Deckel Fp 4 Nc nakup rabljenega (677)

Stanje: rabljeno, Universal tool milling machine DECKEL Type FP 1 Mach. No. 33064 Year of manufacture: approx. 1960, overhauled in 2012 Travel paths X: 300 mm Y: 150 mm Z: 330 mm Table size 600 x 210 mm Spindle taper MK 4 - S20 x 2 Vertical spindle speed 95-1900 rpm, 12 steps Horizontal spindle speed 60-1200 rpm, 12 steps Knodpsdzp T Ejfx Ah Ajf Motor power 1.1 and 1.4 kW Power supply 380 Volt, 50 Hz - Feed on X and Y axes - Quill adjustment on vertical milling head - Fixed angle table - Coolant system with mechanical pump in the machine base - Separate control cabinet with cable and plug connection Required space L x W x H 1100 x 900 x 1600 mm Weight approx. 900 kg Good condition Machine was overhauled in 2012.

Stanje: rabljeno, Leto izdelave: 1976, x-travel 350 mm Kodpfowwwr Eex Ah Ajnf y-travel 150 mm z-travel 340 mm Table clamping surface 600 x 210 mm Spindle taper SK 40 Spindle speeds 40 - 2000 rpm Feeds 5 - 500 mm/min Rapid traverse 1.2 m/min Total power requirement 1.9 kW Machine weight approx. 0.7 t - Machine from training workshop - Accessories: fixed table, vertical head with extendable quill, 3-axis HEIDENHAIN digital readout, various short and long arbors, various collets, original DECKEL tool cabinet

Stanje: dober (rabljeno), Orodjarska rezkalna naprava DECKEL FP 1 s 3-osnim aktivnim digitalnim prikazovalnikom TNC 113 iz izobraževalne ustanove - Hodi X/Y/Z 300x160x340 mm - Območje vrtljajev 40-2000 vrt/min - Brezstopenjski pomik v vseh treh oseh - Hitri pomik v vseh treh oseh - Navpična glava pomična za 100 mm - Navpična - vodoravna rezkalna naprava - Orodni vpenjalni sistem ISO 40 - Pogonska moč 1,5 / 1,9 kW - Tog kotni stroj - Posoda za ostružke - Hladilna naprava - Delovna svetilka - Dokumentacija Dimenzije: D x Š x V 1,3x1,2x1,7 m / Teža 900 kg Ksdpfx Ahow Rbxns Aonf Možne so napake ali tipkarske napake

Leto izdelave: 1968, Stanje: rabljeno, Deckel Milling Machine FP1 with 3-axis digital readout 380V Machine no. 37729 120–1900 rpm Travel X-axis: 300 mm Travel Y-axis: 150 mm Travel Z-axis: 340 mm Tool holder: MK 4 with drawbar thread S 20 x 2 Milling head type: Vertical milling head Table type: Fixed table Clamping surface: 600 x 210 mm T-slot size: 12 mm Feed X-axis: 290 mm Feed Y-axis: 150 mm Feed Z-axis: 330 mm Weight: 700 kg Deckel Milling Machine FP1 Kodpfx Ajpmrpxsh Asnf ID: M100000409

Leto izdelave: 2019, Stanje: pripravljen za uporabo (rabljen), A Deckel FP2 universal tool milling machine, completely overhauled in 2019, is available. Travel range X/Y/Z: 400mm/200mm/400mm, table dimensions X/Y: 700mm/330mm, spindle speed: 2000 rpm, tool holder: SK40, machine dimensions X/Y/Z: approx. 1600mm/1400mm/1600mm, weight: approx. 1250kg. An on-site inspection is possible. Kodevf Iy Dopfx Ah Asnf

