Bernardo Wb 100 nakup rabljenega (197)

Stanje: novo, Square steel 16 x 16 mm Flat steel 100 x 5 mm Angle steel 60 x 8 mm Minimum bending radius 190 mm Round steel 18.0 mm Machine weight approx. 33.0 kg. Features: - For precise cold and hot bending of flat, round, and square steels - Robust design for bolting to the workbench - Continuously adjustable bending stop with locking pin - With eccentric quick-clamping for efficient operation - Readable bending angle up to 120° - High repeat accuracy thanks to bending angle stop - Ideal for repair shops and metalworking shops Ijdpfxjxcux Rj Agpsa Bending capacity cold hot Flat steel 100 x 5 mm 100 x 15 mm 65 x 10 mm 75 x 20 mm Round steel 18 mm 27 mm Square steel 16 x 16 mm 25 x 25 mm Angle steel 60 x 8 mm 100 x 12 mm Scope of delivery: - Sharp / round bending plate - Radius bending plate R 20 / R 25 - Set-off block - Bending plate for round bar - Set-off plate - Radius bending plate R 10 / R 15 - Angle stop - Clamping block with eccentric clamp - Material stop

Stanje: novo, Technical Data: Band speed: 15 / 30 m/s Grinding diameter: 20 - 76 mm Carriage adjustment: 30° - 90° Flat grinding table: 400 x 100 mm Contact wheel ø x width: 195 x 100 mm Extraction port ø: 2 x 75 mm Speed: 1420 / 2660 rpm Motor power: 2.5 / 3.3 kW Dimensions (W x D x H), approx.: 750 x 1400 x 1200 mm Weight, approx.: 148 kg Features: - Consistent belt tension thanks to spring-loaded tensioning mechanism - Standard with round grinding device for diam. 20 - 76 mm - Quick and easy setting of the desired grinding angle - Graphite coating on the flat grinding surface improves the sliding properties of the abrasive belt - Large-sized flat grinding surface with protective cover - Low belt speed (15 m/s) ideal for grinding stainless steel and aluminium - User-friendly belt change, quick and straightforward - Fast and easy change of grinding rollers without tools - Various grinding angles from 30° to 90° possible without issue - Shorter processing times compared to milling Iodpjqvmqyefx Agpja Scope of supply: - Abrasive belt K 36 - Rubberised grinding roller - 1 pc. grinding roller for 1 1/4" (42/44 mm tube) - 2 pcs. foldable protective screens - Grinding and support table - 2 x dust extraction ports diam. 75 mm - 2 pcs. chip collection containers - Graphite coating - Motor protection switch

Stanje: novo, Bernardo Belt Grinding Machine KBR 100 x 2000 Duo Belt dimensions: 100 x 2000 mm Belt speed: 15 / 30 m/sec Min./max. tube diameter: 20 – 76 mm Carriage adjustment: 30° – 90° Surface grinding table: 400 x 100 mm Contact wheel Ø x width: 195 x 100 mm Extraction port Ø: 2 x 100 mm Speed: 1410 / 2850 rpm Motor output S1 100%: 2.2 / 2.8 kW (400 V) Motor input S6 40%: 3.0 / 4.0 kW (400 V) Machine dimensions (W x D x H): 750 x 1450 x 1160 mm Weight: approx. 158 kg Features • Consistent belt tension due to spring-loaded clamping device • Comes standard with tube grinding attachment for pipes with diameters from 20 – 76 mm • Quick and easy adjustment of the required grinding angle • Graphite backing on the surface grinding area enhances the glide characteristics of the abrasive belt • Large surface grinding area with protective cover • Low belt speed (15 m/sec) is ideal for grinding stainless steel and aluminium • User-friendly belt change, fast and uncomplicated • Quick and easy changing of grinding rollers without tools • Various grinding angles from 30° to 90° can be set without issue • Shorter processing times compared to milling Ijdjd Id Ubjpfx Agpea Scope of delivery • Abrasive belt K 36 • Rubberized grinding roller • 1 pc. grinding roller for 3/4" tube (26/28 mm tube) • 2 pcs. foldable safety guards • Tube grinding attachment • Grinding and support table • 2 x dust extraction nozzles, diameter 100 mm • 2 pcs. chip collection containers • Graphite backing • Motor protection switch

Stanje: novo, Biegeradius min. 190 mm Vierkantstahl 20 x 20 mm Flachstahl 100 x 7 mm Rundstahl 22,0 mm Winkelstahl 100 x 10 mm Abmessung L-B-H 900 x 430 x 310 mm Maschinengewicht ca. 33.0 kg. Eigenschaften - Zum exakten Kalt- und Warmbiegen von Flach-, Rund- und Vierkantstählen - Stabile Bauart zum Festschrauben auf der Werkbank - Stufenlos einstellbarer Biegeanschlag - Mit Exzenter-Schnellspannung zum rationellen Arbeiten - Ablesbarer Biegewinkel bis 120° - Hohe Wiederholgenauigkeit durch Biegewinkelanschlag - Ideal für Reparaturwerkstätten und Schlossereien Biegeleistung kalt warm Flachstahl 100 x 7 mm 100 x 15 mm 65 x 12 mm 75 x 20 mm Rundstahl 22 mm 27 mm Vierkantstahl 20 x 20 mm 25 x 25 mm Winkelstahl 100 x 10 mm 100 x 15 mm Lieferumfang - Biegeplatte - Winkelanschlag stufenlos - Klemmblock mit Exzenterspanner - Materialanschlag Isdpfoxcuyhsx Agpoa

