Pasovni brusilnik

Bernardo KBR 100 x 2000 Duo

Stanje: novo, Belt width: 100 mm Belt length: 2000 mm Belt speed: 15 + 30 m/sec Tube diameter: 20 - 76 mm Angle adjustable from 30° to 90° Extraction connection diameter: 2 x 75.0 mm Motor speeds: 1420 / 2660 rpm Flat grinding table: 400 x 100 mm Total power requirement: 2.5 / 3.3 kW Machine weight: approx. 148 kg Dimensions (L x W x H): 750 x 1400 x 1200 mm The KBR 100 x 2000 DUO is a multifunctional grinding machine for tube and profile end grinding at the front, for grinding edges, surfaces and for cylindrical grinding at the rear, as well as for flat grinding on the machine top. Features: - Constant belt tension via spring-loaded tensioning system - Supplied with cylindrical grinding attachment as standard - For grinding diameters of 20 - 76 mm Fedpfx Abexab Dzjvofw - Quick and easy adjustment of the desired grinding angle - Graphite-coated flat grinding surface improves belt glide properties - Large flat grinding surface with protective cover - Low belt speed (15 m/sec), optimal for stainless steel and aluminium grinding - User-friendly belt change, quick and easy - Fast and easy tool-free change of grinding rollers - Various grinding angles from 30° to 90° possible without problems - Shorter machining times compared to milling Scope of delivery: - Abrasive belt K 36 - Rubberized contact roller - 1 piece grinding roller for 1 1/4" tube (42/44 mm tube) - 2 foldable safety screens - Grinding and support table - 2x dust extraction connections, diam. 75 mm - 2 chip collection containers - Graphite coating - Motor protection switch

Stanje: rabljeno, CNC oxy-fuel cutting system BACH type ACW 2500 Oxy-fuel cutting machine with NBS 400 CNC control Machine no. 14 561-06 Year of manufacture: 2006 Cutting area: 2500 x 6500 mm Track length: 8000 mm Gauge width: 3345 mm Ffjdpfjf Ncadjx Abvow Track height: 650 mm 2x machine cutting torches with cutting table

Stanje: novo, Technical Data: Band speed: 15 / 30 m/s Grinding diameter: 20 - 76 mm Carriage adjustment: 30° - 90° Flat grinding table: 400 x 100 mm Contact wheel ø x width: 195 x 100 mm Extraction port ø: 2 x 75 mm Speed: 1420 / 2660 rpm Motor power: 2.5 / 3.3 kW Dimensions (W x D x H), approx.: 750 x 1400 x 1200 mm Weight, approx.: 148 kg Features: - Consistent belt tension thanks to spring-loaded tensioning mechanism - Standard with round grinding device for diam. 20 - 76 mm - Quick and easy setting of the desired grinding angle - Graphite coating on the flat grinding surface improves the sliding properties of the abrasive belt Ffsdpfx Aeqvmqyebvjw - Large-sized flat grinding surface with protective cover - Low belt speed (15 m/s) ideal for grinding stainless steel and aluminium - User-friendly belt change, quick and straightforward - Fast and easy change of grinding rollers without tools - Various grinding angles from 30° to 90° possible without issue - Shorter processing times compared to milling Scope of supply: - Abrasive belt K 36 - Rubberised grinding roller - 1 pc. grinding roller for 1 1/4" (42/44 mm tube) - 2 pcs. foldable protective screens - Grinding and support table - 2 x dust extraction ports diam. 75 mm - 2 pcs. chip collection containers - Graphite coating - Motor protection switch

Stanje: novo, The NEOMIG-i 500 G is a three-phase multiprocess welding machine with a separate wire feeder. Its advanced digital technology and duty cycle ensure excellent arc characteristics for industrial MIG/MAG applications. Integrated synergic functions facilitate setup and reduce spatter during welding. Equipped with the WF wire feeder, it offers precise welding parameter control to guarantee perfect quality. MULTI-PROCESS Fjdpsmxkdpjfx Abvofw MIG/MAG: - Steel and stainless steel wire: Ø from 0.6 to 1.6 mm - Aluminium wire: Ø from 0.8 to 1.6 mm - CuSi and CuAl wire: Ø from 0.8 to 1.6 mm - Flux-cored wire (reverse polarity): Ø from 0.9 to 2.4 mm MMA DC / Pulsed: basic, rutile, and cellulose electrodes. TIG DC Lift / Pulsed. Gouging.

Stanje: novo, Dimenzija (D x Š x V): 1.630 x 700 x 1.200 mm Teža ca.: 480 kg Skupna potrebna moč: 1,1 kW Upogib: 2 Debelina pločevine: 3 mm Dolžina pločevine: 1.050 mm Tehnični podatki Valjčna naprava za pločevino Premer valja: 90 mm Ffsdpfx Aod Eqqqebvjw Hitrost valjanja: 6 m/min • Asimetrična razporeditev valjev • 2 valja gnana s pomočjo zavornega motorja • Nastavitev zadnjega valja z ročnim kolesom • Zgornji valj izmenljiv • Naprava za konusno valjanje • Dvojna nožna stikala za desni-levi tek • Spodnji in zadnji valj z utori za žico • Navodila za uporabo v NEMŠČINI DODATNO: kaljeni valji EURO 900,--

Leto izdelave: 1977, stanje: generalkompletno obnovljen (rabljeno), I am selling a Rapid DGS double mitre saw, year of manufacture 1977. Swivelling heads. Drilling heads included on both sides at the front. Very good condition. Available immediately. Fedpfx Absd N Rb Dsvefw