Stanje: dober (rabljeno), 1 used universal tool milling machine Make: Deckel Model: FP 1 Year of manufacture: 1982 Technical specifications: X-axis travel: 300 mm Y-axis travel: 160 mm Z-axis travel: 340 mm Spindle taper: SK 40 Ksdpfx Aorn I Rzoh Asnf Table size: 600 x 210 mm Spindle speeds: 40–2000 rpm Machine weight approx.: 1 t Space requirement approx.: 1.6 x 1.3 x 1.8 m

Stanje: rabljeno, x-hod 390 mm y-hod 200 mm z-hod 390 mm Velikost mize 775 x 330 mm Vpenjalno vreteno ISO SK 40 Območje vrtljajev vretena 40 - 2000 min⁻¹ Hod pinole 40 mm Skupna moč 2,2 kW Teža stroja cca 1,4 t Dimenzije D x Š x V 1,75 x 1,5 x 1,8 m Univerzalni rezkalni stroj - Digitalni prikaz - Zaščita proti ostružkom - Hladilni sistem - Strojna svetilka Kodpfx Ahjxfb Hgj Ajnf - Posoda za ostružke - Noge stroja - Navodila za uporabo

Stanje: rabljeno, Leto izdelave: 1978, X-travel 300 mm y-travel 160 mm z-travel 340 mm Clamping surface of table 600 x 210 mm Spindle taper SK 40 Spindle speeds 40 - 2000 rpm Feeds 5 - 500 mm/min Rapid traverse 1.2 m/min Total power requirement 1.9 kW Machine weight approx. 0.7 t Ksdpfx Aewl N R Neh Aenf - Machine from training workshop - Accessories: fixed table, vertical head with extendable quill, digital readout on 3 axes HEIDENHAIN, counter bearing, various short and long milling arbors, various collets, original DECKEL tool cabinet

Stanje: rabljeno,

Leto izdelave: 2006, obratovalne ure: 109.000 h, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Horizontal machining centre with 6-station pallet system Kjdpfxemfrgnj Ah Asnf The machine has only been used for aluminium – new spindle installed in 2020 TECHNICAL DETAILS X-axis: 700 mm Y-axis: 800 mm Z-axis: 800 mm NC rotary table, B-axis 0.001° Spindle speed: max. 18,000 rpm Control: SIEMENS 840D Shopmill Clamping surface: 500 x 500 mm Table load capacity: max. 800 kg Workpiece diameter: max. 800 mm Workpiece height: max. 900 mm Tool holder: HSK 63 Tool changer: 180 positions Spindle power: max. 30 kW Torque: 5,000 Nm Holding torque: 5,000 Nm Rapid traverse/feed rate: 60 m/min Feed force X/Y/Z: 10 kN EQUIPMENT - Chip conveyor - Pallet station for 6 pallets - Automatic 3D tool measurement with M+H wireless probe - Coolant system with paper band filter - Through-spindle coolant system with band filter, 40 bar 30 tool pockets in the magazine are defective.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2102-2641, Deckel FP 1 Aktiv milling machine with Heidenhain TNC113 digital readout in very good condition, with original paintwork. Technical specifications: * Year of manufacture: 1985, Machine No. 2102-2641 * Swivel/tilt/rotary table * Spindle speed: 40 - 2000 rpm * Infinitely variable feed in 3 axes * Rapid traverse in 3 axes * Spindle brake * Travel X/Y/Z: 300/160/340 mm * Vertical milling head adjustable on spindle support by 100 mm * Vertical quill * Tool clamping system SK40/S20x2 * Weight: approx. 800 kg Accessories and equipment: Knedpfjf E Ilzjx Ah Ajf * 3-axis digital display Heidenhain TNC113 * Coolant system * Operating manual, spare parts list The offered Deckel FP 1 Aktiv milling machine is in very good condition. All spindles move smoothly with minimal backlash. All guides have been inspected and are in very, very good condition. The machine runs smoothly at all speeds. All bellows, wipers, rollers, etc. are in excellent or new condition; oil change has been performed. Mechanically and electrically tested. You are warmly invited to inspect and test this machine and see its excellent condition for yourself.

