Demag Pokorny nakup rabljenega (526)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 27.551 h, vpenjalna sila: 2.200 kN, skupna višina: 2.100 mm, This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. It is an electric injection moulding machine renowned for its precision and efficiency. Ideal for anyone looking to expand their production capabilities with reliable technology. Contact us for further information. Additional Equipment • Sepro robot SDR 22 Machine Advantages Technical Machine Specifications • Screw diameter: 45 mm / screw geometry: standard / l/d ratio: 20 / specific injection pressure: 2150 bar / max. shot volume: 329 cm³ / max. shot weight: 293 g / injection rate without accumulator: 254 cm³/s • Metering stroke: 207 mm / max. nozzle stroke: 450 mm / nozzle immersion depth: 20 mm / nozzle contact force: 58 kN / number of heating zones: 4 / hopper capacity: 50 l / max. injection speed: 160 mm/s • Clamping force: 2420 kN / max. opening stroke: 550 mm / min. mould height: 300 mm / max. mould height: 580 mm / max. platen distance: 1130 mm • Platen size (h x v): 880x830 mm / tie bar spacing (h x v): 610x560 mm / ejector stroke: 150 mm / ejector force: 58 kN • Dry cycle time according to Euromap 6 (stroke): 427 mm • Net weight without oil: 10,100 kg Fgedpfx Apox D Hnyolob Dimensions Machine depth: 6460 mm

Leto izdelave: 2019, stanje: pripravljen za uporabo (rabljen), This DEMAG Systec 210/580-840 was manufactured in 2019. It is a hydraulic injection moulding machine with a clamping force of 210 tons and a power rating of 60 kW. The machine has been in operation for 31,132 hours. Consider the opportunity to purchase this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Please contact us for further information. • The dosing unit (orange part) is not included. • Integrated country-specific socket combination • Can be switched off via the main switch and shutdown program • 2 x Schuko 1Ph/230V/16A; 2 x IECEE 3Ph/400V/16A residual current circuit breaker • Pneumatic 5/2 valve no. 1 on the movable mould mounting platen; • Programmable, supplied via central air connection • Includes hoses. Inputs and outputs freely programmable; 3 inputs and 3 outputs; • Terminal point located outside the control cabinet • Interface for additional nozzle heating band; socket only • 2-circuit core pull via solenoid valve on the movable mould mounting platen; operation independent of clamping force (programmable); • With pilot-operated check valves to prevent core creep • Mould connection dimensions E (similar to Euromap March 96) • With side-mounted ejector plate, centering diameter of the fixed platen: 160 mm • Centering diameter of the moving platen: Fsdpox D Nlusfx Aplegb • Mold installation height increased by 100.0 mm • Min: 340 mm • Max: 790 mm

Leto izdelave: 2005, stanje: pripravljen za uporabo (rabljen), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 injection moulding machine was manufactured in 2005. It features a central accumulator for high-speed injection and chrome-plated tie bars. The pump drive power is 22.0 kW, operating at a mains voltage of 400 V / 50 Hz. The machine is equipped with a colour data display featuring a VGA interface, an oil cooler, and an electric screw drive. Please inquire about the possibility to purchase this hydraulic injection moulding machine SUMITOMO SHI DEMAG El-Exis S 250/630-1450. Contact us for further information. • 5 similar units available • Central accumulator for high-speed injection; core, ejector, and nozzle movement • Nozzle movement parallel to mould movement • Chrome-plated tie bars at the clamping unit • Pump drive power: 22.0 kW • Mains voltage: 400 V / 50 Hz, 3 Ph + N + PE • Separate power connections for drive and heating • Control system: colour data display with VGA interface and AT keyboard interface • Injection, holding pressure and back pressure via servo valve • Reinforced oil cooler • Separate water connections for mould and oil cooling • Compliance: basic European version, conforms to applicable safety regulations • Paint finish: bottom anthracite grey RAL 7016; upper section blue 571C MD • Elastic machine suspension • Ultrasonic position measuring system with digital data transmission for injection, ejector, mould (M) and nozzle (AWH) movements; 1/100 mm resolution for injection axis • Reduced centring diameter (D=100/125) for the fixed platen • Mould mounting dimensions type E (similar to EUROMAP), without side ejector plate Fgodpfx Asx D Rqroplob • Standard mould installation height • Safety interlock: mould opening and ejector forward only with safety gate closed • Ejector with position control via proportional valve; pressure and speed can be programmed independently • Frequency-controlled electric screw drive

