Bernardo Kf 20 Super nakup rabljenega (209)

Stanje: novo, Drilling capacity in steel (diameter): 50.0 mm Throat depth: 360 mm Drilling stroke: 225 mm Morse taper: 4 MT Table size: 570 x 480 mm Tapping capacity in steel: M42 Speed range: 50-316 / 316-2200 rpm Feed: 0.08 - 0.50 mm/rev Column diameter: 180 mm Max. spindle-to-table distance: 580 mm Max. spindle-to-base distance: 1185 mm Total power requirement: 3.0 kW Weight: 630 kg Dimensions (LxWxH): 1020 x 750 x 2340 mm The gearbox column drilling machine GB 55 NC Vario is equipped as standard with stepless speed control, allowing optimal adjustment of cutting speed to the workpiece. Thanks to its heavy, solid construction, it is particularly well-suited for professional use in machine building and workshops. Features: - All settings are made directly via the large touchscreen display - Standard with motorized table height adjustment - 6 automatic drilling feeds selectable via electromagnetic clutch - Hand-scraped drilling table made of solid cast iron, swivel range: -45° to +45° - Ground base plate with T-slots - Designed for clamping extra tall workpieces - Guaranteed run-out accuracy = 0.02 mm, measured in the quill - Automatic tool ejector and tapping device as standard - High running smoothness thanks to ground, oil-bath-lubricated gearbox gears - Sturdy, ground steel column designed for heavy-duty use Scope of delivery: - Keyed drill chuck 1-13 mm / B16 - Drill chuck arbor MT 4 / B16 - Reducing sleeves MT 4/3, MT 4/2, MT 3/1 - Motorized table traverse - Coolant system - Touchscreen - Automatic tool ejector - Electromagnetic spindle feed - Tapping device - First fill with Shell Tellus 46 - LED machine lamp - Digital speed indicator - Digital drilling depth indicator Bwedpfx Amoxacc Sj Eew - Height-adjustable safety guard

Stanje: novo, Turning length 1000 mm Turning diameter 350 mm Turning diameter in gap 450 mm Spindle bore 40.0 mm Spindle speed 70 - 2000 rpm Bed width 180 mm Spindle mount 55029 D 1-4 Tailstock taper 3 MT Quill travel 110 mm Total power requirement 1.5 kW Machine weight approx. 529 kg Dimensions L-W-H 1730x700x1340 mm Features - Standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load - Infinitely variable speed control, set speed is shown on digital display - Ideal for technical schools, repair shops, and training workshops - Modern main spindle bearing with precision angular contact ball bearings - Single-lever clamp for tailstock, adjustable for taper turning - Hardened and ground gears and shafts in the gear head - Optimally suited for machining steel, non-ferrous metals, and plastics Bedpfow U U R Sox Am Ejww - Removable gap bridge for machining workpieces with a large diameter - The solid prism bed is additionally ribbed to minimize vibration influences - Simple, smooth, and precise operation of speed and feed settings Scope of delivery: - 3-axis digital readout i200 with LCD display - 3-jaw chuck DK11-160 mm / D4 - Faceplate 200 mm / D4, according to DIN 55029 - Fixed steady rest – max. passage diameter 60 mm - Travelling steady rest – max. passage diameter 60 mm - Clamping plate 250 mm - Four-way tool holder - Shaft locking device - Safety device on tool holder - Slip clutch - Micrometer longitudinal stop - Coolant system - Extendable chip tray - Frequency inverter - Foot pedal with brake function according to CE - Splash guard - Thread dial - LED machine light - Digital speed display - Reducing sleeve - Change gears - 2 centers - Floor stand - Operating tools

Stanje: novo, x-travel 1000 mm y-travel 360 mm z-travel 400 mm Spindle mount: ISO 40 Table: 1370 x 320 mm Feed rate: Horizontal 80 - 830 / Vertical 23-625 mm/min Spindle speed: Horizontal 35 - 1500 / Vertical 45 - 1660 rpm Distance spindle / table: Horizontal 30 - 430 / Vertical 210-610 mm Rapid traverse Z-axis: 750 mm/min Overhang: 305 - 805 mm T-slots: 3 x 14.0 mm Table - swiveling: ° Max. workpiece weight: 300 kg Coolant pump: 25.0 L/min Total power requirement: 7.6 kW Machine weight approx.: 1540 kg Bwjdpfxsxaagns Am Esw Dimensions (LxWxH): 1840 x 1830 x 2050 mm The universal milling machine UWF 130 Servo is a further development of the well-known UWF 130. Thanks to the milling head "HURON", which can be adjusted to any angular position, and a travel of 1000 mm on the x-axis, this machine is highly versatile. A special feature of this model is the rapid traverse and 8-step feeds on all axes, driven by a servomotor ("SERVO" version). - Large-sized rectangular guideways on y- and z-axis for increased stability - 8 automatic feeds and rapid traverse on all axes, driven by servomotor - Universal milling head, Huron system, adjustable to any angle position - Swiveling control panel with ergonomically positioned switches - Heavy cast iron machine base for vibration-free operation - High running smoothness due to hardened and oil-bath lubricated gear wheels - Overarm with clearly arranged gearbox for spindle speed adjustment - Digital position indicator for x-, y- and z-axis included as standard - Precision surface-machined cross table with T-slots Scope of delivery - 3-axis digital display ES-12 H with LCD display - Drawbar M16 - LED machine lamp - Feed for x-, y-, and z-axis - Coolant system - Counter bearing - Long milling arbor ISO 40 / 27 mm - Combination milling arbor ISO 40 / 27 mm - Coolant tray - Adjustable safety guard - Central lubrication for x-, y-, and z-axis - Operating tools

