Center stružnica

Bernardo Solid 460 x 1000 Pro

Stanje: novo, Bernardo Universal Lathe Solid 460 x 1000 Pro Vario Technical Specifications Centre distance: 1000 mm Centre height: 230 mm Swing over bed: 460 mm Swing over gap: 690 mm Swing over cross slide: 270 mm Bed width: 300 mm Fpedpfxjxl Tcae Ahmeh Spindle bore: 80 mm Spindle mount: DIN 55029, D1-8 Spindle speed range: 25 – 250 / 250 – 1700 rpm Longitudinal feed range (42): 0.055 – 3.065 mm/rev Cross feed range (42): 0.025 – 1.386 mm/rev Metric threads (41): 0.1 – 14 mm Imperial threads (60): 2 – 112 TPI Tailstock quill diameter: 60 mm Tailstock quill travel: 130 mm Tailstock taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (L x W x H): 2300 x 1080 x 1600 mm Weight approx.: 1730 kg Features • Modern main spindle bearing with precision angular contact ball bearings • Standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control, set speed readable on digital display • Hardened and ground gears and shafts, including in the feed gearbox • Rapid traverse (longitudinal and cross) as standard to reduce idle times • Central, ergonomic controls for feeds and threading, with lead screw and feed shaft • Gears are large, hardened, and ground to precision • Speed and feed adjustment is simple, smooth, and precise • The machine bed is cast in one piece, extremely torsion-resistant and low-vibration, providing the basis for precise turning operations Scope of delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Fixed steady rest – max. passage diameter 150 mm • Travelling steady rest – max. passage diameter 110 mm • First fill with Shell Tellus 46 • Faceplate 450 mm • Quick-change tool post with 4 holders • Safety guard for quick-change tool post • Foot pedal with brake function according to CE • Coolant system • Frequency inverter • Safety slip clutch • Rapid traverse (longitudinal and cross) • Change gears • Reducing sleeve • 2 centre points • Thread dial indicator • LED machine light • Chip guard at rear • Operating tools

Stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: 5722, Table clamping surface: 190 x 710 mm Table travel x: 390/360 mm Table travel y: 150 mm Table travel z: 280 mm Spindle mount: SK 40 Spindle speeds: 100 - 3100 rpm Longitudinal feed: 0 - 600 mm/min Electrical connection: 380 V, approx. 1.5 kW Required space: 1400 x 1200 x 1500 mm Weight: approx. 680 kg Fjdpjflrg Tofx Ahmjph

Stanje: rabljeno, Leto izdelave: 2003, x-travel: 760 mm y-travel: 290 mm z-travel: 370 mm Speed: 60 - 4200 rpm Table: 750 x 230 mm Quill stroke: 127 mm Quill feed: (3) 0.04; 0.08; 0.13 mm/rev Feed range: 19 - 890 (x) mm/min Spindle taper: SK 30 Column overhang: 171 - 476 mm Total power requirement: 2.4 kVA Machine weight approx.: 0.95 t Fpsdet U Rm Uopfx Ahmoh Space requirement approx.: 2.05 x 1.63 x 2.07 m The MF1 universal milling machine series impresses with its design and has become indispensable in many repair shops as well as training and production departments. The X-axis is equipped with a continuously variable feed unit, and the swiveling vertical milling head features a wide, stepless speed range for machining steel and non-ferrous metals. Standard equipment includes automatic quill feed, pneumatic tool clamping, and a digital position display. ·Swivel and tilting milling head with quill feed ·Pneumatic tool clamping device ·Continuously variable spindle speed ·Rapid feed in X-axis ·Comprehensive standard accessories

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 280 mm, izvrtina vretena: 58 mm, premer struženja nad ležiščem sani: 470 mm, višina središča: 235 mm, stružna dolžina: 1.000 mm, poteza s peresom: 127 mm, premer tulec: 68 mm, skupna dolžina: 2.150 mm, skupna širina: 810 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 20 obr/min, širina postelje: 300 mm, skupna masa: 1.800 kg, nosilec puše: MK 4, Centre height: 235 mm Centre distance: 1000 mm Spindle bore: 58 mm Spindle nose according to DIN 55029: Camlock D6 Motor power: 5.5 kW Spindle speed range: 20–2000 rpm Equipment includes, among others: Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surfaces) of the carriage and cross slide Manual central lubrication with a pump for the longitudinal and cross slides Complete coolant system with rear splash guard and carriage splash protection Chuck guard Control rod with 3 adjustable cams Machine lamp Fixed centre Fpedocirnispfx Ahmoh Set of machine mounting plates

Leto izdelave: 2005, stanje: skoraj kot novo (rabljeno), Kakovostno rabljeno Bystronic PR 100 8-osno CNC upogibno stiskalnico na voljo BYSTRONIC PR100 x 3100, 100 ton x 3100 mm, 8-osna CNC hidravlična spodnja upogibna stiskalnica, popolnoma opremljena s krmilnikom Cybelec Modeva 10S. Letnik izdelave 2005 – od novega v celoti servisirana pri Bystronic UK Specifikacije: Letnik izdelave: 2005 Krmiljenje: Cybelec Modeva 10S Pomik zadnjega naslona: programsko vodeno Zaščite: Fiessler AKAS Kapaciteta: 100 ton Največja dolžina upogiba: 3100 mm / 3 metre Razširjena odprtost (daylight): potrditi Največji hod: 315 mm Hitrost hitrega pomika: 180 mm/s Delovni cikel upogiba: 10 mm/s Hitrost povratka: 150 mm/s Orodje: zgornje in spodnje Fjdpfxshufkte Ahmeph Pedalni nožni upravljalnik tipa Wander Skupno 8 osi: Y1, Y2, X1, X2, R1, R2, Z1, Z2 – 6-osni pomični zadnji naslon Hidravlično kompenziranje (Hydraulic Crowning) Po želji pripravimo ponudbo za dobavo in montažo z vključenim šolanjem operaterjev. Svetujemo in dobavimo tudi popolnoma nova orodja za obdelavo pločevine na tej CNC upogibni stiskalnici.