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, obratovalne ure: 8.000 h, vpenjalna sila: 500 kN, premer vijaka: 25 mm, injekcijska masa: 46 g, skupna višina: 1.779 mm, skupna masa: 4.200 kg, This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Included with the machine are a granulate dryer, an industrial robot, a conveyor belt, and temperature control units. Ideal for high-quality injection moulding processes. Please contact us for more information about this machine. Additional Equipment • Granulate dryer • Handling system • Conveyor belt – 1400 mm x 400 mm • Precision scale Fgsdpex D Eccsfx Aplob • Temperature control units – 2x HB-Therm Machine Advantages Technical Machine Advantages • Exceptional energy efficiency • Increased platen rigidity and mould safety • Fully electric direct drive • Ultra-precise direct drive motors with a response time of 0.1 ms • Displacement: 52 cm³ • Injection pressure: 2180 bar • Clamping platens: 520 x 570 mm Additional Information Control Unit Modern control system with NC5+ Automatic adjustment of mould height and clamping force Energy-saving routines Dimensions Machine depth: 4308 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 17.577 h, vpenjalna sila: 1.600 kN, skupna višina: 2.060 mm, This SUMITOMO SHI DEMAG IntElect 160/520-340 smart was manufactured in 2013. It is an all-electric injection molding machine known for its precision and efficiency. If you are in the market for a high-quality injection molding machine, consider the SUMITOMO SHI DEMAG IntElect 160/520-340 smart, which we are offering for sale. Contact us for further information. Additional Equipment • Sepro Robot SDR 11 Machine Advantages Technical Machine Specifications • Clamping unit: 160 / clamping force: 1760 kN / max. opening stroke: 495 mm / minimum mold height: 275 mm / maximum mold height: 585 mm • Distance between platens, max.: 1080 mm / platen size (H x V): 760 x 785 mm / tie bar spacing (H x V): 520 x 520 mm • Ejector stroke: 125 mm / ejector force: 35 kN • Injection unit: 340 / screw diameter: 35 mm / L/D ratio: 20 / injection volume (PS), without accumulator: 288 cm³/s • Metering stroke: 162 mm / max. nozzle stroke: 350 mm / nozzle immersion depth (svo): 20 mm / nozzle contact force: 30 kN • Material hopper capacity: 35 l / max. injection speed, standard: 300 mm/s / max. injection speed, increased: 500 mm/s • Net weight without oil: 7300 kg Additional Information Electrical and pneumatic interfaces: - Sockets: - 2 x Schuko (1Ph, 230V, 10A) - 2 x IECEE (3Ph, 400V, 16A) – switchable via main switch - Additional Schuko socket also available (same specification) - Valves: - 1 x pneumatic 5/2 valve on moving platen (programmable) - 2 x pneumatic 5/2 valves on stationary platen (programmable) - I/O: - 3 digital inputs / 3 digital outputs (freely programmable) - Terminal strip outside the control cabinet Air & Cooling: - Central air supply and piping - Cooling system: open circuit - Cooling water controller: 4 circuits with temperature display (max. 10 l/min per circuit) - Separate water inlet for cooling (mold + machine) - Mold cooling shutoff (time programmable) Mechanical Features & Movement: - Clamping and injection unit colors: - Jet black (RAL9005): bed, pump station, lower control cabinet - Signal white (RAL9003): clamping unit, injection unit, safety covers, guards, safety doors - Platen layout: E standard (similar to EUROMAP, March 1996) Fodpfx Ajx D Hnmopljgb - No side ejector plate - Ejector: held in front position by spring-loaded mold ejector - Standard mold height - Standard closing speed - Active movements only when guard is closed - Screw: wear-resistant nitrided cylinder, standard L:D, 35 mm diameter - Non-return valve: 3-piece, ring-shaped Control, Programming & Monitoring: - Inputs/outputs and sequence freely programmable - Switch programs (e.g., dry run, start-up scrap counter, timed cooling) - Injection process: - Injection force at max. injection speed: 200 mm/s - Back pressure programmable via 6-point polygon - Hold pressure switchover depending on melt pressure - Post-injection, back pressure, dosing: closed-loop control - Feed throat temperature control: closed-loop, max. 90°C ±9°C - Reduced nozzle closure force (programmable) - Clamping force: closed-loop controlled