Stanje: novo, Belt width: 100 mm Belt length: 2000 mm Belt speed: 15 + 30 m/sec Ijdpfxsxab Dzo Agpea Tube diameter: 20 - 76 mm Angle adjustable from 30° to 90° Extraction connection diameter: 2 x 75.0 mm Motor speeds: 1420 / 2660 rpm Flat grinding table: 400 x 100 mm Total power requirement: 2.5 / 3.3 kW Machine weight: approx. 148 kg Dimensions (L x W x H): 750 x 1400 x 1200 mm The KBR 100 x 2000 DUO is a multifunctional grinding machine for tube and profile end grinding at the front, for grinding edges, surfaces and for cylindrical grinding at the rear, as well as for flat grinding on the machine top. Features: - Constant belt tension via spring-loaded tensioning system - Supplied with cylindrical grinding attachment as standard - For grinding diameters of 20 - 76 mm - Quick and easy adjustment of the desired grinding angle - Graphite-coated flat grinding surface improves belt glide properties - Large flat grinding surface with protective cover - Low belt speed (15 m/sec), optimal for stainless steel and aluminium grinding - User-friendly belt change, quick and easy - Fast and easy tool-free change of grinding rollers - Various grinding angles from 30° to 90° possible without problems - Shorter machining times compared to milling Scope of delivery: - Abrasive belt K 36 - Rubberized contact roller - 1 piece grinding roller for 1 1/4" tube (42/44 mm tube) - 2 foldable safety screens - Grinding and support table - 2x dust extraction connections, diam. 75 mm - 2 chip collection containers - Graphite coating - Motor protection switch

Stanje: novo, Cutting capacity at 90° (round): approx. 100 mm Cutting capacity at 45° (round): approx. 65.0 mm Cutting capacity at 90° (flat): 100 x 150 mm Cutting capacity at 45° (flat): 60 x 100 mm Saw blade dimensions: 1470 x 13.0 x 0.65 mm Voltage: 230 V Band speed: 45.0 m/min Ijdpfx Ajxaa Apsgpea Weight: 26.0 kg Dimensions (L x W x H): 700 x 320 x 420 mm The mobile bandsaw EBS 100 C is the ideal machine for on-site installation work on construction sites. Its smooth and vibration-free operation enables precise cuts. SOLVES MANY SAWING PROBLEMS ON THE CONSTRUCTION SITE Dry cutting (no coolant required) - Outstanding price-performance ratio thanks to a wide range of applications - Includes workpiece stop for efficient operation - Adjustable saw bow for mitre cuts up to 45° - Ideal for construction site use due to its low weight - Standard version includes integrated chip collection container - Optimum cutting results due to ball-bearing saw blade guide - Quick-release vice included in delivery Scope of delivery - Saw blade - Workpiece stop - Quick-release vice - Ergonomic handle - Chip collection container

Stanje: rabljeno, Leto izdelave: 2015, Technical details: Swing diameter over bed: 420 mm Swing diameter over support: 255 mm Turning length: 1000 mm Swing diameter in gap: 580 mm Centre height: 205 mm Spindle bore: 52 mm Speed range: 30 - 550 / 550 - 3000 rpm (frequency controlled) / 2-step gearbox Feed rate (longitudinal): 0.05 - 1.7 mm/rev Feed rate (cross): 0.025 - 0.85 mm/rev Tailstock quill taper: MT 4 Tailstock quill travel: 120 mm Total power requirement: 5.5 kW Machine weight approx.: 1.5 t Dimensions (LxWxH) approx.: 2.1 x 1.1 x 1.5 m Thread cutting possible, e.g. metric and inch threads Iodpfevaxi Esx Agpja Stepless speed control 3-axis position display Sino SPSG-3V 3-jaw chuck NOLEX Ø 200 mm Multifix quick-change tool post size B Chuck guard (monitored) Chip guard Machine lighting Coolant system Accessories: 2x Multifix quick-change tool holders (1x fitted)

