Bernardo Bm 20 Vario nakup rabljenega (221)

Stanje: novo, Bernardo Universal Lathe Solid 460 x 2000 Pro Vario Technical Specifications Centre distance: 2000 mm Centre height: 230 mm Swing over bed: 460 mm Swing over gap: 690 mm Ksdpjxl Tcmsfx Al Nsdk Swing over cross slide: 274 mm Bed width: 300 mm Spindle bore: 80 mm Spindle mount: DIN 55029, D1-8 Speed range: 25 – 250 / 250 – 1700 rpm Longitudinal feeds (42): 0.055 – 3.065 mm/rev Cross feeds (42): 0.025 – 1.386 mm/rev Metric threads (41): 0.1 – 14 mm Inch threads (60): 2 – 112 TPI Quill diameter: 60 mm Quill travel: 130 mm Quill taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 3250 x 1080 x 1370 mm Weight approx.: 2030 kg Features • Modern main spindle bearing with precision angular contact ball bearings • Standard Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Stepless speed control; the set speed is shown on a digital display • Hardened and ground gears and shafts, also in the feed gearbox • Standard with rapid traverse (longitudinal and cross) to reduce non-productive times • Central, user-friendly control for feeds and threads, with leadscrew and feed shaft • Gears are oversized, hardened, and precision ground • Speed and feed adjustment is simple, smooth, and precise • The machine bed is cast in one piece, extremely torsion-resistant and low in vibration, meeting key requirements for accurate turning Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Fixed steady rest – through-hole diameter max. 150 mm • Travelling steady rest – through-hole diameter max. 110 mm • Initial fill with Shell Tellus 46 • Face plate 450 mm • Quick-change toolpost with 4 holders • Safety guard for quick-change toolpost • Foot pedal with brake function (CE compliant) • Coolant system • Frequency inverter • Slip clutch • Rapid traverse (longitudinal and cross) • Change gears • Reducing sleeve • 2 centre points • Thread dial • LED machine lamp • Chip guard (rear wall) • Operating tools

Stanje: novo, Bernardo Universal Lathe Titan 560 x 2000 Pro Vario Technical Specifications Distance between centers: 2000 mm Center height: 280 mm Swing over bed: 560 mm Swing over gap: 785 mm Swing over cross slide: 350 mm Bed width: 350 mm Spindle bore: 105 mm Kdedpsxl Tc Tefx Al Njk Spindle mount: DIN 55029, D1 – 8 Speed range: 25 – 220 / 220 – 1500 rpm Longitudinal feeds (42): 0.055 – 3.061 mm/rev Cross feeds (42): 0.025 – 1.384 mm/rev Metric threads (41): 0.1 – 14 mm Inch threads (60): 2 – 112 TPI Quill diameter: 75 mm Quill travel: 185 mm Quill taper: MT 5 Motor power: 7.5 kW (10.0 HP) Machine dimensions Length: 3340 mm Width x Height: 1150 x 1610 mm Weight: approx. 2720 kg Features • Equipped as standard with a Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control, with the set speed displayed digitally • Versatile applications in general engineering, production, single-part manufacturing, and more • Removable gap segment allows machining of large diameter workpieces • Standard with rapid traverse longitudinal and cross feeds to minimize nonproductive time • Modern main spindle bearing with precision angular contact ball bearings • One-piece cast machine bed, extremely torsion-resistant and low-vibration, providing an essential basis for accurate turning • Tailstock offsettable for taper turning • Centralized lubrication for the carriage Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-315 mm / D8 • Fixed steady rest – max. capacity: 180 mm diameter • Follow steady rest – max. capacity: 120 mm diameter • Foot pedal with CE-certified braking function • Safety device for quick-change tool post • LED machine lamp • Initial fill with Shell Tellus 46 • Face plate 450 mm • 2 centers • Frequency inverter • Digital speed display • Overload clutch • Rapid traverse longitudinal and cross feeds • Coolant system • Quick-change tool post with 4 tool holders • Change gears • Reducing sleeve • Chip guard/rear splash guard • Operation tools