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, obratovalne ure: 122.158 h, vpenjalna sila: 3.300 kN, premer vijaka: 60 mm, This hydraulic injection moulding machine, DEMAG ET 330 - 1450, was manufactured in 1995. It features a clamping force of 3300 kN and a screw diameter of 60 mm, providing robust performance for a wide range of applications. The machine is equipped with a Wittmann W322-121 linear robot, enhancing automation capabilities. Take advantage of this opportunity to purchase the hydraulic injection moulding machine DEMAG ET 330 - 1450. Contact us for further details. • Clamping Unit: • Clamping force: 3630 kN • Tie bar spacing (H x V): 710 x 630 mm • Platen dimensions (H x V): 1040 x 950 mm • Mould installation height: min. 330 mm / max. 830 mm • Opening stroke: 675 mm • Platen distance (daylight): 1505 mm • Permissible mould weight: fixed side (DS) 1200 kg; moving side (AS) 2400 kg; total 3600 kg • Ejector: stroke 200 mm; force 80 kN; retraction force 35 kN • Core pull control: yes (2 units, on ejector side/AS) • Shut-off nozzle: yes (hydraulic/pneumatic 1/1) • Injection Unit 1: • Unit Code: 1450-60 • Screw diameter: 60 mm • Injection pressure: 1905 bar • Shot volume: 763 cm³ • Shot weight (PS): 695 g • Screw L/D ratio: 20 • Nozzle radius: 15 mm • Maximum dosing stroke: 270 mm • Plasticising rate: 41 g/s • Equipment/Controls: • Hardened (wear-resistant) injection unit: yes • Pneumatic ejector: yes • Process control: SPC (yes/yes) Fgsdpfxjyg Nkwo Apljb • Printer interface: integrated • Hot runner control: 0 zone (none) • Maintenance: • Hose replacement performed in 2017 Additional Equipment • Wittmann W322-121 CNC linear robot/extraction unit (included with the machine) • Travel paths: Y-axis 1600 mm, X-axis 500 mm, Z-axis 2500 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 91.810 h, vpenjalna sila: 2.500 kN, premer vijaka: 60 mm, injekcijska masa: 579 g, This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2,500 kN and a locking force of 2,750 kN. The machine is equipped with a Wittmann linear robot and supports a maximum mould weight of 3,300 kg. It is fitted with a screw diameter of 60 mm and offers a shot volume of 636 cm³. Consider this opportunity to purchase this hydraulic injection molding machine DEMAG ET250/630-840 Concept. Contact us for further information on this machine. • Locking force: 2,750 kN • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions (H x V): 950 x 950 mm • Mould height: 330–830 mm • Opening stroke: 675 mm • Max. daylight (distance between platens): 1,505 mm • Mould weight: fixed side 1,100 kg, moving side 2,200 kg (total 3,300 kg) • Ejector: • Stroke: 200 mm • Force: 80 kN • Centring ring diameter: 200 mm • Pneumatic ejector: yes • Core pulls: 2 on moving side (AS) • Injection unit: • Unit size: 840 • L/D: 20 • Shot volume: 636 cm³ • Injection pressure: 1,351 bar • Plasticising rate (PS): 74 g/s • Screw speed: 326 rpm • Nozzle radius: 15 mm; nozzle orifice: 3 mm • Max. dosing stroke: 225 mm • Note: Second injection unit listed without data → single-component machine • Interfaces/controls: • Printer interface: yes • Process control/SPC: yes Fgedpfxeyfq Als Apleb Additional equipment • Robot/handling: Wittmann W633-961 linear robot • Travel distances: Y (vertical) 1,600 mm, X 900 mm, Z 2,500 mm • Hot runner control: 9 zones • Mould monitoring: Kistler pressure (p=1) / temperature (t=0) system • Needle shut-off control: hydraulic (not equipped for pneumatic)