Stanje: novo, Turning length 3000 mm Swing diameter 660 mm Swing diameter in the gap 900 mm Swing diameter over cross slide 460 mm Spindle speed 25 – 1600 rpm Quill: 5 MT Quill travel 235 mm Spindle bore 105.0 mm Motor power 7.5 kW Spindle mount DIN 55029 D 1-8 Machine weight approx. 3,300 kg Dimensions 4,630 x 1,200 x 1,529 mm Features - Versatile applications in general engineering, production, and single-part manufacturing - Central, easy-to-use feed and threading control with lead and feed screw - Prism bed made of grey cast iron, induction-hardened and precision-ground - Modern main spindle bearing with precision angular contact roller bearings - Hardened and ground gears and shafts, including in the feed gearbox - Rapid traverse for longitudinal and facing operations as standard to reduce idle times - Large spindle bore (105 mm) for machining workpieces with large diameters - Smooth start-up thanks to mechanical multi-disc clutch - Electromechanical foot brake for reducing idle times Bwodpfx Amoxaahlo Eow - Outstanding metal removal rates even for facing operations - The machine bed is reinforced with strong ribs to stiffen the bed guideways and minimize vibration influences Scope of delivery - 3-axis digital readout ES-12 V with LCD display - Overload clutch - Rapid traverse (longitudinal and facing) - LED machine light - 3-jaw steel chuck PO3-315 mm / D8 - Face plate 450 mm - Fixed steady rest – max. aperture diameter 180 mm - Travelling steady rest – max. aperture diameter 120 mm - 2 live centers - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - First fill with Shell Tellus 46 - Coolant system - Quick-change tool post with 4 holders - Safety device for quick-change tool post - Change gears - Reducing sleeve - Chip guard/rear panel - Cable routing via energy chain - Operating tools

Stanje: novo, x-travel: 600 mm y-travel: 250 mm z-travel: 400 mm Spindle taper: ISO 40 Table: 1120 x 260 mm Feed rate: 24 - 402 mm/min Spindle speed: 45.0 - 1660 rpm Distance spindle/table: 175 - 520 mm Rapid traverse Z axis: 660 mm/min Overhang: 0 - 550 mm Total power requirement: 2.2 kW Weight of machine: approx. 1380 kg Dimensions LxWxH: 1570 x 1470 x 1660 mm The universal milling machine UWF 110 is suitable for performing light to medium-duty milling operations. Thanks to its high versatility and simple conversion, it can be successfully used in workshops for machining small and medium batch sizes. Equipment: - Universal milling head, adjustable to any angular position - Swiveling control panel with ergonomically positioned switches - Heavy-duty machine base made of cast iron for vibration-free operation - Dovetail guideways with adjustable gibs on all 3 axes - High running smoothness due to ground, oil-bath-lubricated gearbox gears - Positioning motor for Z axis included in delivery - Standard with automatic table feed on X and Y axes - Precisely surface-machined cross table with T-slots - Digital position display for X, Y, and Z axes included Bwsdpfexaa Hzsx Am Eow Scope of delivery: - 3-axis digital readout ES-12 H with LCD display - LED machine lamp - Coolant system - Central lubrication - Counter bearing - Long milling arbor 32 mm - Feed for X and Y axes - Positioning motor for Z axis - Coolant tray - Adjustable safety guard - Operating tools

Stanje: novo, Sheet thickness: 1.20 mm Throat depth: 270 (140) mm Roller center distance: 60.0 mm Total power requirement: manual Machine weight approx. 46.0 kg Space requirement approx. 600 x 250 x 500 mm Description: - 4 pairs of beading and flanging rolls included in the scope of delivery - For efficient production of various bead types - High precision due to precision-mounted shafts - Lower shaft with adjustable stop - Sturdy cast iron construction in a modern design - Extended application range thanks to 8 different, optionally available roll pairs - Upper shaft adjustable Scope of delivery: - 4 pairs of beading and flanging rolls - Workpiece stop - Roller wrench Bsdpexabmcsfx Am Eeww