Stanje: dober (rabljeno), Leto izdelave: 1966, Universal Milling Machine Deckel FP2 -WKG 512- Offered here is a universal milling machine manufactured by Deckel, model FP2. Technical Data Manufacturer: Deckel Model: FP2 Year of manufacture: 1966 Knjdpfx Aourk Exjh Aof Clamping surface: 730 x 240 mm Hydraulic vice jaw width: 125 mm Clamping range: up to 225 mm Collet set: 0.5 mm – 17.5 mm

Stanje: dober (rabljeno), Friedrich Deckel FP 2 LB Tool Milling Machine Accessories are not included in the scope of delivery, but can be purchased separately. The Deckel FP 2 LB universal milling machine is characterized by its extremely robust base and is designed as a travelling column machine. This means that the machine maintains its precision even when machining heavy workpieces weighing up to 1000 kg. Another feature is the 45-degree slant bed. After removing the universal table, this design allows direct clamping and machining of V-engine blocks with a 90-degree cylinder angle, such as American V8 engines. The long travel distance of 800 mm is also an advantage in this application. Technical Data: Deckel Universal Milling Machine FP 2 LB Knsdpfegyw S Tox Ah Aef Digital readout: 3-axis Heidenhain digital display Travel X-axis: 800 mm Travel Y-axis: 300 mm Travel Z-axis: 400 mm Tool holder: SK 40 drawbar thread S 20 x 2 Milling head type: Vertical milling head Speed range: 40 - 2000 rpm Number of speed steps: 18 Table type: Universal swivel/tilting table (± 45° / ± 15°) Clamping surface: 1000 x 520 mm T-slot size: 16 mm Machine vice: 160 mm Connected load: 9.5 kVA Weight: approx. 1900 kg Dimensions: approx. 1570 x 1675 x 1850 mm You will find more new and used items in our shop! International shipping costs on request!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Universal milling machine Deckel FP1 repowered by FPS, year of manufacture 2010, with 3-axis digital readout Heidenhain ND 780, as new! Technical data: - Machine No.: 2101-51084, year 2011 - Fixed angle table - Spindle speed: 40 - 2000 rpm - Feed on 2 axes - Drive power: 1 / 1.5 kW - Travel X/Y/Z: 300/150/340 mm - Vertical quill SK40 and horizontal quill SK40 - Drawbar system: S20x2 - Weight approx. 700 kg Accessories and equipment: Knsdpfjwpi Dqox Ah Ajf - 3-axis digital readout Heidenhain ND 780 - Hydraulic vice - Collets - Tool holders - Milling cutters - Operating manual - Coolant system About the machine: Offered here is a Deckel FP1 universal milling machine, repowered by FPS, in like-new condition. Included accessories are a hydraulic vice with swivel base, collet chucks, tool holders, and milling cutters. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the Deckel on site under power. The machine is immediately available.

Stanje: potreben popravila (rabljeno), Leto izdelave: 1995, obratovalne ure: 18.000 h, Funkcionalnost: omejena funkcionalnost, potovalna razdalja osi X: 880 mm, pomik osi Y: 630 mm, pomik po osi Z: 630 mm, Oprema: transportni trak za ostružke, For sale: DECKEL MAHO DMU 80 T – a robust and precise 3-axis machining center with a large clamping table. Knodpfx Aoxphdgeh Aef The machine is still connected to power and fully functional – a test run can be arranged upon request. However, axis overhauls are required. On-site loading can be organized. Technical data: Travel (X/Y/Z): 880 / 630 / 630 mm Table clamping surface: 1250 x 700 mm Table load capacity: 600 / 500 kg Spindle taper: SK 40 (DIN 69871) Spindle speed range: Infinitely variable, 20 – 12,000 rpm Control: HEIDENHAIN TNC 426/430 Feed rate X/Y/Z: Infinitely variable, 20 – 15,000 mm/min Rapid traverse: 30 m/min Tool changer: 25 positions Tool data: Ø 80 / 130 mm | Max. length 315 mm | Max. weight 8 kg Total power requirement: 60 kW Machine weight: approx. 9.6 t Dimensions (L x W x H): 4.53 x 2.60 x 2.50 m Accessories: - Electronic handwheel - Chip conveyor (screw conveyor) - Coolant system ✅ Your benefits at a glance: - Ready for immediate use – machine is connected and can be tested - Solid 3-axis machining center - High spindle speeds & feed rates for efficient machining - On-site loading available - Attractive price-performance ratio Location: 69181 Leimen Fixed price: €10,000 If interested or to arrange a viewing/test run, please get in touch!