Stanje: novo, Bernardo Universal Lathe Solid 460 x 1000 Pro Vario Technical Specifications Centre distance: 1000 mm Centre height: 230 mm Swing over bed: 460 mm Swing over gap: 690 mm Swing over cross slide: 270 mm Bed width: 300 mm Spindle bore: 80 mm Spindle mount: DIN 55029, D1-8 Spindle speed range: 25 – 250 / 250 – 1700 rpm Iedpfjxl Tcajx Agpea Longitudinal feed range (42): 0.055 – 3.065 mm/rev Cross feed range (42): 0.025 – 1.386 mm/rev Metric threads (41): 0.1 – 14 mm Imperial threads (60): 2 – 112 TPI Tailstock quill diameter: 60 mm Tailstock quill travel: 130 mm Tailstock taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (L x W x H): 2300 x 1080 x 1600 mm Weight approx.: 1730 kg Features • Modern main spindle bearing with precision angular contact ball bearings • Standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control, set speed readable on digital display • Hardened and ground gears and shafts, including in the feed gearbox • Rapid traverse (longitudinal and cross) as standard to reduce idle times • Central, ergonomic controls for feeds and threading, with lead screw and feed shaft • Gears are large, hardened, and ground to precision • Speed and feed adjustment is simple, smooth, and precise • The machine bed is cast in one piece, extremely torsion-resistant and low-vibration, providing the basis for precise turning operations Scope of delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Fixed steady rest – max. passage diameter 150 mm • Travelling steady rest – max. passage diameter 110 mm • First fill with Shell Tellus 46 • Faceplate 450 mm • Quick-change tool post with 4 holders • Safety guard for quick-change tool post • Foot pedal with brake function according to CE • Coolant system • Frequency inverter • Safety slip clutch • Rapid traverse (longitudinal and cross) • Change gears • Reducing sleeve • 2 centre points • Thread dial indicator • LED machine light • Chip guard at rear • Operating tools

Stanje: novo, Leto izdelave: 2022, Band width: 150 mm Band length: 2260 mm Veneer sanding attachment: no Oscillation: yes Roller diameter: 115 mm Tilting sanding unit: yes / 90° - 0° Worktable: 750 x 250 mm Auxiliary table: 300 x 245 mm Iedpfx Agjha Nz Ropja Belt speed: 16.3 m/sec Extraction port: 100 mm Motor power: 3 kW / 400V Machine length: 1270 mm Machine width: 600 mm Weight: 120 kg

Stanje: novo, Turning length: 1000 mm Swing diameter: 460 mm Swing over cross slide: 270 mm Swing in gap: 690 mm Spindle bore: 80.0 mm Spindle speed: 25 - 1700 rpm Bed width: 300 mm Spindle mount: DIN 55029 D 1-8 Tailstock taper: MT 4 Quill travel: 130 mm Total power requirement: 5.5 kW Machine weight approx.: 1675 kg Dimensions (L x W x H): 2300 x 1080 x 1600 mm Iedpfxjxab H Ao Agpea Description: The Solid 460 Pro universal lathe is specifically designed for economical production of single parts and small series with high precision. Even the basic configuration includes all essential accessories, making this machine universally applicable. Scope of delivery: - 3-axis digital readout ES-12 V with LCD display - 3-jaw chuck PS3-250 mm / D8 - Face plate 450 mm - Coolant system - Initial filling with Shell Tellus 46 - Fixed steady rest, max. passage dia. 150 mm - Follow rest, max. passage dia. 110 mm - Quick-change toolpost with 4 tool holders - Safety guard for quick-change toolpost - Motor with electromagnetic brake to CE standard - Foot pedal with brake function to CE - Slip clutch - Rapid traverse longitudinal and cross - Change gears - 2 dead centers - Reducing sleeve - Thread chasing dial - LED machine lamp - Chip guard at rear - Operating tools

Stanje: novo, Bernardo Universal Lathe Smart 410 x 1000 Pro Vario Technical Specifications Centre Distance: 1000 mm Centre Height: 210 mm Swing Over Bed: 420 mm Swing Over Gap: 580 mm Swing Over Cross Slide: 255 mm Bed Width: 250 mm Spindle Bore: 52 mm Spindle Mount: DIN 55029, D1 – 6 Speed Range, 2 Steps: 30 – 550 / 550 – 3000 rpm Longitudinal Feeds (17): 0.05 – 1.7 mm/rev Cross Feeds (17): 0.025 – 0.85 mm/rev Metric Threads (42): 0.2 – 14 mm Imperial Threads (45): 2 – 72 TPI Quill Diameter: 50 mm Quill Travel: 140 mm Quill Taper: MT 4 Motor Power: 5.5 kW (7.5 HP) Machine Dimensions (W x D x H): 2090 x 1050 x 1600 mm Approx. Weight: 1145 kg Features • Supplied as standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control; set speed is shown on digital display • Prism bed made of cast iron, inductively hardened and precision ground • Central, user-friendly controls for feeds and threading via leadscrew and feed shaft • Modern main spindle bearing with precision angular contact bearings • Standard equipment includes frequency inverter and 3-axis digital readout • Hardened and ground gears and shafts, also in the feed gearbox • Speed and feed selection are simply designed, smooth, and precise to operate • Sliding tailstock for taper turning, handwheel with adjustable fine scale (0.02 mm) • Removable bridge allows machining of workpieces with large diameters Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw steel chuck PO3-200 mm / D6 • Face plate 350 mm • Fixed steady rest – max. passage diameter 135 mm • Travelling steady rest – max. passage diameter 65 mm • Foot pedal with CE brake function • Four-way tool post • Safety guard for four-way tool post • Micrometer longitudinal stop Iedpfx Agexl Tarspoa • Turret stop with fine adjustment • Frequency inverter • Initial filling with Shell Tellus 46 • Coolant system • Slip clutch • Thread dial indicator • LED machine lamp • Change gears • Reducing sleeve • 2 centre points • Chip guard • Operating tools

