pour répondre à vos besoins spécifiques. N’hésitez pas à nous demander un devis sans engagement !

Stanje: novo, Primeren za številna področja uporabe, posebej tudi za fotovoltaično in avtomobilsko industrijo. Ponujamo vam popolnoma avtomatske krožne žage in celotna žagalna središča serij "Profilma", "KS" in "SW" z največjim premerom žaginega lista do 650 mm. Nakladalni in razkladalni sistemi so prilagojeni vašim potrebam. Učinkovit odsesovalni sistem z ločevalnikom oljne megle dopolnjuje udobje. Dcodpfsx E U Dnjx Afnsd Povprašajte nas – skupaj bomo našli optimalno rešitev za vašo proizvodnjo!

Stanje: novo, Za obdelavo vseh standardnih aluminijastih okenskih profilnih sistemov kot so Schüco, Hueck, Heroal, Reynolds itd. Univerzalna uporaba zaradi dvakrat nastavljivih prebijalnih teles Za vogalne spojke z dimenzijo utora od 25–60 mm in premikom profilne komore 0–40 mm Neomejeno po višini nastavljivi tipala, prebijalna rezila in vstavki prislonov Tipala in prebijalna telesa so opremljena z lestvicami Vgradni prislon za enostavno vstavljanje profilov, samodejno nastavljiv ob pomiku proti profilu Hidravlična blokada prislona Pnevmatski stiskalni postopek prek vzvodnega sistema zagotavlja sinhron prebijalni postopek 2 pnevmatska vpenjalna cilindra za pritrditev profilov 2 ekscentrična diska za pozicioniranje okvirjev 2 zložljivi podporni roki za profile Dodpfehmfyhsx Afnecd Upravljanje preko 2 nožnih ventilov Vključno s standardnimi orodji

Stanje: novo, Popolnoma avtomatsko žaganje in štancanje ali vrtanje v eni napravi! Za različna področja uporabe, predvsem pa za fotovoltaiko in avtomobilsko industrijo! Za uporabo z žaginimi listi Ø 500 ali 550 mm, z obračalnim mehanizmom do največje dolžine reza 4000 mm Avtomat za žaganje in štancanje Profilma 502 ST-V • za aluminijaste in plastične profile • za rezanje na dolžino in štancanje na osnovi modela Profilma 502 • popolnoma avtomatsko upravljanje Dcedpfxox Hafts Afnsd in Avtomat za žaganje in vrtanje Profilma 502 BG • za aluminijaste in plastične profile • rezanje na dolžino, vrtanje in rezanje navojev do 4 profilov hkrati • popolnoma avtomatsko upravljanje

Stanje: rabljeno, Leto izdelave: 1979, Premer reza: 440 mm Teža stroja: cca. 780 kg +++++ Upoštevajte, da je stroj razstavljen in pripravljen za nakladanje. Zaradi tega prikaz pod napetostjo ali izdelava videoposnetka nista mogoča. Dsdpfx Afef Dwa Usnecd Naš oglas vsebuje najrelevantnejše fotografije v najboljši možni kakovosti. Pošiljanje dodatnih slik žal ni mogoče. +++++

Stanje: kot nova (razstavni stroj), Leto izdelave: 2018, premer žaginega lista: 550.500 mm, Machine in perfect technical condition. Very little used. Designed for processing aluminium and PVC profiles. Mitre cuts possible at 3 levels and can be used as a splitting saw; manual adjustment of the horizontal saw blade by up to 20 mm in front of the vertical saw blade. Cutting options: rectangular, single-sided mitre, double-sided mitre, and three-sided mitre. Profile machining up to 300 mm, width up to 90°, mitre angles up to 30°. Notch depth horizontally up to 185 mm, vertically up to 210 mm at 90°. Cutting width at 90°: 300 mm, profile height: 280 mm. Manual adjustment of cut and height, positioning via mechanical digital displays. Vertical saw blade swivel range: 30° – 90° – 30° (front/center/rear), manual, positioning with digital display. Dcedpfxovtarnj Afnjd Material stop (tabletop) can be manually rotated left and right within 30° - 90° - 30°, positioning via measurement scale. Material depth stop adjustable manually using a sliding carriage and manual clamp, positioned with a digital display.