Leto izdelave: 2019, obratovalne ure: 18.138 h, stanje: pripravljen za uporabo (rabljen), skupna masa: 25.340 kg, Ta stroj SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 je bil izdelan leta 2019. Gre za robusten električni stroj za brizganje plastike s premerom polža 50 mm, zapiralno silo 3.500 kN in razmakom med stebri 820 mm. Obdelal je 18.138 delovnih ur in opravil 12.875.090 ciklov. Če iščete zmogljiv in kakovosten stroj za brizganje, priporočamo, da razmislite o tem modelu SUMITOMO SHI DEMAG El-Exis SP 350/820-1600, ki je naprodaj pri nas. Dodatne informacije Fgsdpfjx D Nxzsx Apleb • Premer polža: 50 mm • Največji dozirni volumen: 530 cc • Število ciklov: 12.875.090 • Razmak med stebri: 820 mm • Zapiralna sila: 3.500 kN

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Kontaktirajte nas za ponudbo Fjdpjyycihjfx Apljgb

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2004, številka stroja/vozila: LS137, Tehnični podatki: 1x Demag KBK 2 stebrni vrtljivi žerjav NL 500KG z Demag DK verižnim vitlom Nosilnost pri polnem iztegu 500KG Višina: cca 4,05 m Spodnji rob nosilca: cca 3,55 m Izteg: 4 m Višina kavlja: cca 2,8 m Skupna teža cca 1000KG vključno z osnovno ploščo 115x115 cm z 500KG Demag DK verižnim vitlom vklj. zatič, kabelski verižnik, voziček, zaključna kapica itd. Območje vrtenja 300°, priklop na 400V 16A Žerjav je razstavljen in takoj na voljo Lokacija artikla: 75053 Gondelsheim Na voljo so tudi drugi žerjavi, nosilnost 80–5000 kg, povprašajte Glejte slike Fgodjywfmwopfx Aplob Pošiljanje preko špedicije ali osebni prevzem samo po dogovoru o terminu

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1986, številka stroja/vozila: LS14 + RIO RES, Tehnični podatki: 1x Demag KBK 2 stebrno vrtljivi žerjav, nosilnost 500 kg, z verižnim dvigalom Demag PK Žerjav je na voljo skupaj 4x! Nosilnost pri polnem iztegu: 500 kg Višina: cca 3,55 m Spodnji rob izteznega nosilca: cca 3 m Izteg: 3 m Višina kljuke: cca 2,6 m Skupna teža: cca 300 kg Z 500 kg verižnim dvigalom Demag PK Vključuje zatič, kabelsko verigo, voziček, končni pokrov itd. Fgedsywfl Topfx Apljb Območje vrtenja 300°, priklop na 400 V 16 A Žerjav je demontiran in takoj na voljo Lokacija artikla: 75053 Gondelsheim Na voljo so tudi drugi žerjavi, nosilnost 80-5000 kg, prosim povprašajte Glejte slike Pošiljanje s špedicijo ali osebni prevzem le po predhodnem dogovoru

Stanje: dober (rabljeno), Trenjsko kolo, pogonsko kolo za mostno dvigalo, mostno dvigalo, halno dvigalo, montažno dvigalo, delovno mesto dvigalo, kolesni blok, sistem kolesnih blokov Fedpfxew Uxt Rs Aplogb -Proizvajalec: Demag, kolesni blok za pogonski mehanizem dvigala -Tip: žal ni točne tip oznake -Premer pogonskega kolesa: 125 mm -Pogonsko kolo: širina tira med merami 48 mm -Prevzem: Ø 30 mm, mere glej slike -Količina: na voljo 2 kosa -Cena: na kos -Dimenzije: 220/97/V160 mm -Teža: 8,5 kg/kos