Stanje: novo, Bernardo Universal Milling Machine UWF 80 E incl. 3-axis digital readout and Y-axis feed Technical Specifications Table size: 1000 x 240 mm Spindle taper: ISO 40 Vertical spindle speed: (8) 115 – 1750 rpm Horizontal spindle speed: (9) 60 – 1350 rpm Bodpod Erttjfx Am Esww Quill stroke: 125 mm Longitudinal travel (X): 590 mm Cross travel (Y): 180 mm Vertical travel (Z): 320 mm Distance spindle / table: 0 – 375 mm Overhang: 230 – 685 mm Table swiveling range: -45° to +45° Spindle head swiveling range: -90° to +90° Feed range, longitudinal: (8) 32 – 700 mm/min T-slot size: 16 mm Motor power, vertical: 0.85 / 1.5 kW Motor power, horizontal: 1.5 kW Machine dimensions (W x D x H): 1500 x 1430 x 2100 mm Weight approx.: 980 kg Scope of delivery • 3-axis digital readout ES-12 H with LCD display • Drawbar M 16 • LED machine lamp • Coolant system • Automatic table feed for X-axis • Automatic table feed for Y-axis • Adapter ISO 40/MK 3 • Adapter ISO 40/MK 2 • Adapter ISO 40/B 18 • Long milling arbor ISO 40/27 mm • Adjustable safety guard • Guard cover for horizontal milling • Horizontal support bearing

Stanje: novo, Turning length 1000 mm Swing diameter 360 mm Swing diameter over cross slide 220 mm Swing diameter in gap 502 mm Spindle bore 52.0 mm Spindle speed 70 - 2,000 rpm Bed width 185 mm Spindle mount 55029 D 1-5 Tailstock taper 3 MT Quill travel 100 mm Total power requirement 1.5 / 2.2 kW Machine weight approx. 575 kg Dimensions L-W-H 1825 x 750 x 1600 mm Features: - To minimize vibration influences, the solid prismatic bed is additionally reinforced with webs. - Standard 52 mm spindle bore for machining large shaft diameters. - Optimally suited for machining steel, non-ferrous metals, and plastics. - Removable gap bridge for machining large-diameter workpieces. - Space-saving installation thanks to forward-pull-out chip tray. - The speed and feed adjustment is simple, smooth-running, and precise. - Electromechanical foot brake to reduce auxiliary times. - Modern main spindle bearing with precision angular contact ball bearings. - Prismatic bed made of cast iron, induction hardened and precision ground. - Guaranteed spindle nose concentricity accuracy (= 0.009 mm). - Main spindle hardened and ground, running in an oil bath. - Tailstock, headstock, and all guides are adjustable. - Tailstock can be offset ±5 mm for taper turning. Scope of delivery: - 3-axis digital readout i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, according to DIN 55029 - Fixed steady rest – max. pass-through diameter 70 mm - Travelling steady rest – max. pass-through diameter 60 mm - Coolant system - Initial fill with Shell Tellus 46 - Pull-out chip tray - Clamping plate 280 mm - Four-way tool post Bwsdpfx Aoxaaz Eem Ejw - Safety device for four-way tool post - Slip clutch - Micrometer longitudinal stop - Thread dial indicator - LED machine lamp - Reducing sleeve - Change gears - 2 centre points - Foot pedal with brake function according to CE - Motor with magnetic brake according to CE standard - Base frame with drawers - Operating tools

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 38 mm, premer struženja nad ležiščem sani: 320 mm, stružna dolžina: 910 mm, skupna dolžina: 700 mm, skupna širina: 1.610 mm, skupna višina: 1.350 mm, največja hitrost vretena: 1.650 obr/min, hitrost vretena (min.): 65 obr/min, največji premer metrickega navoja: 6 mm, koraki metričnega navoja: 23, skupna masa: 272 kg, premer trikrake glave: 160 mm, The HOBBY 910 G lathe in its standard configuration features a leadscrew and a feed shaft for threading and, respectively, for automatic longitudinal and cross feeds. The 12-speed gearbox enables quick speed adjustments—without the need to change the V-belt. Thanks to its compact design and substantial weight, the machine ensures quiet yet extremely precise operation. Bjdpfsyn Amnsx Am Eeww -Easy and quick spindle speed change via gearbox -High concentricity thanks to precision ball bearings -High-power drive motor with high torque; spindle speed range: 65 - 1650 rpm -Wide range of applications: precision engineering, vocational and educational training centres, ... -Simple feed adjustment mechanism, smooth and precise shifting -Robust machine bed with induction-hardened and ground guideways -Optimal machine for machining steel, non-ferrous metals, and plastics -Standard equipment includes leadscrew for automatic longitudinal and cross feeds -Carriage with handwheels and precision scale Centres distance: 910 mm Centre height: 160 mm Swing over bed: 320 mm Bed width: 160 mm Spindle bore: 38 mm Spindle mount taper: MK 5 Spindle speed min.: 65 rpm Spindle speed max.: 1650 rpm Number of speeds / stepless: 12 Longitudinal feed range: 0.087 – 2.049 mm/rev Cross feed range: 0.019 – 0.444 mm/rev Metric thread pitch: (23) 0.25 – 6 mm Imperial thread pitch: 4 – 120 TPI Tailstock quill travel: 75 mm Tailstock taper: MK 3 Motor power: 1.5 kW Motor power S1 100%: 1.1 kW Voltage: 230 V Dimensions – width: 1610 mm Dimensions – depth: 700 mm Dimensions – height: 1350 mm Weight approx.: 272 kg Scope of delivery: 160 mm 3-jaw chuck Cross slide Fixed centre points Change gears Four-way tool post LED work lamp Chuck guard Chip tray Leadscrew cover Service tools Stand