Stanje: novo, Leto izdelave: 2025, PROFILE BENDING ATTACHMENT PB20 The ideal complement for tube bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be quickly and easily mounted onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping fixture and pulled around the bending tool. With this system, the lengths of the bent legs can be measured precisely using a length stop and can be bent with high repeatability. TECHNICAL DATA: • Bending capacity, steel 37: 100 x 10 mm, Ø 20 mm Fsdpfx Abonh R Eksvefw • Numerous standard tools available • Special tools possible • Sharp-edge tools with bending radius R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° (optional) OUR SERVICE: • Welcome to test production at our in-house demo room • Consultation and information meeting at your site • Leasing/financing purchase consultation and processing via JUTEC • Trade-in of your existing machine • Service contracts and on-site maintenance

Stanje: rabljeno, CNC Cycle-Controlled Lathe HARRISON Type Alpha 400 Plus Machine No.: P30180/150 Year of manufacture: 1998 Centre distance: 1250 mm Swing over bed: 400 mm Centre height: 200 mm Swing over cross slide: 245 mm Max. workpiece diameter in bed gap: 585 mm Bed width: 313 mm Cross slide travel (X-axis): 250 mm Tailstock quill diameter: 73 mm Tailstock quill stroke: 140 mm Tailstock taper: MT 5 Spindle bore: 54 mm Spindle nose: Camlock D1 size 6 Spindle speed: 20-2500 rpm Spindle speed ranges: - Range 1: 15-275 rpm - Range 2: 35-795 rpm - Range 3: 110-2500 rpm Feed rate X and Z: 0.03-0.6 mm/rev Rapid traverse X-axis: max. 2000 mm/min Rapid traverse Z-axis: max. 4000 mm/min Thread cutting function: Metric / Inch / Diametral / Module Ffsdpeh Hvk Asfx Abvew Spindle drive power: 7.5 kW Electrical connection: 400 Volt, 50 Hz, 23.5 kVA - Cycle control: Harrison Alpha / GE FANUC – operating language in French (France) - Automatic 3-stage gearbox (15-275, 35-795, 110-2500 rpm) - Electronic handwheels with selectable graduation (1/10/100) - 3-jaw scroll chuck FORKARDT Ø 250 mm, type CSN, 1 set soft top jaws - Quick-change tool post MULTIFIX size B with 2 tool holders - 1 revolving centre - 1 quick-action drill chuck RÖHM, 3-16 mm - Foldable chuck guard - Hinged work area safety doors - Chip tray with coolant system under machine bed - Switch cabinet fixed to the machine - RS 232 interface Floor space (L x W x H): 2600 x 1450 x 1550 mm Weight: 1950 kg In good condition

Stanje: novo, Special promotion price for stock items! Only while supplies last! Price ex warehouse, plus VAT. Belt Grinder: Bernardo Type/Model: MS 75 x 2000 S Condition: New Belt dimensions: 75 x 2000 mm Belt speed: 29 m/sec. Contact wheel Ø x width: 200 / 80 mm Flat grinding table: 460 x 75 mm Extraction port: 100 mm Motor output (S1 100%): 3.0 kW Motor input power (S6 40%): 4.0 kW Voltage: 400 V Length: 1080 mm Width: 440 mm Height: 1000 mm Weight approx.: 66 kg Features: - High grinding performance thanks to high belt speed - Quick adjustment for horizontal and inclined positions - Continuous flat grinding surface for optimal processing of long workpieces - Constant belt tension via spring-loaded tensioning device - Versatile use for grinding edges, surfaces, and for cylindrical grinding - Quick-release system included for fast belt changes Fedpfsfnr Aiox Abvofw - Easy adjustment of parallel belt tracking via adjustment screw - Graphite coating on the flat grinding surface improves the sliding properties of the sanding belt Scope of delivery: - Abrasive belt K 80 - Flip-up protective shield - Grinding and support table - Workpiece stop - Dust extraction nozzle - Separate emergency stop button - Base frame

Stanje: rabljeno, Mitre Cold Circular Saw Automatic KALTENBACH Type KKS 400 NA Machine No. 101701 Year of manufacture 1983 Saw blade diameter: 400 mm Cutting range at 90° round: Ø 130 mm Cutting range at 90° square: 120 x 120 mm Cutting range at 90° rectangle: 305 x 20 mm Cutting range at 45° round: Ø 130 mm Cutting range at 45° square: 110 x 110 mm Cutting range at 45° rectangle: 245 x 30 mm Clamping range, vice feed: 30 to 140 mm Working height: 1000 mm Mitre cut: 0 - 180° Feed stroke: 600 mm Saw blade speed: 10 + 20 m/min, 2 stages Motor power: 1.7 and 2.6 kW Hydraulic motor: 1.5 kW Electrical connection: 380 Volt, 50 Hz - Hydraulic material vice feed with infeed roller conveyor left side, 1500 mm - Feed stroke via double feed up to 1200 mm (feed twice, then cut) - Hydraulic material clamping with vertical clamping cylinder - Mitre cut saw angle adjustable manually - Hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for saw blade speed - Saw blade lift infinitely adjustable - Coolant device with electric pump in machine base - Hydraulic unit fixed to main machine body Fsdped N H A Nofx Abvjfw - Piece counter with zero shut-off Machine dimensions (L x W x H): 2600 x 1200 x 1900 mm Weight: approx. 1400 kg Good condition