Stanje: novo, Turning length 1000 mm Swing diameter 380 mm Swing diameter over gap 490 mm Spindle bore 51.0 mm Spindle speed 70 - 2000 rpm Bed width 185 mm Spindle mount 55029 D 1-5 Tailstock taper 4 MT Quill travel 120 mm Total power requirement 1.5 / 2.2 kW Machine weight approx. 575 kg Dimensions (L x W x H) 1920 x 800 x 1660 mm Description: The Master 380 lead and feed screw lathe impresses with its sturdy construction and easy operation. Even the standard equipment includes all essential accessories (3-axis digital readout, steadies, LED machine lamp, CE-compliant safety features, etc.). Features: - 3-axis digital readout i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, according to DIN 55029 - Fixed steady rest – maximum bore diameter 70 mm - Traveling steady rest – maximum bore diameter 50 mm - Coolant system Iodpfsxabv Rex Agpsa - Initial filling with Shell Tellus 46 - Extendable chip pan - Clamping plate 320 mm - Four-way tool post - Guard for four-way tool post - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gears - 2 live centers - Foot pedal with braking function according to CE - Motor with magnetic brake according to CE standard - Base with drawers - Operating tools

Stanje: novo, Bernardo Universal Lathe Smart 410 x 1000 Pro Technical Specifications Centre Distance: 1000 mm Centre Height: 210 mm Swing Over Bed: 420 mm Swing Over Gap: 580 mm Ijdoxl Dx Espfx Agpsa Swing Over Cross Slide: 255 mm Bed Width: 250 mm Spindle Bore: 52 mm Spindle Mount: DIN 55029, D1 – 6 Speed Range (16): 45 – 1800 rpm Longitudinal Feed Range (17): 0.05 – 1.7 mm/rev Cross Feed Range (17): 0.025 – 0.85 mm/rev Metric Threads (42): 0.2 – 14 mm Inch Threads (45): 2 – 72 TPI Quill Diameter: 50 mm Quill Travel: 140 mm Quill Taper: MT 4 Motor Power: 3.0 / 4.5 kW Machine Dimensions (W x D x H): 2070 x 900 x 1600 mm Weight (approx.): 1220 kg Features • Prism bed made from grey cast iron, induction-hardened and precision ground • Electromechanical foot brake for reduced secondary times • Central, user-friendly control for feeds and threads with leadscrew and feed rod • Modern main spindle bearing arrangement with precision angular contact ball bearings • Oversized, hardened and precision-ground gears • Hardened and ground gears and shafts, also in the feed gearbox • Simple, smooth, and precise speed and feed adjustments • Adjustable, sliding tailstock for taper turning with handwheel featuring fine graduations (0.02 mm) • Removable gap bridge for machining large-diameter workpieces Scope of Delivery • Prism bed made from grey cast iron, induction-hardened and precision ground • Electromechanical foot brake for reduced secondary times • Central, user-friendly control for feeds and threads with leadscrew and feed rod • Modern main spindle bearing arrangement with precision angular contact ball bearings • Oversized, hardened and precision-ground gears • Hardened and ground gears and shafts, also in the feed gearbox • Simple, smooth, and precise speed and feed adjustments • Adjustable, sliding tailstock for taper turning with handwheel featuring fine graduations (0.02 mm) • Removable gap bridge for machining large-diameter workpieces

Stanje: novo, Centre distance: 1000 mm Swing diameter: 360 mm Swing diameter over gap: 480 mm Spindle bore: 51.0 mm Spindle speed: 70 - 2000 rpm Bed width: 185 mm Spindle mount: 55029 D 1-5 Tailstock taper: MT 4 Quill travel: 110 mm Total power requirement: 1.5 kW Machine weight approx.: 540 kg Dimensions (L x W x H): 1920 x 750 x 1600 mm Features: - Standard 51 mm spindle bore for machining large shaft diameters - Ideal for vocational schools, repair shops and training workshops - Optimally suited for machining steel, non-ferrous metals and plastics - Removable gap bridge for machining workpieces with large diameters - Space-saving setup due to chip tray extendable to the front - Speed and feed controls are straightforward, smooth-running and precisely switchable - Electromechanical foot brake for reducing non-productive time - Modern main spindle bearing with precision angular contact ball bearings - Precision-ground prism bed made from cast iron, inductively hardened - One-lever tailstock clamping, adjustable for taper turning - Guaranteed spindle nose runout accuracy (= 0.009 mm) - Main spindle hardened and ground, running in oil bath - Tailstock, headstock and all guides are adjustable Equipment: - 3-axis digital readout i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, per DIN 55029 - Fixed steady rest – max. pass-through diam. 70 mm - Travelling steady rest – max. pass-through diam. 50 mm - Coolant system - Initial fill with Shell Tellus 46 - Extendable chip tray - Clamping plate 320 mm - Four-way tool post - Safety device for four-way tool post Iodpfx Ajxaawajgpsa - Slip clutch - Micrometer longitudinal stop - Thread dial indicator - LED machine lamp - Reducing sleeve - Change gears - 2 centres - Foot pedal with brake function in accordance with CE - Motor with magnetic brake to CE standard - Machine base - Operating tools