Stanje: novo, Square steel 16 x 16 mm Flat steel 100 x 5 mm Angle steel 60 x 8 mm Round steel 18.0 mm Bedpfx Amjxcux Rs Eeww Machine weight approx. 33.0 kg Features: - For precise cold and hot bending of flat, round, and square steels - Robust design for bench mounting - Continuously adjustable bending stop with locking pin - With eccentric quick clamping for efficient work - Bend angle easily readable up to 120° - High repeatability thanks to bending angle stop - Ideal for repair workshops and metalworking shops Bending capacity (cold): Flat steel: 100 x 5 mm + 65 x 10 mm Round steel: 18.0 mm Square steel: 16 x 16 mm Angle steel: 60 x 8 mm Bending capacity (hot): Flat steel: 100 x 15 mm + 75 x 20 mm Round steel: 27.0 mm Square steel: 25 x 25 mm Angle steel: 100 x 12 mm Scope of delivery: - Sharp / round bending plate - Radius bending plate R 20 / R 25 - Offset block - Bending plate for round bar - Offset plate - Radius bending plate R 10 / R 15 - Angle stop - Clamping block with eccentric clamp - Material stop

Stanje: novo, Blechbreite 1050 mm Blechstärke 1.0 mm Bwedpfsxcuxwjx Am Ejw Öffnungsweite 95.0 mm Winkel verstellbar von - bis 0 - 150 Grad Gesamtleistungsbedarf manuell Maschinengewicht ca. 180 kg Abmessung L-B-H 1320 x 790 x 1050 mm Eigenschaften - Universell einsetzbare Biegemaschinen für Spenglereien und Reparaturbetriebe - Einfache Schwenkbewegung der Biegewange mittels Bügelgriff - Leichte Verstellung der Oberwange für rationelles Arbeiten - Hohe Oberwange zum Herstellen von hoch aufgekanteten Profilen - Durch Klaviereinsätze in der Ober-, Unter- und Biegewange ergibt sich eine große Anzahl von Biegemöglichkeiten - Kassetten und Spezialprofile mit entgegengesetzten Biegungen sind mit diesen Modellen leicht durchführbar Lieferumfang : - Segmentierte Ober- Unter- und Biegewange - Biegesegmente 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 2 x 250 mm

Stanje: novo, Cutting diameter: 225 mm Saw blade length: 2480 mm Table height: 910 mm Cutting range at 90° (flat): 245 x 150 mm Cutting range at 90° (square): 200 x 200 mm Cutting range at 45° (round): 160 mm Cutting range at 45° (square): 160 x 160 mm Cutting range at 60° (round): 100 mm Cutting range at 60° (square): 100 x 100 mm Speed range: 45/90 m/min Saw blade dimensions: 2480 x 27 x 0.9 mm Total power requirement: 1.5 kW Machine weight: approx. 200 kg Required space: approx. 1430 x 720 x 1700 mm Features: - Suitable for cutting profiles, tubes, and solid materials made of iron and non-ferrous metals - Saw bow can be swiveled up to 60° for miter cuts - Stepless lowering control via hydraulic descent cylinder - Torsion-resistant, heavy-duty saw arm made of cast iron - 2-band speeds for optimal cutting results (400 V) - Robust construction for smooth and low-vibration operation - Automatic cut-off after material is fully cut - Heavy-duty cast-iron vise with quick-release mechanism - Ball-bearing saw blade guide with quick adjustment to adapt to the workpiece width ensures optimal working results Scope of delivery: - Saw blade - Workpiece stop - Base frame - Pressure gauge for blade tension - Vise with quick-release mechanism Bwodpfx Amjxaa Tbs Eew - Coolant device - Hydraulic descent cylinder - Motor protection switch - Automatic cut-off