Stanje: novo, Sheet width: 2020 mm Sheet thickness: 2.0 mm Opening width: 124 mm Max. bending angle: 0 - 135° Working height: 930 mm Total power requirement: manual operation Machine weight: approx. 1,010 kg Space requirement: approx. 2.75 x 0.56 x 1.26 m Features: - Easy-to-operate folding/bending machine Kodpfx Alexaaano Nedk - Flat guide for precise upper beam adjustment - Manually adjustable bending angle with scale - Robust welded steel construction designed for heavy-duty operation - Large opening width for processing tall workpieces - Optional rear gauge for serial production - Fast and easy bending process with bow handle - Workpiece clamping via large-dimensioned lever

Stanje: novo, Drill diameter: 2.0 - 20.0 mm Point angle: 90 - 135° Speed: 4800 rpm Voltage: 230 volts Motor power: 0.12 kW Weight: 8.6 kg Dimensions (L x W x H): 285 x 130 x 170 mm The compact drill bit grinding machine DG 20 M is ideal for sharpening twist drills made of HSS, cobalt, and carbide. Thanks to the adjustable point angle of 90° to 135°, this model is suitable for universal use with 2-flute twist drills. Features: - For grinding twist drills made of HSS and carbide from 2 - 20 mm - ER 20 and ER 25 collets also allow clamping of intermediate sizes - Optimum grinding results due to the specially guided collet - Includes device for thinning the drill tip - Universally adjustable point angle from 90° - 135° - Fast and simple grinding process Scope of delivery: - CBN grinding wheel - ER 20 collets, 3 – 12 mm * 11 pcs. (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13 mm) - ER 25 collets, 14 – 20 mm * 7 pcs. (14 / 15 / 16 / 17 / 18 / 19 / 20 mm) - Collet holder ER 20/ER 25 Kdodpfx Aexablxjl Nsk