Stanje: novo, Bernardo Universal Lathe Solid 460 x 1000 Pro Centre Distance: 1000 mm Centre Height: 230 mm Swing Over Bed: 460 mm Swing Over Gap: 690 mm Swing Over Cross Slide: 270 mm Bed Width: 300 mm Spindle Bore: 80 mm Spindle Mount: DIN 55029, D1-8 Speed Range: (12) 25 – 1700 rpm Longitudinal Feed Range: (42) 0.055 – 3.065 mm/rev Cross Feed Range: (42) 0.025 – 1.386 mm/rev Metric Threads: (41) 0.1 – 14 mm Imperial Threads: (60) 2 – 112 TPI Quill Diameter: 60 mm Quill Travel: 130 mm Quill Taper: MT 4 Motor Power: 5.5 kW (7.5 HP) Machine Dimensions (W x D x H): 2300 x 1080 x 1600 mm Weight approx.: 1675 kg Features: • Modern main spindle bearing with precision angular contact ball bearings • Hardened and ground gears and shafts, including feed gearbox • Central, user-friendly control for feeds and threads via leadscrew and feed rod • Large-dimensioned, hardened and precision-ground gears • Simple, smooth, and precise adjustment of speeds and feeds • Rapid traverse (longitudinal and cross) standard to minimize idle times • One-piece, ribbed bed casting highly torsion-resistant and low-vibration for high-precision turning operations Scope of Delivery: • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Face plate 450 mm • Coolant system • Initial filling with Shell Tellus 46 • Fixed steady rest – max. passage Ø 150 mm • Follow (travelling) steady rest – max. passage Ø 110 mm • Quick-change tool post with 4 holders • Safety guard for quick-change tool post • Motor with magnetic brake, CE compliant • Foot pedal with brake function, CE compliant Iedpsqwkd Uefx Agpoa • Safety slip clutch • Rapid traverse longitudinal and cross • Change gears • 2 centre points • Reducing sleeve • Thread dial indicator • LED machine lamp • Chip guard • Operating tools

Stanje: novo, Turning length 1000 mm Swing diameter 420 mm Swing over cross slide 255 mm Swing in gap 580 mm Spindle bore 52.0 mm Spindle speed 45 - 1800 rpm Bed width 250 mm Spindle mount DIN 55029 D 1-6 Tailstock taper 4 MT Quill travel 140 mm Total power requirement 3.0 / 4.5 kW Machine weight approx. 1220 kg Dimensions LxWxH 2070 x 900 x 1600 mm The universal lathe Smart 410 Pro is suitable for light and medium-duty turning operations. The standard equipment already includes all essential accessories (3-jaw chuck, steadies, change gears, ...), making this machine universally applicable. To reduce production times, this model comes equipped with a 3-axis digital readout as standard. Features - Prismatic bed made of grey cast iron, induction-hardened and precision-ground - Electromechanical foot brake to minimize non-productive times - Central, ergonomic controls for feeds & threads with leadscrew and feed shaft - Modern precision angular contact spindle bearings - Large, hardened and precision-ground gears - Hardened and ground gears and shafts, also in the feed gearbox - Easy, precise speed and feed adjustments - Sliding tailstock for taper turning - Handwheel with adjustable fine scaling (0.02 mm) - Removable gap bridge allows machining of large-diameter workpieces Equipment: - 3-axis digital readout ES-12 V with LCD display - 3-jaw chuck DK11-200 mm / D6 - Face plate 350 mm - Fixed steady – max. diameter 135 mm - Travelling steady – max. diameter 65 mm - Coolant system - Four-way toolpost - Safety guard for toolpost - Micrometer longitudinal stop - Overload slip clutch Iodpfexaavvex Agpja - Indexing stop with fine adjustment - Thread dial indicator - Motor with magnetic brake to CE standards - Foot pedal with brake function to CE - First fill with Shell Tellus 46 - LED machine lamp - Change gears - Reducing sleeve - 2 dead centers - Chip guard (rear) - Operating tools - Operation manual