Stanje: novo, Leto izdelave: 2025, Overhauled, as-new machine, modernized to meet the legally required safety standard “state of the art” according to operational safety regulations of the professional associations. Control Cabinet Electronics Installation of a new CE-compliant control cabinet in accordance with the latest statutory regulations of the professional associations: BGVA 3 / DIN EN 60204-1 new machine standard. Optional: complete machine in CE execution. A CE declaration of conformity will be issued for the machine, making FPS Werkzeugmaschinen GmbH the legal manufacturer. This ensures the machine complies with the OPERATING SAFETY REGULATION (BetrSichV). The machine’s year of construction is considered to be the delivery date. Standards applied: EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1. Control 3-axis FPS Aktiv digital display Speed 25 - 2500 rpm, geometrically stepped direct gearbox with 18 speed stages for maximum torque / milling performance Feed 5 to 500 mm/min, infinitely variable Rapid Traverse 1.2 m/min Quill Extendable quill, vertical 100 mm, SK40 with M16 drawbar thread optional: with DECKEL saw thread S20 x 2 Extendable quill, horizontal approx. 100 mm Axes X/Y/Z: 800 / 300 / 400 mm Kjdpfjh Sptnex Ah Asnf Table Rigid angle table, 1000 x 440 mm, load capacity 2000 kg Equipment • Vertical and horizontal spindle • Milling head manually swivels +/- 90° Options • Z-axis bellows • Chip tray • Machine lamp • Central lubrication • Universal table • Rotary table • Slotting head • Dividing head • Steady rest • etc.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP3 with New 3-Axis FPS Aktiv Digital Readout (Heidenhain) | General Overhaul by FPS 2015 | Like-New Condition Technical Data: • Year of manufacture: 1980 | Machine No. 2201-5045 • Fixed angle table • Spindle speed: 25 - 2,500 rpm • Infinitely variable feed rate on all 3 axes • Rapid traverse on all 3 axes Ksdpfeu Dm E Hex Ah Aonf • Motor power: 2.0 / 4.0 kW • Spindle brake • Travel (X/Y/Z): 500 / 300 / 400 mm • Vertical milling head movable on spindle head by 200 mm • Extendable vertical and horizontal quill – SK40 • Drawbar system M16 • Weight: approx. 1,500 kg Equipment and Accessories: • 3-axis Aktiv Digital Readout (Heidenhain, latest version) • Coolant system • Central lubrication system About the Machine: Offered is a Deckel FP3 universal milling machine in like-new condition. The FP3 was completely overhauled by FPS in 2015 and has seen little use since then. The machine has minimal backlash and all spindles move smoothly. This newer FP3 model features infinitely variable feed rate on all three axes, as well as rapid traverse for each axis. A major advantage is the Aktiv 3-axis digital readout. With the Heidenhain position control, you can enter target dimensions which the machine automatically travels to. An oil change has been performed. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power at our location. The machine is available immediately.