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 800 kN, premer vijaka: 30 mm, Injection moulding machine from Demag, model 80/420-200 System, for sale. The machine is in good and fully functional condition. ATTENTION: No backup disks available Technical data: Year of manufacture: 2001 Clamping force: 800 kN Tie bar distance (vertical): 420 mm Tie bar distance (horizontal): 420 mm Platen size (horizontal): 590 mm Fgedpenfu I Iofx Aplsb Platen size (vertical): 600 mm Minimum installation height: 250 mm Maximum platen gap: 700 mm Opening stroke: 450 mm Ejector stroke: 150 mm Ejector force: 41 kN Max. mold weight: 700 kg Screw diameter: 30 mm Dimensions: approx. 4.5 x 1.5 x 2 m Weight: 4 t Transport and loading can be organised across Europe at extra cost on request. Prices plus VAT. Inspection possible upon appointment. Please contact us—our team is happy to assist you. Trade-in or exchange is possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet economical metalworking machine for your production? Or would you like to sell yours? For more information or ways to contact us, please visit our website.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Oprema: dokumentacija / priročnik, Demag Systec 100/420-310 (2015) Panel: NC5 Vpenjalna sila: 100 t Premer vijaka: 30 mm Fgedoyg Eu Sepfx Aplob Razdalja med stebri V: 420 mm Razdalja med stebri H: 420 mm Tip: Horizontalen Pogon: Hidravličen Morda kupiti Wittmann W818 linearni robot Z = 1500 mm

Stanje: dober (rabljeno), Demag chain hoist Model: PK2N-F, PK2N Lifting capacity: 250 kg (single-strand) or 500 kg (double-strand), Sample photo, various versions available, Ready for immediate use. Fedpfx Apocalf Aslogb

Stanje: rabljeno, Leto izdelave: 2001, Clamping force: 350 t Platen dimensions: 1040 x 950 mm Fgedova Ht Sspfx Aplsb Tie bar spacing: 710 x 630 mm Screw diameter: 50 mm Shot weight: 400 g Shot volume: 442 cm³ Design: Horizontal Drive type: Hydraulic

Leto izdelave: 2024, stanje: novo, Demag NC3 panel, new, never used. Width: 30 cm Fedpjqvuinjfx Aplogb Height: 5 cm Length: 50 cm

Leto izdelave: 2024, stanje: novo, Demag Panel NC3 Made in Germany Width 30 cm Height 5 cm Length 50 cm Fgodsqvuigepfx Aplob TYPE: 6EJ5 398-0DE14

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1986, številka stroja/vozila: MIKA-CN, Tehnične podatke: 1x Demag KBK 1 stebrno vrtljivi žerjav NL 125KG z verižnim vitlom Demag DC (125 kg - letnik 2007) Fgsdpfxsyu E I Io Apljb Nosilnost pri polnem iztegu: 125KG Višina: cca 3,05 m Višina pod konzolo: cca 2,55 m Iztez: 3 m Višina kljuke: cca 2,15 m Skupna teža: cca 300KG Z verižnim vitlom Demag DC 125KG Vključuje: zatič, vodilo za kable, voziček, zaključni pokrov itd. Območje vrtenja 300°, priklop na 400V 16A Žerjav je demontiran in takoj na voljo Lokacija artikla: 75053 Gondelsheim Na voljo so tudi drugi žerjavi, nosilnosti 80-5000Kg, povprašajte za več informacij Glejte slike Dostava s špedicijo ali osebni prevzem le po dogovoru o terminu

Stanje: novo, DEMAG: zavorni obroč / zavorna obloga / stožčasta zavorna obloga – 50 kosov (novo). 1. Tip: KB 160 – 4 kosi. 2. Tip: KB 100 – 2 kosa. 3. Tip: KB 200 – 2 kosa. 4. Tip: KB 140 – 2 kosa. 5. Tip: KB 125 – 5 kosov. 6. Tip: KB 112 – 1 kos. 7. Tip: KB 90 – 2 kosa. 8. Tip: KB 80 – 11 kosov. 9. Tip: št. 405 – 1 kos. 10. Tip: št. 616 654 – 5 kosov. 11. Tip: št. 620 606 – 7 kosov. 12. Tip: št. 612 648 44 – 6 kosov. 13. Tip: št. 628 626 44 – 2 kosa. Fsdpfjyy Takox Aplsgb DEMAG: zavorni pokrov / pokrov zavore – 38 kosov. Različne velikosti (novo / rabljeno).