Stanje: novo, Bernardo TM 16 BLO/ R 1100 Electric Tapping Machine Technical Specifications Tapping Capacity*: M3 - M16 Max. Speed: 120 - 325 rpm Adjustable Angle: 0° - 90° Max. Working Radius: R 1100 mm Quick-Change Chuck DIN 371: M3 / M4 / M5-6 / M8 / M10 DIN 376: M12 / M14 / M16 Motor Power: 600 W Voltage: 230 V Weight: approx. 26 kg * Material strength 400 N / mm2 Scope of Delivery Operation via touchscreen Digital drilling depth display Micro-spray system Chip blow-out device Quick-change holder Quick-change chuck according to DIN Electric motor 90° angle adjustment Mounting flange Features Standard with micro-spray system for consistent cooling and minimal coolant consumption Includes chip blow-out device for optimal visibility of the borehole Includes quick-change chuck for use with taps for through and blind holes Swiveling motor unit enables tapping at any desired angle between 0° and 90° Greater accuracy compared to manual tapping; threads are guaranteed perpendicular (90°) High productivity, significant time savings compared to manual tapping Quick-change chuck with integrated slip clutch prevents tap breakage Includes swing arm with large radius for easy positioning of the tap on the workpiece Iodpfx Agspag Npspsa For tapping in steel, stainless steel, aluminum, and non-ferrous metals Price: Base frame 900 x 600 mm with 2 drawers for TM-series 830.00

Stanje: novo, Turning length: 1000 mm Swing diameter: 400 mm Swing diameter over gap: 560 mm Spindle bore: 52.0 mm Spindle speed: 45 – 2,000 rpm Bed width: 210 mm Spindle mount: 55029 D 1-5 Tailstock taper: 4 MT Quill stroke: 100 mm Total power requirement: 2.0 / 2.4 kW Machine weight: approx. 810 kg Dimensions (LxWxH): 1,890 x 800 x 1,600 mm Description: - Optimally suited for machining steel, non-ferrous metals and plastics - Electromechanical foot brake to reduce non-productive times - Hardened and ground gears, also in the feed gearbox - Very user-friendly, robust machine with leadscrew and feed shaft - Prism bed made of cast iron, inductively hardened and precision-ground - Modern main spindle bearing with precision angular contact ball bearings - Machine base made of heavy cast construction - Tailstock can be offset ±5 mm for taper turning - Ideal for vocational schools, repair shops and training workshops - Simple, smooth and precise speed and feed adjustment - Space-saving installation thanks to front pull-out chip tray - Removable bridge for machining large diameter workpieces - Excellent price-performance ratio, modern design - Standard with integrated slip clutch Equipment: - 3-axis digital readout i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, according to DIN 55029 - Fixed steady rest – max. passage diameter 90 mm - Travelling steady rest – max. passage diameter 70 mm - Coolant system - Initial fill with Shell Tellus 46 - Pull-out chip tray - Mounting plate 320 mm - Four-way tool post - Safety device on four-way tool post - Slip clutch - Micrometer longitudinal stop - Thread dial indicator - LED machine light - Reducing sleeve Iedpfxexaau Se Agpea - Change gears - 2 dead centres - Foot pedal with braking function according to CE - Motor with magnetic brake, CE compliant - Operating tools

Stanje: novo, Bernardo Universal Lathe Master 400 x 1000 incl. 3-axis Digital Readout Special accessories: Multifix tool post head, 3 straight tool holders, 1 prism holder (EUR 672.00 net, not included in the price) Centre distance: 1000 mm Centre height: 200 mm Swing over bed: 400 mm Swing over gap: 560 mm Swing over cross slide: 240 mm Bed width: 210 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1-5 Spindle speed range: (12) 45 - 2000 rpm Longitudinal feed range: (27) 0.06 - 2.78 mm/rev Cross feed range: (22) 0.01 - 0.72 mm/rev Metric threads: (36) 0.8 - 14 mm Inch threads: (30) 2 - 28 TPI Quill diameter: 45 mm Quill stroke: 100 mm Quill taper: MT 4 Motor power: 2.0 / 2.4 kW Machine dimensions (L x W x H): 1860 x 800 x 1600 mm Weight approx.: 810 kg Scope of delivery: • 3-axis Digital Readout ES-12 V with LCD display • 3-jaw chuck DK11-200 mm / D5 • Faceplate 200 mm / D5, according to DIN 55029 • Fixed steady rest – max. passage diameter 90 mm • Travelling steady rest – max. passage diameter 70 mm • Coolant system • Initial fill with Shell Tellus 46 • Extendable chip tray • Clamping plate 320 mm • Four-way tool post • Safety device for four-way tool post • Slip clutch • Micrometer longitudinal stop • Thread dial indicator Isdpfx Aegd Iagjgpsa • LED machine lamp • Reducing sleeve • Change gears • 2 centre points • Foot pedal with brake function (CE compliant) • Motor with magnetic brake according to CE standard / Operating tools Special accessories: Multifix tool post head, 3 straight holders, 1 factory-mounted prism holder (Price: EUR 672.00 net, not included in the price)

