Deckel Fp 3 nakup rabljenega (704)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, CNC vertikalno obdelovalni center „DECKEL MAHO M 1“ Opremljen s krmilnikom Siemens 828 D Shop Mill Letnik izdelave: 2022 V uporabi od: 9/2023 Hodi: X 550 mm, Y 550 mm, Z 510 mm Območje vrtljajev: 20 – 12.000 vrt/min, brezstopenjsko S sledečo dodatno opremo: Fiksna kotna miza, velikost 850 mm x 650 mm Vertikalni menjalnik orodij z 24 mesti (SK 40) IKZ 20 bar Elektronsko ročno krmiljenje 3D merilna sonda Renishaw PP 40 Merjenje dolžine orodja Renishaw TS27R Kabina za popolno zaščito s drsnimi vrati in notranjo osvetlitvijo Naprava za hlajenje Lsdoz A D Dmjpfx Al Djrt Transportni sistem za odrezke Sesalnik za oljne pare Pištola za brizganje hladilnega sredstva 3 kosi nastavljivih strojnih podstavkov Navodila za uporabo STROJ JE V ODLIČNEM STANJU!

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, F729 Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed Very good CONDITION Technical Data: >> Year of manufacture: 1992 >> Machine number: 2102-6289 >> Rigid angular table (freshly planed) >> Spindle speed: 40–2000 rpm >> Stepless feed in 3 axes >> Rapid traverse in 3 axes Lsdpou T D Nrofx Al Dort >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable 100 mm on spindle carrier >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Features: >> 3-axis Heidenhain TNC113 digital display >> Coolant system >> Operating manual, spare parts diagram About the machine: For sale is a Universal Milling Machine Deckel FP1, year 1992, in very good condition. The machine has minimal backlash and all slides move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed on all three axes is infinitely variable, and the machine also features rapid traverse in these axes. A significant advantage is the active 3-axis digital readout. With this Heidenhain DRO, you can enter dimensions and the machine will automatically move to them. The FP1 was previously used in a training facility and was only occasionally operated. Oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. You are welcome to inspect and test the machine under power at our premises.

Stanje: rabljeno, Leto izdelave: 1976, x-travel 350 mm y-travel 150 mm z-travel 340 mm Table clamping surface 600 x 210 mm Spindle taper SK 40 Spindle speeds 40 - 2000 rpm Feeds 5 - 500 mm/min Rapid traverse 1.2 m/min Total power requirement 1.9 kW Lodpfxewwwr Eo Al Djrt Machine weight approx. 0.7 t - Machine from training workshop - Accessories: fixed table, vertical head with extendable quill, 3-axis HEIDENHAIN digital readout, various short and long arbors, various collets, original DECKEL tool cabinet

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Prodaja stroja DECKEL FP1 z obsežno dodatno opremo in originalnimi navodili za uporabo, v odlično ohranjenem stanju. Lsdpozr E D Njfx Al Dert

Leto izdelave: 1980, stanje: zelo dobro (rabljeno), Stroj Deckel FP1, v zelo dobrem stanju. Specifikacije: - Os X: 300 mm Lrsdpfx Alskuynue Dot - Os Y: 160 mm - Os Z: 340 mm - vpenjalna glava ISO 40 - območje vrtljajev: 40–2000 vrt/min - mere: 1200 x 1100 x 1800 mm - teža: približno 800 kg Dodatna oprema: - Heidenhain TNC 113, digitalni nadzor za 3 osi - vrtljiva/nagibna miza - spremenljiva podaja za osi X in Z - hlajenje

Stanje: pripravljen za uporabo (rabljen), POKROV CNC-STROJ ZA FRÉZANJE Z NADZOROM CONTOUR 2 TIP: FP 4 MA ŠTEVILKA STROJA: 2204 - 1679 Lodpfozrmkdox Al Dort LETNIK: 1988 Delovni obseg: Osn X (vzdolžna) avtomatsko/ročno 485 / 500 mm Osn Y (prečna) avtomatsko/ročno 385 / 400 mm Osn Z (navpična) avtomatsko/ročno 380 / 400 mm Oprema: - Standardna oprema - Kotna miza 460 x 800 mm - Navpična glava za frézanje, pomična, SK40/M16 - Hidravlična primež - Avtomatski vpenjalnik orodja - Avtomatsko centralno mazanje - Elektronsko ročno kolo - Strojna luč - Posoda za odrezke - Zaščitna kabina - Naprava za hlajenje - Različne vpenjalne priprave - Dokumentacija Stanje: delujoče, možno prikazati v delovanju