Stanje: novo, Drilling capacity in steel (diameter): 50.0 mm Reach: 320 - 1,220 mm Workpiece height - max.: 330 - 1,170 mm Spindle speed: 25 - 2,000 rpm Spindle taper: MT 5 Base plate: 1,300 x 980 mm Thread cutting: M42 Quill stroke: 335 mm Total power requirement: 4.0 kW Machine weight approx.: 3,000 kg Dimensions (L x W x H): 2,035 x 1,000 x 2,830 mm Equipment/features: - Large-dimensioned base plate, ideal for machining large workpieces - Thick-walled, ground column for increased sliding properties of the arm - Arm and drilling head with independent hydraulic clamping - Simple height adjustment of the arm via lifting motor Bwsdpfx Amoxaaabs Eew - Ideal for drilling, countersinking, reaming, and thread cutting - Hardened and ground gears running in oil bath - Excellent sliding properties of the drilling head on the arm due to ground surface Scope of delivery: - Cube table - Drill chuck arbor MT 5 / B16 - Reducing sleeves MT 5/4, MT 4/3, MT 3/2 - LED machine lamp - Initial fill with Shell Tellus 46 - Coolant system - Lifting motor - Hydraulic motor - Operating tools - Height-adjustable safety cover

Stanje: novo, Drilling capacity in steel (diameter): 60.0 mm Arm reach: 350 - 1,600 mm Workpiece height - max.: 665 x 1,250 mm Spindle speed: 38 - 2,000 rpm Spindle taper: MT 5 Base plate: 960 x 1,760 mm Thread cutting: M42 Quill travel: 325 mm Total power requirement: 4.0 kW Machine weight approx.: 3,800 kg Dimensions (LxWxH): 2,600 x 1,100 x 2,770 mm Features: - Standard with stepless speed adjustment - Set spindle speed is displayed on a digital readout - Drill spindle with high concentricity accuracy Bwedpfjxaa H Usx Am Eow - Equipped with automatic spindle brake - Boom, drilling head, and column with independent hydraulic clamping - Large dimensioned base plate, ideal for machining large workpieces - Thick-walled, ground column for improved sliding characteristics of the boom - Easy height adjustment of the boom via lift motor - The position of the spindle remains unchanged, ideal for series work - Drill head and column can be clamped or released simultaneously via push button - Guideways on the boom are hardened and ground - Quill counterbalanced by counterweight - Ideal for drilling, countersinking, reaming, and thread cutting Scope of delivery: - Cube table - Drill chuck arbor MT 5 / B 16 - Reducing sleeves MT 5/4, MT 4/3, MT 3/2 - LED machine lamp - Initial fill with Shell Tellus 46 - Coolant system - Frequency inverter - Digital speed display - Lift motor - Hydraulic motor - Height-adjustable safety cover - Operating tools

Stanje: novo, Cutting capacity at 90° (round): approx. 100 mm Cutting capacity at 45° (round): approx. 65.0 mm Cutting capacity at 90° (flat): 100 x 150 mm Cutting capacity at 45° (flat): 60 x 100 mm Saw blade dimensions: 1470 x 13.0 x 0.65 mm Voltage: 230 V Band speed: 45.0 m/min Weight: 26.0 kg Dimensions (L x W x H): 700 x 320 x 420 mm The mobile bandsaw EBS 100 C is the ideal machine for on-site installation work on construction sites. Its smooth and vibration-free operation enables precise cuts. SOLVES MANY SAWING PROBLEMS ON THE CONSTRUCTION SITE Dry cutting (no coolant required) - Outstanding price-performance ratio thanks to a wide range of applications - Includes workpiece stop for efficient operation - Adjustable saw bow for mitre cuts up to 45° - Ideal for construction site use due to its low weight - Standard version includes integrated chip collection container - Optimum cutting results due to ball-bearing saw blade guide - Quick-release vice included in delivery Scope of delivery - Saw blade Bedpexaa Apofx Am Esww - Workpiece stop - Quick-release vice - Ergonomic handle - Chip collection container

Stanje: novo, Pressure: 30 t Stroke: 150 mm Table width: 185 mm Frame opening between guides: 530 mm Machine weight approx. 162 kg Space requirement approx. 800 x 700 x 1805 mm Equipment: - Hydraulic workshop press - Two adjustable speeds for piston advance - Operated by hydraulic pump Bwodpfsxabg Nox Am Esw - Powerful workshop presses for crafts and repair shops - Optimal price-performance ratio due to efficient design - Standard foot pedal keeps both hands free for handling the workpiece - Extended application range with the optionally available 10-piece pressing mandrel set - Pressure cylinder with integrated return spring for piston retraction - Welded steel frame for high stress resistance and stability - Versatile use thanks to pressure cylinder that can be shifted left and right