Stanje: novo, Turning length 1000 mm Turning diameter 420 mm Swing diameter over bed slide 255 mm Turning diameter in gap 580 mm Spindle bore 52.0 mm Speed range 30-550 / 550-3000 rpm Bed width 250 mm Spindle mount 55029 D 1-6 Tailstock taper 4 MT Quill stroke 140 mm Total power requirement 5.5 kW Machine weight approx. 1145 kg Dimensions L-W-H 2090 x 1050 x 1600 mm The universal lathe Smart 410 Pro Vario is suitable for performing light and medium-duty turning operations. The basic configuration already includes all essential accessories (3-jaw chuck, steadies, change gears, 3-axis digital readout, etc.), making this machine highly versatile. Furthermore, this model is equipped with a steplessly adjustable spindle speed up to 3000 rpm, allowing optimum adjustment of speed and feed rate to the workpiece. Features - Standard with Delta frequency inverter for high torque at low speeds and almost constant speed under load - Stepless speed control - Speed setting is read on a digital display - Prism bed made of cast iron, induction hardened and precision ground - Central, convenient feed and thread selection with leadscrew and feedscrew - Modern main spindle bearing with precision angular contact ball bearings - Standard with frequency inverter and 3-axis digital readout - Hardened and ground gears and shafts, including in the feed gearbox - Simple construction for speed and feed setting, smooth and precise shifting - Adjustable tailstock for taper turning - Handwheel with adjustable fine scaling (0.02 mm) - Removable gap bridge allows machining of workpieces with large diameters Scope of delivery - 3-axis digital readout ES-12 V with LCD display - 3-jaw steel chuck PO3-200 mm / D6 Iodpfjxaakysx Agpsa - Faceplate 350 mm - Fixed steady rest – maximum through diameter 135 mm - Follow steady rest – maximum through diameter 65 mm - Foot pedal with CE brake function - Four-way toolpost - Safety guard for four-way toolpost - Micrometer longitudinal stop - Turret stop with fine adjustment - Frequency inverter - Initial fill with Shell Tellus 46 - Coolant system - Slip clutch - Thread dial indicator - LED machine lamp - Change gears - Reducing sleeve - 2x dead centers - Chip guard at rear - Operating tools

Leto izdelave: 2021, Stanje: novo, Bernardo Universal Milling Machine UWF 110 Servo -1000 Technical Specifications Table Size: 1370 x 300 mm Spindle Mount: ISO 40 mm Spindle Speed: (11 steps) 45 - 1660 rpm Travel, longitudinal (x): 1000 mm Travel, cross (y): 360 mm Travel, vertical (z): 400 mm Distance Spindle/Table: 60 - 460 mm Arm Reach: 95 - 575 mm Tilting Table: -45° to +45° Max. Workpiece Weight: 250 kg Feed Rate, longitudinal/cross: (8 steps) 30 - 830 mm/min Feed Rate, vertical: (8 steps) 23 - 625 mm/min Rapid Traverse (x, y, and z axis): 1000 / 1000 / 750 mm/min T-Slots (Number / Width / Spacing): 3 / 14 mm / 80 mm Main Motor: 3.0 kW Servo Motor (Torque / Power): 10 Nm / 1.5 kW Coolant Pump Power: 60 W Coolant Pump Flow Rate: 12 l/min Machine Dimensions (W x D x H): 1740 x 1860 x 1900 mm Weight approx.: 1505 kg Scope of Delivery • 3-axis digital readout ES-12 H with LCD display • Drawbar M16 • LED machine lamp • Power feed for x, y, and z axes • Coolant system • Counter bearing • Long milling arbor ISO 40 / 27 mm Iodpsg Hzbxsfx Agpsa • Combination stub arbor ISO 40 / 27 mm • Coolant tray • Adjustable safety guard • Central lubrication for x, y, and z axes • Operating tools

Stanje: rabljeno, Leto izdelave: 2018, Used machine Year of manufacture: 2018 Features and technical specifications: - Drilling depth adjustment via maintenance-free linear guide - Efficient and cost-effective operation thanks to rapid feed system, no need for laborious cranking - Smooth-running, infinitely adjustable drilling unit - Height adjustment with fine adjustment and gas pressure cylinder for weight compensation - Cross and height adjustment with scales and adjustable stops - Vibration-free operation due to robust steel construction - Adjustable drilling depth by scale and stop - Drill head height adjustment can be used entirely for vertical slotting - Large, precision-ground cast iron table Ijdpfx Agexllwcjpja Motor power: 1.5 / 1.9 kW (2.0 / 2.6 HP) Voltage: 400 V Speed: 1,400 / 2,850 rpm Westcott drill chuck: 0–20 mm Maximum drilling depth: 220 mm Drilling width: 340 mm Height adjustment: 145 mm Drill head swiveling range: -60° to +60° Drill table size: 595 × 315 mm Table extension: 2 × 200 × 220 mm Drill table height: 830 mm Dimensions: 1,200 × 1,050 × 1,300 mm (W × D × H) Weight: approx. 240 kg Availability: short-term Location: Flörsheim