Stanje: novo, Leto izdelave: 2025, Completely overhauled, as-new condition machine, upgraded to the legally mandated safety standard “State of the Art” in accordance with the Occupational Health and Safety Regulation of the Professional Associations. Control Cabinet Electronics: Installation of a new CE-compliant control cabinet in line with the latest statutory requirements of the trade associations: BGVA 3 / DIN-EN 60204-1 new machine standard. Optionally, the complete machine can be delivered in CE configuration. A CE Declaration of Conformity is issued for this machine, making FPS Werkzeugmaschinen GmbH the manufacturer of record. This means the machine fully complies with the requirements of the German Ordinance on Industrial Safety and Health (BetrSichV). The year of manufacture is aligned with the machine’s delivery date. Certified to: EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1. Control: 3-axis FPS Aktiv digital position display Spindle speed: 50 – 2,500 rpm, geometrically graduated direct-drive gearbox with 18 speed steps for maximum torque and milling performance Feed: 6.3 to 630 mm/min, infinitely variable Kodpfxoh R S Tce Ah Aonf Rapid traverse: 1.3 m/min Quill: Extendable vertical quill, 60 mm SK40 with M16 drawbar thread (optional: with DECKEL saw thread S20 x 2) Extendable horizontal quill approx. 100 mm Axes travel: X/Y/Z 500/400/400 mm Table: Fixed angle table 800 x 460 mm Equipment: • Vertical and horizontal spindle • Milling head manually swivels +/- 90° Options: • Z-axis bellows • Chip tray • Machine lamp • Centralized lubrication • Universal table • Rotary table • Shaping head • Dividing head • Steady rest • etc.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP2 repowered by FPS, year of manufacture 2013, with 3-axis Heidenhain ND 780 digital readout, as new condition!! Technical Data: >> Machine No.: 2202-7020, FPS No.: 3364, year: 2013 >> Rigid angle table >> Spindle speed: 40 – 2000 rpm >> Feed and rapid traverse on 3 axes >> Drive power: 2.2 kW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: vertical & horizontal spindle >> Extendable vertical and horizontal quills – SK-40 >> Drawbar system S20x2 Kjdpfxsvbifge Ah Ajnf >> Weight approx. 1100 kg Accessories and Features: >> 3-axis Heidenhain ND 780 digital readout >> Brake motor with immediate spindle stop >> Centralized lubrication >> 2x emergency stop >> Operating manual >> Coolant system About the Machine: For sale is a universal milling machine Deckel FP2, repowered by FPS, in as-new condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine features an electrical centralized lubrication system and two emergency stop switches for added safety. As of 2013, both mechanically and electrically tested. The Heidenhain digital readout simplifies work and ensures even greater precision. Take the opportunity to inspect and test the Deckel under power on site. The machine is available immediately.

Stanje: zelo dobro (rabljeno), dolžina podajanja os X: 400 mm, dolžina pomika po osi Y: 200 mm, dolžina podajanja os Z: 400 mm, For sale is a conventional milling machine by Deckel, model FP2. The machine is in excellent condition, was overhauled by Harich (date unknown), and is ready for immediate use. Knsdpfxou Ti Akj Ah Aof Technical specifications: Toolholder: SK 40 Travels X/Y/Z: 400 / 200 / 400 mm Speed range: 40 - 2000 rpm Vertical spindle travel: 60 mm Horizontal spindle travel: 100 mm Feeds: 8 - 400 mm/rev Table size: 700 x 330 mm Motor power: 2.2 kW Connection: 400 V / 16 A plug Weight: approx. 1,300 kg Vise and tools are NOT included in the offer but can be supplied upon request. Transport and loading can be organized across Europe for an additional charge, if required. Prices plus VAT. Inspection possible by appointment. Contact us—our team will be happy to assist you. Trade-in or exchange possible! Machine purchase/sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For more information or contact options, please visit our website.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP3 with 3-Axis Heidenhain Digital Readout and Infinitely Variable Feed – Excellent Condition Technical Specifications: >> Year of manufacture: 1982 Machine No. 2201-5598 >> Swivel-tilt-rotary table (planed, as new) >> Spindle speeds: 25 – 2500 rpm >> Infinitely variable feed on all 3 axes Knsdsx Ig Dxjpfx Ah Aof >> Rapid traverse on all 3 axes >> Drive power: 2.0 / 4.0 kW >> Spindle brake >> Travel path X/Y/Z: 500/300/400 mm >> Vertical milling head transversely adjustable on spindle carrier: 200 mm >> Vertical and horizontal quill – SK40 mount, extendable >> Drawbar system: M16 >> Weight: approx. 1,500 kg Accessories & Features: >> 3-axis Heidenhain TNC113 active digital readout >> Coolant system >> Central lubrication system About the Machine: For sale is a universal milling machine Deckel FP3 in excellent condition. The machine has minimal backlash, and all spindles move smoothly. On this later FP3 model, the feed on all three axes is infinitely adjustable, plus there is rapid traverse for each axis. A major advantage is the active 3-axis digital readout. This Heidenhain path control allows you to enter measurements which are automatically executed by the machine. An oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital readout makes operation simpler and even more precise. You are welcome to view and test the machine under power on site. The machine is immediately available.