Stanje: zelo dobro (rabljeno), Leto izdelave: 1986, Os X: 500 mm Os Y: 400 mm Os Z: 400 mm Oprema za orodje: SK 40 Moč pogona: 8,1 kW Vključno z digitalnim prikazovalnikom Heidenhain za 3 osi Lrodpfxozkhubs Al Djt Vključno z različnimi orodji Vključno z strojno objemko Vključno z vrtljivo mizo Vključno z dodatno nagibno glavo za rezkanje

Stanje: rabljeno, Flat belt pulley, toothed pulley, multi-belt pulley -Spare part from: a Deckel machining center, type FP3A -Diameter: 80 mm -Bore: 28 mm -Dimensions: 80/80/H61 mm Lrjdoffh Nzspfx Al Det -Weight: 1.2 kg

Stanje: pripravljen za uporabo (rabljen), Orodjarna rezkalni stroj DECKEL FP 1 vklj. z delilno glavo - Pomiki X/Y/Z 245x150x340 mm - Brez vertikalne glave / stroj je bil uporabljen le za horizontalno rezkanje Lrsdpfx Aloza Uf Ts Det - Območje vrtljajev 95 - 1900 vrt/min - Delilna glava - Avtomatski podaji na X & Y osi - Različne vpenjalne puše / nosilci orodja - Dokumentacija Dimenzije: D x Š x V 1,1x0,9x1,6 metra / Teža 600 kg Pridržujemo si pravico do napak in vnosnih napak

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Heidenhain TNC 620 control system Travel paths X/Y/Z: 1035/560/510 mm, Spindle speed: 12,000 rpm, Tool magazine for 30 tools, SK 40, Lsdpfx Aezfx T Dsl Dert Coolant through spindle, 12 bar, Chip conveyor

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 400 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 50 obr/min, poteza s peresom: 90 mm, Dear Sir or Madam, We are pleased to offer you a very well-maintained Deckel FP4M (K) active milling machine featuring a rotary-tilt-swivel table and 4-axis digital readout. With its comprehensive equipment, this model stands out as a real highlight among conventional machine tools. The machine has been thoroughly inspected in our workshop, is in excellent condition, and is immediately ready for operation. We look forward to your inquiry! Delivery time: Available immediately Machine No.: xxxx-xxxx Year of manufacture: xxxx Table design: Rotary-tilt-swivel table Spindle speed: 50 - 2500 rpm Feed rate: 8 - 630 mm/min, infinitely variable Rapid traverse: 1300 mm/min Drive power: 3.7 kW / 4.4 kW Rapid traverse: 1300 mm/min Travel X/Y/Z: 500/400/400 mm Tool holder: SK40 Drawbar system: hydraulic Vertical quill stroke: 90 mm Weight: approx. 1600 kg Further features and accessories include: 4-axis Heidenhain digital readout, 3-axis active control, hydraulic tool clamping, rotary-tilt-swivel table, coolant system, leveling feet, operating manual, and much more upon request... Our service promise to you: Ledpovvtlgofx Al Djrt - We are a certified master workshop in mechanical engineering - All machines are thoroughly checked - All lubricants and, if necessary, worn parts are replaced in advance - On request, we offer a complete or partial overhaul of the selected machine - You are free to choose the paint color of your selected machine - Upon request, you can order additional accessories such as tools directly - If desired, we can install further accessories such as safety devices - We are happy to take care of shipping and/or installation as well

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 500 mm, pomik po osi Z: 450 mm, največja hitrost vretena: 5.000 obr/min, hitrost vretena (min.): 2 obr/min, dolžina mize: 900 mm, širina mize: 530 mm, vrsta vhodnega toka: trifazni, skupna dolžina: 900 mm, skupna širina: 530 mm, največja hitrost vrtenja: 5.000 obr/min, vrtljajska hitrost (min.): 2 obr/min, trajanje garancije: 3 meseci, delovno območje: 900 mm, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Ponujamo popolnoma obnovljeno orodno rezkalno napravo Deckel FP 4-60T z upravljanjem Dialog 11, letnik 1992. Deckel: FP 4-60T Stanje: popolnoma obnovljeno Menjalec orodij: 24 mest Krmiljenje: Dialog 11 Lrsdpfsx Sv Ubox Al Det Za dodatna vprašanja ali več informacij nam pišite ali nas pokličite.