Stanje: dober (rabljeno), Load capacity: 500 kg Fgodpfsg T Ib Hex Aplsb Total length: 10 m

Stanje: dober (rabljeno), Overall height: 2960 mm Lifting range: 1100-2400 mm Fgedpoik E S Dofx Apljb Boom length: 900 mm

Stanje: rabljeno, Funkcionalnost: omejena funkcionalnost, vrsta prenosa: hidrostat, vrsta goriva: dizel, barva: rumena, skupna masa: 20.000 kg, število sedežev: 1, prva registracija: 01/1992, Leto izdelave: 1992, številka stroja/vozila: 20412, Oprema: dodatne luči, kabina, parkirni grelec, Ponujamo ta rabljen mobilni dvigalo Mannesmann Demag V 73, letnik 1992. Tip: V 73 Številka šasije: 20 412 Leto prve uporabe: 1992 Dovoljena skupna masa: 20.000 kg Dovoljena obremenitev prednje osi: 10.000 kg Maksimalna nosilnost: 14 t Maksimalni doseg: 13 m Zadnji pregled: 2023 Fgodeyi D Ddopfx Aplsb Omejevalnik nosilnosti ni v delovanju. Za vprašanja ali dodatne informacije nam lahko pišete.

Stanje: dober (rabljeno), Gear motor, electric motor, geared electric motor, crane motor, crane drive -Manufacturer: DEMAG, gear motor from Lotze HDZK swivel bending machine -Type: 24/14K4 -Speed: approx. 60 rpm -Shaft: Ø 45 x 70 mm -Motor: 5 kW / 1420 rpm -Voltage: 220/380 V -Dimensions: 980/400/H410 mm Fodpoip Eraefx Aplegb -Weight: 255 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Injection Moulding Machine DEMAG System 800/1120-9500 Basic Information Manufacturer: DEMAG Model: System 800/1120-9500 Year of manufacture: 2008 Clamping Unit Clamping force: 8,000 kN Mounting platen dimensions (horizontal × vertical): 1620 × 1500 mm Tie bar spacing (horizontal × vertical): 1120 × 1000 mm Minimum mould height: 500 mm Maximum mould height: 1050 mm Maximum daylight between platens: 2080 mm Opening stroke: 1030 mm Ejector stroke: 350 mm Ejector force: 139 kN Maximum mould weight: 7,200 kg Injection Unit Screw diameter: 130 mm Shot volume: 7300 cm³ Shot weight (PS): 6640 g Fgodjyugctspfx Aplob Maximum injection pressure: 1300 bar Screw length: 20 L/D Electrical and Hydraulic Equipment Pump drive rated power: 110 kW Heater power: 79 kW Hydraulic oil tank capacity: 1300 l Machine Dimensions and Weight Machine dimensions (L × W × H): 12.3 × 2.7 × 2.7 m Machine weight: 33,500 kg Control cabinet weight: 9,700 kg Optional Energy Saving System (ESS) The machine can be equipped with a modern ESS servo drive system, which increases the energy efficiency of hydraulic plastic injection moulding machines. The system controls the hydraulic pump motor operation via a frequency inverter, adjusting the motor speed to the current requirements of the production cycle. As a result, electrical energy is only consumed when the machine actually requires it. Key Benefits - Reduction of electricity consumption by up to 30% - Hydraulic pump servo drive technology - World-class, proven technology used in plastics processing industry - Reduced energy losses during idle - Lower hydraulic system temperature rise - Extended service life of hydraulic components - Suitable for retrofitting existing hydraulic injection moulding machines The ESS system significantly lowers machine operating costs while maintaining full production parameters.