Leto izdelave: 1968, Stanje: dober (rabljeno), For sale is a Deckel milling machine from the year 1968. The machine is in good to very good condition and fully functional. (No digital readout, but can be added upon request) Technical data: - Tool holder: SK 40 - Travel X/Y/Z: 400 / 200 / 400 mm - Speed range: 40 - 2000 rpm - Vertical spindle travel: 60 mm - Horizontal spindle travel: 100 mm - Feeds: 8 - 400 mm/rev - Table size: 700 x 330 mm Kodpfx Ahoihf Eto Asnf - Motor power: 2.2 kW - Connection: 400 V / 16 A plug - Weight: approx. 1300 kg All prices plus VAT Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or are you looking to sell yours? For more information or to contact us, please visit our website.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 400 mm, pomik po osi Z: 400 mm, hitrost vretena (min.): 50 obr/min, največja hitrost vretena: 4.500 obr/min, For sale is a machining center from Deckel Maho, model DMU 50 M, with path control and manual rotary axes. The machine is in very good condition, fully functional, and ready for immediate use. A special feature is the ability to operate in an open enclosure. Technical specifications: Year of manufacture: 2002 Control: Heidenhain TNC 124 X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Feed rate: 5,000 mm/min Rapid traverse: 5 m/min Tool holder: SK 40 Knodpfxeu Unh Io Ah Asf Clamping surface: Ø 700 x 500 mm Rotation range: 360° (mechanical) Swivel range: +90/ -15° (mechanical) Max. load: 200 kg Required space: 4,000 x 3,500 x 2,518 mm Transport dimensions: approx. 2,500 x 1,520 x 2,200 mm Weight: 2,600 kg Additional tool holders available upon request. Transport and loading can be organized across Europe for an additional charge upon request. Prices plus VAT. Inspection possible by appointment. Please contact us—our team looks forward to assisting you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Stanje: dober (rabljeno), For sale is a Deckel FP2 with rapid traverse milling head (V-belt drive with gear ratio). The machine was only used for copper and graphite machining, and therefore has not been heavily used. The machine is ready for immediate operation and fully functional. Retrofitting with a digital readout is possible for an additional charge. The machine can also be sold without the milling head. Dividing head NOT included. Accessories available at extra cost. Tool holder: SK 40 Travel (X/Y/Z): 400 / 200 / 400 mm Speed range: 40 - 2000 rpm Vertical spindle stroke: 60 mm Horizontal spindle stroke: 100 mm Feed rates: 8 - 400 mm/rev Table size: 700 x 330 mm Motor power: 2.2 kW Knsdpolz R Iwefx Ah Ajf Connection: 400 V / 16 A plug Weight: approx. 1300 kg All prices plus VAT. Machine Trade – Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, please visit our website.

Stanje: rabljeno, Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, dolžina mize: 680 mm, širina mize: 380 mm, višina mize: 345 mm,