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 32 kg, vhodna napetost: 230 V, Automatic internal lubrication – coolant is supplied directly to the annular cutter, increasing tool life and work quality. INFINITELY variable speed control – allows optimal adjustment of cutting speed to the processed material type. Morse Taper MK4 spindle – enables mounting of various tooling such as twist drills, countersinks, reamers, tapping chucks, or hole-saws. Powerful high-torque motor with soft start and overload protection ensures reliable operation. Robust electromagnet securely holds the machine in place during operation. Ergonomic control panel enables quick and intuitive set-up of working parameters. Solid machine construction enhances stability and minimizes vibrations during machining. Wide range of applications – ideal for industrial, workshop, and on-site service use. Technical specifications: Drilling diameter (annular cutter): 100 mm Drilling depth (annular cutter): 100 mm Drilling diameter (twist drill): 38 mm Arbor vertical travel: 275 mm Max tapping capacity: M32 Spindle speed min.: 50 rpm Spindle speed max.: 800 rpm Speed range / gear settings / stepless: 1. 50-110 / 2. 20-200 / 3. 200-500 / 4. 320-800 Spindle taper: MK4 Weldon shank: 19/32 mm Distance spindle / base plate: 290 mm Distance Weldon shank / max. base plate: 165 mm Magnetic adhesion force: 20,500 N Magnetic base dimensions: 245 x 125 x 50 mm Kodpfx Ajyt I Uuel Nsdk Motor power: 2580 W Voltage: 230 V Dimensions (width): 330 mm Dimensions (depth): 430 mm Dimensions (height): 830 mm Weight approx.: 31.5 kg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, premer orodja: 60 mm, nosilec vretena: MK 5, največja hitrost vrtenja: 2.000 obr/min, vrtljajska hitrost (min.): 38 obr/min, skupna masa: 3.800 kg, Oprema: CE označba, The RD 1600 VARIO radial drilling machine is a professional device for drilling holes in metal, wood, and other materials. With its high power and robust construction, it ensures fast and precise drilling, even under the most demanding conditions. A powerful 4.0 kW motor is equipped with an inverter and a wide speed range of 38-2,000 rpm. The arm, drilling headstock, and column each have their own independent hydraulic clamp. The machine features a large work table measuring 1740 x 980 mm, automatic spindle feed, cooling system, and motorized arm height adjustment. Maximum drilling capacity is 60 mm; tapping up to M46. Standard features: - Infinitely variable speed control with digital readout - High spindle coaxiality with automatic brake - Arm, headstock, and column with independent hydraulic clamps - Solid base enabling machining of large components - Heavy-duty, ground column ensures smooth arm movement - Motorized arm elevation without changing the spindle position enables series production - Control panel buttons allow locking or releasing the headstock and column simultaneously or separately - Hardened and ground arm guides - Balanced machine design ensures ideal spindle feed Kdedpfx Aeytfxkel Nek - Perfect for drilling, countersinking, reaming, and tapping Technical specifications: - Maximum drilling capacity: 60 mm - Maximum tapping capacity: M46 - Spindle taper: MT5 - Spindle speed min.: 38 rpm - Spindle speed max.: 2,000 rpm - Spindle speed adjustment: stepless (38 – 275, 275 – 2,000) - Drive transmission: gear - Automatic spindle feed range: (8 steps) 0.06 – 1.00 mm/rev - Spindle-to-column distance min.: 350 mm - Spindle-to-column distance max.: 1,600 mm - Spindle-to-table: 165 – 750 mm - Spindle-to-base plate min.: 665 mm - Spindle-to-base plate max.: 1,250 mm - Vertical travel of arm with head: 585 mm - Horizontal travel of drilling head: 1,250 mm - Quill stroke: 325 mm - Column diameter: n/a mm - Clamping table size: 750 x 500 x 500 mm - Work surface on base plate: 1,740 x 980 mm - Motor power: 4 kW - Voltage: 400 V - Dimensions (W x D x H): 2,600 x 1,100 x 2,770 mm - Weight approx.: 3,800 kg Scope of delivery: - Clamping table - Drill chuck MK5 / B16 - Reduction sleeves MK5/4, MK4/3, MK3/2 - LED lighting - Filled with Shell Tellus 46 oil - Cooling system - Inverter - Digital speed readout - Lifting motor - Hydraulic motor - Guard - Service tools - Legally required safety shields - Complete Polish DTR documentation - CE certificate - 24-month warranty for all components with no extra charges

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, premer orodja: 50 mm, nosilec vretena: MK 4, vrsta aktuacije: električni, največja hitrost vrtenja: 2.200 obr/min, vrtljajska hitrost (min.): 55 obr/min, širina mize: 800 mm, dolžina mize: 260 mm, skupna masa: 800 kg, Oprema: CE označba, vrtilna hitrost brezstopenjsko nastavljiva, The GB 55 SK NC VARIO drilling machine comes standard with a large cross table and 2-axis digital readout, enabling not only drilling but also precision milling. Automatic spindle feed and the tapping function significantly expand the capabilities of the machine. The stepless spindle speed adjustment within the range of 55–2200 rpm, combined with heavy-duty construction and high drilling capacity, makes this model suitable for serial or industrial production. The NC version features a programmable controller for setting drilling depth, spindle speed, and automatic tapping functions. Drilling diameter: 50 mm, tapping up to M42. Kjdpfeytfuxjx Al Nedk Features: - NC version with programmable controller for setting drilling depth, spindle speed, automatic tapping, and more - 6-range automatic spindle feed, controlled by electromagnetic clutch, including tapping function - Sturdy construction ensures vibration-free operation - Powerful drive motor suitable for continuous operation - 2-axis digital display for precise machining - Solid base plate with T-slots and integrated cooling system - Comprehensive standard equipment - Quiet running thanks to hardened and ground gears - Safety covers conforming to the latest CE standards - Automatic tool ejector for quick tool changes - Electronic indicators for drilling depth and spindle speed as standard - Stepless spindle speed adjustment Technical Data: - Max. drilling capacity: 50 mm - Drilling capacity in cast iron: 60 mm - Max. tapping capacity: M42 - Drill chuck: 1 – 13 mm / B16 - Spindle taper: MK4 - Minimum spindle speed: 55 rpm - Maximum spindle speed: 2200 rpm - Infinitely variable speed (55–348 / 348–2200 rpm) - Drive transmission: gearbox - Automatic spindle feed range: 0.08 / 0.12 / 0.17 / 0.24 / 0.35 / 0.50 mm/rev - Table tilt: -45° to +45° - Max. spindle-column distance: 380 mm - Max. spindle-table distance: 480 mm - Max. spindle-base distance: 1165 mm - Quill stroke: 210 mm - Column diameter: 150 mm - Table size (W x D): 800 x 280 mm - Cross-table travel (X x Y): 415 x 290 mm - T-slot size: 14 mm - Motor power (S1 100%): 3.0 kW - Voltage: 400 V - Dimensions (W x D x H): 1230 x 1240 x 2310 mm - Weight approx.: 800 kg Scope of Delivery: - 2-axis ES-12H LCD digital display - Cross table - Drill chuck 1-13 mm / B16 - Arbor MK4 / B16 - Reducing sleeves MK4/3, MK4/2, MK3/1 - Cooling system - Tapping mode - Electromagnetic spindle - Automatic tool ejector - LED lighting - Movable safety guard - Electronic indicator for drilling depth and spindle speed - Stepless speed regulation