Stanje: novo, Bernardo GB 30 Vario Geared Head Drilling Machine Bjdjgd H Uuepfx Am Eeww Technical Specifications Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 35 mm Maximum tapping capacity: M22 Drill chuck: 1 - 13 mm / B 16 Morse taper: MT 3 Spindle speed / 2 ranges: 70 - 495 / 495 - 3500 rpm Feed rates: 0.1 / 0.2 / 0.3 mm/rev Throat depth: 280 mm Max. spindle-to-table distance: 650 mm Spindle-to-baseplate distance: 1120 mm Quill stroke: 125 mm Column diameter: 110 mm Table size / T-slot size: 450 x 380 mm / 14 mm Baseplate work area: 340 x 330 mm Motor output (S1 100%): 1.1 kW Motor input power (S6 40%): 1.5 kW Machine dimensions (W x D x H): 500 x 800 x 2100 mm Weight approx.: 320 kg Scope of delivery • Drill chuck arbor MT 3 / B 16 • Reducing sleeve MT 3 / 2, MT 3 / 1 • Keyed drill chuck 1 - 13 mm / B 16 • Coolant system • Electromagnetic spindle feed • Tapping device • Automatic tool ejector • LED machine lamp • Digital speed display • Initial fill with Shell Tellus 46 • Height-adjustable safety guard

Stanje: novo, Bernardo BF 45 HSV Drilling and Milling Machine Technical Specifications Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Maximum face mill diameter: 80 mm Throat depth: 280 mm Spindle speed (12 steps): 75 – 3200 rpm Spindle taper: MT 4 Quill travel: 120 mm Quill feed (3 steps): 0.10 / 0.18 / 0.26 mm/rev Bwedpfxegd H Uxe Am Eew Table size: 730 x 210 mm T-slot size: 14 mm Max. distance spindle/table: 640 mm Max. distance spindle/base plate: 1190 mm Travel (x / y): 495 / 200 mm Swivelling milling head: -90° to +90° Milling head height adjustment: 260 mm Column diameter: 115 mm Base plate working area: 365 x 375 mm Motor output S1 100%: 1.1 / 1.5 kW (400 V) Motor input S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H): 1070 x 800 x 2060 mm Weight approx.: 362 kg Scope of Delivery • Quick-release drill chuck 3 – 16 mm / B 16 • Drill chuck arbor MT 4 / B 16 • Drawbar M 16 • Reducing sleeve MT 4 / 3 • Combination shell end mill arbor MT 4 / 27 mm • Automatic quill feed • Height-adjustable safety guard • Digital quill stroke display • Thread cutting device • Coolant system • LED machine lamp • Longitudinal scale • Operating tools

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vrsta vhodnega toka: Enosmerni tok, Oprema: CE označba, The Bernardo HBS 275 is one of the most recognized and highly regarded bandsaw models in Europe. Within this machining range, it is undoubtedly the best choice. This is a precise bandsaw for universal applications: robust, rigid, and reliable. Features include a swiveling arm for miter cutting up to 60°, a dial-type tension gauge for precise blade tensioning, and a coolant system. Maximum cutting capacity is 225 mm round (245x150 mm flat). Key Features: - Optimal blade tensioning adjustment thanks to the dial-type tension gauge - Infinitely variable saw arm lowering via hydraulic cylinder with control valve - Durable, robust quick-release vice - Designed for cutting solid and hollow materials of various metals - 2-speed motor ensures optimal matching of power to the task - Double ball-bearing blade guides for perfect blade tracking - Solid frame and arm construction for high precision and minimal vibration - Automatic shut-off after cutting (limit switch) Technical Specifications: Cutting capacity round at 90°: 225 mm Bwjdpfoytr Hzox Am Esw Cutting capacity flat at 90°: 245 x 150 mm Cutting capacity square at 90°: 200 x 200 mm Cutting capacity round at 45° R: 160 mm Cutting capacity square at 45° R: 160 x 160 mm Cutting capacity round at 60°: 100 mm Cutting capacity flat at 60°: 100 x 100 mm Working height: 910 mm Blade dimensions: 2480 x 27 x 0.9 mm Blade width: 27 mm Cutting speed: 45 / 90 m/min Coolant pump power: 0.1 kW Motor power: 1.5 kW Motor power S1 100%: 1.1 kW Voltage: 400 V Dimensions (W x D x H): 1430 x 720 x 1700 mm Weight: approx. 190 kg Scope of delivery: - Bandsaw - Workpiece stop - Base - Blade tension gauge - Quick-release vice - Coolant system - Hydraulic cylinder - Emergency motor stop switch - Automatic limit switch