Stanje: rabljeno, Rotary encoder, tachometer, encoder - Spare part removed from: Deckel machining center, type FP3A - Quantity: 1 tachometer available - Price: per piece - Dimensions: 83 x 122 x H95 mm - Weight: 1.1 kg Lodpfx Aloffh N Ae Dsrt

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP4M with 3-Axis Heidenhain Digital Readout, Special Light Grey Paint, CE Compliant! Technical Data: >> Year of manufacture: 1987 Machine no. 2203-2790 >> Fixed angular table (newly planed) >> Spindle speed: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head adjustable on spindle carrier, 150 mm >> Vertical and horizontal quill - SK40 taper >> Vertical quill travel: 90 mm >> Drawbar system M16 >> Weight approx. 1500 kg Accessories and Equipment: >> 3-axis Heidenhain digital readout >> Coolant system >> Chip tray >> Central lubrication About the machine: For sale is a Deckel FP4M universal milling machine, CE compliant and in very good condition. The machine is partially overhauled, has minimal backlash, and all spindles move smoothly and evenly. The milling machine runs quietly even at maximum speed. Rapid traverse is available on all axes, and all bellows are new. The fixed angular table has been newly planed. A reliable and user-friendly machine. Oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the machine under power on site. Lredpfxexctyas Al Djt

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP2 in Special Light Grey Paint with New 3-Axis K+C Digital Display Technical Data: Lrodpfx Alsu I Rm Ne Det • Mach. No. 5983, Year of manufacture approx. 1975 • Rigid angle table (newly refurbished) • Speed range: 40 - 2000 rpm • Feed and rapid traverse on 3 axes • Drive power: 2.2 kW • Travel X/Y/Z: 400/200/400 mm • Equipment: Vertical & horizontal spindle • Extendable vertical and horizontal quill - SK-40 taper • Drawbar system: S20x2 • Weight approx. 1,100 kg Accessories and Features: • 3-axis K+C digital readout, newly installed with manufacturer's warranty Display features: set reference points, set zero points, input coordinates, switch mm/inch, absolute or incremental coordinates, circle functions, hole patterns, radius milling functions, etc. • User manual for digital readout • Coolant system About the machine: For sale is a Deckel FP2 universal milling machine in good condition. The Deckel has very little backlash and all spindles move smoothly. The machine has been completely dismantled and newly painted. An oil change has been carried out. Mechanically and electrically tested. The K+C digital readout makes work easier and even more precise. Additionally, you receive a 1-year warranty on the new digital readout. Take the opportunity to view and test the Deckel on site under power. The machine is available immediately.

Stanje: rabljeno, Leto izdelave: 1978, X-travel 300 mm y-travel 160 mm Ljdpowl N R Nsfx Al Dsrt z-travel 340 mm Clamping surface of table 600 x 210 mm Spindle taper SK 40 Spindle speeds 40 - 2000 rpm Feeds 5 - 500 mm/min Rapid traverse 1.2 m/min Total power requirement 1.9 kW Machine weight approx. 0.7 t - Machine from training workshop - Accessories: fixed table, vertical head with extendable quill, digital readout on 3 axes HEIDENHAIN, counter bearing, various short and long milling arbors, various collets, original DECKEL tool cabinet

Stanje: dober (rabljeno), Leto izdelave: 1998, obratovalne ure: 13.143 h, Funkcionalnost: popolnoma funkcionalen, nazivna (navidezna) moč: 22 kVA, proizvajalec krmilnikov: Siemens, model krmilnika: Sinumerik, vhodna napetost: 400 V, Naprodaj je še eno CNC-vertikalno obdelovalno središče DECKEL MAHO DMC 63 V, izdelano leta 1998, rabljeno in v dobrem stanju, glede na starost. Stroj je v delovnem stanju in si ga lahko po dogovoru ogledate vključeno v električno omrežje. • Letnik izdelave: 1998 • Upravljalni sistem: Siemens Sinumerik • 4. os s pripomočkom za vpenjanje • Revija za orodja • Hladilni sistem • Delovni čas: približno 13.143 ur v enosmenskem delovanju Omrežna napetost: 400 V Frekvenca: Hz Nazivni tok: 17 A Očitna moč: 22 kVA Pomožna napetost: 230 V Upravljalna napetost: 24 V Tip: DMC 63 V Serijska številka: A0883 Lodpjz Dplfjfx Al Dert Številka stroja: 999-d-076 Če imate dodatna vprašanja ali potrebujete več informacij, nam pišite ali nas pokličite.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-axis Heidenhain Digital Readout, Original Condition!!! Technical Data: >> Machine No. 56560/08, year of manufacture approx. 1975 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm Lrjdpfxsu Nvxme Al Det >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill SK40 >> Drawbar system: S20x2 >> Weight approx. 700 kg Ecvf9Jfv9 Accessories and Equipment: >> 3-axis Heidenhain digital readout >> Coolant system About the machine: Offered here is a universal milling machine Deckel FP1 in very good original condition. The Deckel has minimal backlash in the handwheels and all spindles move smoothly. An oil change has been carried out. Mechanically and electrically checked. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the Deckel under power on site.