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Bernardo FM 45 V Drilling and Milling Machine The FM 45 V drilling and milling machine offers an excellent price-performance ratio thanks to its standard quill feed. The dovetail guide on the gear head ensures maximum precision and stability. Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Throat: 260 mm Spindle speed: (12) 50 - 2520 rpm Spindle taper: MT 4 Quill stroke: 120 mm Quill feed: (3) 0.12 / 0.19 / 0.26 mm/rev Table size: 820 x 240 mm Distance spindle / table: 40 - 485 mm Travel (x / y): 550 / 190 mm Vertical adjustment of milling head: 400 mm T-slot size: 14 mm T-slot spacing: 55 mm Motor output S1 100%: 0.85 / 1.1 kW (400 V) Motor input S6 40%: 1.1 / 1.5 kW (400 V) Machine dimensions (W x D x H): 1150 x 850 x 1450 mm Approx. weight: 285 kg Standard features include automatic quill feed and thread cutting device Large speed range 50 - 2520 rpm (12 steps) Dovetail guideways for x, y, and z axes, adjustable via gib strips Versatile applications: slot milling, face milling, boring, etc. Iedovutw Hepfx Agpoa Heavy-duty, large cross table, precision-ground surface Milling: quill feed via handwheel Drilling: quill feed via handwheel High-quality aluminum motor, designed for continuous operation Sturdy and vibration-free cast iron construction Quick and easy speed changes using shift lever Tilting milling head for angle drilling, bevel milling, etc. Location: Ex-stock 54634 Bitburg - Available at short notice -

Stanje: novo, Bernardo Gear-Driven Column Drilling Machine GB 32 S Vario Technical Specifications Maximum drilling capacity: 32 mm Maximum tapping capacity: M22 Chuck capacity: 1 – 13 mm / B 16 Morse taper: MT 4 Spindle speed / 2 ranges: 90 – 980 / 1000 – 3000 rpm Feed range: 0.06 / 0.12 / 0.18 mm/rev Throat depth: 300 mm Max. distance spindle/table: 670 mm Distance spindle/base plate: 1285 mm Quill stroke: 160 mm Column diameter: 125 mm Table size / T-slot size: 460 x 460 mm / 14 mm Base plate working surface: 420 x 340 mm Motor output (S1 100%): 1.5 kW / 400 V Motor input (S6 40%): 2.2 kW / 400 V Machine dimensions (W x D x H): 540 x 900 x 2120 mm Weight approx.: 360 kg Features • Infinitely variable speed control, ideal for setting the required cutting speed • Machined machine base (420 x 340 mm) with integrated coolant pump • Integrated digital display for spindle speed and drilling depth • Solid cast-iron table with swiveling and tilting working surface • Equipped as standard with 3 automatic spindle feeds • Guaranteed concentricity accuracy ≤ 0.02 mm measured in the quill • User-friendly operation via membrane keypad • Standard with automatic quill feed and tapping device • Sturdy, ground steel column designed for heavy-duty applications Scope of delivery • Key-type drill chuck 1 – 13 mm / B 16 • Drill chuck arbor MT 4 / B 16 • Reducing sleeve MT 4 / 3, MT 3 / 2 • Delta VFD frequency inverter • Automatic tool ejector • Coolant device Iedpjx Agiujfx Agpoa • Electromagnetic spindle feed • Tapping device • LED machine lamp • Digital speed display • Digital drilling depth display • Height-adjustable safety guard

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Bernardo VMS 360 Vertical Bandsaw. Excellent condition, as it was used as a training machine – low hours. The vertical bandsaws of the VMS series are suitable for cutting almost all sawable materials (e.g., steel, plastic, non-ferrous metals, special alloys, etc.). Their main areas of application are general production, as well as tool and jig-making for the manufacturing of stamping and cutting tools. Cutting width: 355 mm Cutting height: 230 mm Working height: 960 mm Cutting speed: 20 – 90 m/min Blade length: 2840 mm Blade width: 3 – 16 mm Table size: 500 x 400 mm Motor power: 0.75 kW Blade welder: 2.4 kVA Machine dimensions (L x W x H): 940 x 560 x 1850 mm Weight approx. 250 kg Supplied as standard with blade welding unit, annealing device, shears, and grinding stone Standard steplessly adjustable cutting speed Machine body made from robust steel construction ensures smooth operation Isdpovutxdefx Agpsa Precision blade guides for optimal cutting results Ideal for cutting complex contours and shapes Blow-off device with compressor included in delivery Bandsaw blades for radius cutting available from 3 mm width Solid cast iron table offers a large support surface for safe working Location: ex stock 54634 Bitburg - available at short notice -