Stanje: novo, Bernardo Universal Lathe Titan 560 x 1500 Pro Vario Technical Specifications Centre Distance: 1500 mm Centre Height: 280 mm Swing Diameter over Bed: 560 mm Swing Diameter over Gap: 785 mm Swing Diameter over Cross Slide: 350 mm Bed Width: 350 mm Spindle Bore: 105 mm Spindle Mount: DIN 55029, D1 – 8 Speed Range: 25 – 220 / 220 – 1500 rpm Longitudinal Feed Range (42): 0.055 – 3.061 mm/rev Cross Feed Range (42): 0.025 – 1.384 mm/rev Metric Threads (41): 0.1 – 14 mm Inch Threads (60): 2 – 112 TPI Tailstock Quill Diameter: 75 mm Tailstock Quill Travel: 185 mm Tailstock Quill Taper: MT 5 Motor Power: 7.5 kW (10.0 HP) Kjdjxl Tcyopfx Al Nedk Machine Dimensions - Length: 2840 mm Width x Height: 1150 x 1610 mm Weight: approx. 2,420 kg Features • Standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Stepless speed control, set speed displayed digitally • Versatile applications in general engineering, production, single-part manufacturing, etc. • Removable gap bridge enables machining of large diameter workpieces • Standard with rapid traverse in longitudinal and cross for reduced secondary times • Modern main spindle bearing with precision angular contact ball bearings • Machine bed cast in one piece – extremely torsion-resistant and low-vibration for precise turning • Tailstock can be offset for taper turning operations • Central lubrication for bed slide Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-315 mm / D8 • Fixed steady rest – max. passage diameter 180 mm • Travelling steady rest – max. passage diameter 120 mm • Foot pedal with CE-compliant brake function • Safety guard for quick-change toolpost • LED machine lamp • Initial fill with Shell Tellus 46 • Faceplate 450 mm • 2 centre points • Frequency inverter • Digital speed display • Slip clutch • Rapid traverse longitudinal and cross • Coolant system • Quick-change toolpost with 4 holders • Change gears • Reducing sleeve • Chip guard • Service tools

Stanje: novo, Bernardo GB 30 Vario Geared Head Drilling Machine Technical Specifications Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 35 mm Kdedpfx Ajgd H Uusl Nok Maximum tapping capacity: M22 Drill chuck: 1 - 13 mm / B 16 Morse taper: MT 3 Spindle speed / 2 ranges: 70 - 495 / 495 - 3500 rpm Feed rates: 0.1 / 0.2 / 0.3 mm/rev Throat depth: 280 mm Max. spindle-to-table distance: 650 mm Spindle-to-baseplate distance: 1120 mm Quill stroke: 125 mm Column diameter: 110 mm Table size / T-slot size: 450 x 380 mm / 14 mm Baseplate work area: 340 x 330 mm Motor output (S1 100%): 1.1 kW Motor input power (S6 40%): 1.5 kW Machine dimensions (W x D x H): 500 x 800 x 2100 mm Weight approx.: 320 kg Scope of delivery • Drill chuck arbor MT 3 / B 16 • Reducing sleeve MT 3 / 2, MT 3 / 1 • Keyed drill chuck 1 - 13 mm / B 16 • Coolant system • Electromagnetic spindle feed • Tapping device • Automatic tool ejector • LED machine lamp • Digital speed display • Initial fill with Shell Tellus 46 • Height-adjustable safety guard