Stanje: dober (rabljeno), Leto izdelave: 1987, potovalna razdalja osi X: 500 mm, pomik osi Y: 400 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 2.500 obr/min, skupna višina: 2.100 mm, skupna širina: 2.100 mm, skupna dolžina: 2.200 mm, skupna masa: 1.800 kg, teža obdelovanca (maks.): 400 kg, Stroj za obdelavo z rezalnikom Deckel - FP4M ID stroja: 9649 Proizvajalec: Deckel Tip: FP4M Digitalni prikazovalnik za 3 osi Aktivni digitalni prikazovalnik Fiksna miza 800 Centralno mazanje Naprava za hlajenje z črpalko Os X: 500 mm Os Y: 400 mm Os Z: 400 mm Dolžina mize: 800 mm Širina mize: 460 mm Nosilnost mize: 400 Število vrtljajev vretena: 2500 vrt/min Podajalna hitrost osi X: 1300 mm/min Podajalna hitrost osi Y: 1300 mm/min Podajalna hitrost osi Z: 1300 mm/min Gib pinole: 90 mm Dolžina: 2200 mm Širina: 2100 mm Lrsdpfx Alszdf Efe Det Višina: 2100 mm Teža: 1800 kg Prosimo, upoštevajte: Informacije na tej strani so bile pridobljene po najboljših močeh in vesti, pri čemer smo, kolikor je bilo mogoče, upoštevali tudi podatke proizvajalca. Informacije so podane v dobri veri, vendar natančnost ni mogoče zagotoviti. Posledično ne predstavljajo nobene izjave ali pogodbenih pogojev. Priporočamo vam, da preverite vse pomembne podrobnosti.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, - RABLJEN - 3-OSNO VERTIKALNO OBSTRALNO CENTR HOD OSI X: 635 mm HOD OSI Y: 510 mm HOD OSI Z: 460 mm HITROST PODAJANJA OSI X-Y-Z: 30 m/min VRATENJE: 10000 vrt/min; 9–13 kW; 57–83 Nm; SK-40 VELIKOST MIZE: 790 x 560 mm NAJVEČJA DOVOLJENA OBOREN: 600 kg MENJALNIK ORODIJ: KOŠARICE; 20 položajev NAJVEČJI PREMER ORODJA: 80 (130) mm NAJVEČJA DOLŽINA ORODJA: 300 mm Lrjdezlu S Nepfx Al Dot NAJVEČJA TEŽA ORODJA: 6 kg NADZORNA ENOTA: HEIDENHAIN iTNC 530 TEŽA: 3650 kg ZUNANJE DIMENZIJE: 3375 x 2440 x 2665 mm DODATNA OPREMA: TRANSPORTER STROGANJA; PRENOSNO ROČNO KRMILJENJE

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, obratovalne ure: 13.362 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.035 mm, pomik osi Y: 560 mm, pomik po osi Z: 510 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 30 m/min, hitri pomik na osi Z: 30 m/min, dolžina podajanja os X: 1.035 mm, dolžina pomika po osi Y: 560 mm, dolžina podajanja os Z: 510 mm, nazivna (navidezna) moč: 17 kVA, vrtilni moment: 83 Nm, proizvajalec krmilnikov: Siemens 810D, skupna višina: 2.758 mm, skupna dolžina: 3.137 mm, skupna širina: 3.355 mm, širina mize: 560 mm, dolžina mize: 1.200 mm, obremenitev mize: 1.000 kg, skupna masa: 4.250 kg, hitrost vretena (min.): 20 obr/min, največja hitrost vretena: 8.000 obr/min, delovne ure vretena: 13.362 h, število mest v zalogovniku orodij: 20, dolžina orodja: 300 mm, premer orodja: 80 mm, teža orodja: 6.000 g, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, - Leto izdelave: 2010 - Stanje: dobro, rabljeno - Krmiljenje: Siemens 810D - Miza: 1200 x 560 mm - Hodi: 1.035 x 560 x 510 mm Lredpfoyf Hymjx Al Dst - Hitrosti vretena: 20 - 8.000 min⁻¹

