Industrijska naprava za 3D tisk kovin

Nikon SLM Solutions SLM280 2.0 Single 700W

Stanje: rabljeno, Used 3D printer EOSINT M 270, low operating hours (4,910) Iodpfx Aewd Ulvodkotd

Stanje: dober (rabljeno), Leto izdelave: 2001, Ref.-št.: 18404 Proizvajalec: ARBURG Tip: 420C-1300-350 Leto izdelave: 2001 Zapiralna enota Zapiralna sila: 130 ton Odpiralna pot: 500 mm Razmak med stolpci (š x v): 420 x 420 mm Minimalna vgradna višina: 250 mm Odpiralna širina: 750 mm Velikost plošče (š x v): 605 x 605 mm Brizgalna enota Premer polža: 45 mm Brizgalni volumen: 230 cm³ Brizgalna teža PS: 210 g Brizgalni tlak: 1670 bar Dimenzije in teža Dimenzije D x Š x V: 4,68 x 1,3 x 2,2 m Teža stroja: 4080 kg Itjdewm I A Tspfx Adkod Dodatne informacije & dodatki Izvleček jedra: 1 kos.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, obratovalne ure: 200 h, The system is located at the BIBUS Austria Demo Center and can be inspected and tested at any time. In total, the device can process 14 materials – in addition to common plastics such as ABS, PLA, TPU, and Carbon PA, it also supports high-performance polymers such as Ultem, Peek, CarbonPeek, and Helios-Peek. The Hyperspeed upgrade can be performed at any time and increases the system’s productivity in dual mode by 65%. The cost for this is €35,000, including hardware, software, and service. Four material dryers are included in the scope of delivery. Payment terms: advance payment, exclusive of transport and commissioning – these costs are location-dependent and will be invoiced based on the delivery address. Itedpfsibikwex Adkjd

Stanje: generalkompletno obnovljen (rabljeno),

Stanje: zelo dobro (rabljeno), Eos EOSINT Ponujamo Eos EOSINT plastični laserski sinter sistem. Pri sistemu EOS P380 so priloženi naslednji elementi: Kontejner za gradbeni prostor Kontejner za prah Prelivni kontejner 3DM 8-consko ogrevanje procesne komore 250°C Vsaka cona je nastavljiva posebej, homogeno temperaturno polje ± 1°C Kelvin 350 mm x 350 mm x 610 mm Napetost 3/N/PE/ 400V AC Frekvenca 50 Hz Iedpogqux Nefx Adketd Priključna moč 8 kW Varovalka 32 A Maks. moč laserja 100 W Razred laserja odprto 4 Razred laserja zaprto 1 Teža 850 kg EOSINT P 380 Stanje: rabljeno Obseg dobave: (glejte sliko) (Spremembe in napake v tehničnih podatkih so pridržane!) Za dodatna vprašanja smo vam na voljo po telefonu.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, obratovalne ure: 1.504 h, Oprema: ABS, kompresor, Tiskalnik je popolnoma funkcionalen in še vedno priključen na elektriko. Ni bil pogosto uporabljen, le 1504 delovnih ur. Na voljo so vse licenčne materiale za modele iz leta 2019. Novi komplet PM je na lokaciji in bo nameščen tik pred odpremo tiskalnika novemu kupcu. Enota za odstranjevanje podpor EFT-900 je na voljo. Ijdpow Imk Rofx Adkjtd

Stanje: generalkompletno obnovljen (rabljeno), For sale: EOS P760 – Guaranteed operational condition Itsdpev Dxw Dsfx Adksd This EOS P760 has been fully cleaned and refurbished by Inframotion 3D (IM3D) to ensure optimal performance. Equipped with 2x Coherent C70 CO2 lasers from the P770, this high-end machine is designed for demanding SLS production environments. With this unit, you can expect print quality comparable to the P770. The P770 is only faster. Available accessories: We offer a range of optional accessories to enhance your setup, including: • Docking station • Transitube • IPCM P • Unpacking station • Build frames We supply plug-and-play materials, fully tested and optimized for EOS systems. Our Inframotion PA12 delivers excellent performance at a fraction of the cost of OEM powders, letting you reduce production costs without compromising quality. Included services: • Transport & installation: Safe delivery in original EOS packaging and professional installation services. • Warranty & maintenance plans: Flexible options available to suit your needs. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in high-quality refurbished EOS SLS machines and offer comprehensive support. As the only provider delivering a complete solution for pre-owned EOS equipment, we offer unparalleled expertise and reliability. What we offer: • Expert service: Installation, maintenance, repairs, and upgrades by skilled former EOS technicians. • Exclusive materials: Cost-effective consumables such as our plug-and-play PA12, thoroughly tested and optimized for EOS systems. • End-to-end support: From transport to tailored maintenance plans, we take care of every detail. Choose IM3D for reliable machinery, premium materials, and the expertise to maximize your SLS production. Contact us today for more information or specific inquiries!

Stanje: rabljeno, Designation: 3D Printer Selective Laser Melting Machine Manufacturer: SLM Solutions AG Model: SLM 280 HL Build Volume: 280 x 280 x 365 mm (minus substrate plate height) Machine Configuration: Single Optic 1x 400W Materials Used: (1.4404, 1.2709, L40, AlSi10Mg) Laser Operation Hours: 1500 h Build Rate up to 88 cm³/h: depending on material and part geometry Variable Layer Thickness: 20 μm - 90 μm Min. Feature Size: 150 μm Focus Diameter: 80 - 115 μm Max. Scanning Speed: 10 m/s Average Shield Gas Consumption During Build: 3.0 l/min (argon) Iedpfx Adjwpkcnjkotd Average Shield Gas Consumption During Flooding: 200 l/min (argon) Electrical Connection / Power Consumption: 400 Volt 3NPE, 63 A, 50/60 Hz, 3.5 - 5.5 kW Compressed Air Requirement / Consumption: 60 l/min, 6 bar Machine Dimensions: 2600 mm x 1200 mm x 2700 mm Item Condition: Used item as shown in the pictures Contact us if you have any questions Shipping: The specified shipping costs apply to deliveries within Germany Worldwide shipping (shipping costs outside Germany upon request) Worldwide shipping (please kindly request shipping costs) The given shipping costs apply to shipping within Germany Sale only to business customers, without warranty or guarantee. Deviations from technical data as well as errors in the item description may occur and are reserved.

Stanje: rabljeno, SLM Solutions Model: SLM 500 Build volume (L x W x H): 500 x 280 x 365 mm (excluding substrate plate height) 3D optics configuration: Quad (4 x 700 W) Build rate: up to 345 cm³/h Variable layer thickness: 20 µm - 90 µm Minimum feature size: 150 µm Focus diameter: 80 µm - 115 µm Maximum scan speed: 10 m/s Average shielding gas consumption during build process: 16 l/min (argon) Average shielding gas consumption during flooding process: 250 l/min (argon) Ijdpfxov Iff Ns Adkotd Powder supply with 90 kg Electrical connection / power consumption: 400 Volt 3NPE, 63 A, 50/60 Hz, 8-5.5 kW Compressed air requirements / consumption: ISO 8573-1:2010 [1:4:1] 7 bar Machine dimensions (L x W x H): 6080 mm x 2530 mm x 2620 mm Machine weight (without / incl. powder): kg, kg with powder Operated with aluminium AlSi10Mg! Laser hours: 1689 h Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data. All information is non-binding!) For further questions, please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Število osi: 3 Itsdpfx Aeyaq T Todked Doseg: 1500 mm Nosilnost: 6 kg X = 420 mm Y = 1000 mm Z = 1500 mm