Stanje: dober (rabljeno), Leto izdelave: 2002, številka stroja/vozila: 025137, Offer 24190 Technical Specifications: Fpedpjwyl H Nefx Ahmsh - Drilling capacity: 25 mm - Spindle taper: MT 3 - Quill stroke: 140 mm - 8 spindle speeds: 100 – 2,900 rpm - Min. / max. distance spindle / table: 110 / 405 mm - Lighting - Quick-action drill chuck - Coolant system - Machine vice - Machine base - Drive: 400 V / 0.75 kW - Required space (W x H x D): 400 x 1250 x 600 mm - Approx. weight: 200 kg

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), številka stroja/vozila: MBHF-KBK1, DEMAG KBK overhead crane system, crane runway dimensions approx. 12m x 3.5m Other dimensions available upon request! Load capacity / lifting capacity: 125 kg (0.125 t) Fjdpfx Aepiarnjhmoph Technical specifications of the system: Crane runway made of Demag KBK1 rails System will be delivered complete: KBK rails, rail connectors, trolleys, end plates, cable festoon system, power supply, brackets/suspenders, etc. Incl. 1 bridge with 125 kg Demag DC-COM chain hoist Crane is dismantled and available immediately Very good used condition, see pictures Item location: 75053 Gondelsheim Shipping by freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems with load capacities from 125 kg to 1600 kg are also available. Please enquire about your crane runway with required cantilever load and dimensions.

Stanje: skoraj kot novo (rabljeno), Višina konic nad ležiščem: 330 mm, največji stružni premer na vozičku: 408 mm, največji stružni premer nad ležiščem: 640 mm, največji stružni premer v izrezu: 899 mm, razdalja med konicama: 2000 mm, variabilna hitrost vretena, obr/min 18/1500, premer izvrtine vretena: 105 mm, vreteno priključek: ASA 11”, konjiček CM5, premer puše: 90 mm, hod puše: 250 mm, prečni pomik vozička: 275 mm, glavni motor: 15 KM, teža stroja: 3450 kg. Fpjdpfxsx Dikko Ahmsh

Stanje: rabljeno, CNC Cycle-Controlled Lathe HARRISON Type Alpha 400 Plus Machine No.: P30180/150 Year of manufacture: 1998 Centre distance: 1250 mm Swing over bed: 400 mm Centre height: 200 mm Swing over cross slide: 245 mm Max. workpiece diameter in bed gap: 585 mm Bed width: 313 mm Cross slide travel (X-axis): 250 mm Tailstock quill diameter: 73 mm Tailstock quill stroke: 140 mm Tailstock taper: MT 5 Spindle bore: 54 mm Spindle nose: Camlock D1 size 6 Spindle speed: 20-2500 rpm Spindle speed ranges: - Range 1: 15-275 rpm - Range 2: 35-795 rpm - Range 3: 110-2500 rpm Feed rate X and Z: 0.03-0.6 mm/rev Rapid traverse X-axis: max. 2000 mm/min Rapid traverse Z-axis: max. 4000 mm/min Thread cutting function: Metric / Inch / Diametral / Module Spindle drive power: 7.5 kW Electrical connection: 400 Volt, 50 Hz, 23.5 kVA - Cycle control: Harrison Alpha / GE FANUC – operating language in French (France) - Automatic 3-stage gearbox (15-275, 35-795, 110-2500 rpm) - Electronic handwheels with selectable graduation (1/10/100) - 3-jaw scroll chuck FORKARDT Ø 250 mm, type CSN, 1 set soft top jaws - Quick-change tool post MULTIFIX size B with 2 tool holders - 1 revolving centre - 1 quick-action drill chuck RÖHM, 3-16 mm - Foldable chuck guard - Hinged work area safety doors - Chip tray with coolant system under machine bed - Switch cabinet fixed to the machine - RS 232 interface Floor space (L x W x H): 2600 x 1450 x 1550 mm Weight: 1950 kg Fpodpeh Hvk Aofx Ahmjh In good condition

Leto izdelave: 1993, stanje: dober (rabljeno), številka stroja/vozila: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine No.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feed for 2 workpieces, in good condition Fedpfx Ahjcc D Ddemeph Pulling force: 10,000 kg Broaching length: 1000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Draw head holder diameter: 3 x Ø 80 mm Clear width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 up to max. 27.5 m/min Machine dimensions (W x D x H): approx. 5500 x 2800 x 4900 mm Power supply / connected load: 380 Volt, 50 Hz / 38 kW Accessories / Special Equipment: The machine is equipped with a workpiece table and a traverse support for 3 broaching stations. Furthermore, the machine features an automatic workpiece feeding system for 2 workpieces. Clamping of the shank and end-piece holders is hydraulic. The machine includes a coolant system with an integrated magnetic chip conveyor, enabling operation without the need for a special foundation (pit). Remarks: The machine is designed for use in large-scale series production. It is in very good condition and still has its original paint. The machine can be inspected under power in our warehouse.