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, F736 Universal Milling Machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 retrofit by FA Huttelmaier Very good CONDITION Technical Specifications: - Year of manufacture: 1985, Machine no. 2102-2891 - Fixed angle table - Spindle speed: 40 – 2000 rpm - Infinitely variable feed on 3 axes - Rapid traverse on 3 axes - Drive power: 1.5 / 1.9 kW - Spindle brake - Travel (X/Y/Z): 300 / 160 / 340 mm - Vertical milling head movable 100 mm on column - Vertical and horizontal quill – ISO 40 taper - Drawbar system S20x2 - Weight approx. 800 kg Accessories & Equipment: Ledpfx Aleu Nvwve Dort - 3-axis digital readout Heidenhain TNC111 - Coolant system - Operating manual, spare parts diagram About the machine: Offered here is a universal milling machine Deckel FP1, year 1985, in very good condition. The FP1 was overhauled in 2008 by the company Huttelmaier. The machine has minimal play on the handwheels and all leadscrews move smoothly. Even at maximum speeds, the milling machine runs very quietly. On this newer FP1 model, feed is continuously variable on all three axes and, in addition, the machine features rapid traverse on all axes. A major advantage is the active 3-axis digital display. With this Heidenhain path control, you can enter dimensions which the machine automatically moves to. The FP1 was located in a training workshop and was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this gem on site under power.

Stanje: pripravljen za uporabo (rabljen), Na voljo je CNC 3-osni univerzalni rezkalni stroj Deckel (DMG Mori). Pomik X/Y/Z: 1200mm/600mm/500mm, vpenjalni sistem orodja: SK40, hitrost vrtenja: 5000 obr/min, podajalna hitrost: 10m/min, hitri pomik: 10m/min, dimenzije mize X/Y: cca 1600mm/675mm, največja obremenitev mize: 2000kg. Dimenzije stroja X/Y/Z: cca 3300mm/2400mm/2400mm, teža: cca 7000kg, krmilje: Grundig Dialog 11. Ogled na lokaciji je možen. Lrodeycwq Djpfx Al Det

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1986, dolžina podajanja os X: 580 mm, dolžina pomika po osi Y: 400 mm, dolžina podajanja os Z: 450 mm, največja hitrost vretena: 2.500 obr/min, Grunding Contour 2 miza 800x460 mm hodi 580x400x450 mm maksimalna hitrost vretena 2500 min⁻¹ vreteno tip 40 Lrsdpfxsy E N Dvo Al Dot

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, potovalna razdalja osi X: 1.035 mm, pomik osi Y: 560 mm, pomik po osi Z: 510 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: iTNC 530, največja hitrost vretena: 8.000 obr/min, moč vretenovega motorja: 13.000 W, število mest v zalogovniku orodij: 20, število osi: 3, Ta 3-osna obdelovalna naprava tipa DECKEL MAHO DMC 1035 V je bila izdelana leta 2007. Ima hod 1.035 mm v osi X, 560 mm v osi Y in 510 mm v osi Z. Naprava je opremljena s sistemom za avtomatsko menjavo orodij z 20 položaji in deluje pri vrtljajih vretena od 20 do 8.000 vrt/min. Če iščete visokokakovostne možnosti obdelave, razmislite o vertikalnem obdelovalnem centru DECKEL MAHO DMC 1035 V, ki ga ponujamo v prodajo. Za dodatne informacije nas kontaktirajte. • Nadzor: Heidenhain iTNC 530, 3D-obdelava / 3D-konturna obdelava • Hitri premik: 30 m/min • Glavni pogon: AC 13/9 kW • Držalo orodja: ISO 40 / SK40 DIN 69871 • Vpenjalna sila orodja: DIN 69872 • Sistem za menjavo orodij: 20 položajev, SK40, dvojni oprijem • Velikost mize: 1.200 × 560 mm • Merilni sistem: Direktni merilni sistem X/Y/Z s pnevmatskim čiščenjem Lrjdpfx Ajzv Syljl Dst • Hladilno sredstvo / zračni curek: Preklapljanje preko funkcije M na šobah vretena • Način delovanja: Nadzor procesa z ročnim posegom • Programska oprema: Smart TNC, vključno z DZF in ciklom za graviranje • Komunikacija podatkov: DMG Netservice Euro ISDN • Delovni čas: 24.915,5 ur (nadzor vklopljen) / 12.002,7 ur (vreteno vklopljeno) Tehnične specifikacije Velikost stožca: ISO 40