Stanje: novo, Tlak 50,0 t Hod 200 mm Bwodpfx Asxaa Ixom Eew Površina stola 730 x 205 mm Ugradna visina 75 - 1050 mm Prolaz između vodilica stuba 730 mm Težina mašine cca. 292 kg Dimenzije D-Š-V 1040 x 800 x 1880 mm Opis: - Standardno opremljen vitlom - Za jednostavno podešavanje visine radnog stola - Podešavanje klipa ručno ili pneumatski - Snažne radionicke prese za zanatske i servisne radionice - Odličan odnos cene i performansi zahvaljujući racionalnoj konstrukciji - Standardna nožna pedala omogućava slobodne ruke za rad na predmetu - Prošireno područje primene sa opcionim setom nastavaka za pritisak (10 delova) - Hidraulični cilindar sa integrisanom povratnom oprugom za povrat klipa - Zavareni čelični ram za visok nivo opterećenja i stabilnosti - Višenamenska upotreba zahvaljujući pomičnom hidrocilindru levo-desno

Stanje: novo, Drilling capacity in steel (diameter): 50.0 mm Throat depth: 370 mm Drilling stroke: 250 mm Morse taper: 4 MT Table: 600 x 500 mm Thread cutting: M 42 steel Spindle speed: 40 - 2100 rpm Feed: 0.1 - 0.4 mm/rev Column diameter: 200 mm Distance spindle/table max.: 600 mm Distance spindle/base plate max.: 1190 mm Total power requirement: 2.2 / 2.8 kW Weight: 670 kg Dimensions (L x W x H): 1020 x 750 x 2340 mm The GB 50 HS geared column drilling machine stands out due to its high drilling capacity of 50 mm, robust construction, and comprehensive standard equipment. This model is therefore ideally suited for use in industrial manufacturing and series production. Features - Motorized table lift to reduce non-productive times - Heavy-duty, vibration-free design for precise operation - Stable, precision-ground steel column for high load tolerance - Digital display for spindle speed and drilling depth - Solid cast iron table with rotatable and tiltable support surface - Increased cost-effectiveness thanks to extensive standard equipment - Hardened and ground gears ensure exceptionally smooth running - 4x automatic spindle feeds selectable via electromagnetic clutch - Standard with tapping device and automatic tool ejector Scope of delivery - Key-type drill chuck 1 - 13 mm / B 16 Bedpexaay Iofx Am Ejww - Drill chuck arbor MT 4 / B 16 - Reducing sleeves MT 4 / 3, MT 4 / 2 - Motorized table lift - Coolant device - Electromagnetic spindle feed - Tapping device - Automatic tool ejector - LED machine lamp - Initial fill with Shell Tellus 46 - Digital speed display - Digital drilling depth display - Height-adjustable safety cover

Stanje: novo, Bernardo Universal Lathe Master 360 Pro Centre Distance: 1000 mm Centre Height: 180 mm Swing Over Bed: 360 mm Swing Over Gap*: 502 mm Swing Over Cross Slide: 220 mm Bed Width: 185 mm Spindle Bore: 52 mm Spindle Mount: DIN 55029, D1-5 Speed Range (8 steps): 70 – 2000 rpm Longitudinal Feed Range (32): 0.052 – 1.392 mm/rev Cross Feed Range (32): 0.014 – 0.380 mm/rev Metric Threads (26): 0.4 – 7.0 mm Inch Threads (34): 4 – 56 TPI Quill Diameter: 42 mm Quill Travel: 100 mm Quill Taper: MT 3 Motor Output S1 100%: 1.5 kW (400 V) Motor Output S6 40%: 2.2 kW (400 V) Machine Dimensions (W x D x H): 1825 x 750 x 1600 mm Weight: approx. 576 kg *Removable bed gap length: 205 mm Scope of Delivery: - 3-axis digital readout i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Face plate 200 mm / D5, according to DIN 55029 - Fixed steady rest – max. workpiece diameter 70 mm - Travelling steady rest – max. workpiece diameter 60 mm - Coolant system - Initial fill with Shell Tellus 46 oil - Removable chip tray - Clamping plate 280 mm - Four-way tool post - Safety cover for four-way tool post - Slip clutch - Micrometer stop - Thread dial indicator - LED machine lamp - Reducing sleeve Bwodpfxed I H Izo Am Esw - Change gears - 2 centres - Foot pedal with brake function according to CE - Motor with electromagnetic brake according to CE standard - Base frame with drawers - Operating tools

Stanje: novo, Column Drilling Machine Bernardo GB 35 HSV with Coolant System Maximum drilling capacity: 32 mm Drill chuck: 1 – 16 mm / B16 Morse taper: MT 4 Spindle speed (12 steps): 75 – 3200 rpm Feed range: 0.10 / 0.18 / 0.26 mm/rev Throat depth: 295 mm Max. distance spindle/table: 775 mm Distance spindle/base plate: 1185 mm Quill travel: 125 mm Column diameter: 115 mm Table size: 500 x 455 mm T-slot size: 14 mm Base plate working area: 375 x 365 mm Motor output power S1 100%: 1.1 / 1.5 kW (400 V) Bwedpfx Amsd Hbwis Ejw Motor input power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H): 630 x 700 x 2050 mm Weight approx.: 340 kg Scope of delivery Quick-action drill chuck 1 – 16 mm / B16 Drill chuck arbor MT 4 / B16 Coolant system Reducing sleeve MT 4 / 3 Height-adjustable safety guard Digital drilling depth display Tapping device LED machine lamp Operating tools

Stanje: novo, Bernardo Vario Column Drilling Machine SB 40 Profi Technical Specifications - Maximum drilling capacity: 40 mm - Drill chuck: 1 – 16 mm / B18 - Morse taper: MK 4 - Infinitely variable spindle speed: 90 – 1455 rpm - Throat depth: 320 mm - Drill table swivels: -50° to +50° - Max. spindle-to-table distance: 590 mm - Spindle-to-base distance: 1155 mm Bsdpsd Hxk Nofx Am Eeww - Quill stroke: 160 mm - Quill feed per revolution: 0.1 / 0.2 / 0.3 mm/rev - Column diameter: 120 mm - Table size / T-slot size: 505 x 425 mm / 14 mm - Work area of base plate: 360 x 370 mm - Motor power: 1.0 / 1.5 kW - Machine dimensions (W x D x H): 500 x 930 x 1870 mm - Weight approx.: 380 kg Features - Variable drive for precise speed adjustment - Quill feed selectable via handwheel or mechanical feed - Easy tool change thanks to automatic tool ejector - Set speed easily and quickly readable via digital display - Heavy-duty, swivelling cast iron table with T-slots and coolant channel - Coolant system and lighting included as standard - Adjustable drilling depth stop, drilling depth readable via scale - Forward/reverse function for thread cutting Scope of delivery - Drill chuck arbor MK 4 / B18 - Coolant unit - Digital speed display - Quick-action drill chuck 1 – 16 mm / B18 - Reducing sleeves MK 4 / 3, MK 4 / 2, MK 3 / 1 - LED machine lamp - Automatic tool ejector - Height-adjustable safety guard

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 190 mm, izvrtina vretena: 40 mm, premer struženja: 350 mm, stružna dolžina: 1.000 mm, skupna dolžina: 700 mm, skupna širina: 1.730 mm, skupna višina: 1.340 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 70 obr/min, največji premer metrickega navoja: 7 mm, koraki metričnega navoja: 32, skupna masa: 272 kg, premer trikrake glave: 160 mm, The Standard 165 Top precision lathe features a robust construction and high functionality. Its extensive standard equipment makes it an exceptionally versatile model, including essential accessories such as a 3-axis digital readout, steady rests, LED work light, and CE-compliant safety guards. Additionally, the machine is supplied with a quick-change tool post system. - Ideal solution for toolmaking companies, vocational training workshops, and repair shops - Induction-hardened and ground cast iron bed - Easy and precise speed and feed adjustment via an ergonomically designed control panel - Standardly equipped with a leadscrew and feed shaft for threading and automatic feed - Convenient – one-handed tailstock clamping system, suitable for taper turning - Removable gap bridge for machining larger workpieces - Modern spindle bearings - Hardened and ground gears and shafts - Standard equipment includes: 3-axis digital display, LED lighting, and base - Foot brake significantly reducing downtime - Motor with electromagnetic brake, CE compliant - Standard front chip tray for easy swarf removal - Quick-change Multifix tool post system included Centres distance: 1000 mm Centre height: 175 mm Swing over bed: 350 mm Swing with gap bridge removed: 450 mm Swing over cross slide: 190 mm Bed width: 180 mm Spindle bore: 40 mm Spindle nose: DIN 55029, D1-4 Spindle speed min.: 70 rpm Spindle speed max.: 2000 rpm Number of spindle speeds/infinitely variable: 8 Longitudinal feed range (40): 0.053 - 1.29 mm/rev Bodpfx Amjyr Hnks Eoww Cross feed range (40): 0.013 - 0.31 mm/rev Metric threads (32): 0.4 - 7 mm Inch threads (36): 4 - 60 TPI Quill travel: 110 mm Tailstock taper: MK 3 Motor power: 2.2 kW Motor power S1 100%: 1.5 kW Voltage: 400 V Dimensions (W x D x H): 1730 x 700 x 1340 mm Weight approx.: 515 kg Scope of delivery: - 3-jaw chuck DK11-160 mm / D4 - 4-jaw independent chuck K72-200 mm / D4 - 3-axis digital display - Service tools - Fixed steady rest – max. workpiece passage 60 mm - Travelling steady rest – max. workpiece passage 60 mm - Faceplate 250 mm - Friction clutch - Micrometric longitudinal stop - Traverse system - Motor with electromagnetic brake (CE compliant) - Foot brake - Threading dial - LED lighting - Reducing sleeve - Change gears - 2 dead centres - Machine base - Partition - Multifix quick-change tool post system (4 tool holders included) - Legally required safety guards - Complete technical documentation (in Polish) - CE Certificate - 24-month warranty for all users with no extra charge