Stanje: novo, Bernardo Workshop Press WK 20 FH Pro Technical Specifications Pressing force: 20 t Piston stroke: 185 mm Table width: 170 mm Clearance (E): 510 mm Clearance (F): 130 mm Distance cylinder - table (F1): 40 mm Distance cylinder - table (F2): 965 mm Lateral cylinder travel (M): 175 mm Width (A): 730 mm Depth (B): 560 mm Height 1 (C): 1525 mm Height 2 (D): 1630 mm Weight approx.: 112 kg Features • Supplied as standard with left and right traversable pressure cylinder • Suitable for aligning, pressing, bending, assembling gears, discs, etc. • Standard equipment includes foot pedal and hydraulic hand pump for piston feed Kedpfjd Du T Rjx Al Nodk • Supplied with V-block for aligning shafts • Automatic piston return via integrated return spring as standard • Height-adjustable press table with locking pin • Large, easy-to-read pressure gauge • Includes two-stage hydraulic pump • Robust design thanks to welded steel frame

Stanje: novo, Column Drilling Machine Bernardo BM 32 SB Maximum drilling capacity: 32 mm Drill chuck: 1 - 16 mm / B 18 Morse taper: MT 4 Spindle speed (12 steps): 150 - 2450 rpm Throat depth: 255 mm Swiveling drill table: 360° Maximum distance spindle / table: 750 mm Distance spindle / base plate: 1210 mm Quill stroke: 120 mm Column diameter: 92 mm Table size / T-slot size: 385 x 335 mm / 14 mm Base plate working area: 380 x 335 mm Motor output (S1 100%): 1.1 kW / 400 V Motor input (S6 40%): 1.6 kW / 400 V Machine dimensions (W x D x H): 450 x 800 x 1730 mm Kodpod Tcchofx Al Njdk

Stanje: novo, Bernardo Gear-Driven Column Drilling Machine GB 32 S Vario Technical Specifications Maximum drilling capacity: 32 mm Maximum tapping capacity: M22 Chuck capacity: 1 – 13 mm / B 16 Morse taper: MT 4 Spindle speed / 2 ranges: 90 – 980 / 1000 – 3000 rpm Feed range: 0.06 / 0.12 / 0.18 mm/rev Throat depth: 300 mm Max. distance spindle/table: 670 mm Distance spindle/base plate: 1285 mm Quill stroke: 160 mm Column diameter: 125 mm Table size / T-slot size: 460 x 460 mm / 14 mm Base plate working surface: 420 x 340 mm Motor output (S1 100%): 1.5 kW / 400 V Motor input (S6 40%): 2.2 kW / 400 V Machine dimensions (W x D x H): 540 x 900 x 2120 mm Weight approx.: 360 kg Features • Infinitely variable speed control, ideal for setting the required cutting speed • Machined machine base (420 x 340 mm) with integrated coolant pump • Integrated digital display for spindle speed and drilling depth • Solid cast-iron table with swiveling and tilting working surface • Equipped as standard with 3 automatic spindle feeds • Guaranteed concentricity accuracy ≤ 0.02 mm measured in the quill • User-friendly operation via membrane keypad • Standard with automatic quill feed and tapping device • Sturdy, ground steel column designed for heavy-duty applications Scope of delivery • Key-type drill chuck 1 – 13 mm / B 16 • Drill chuck arbor MT 4 / B 16 • Reducing sleeve MT 4 / 3, MT 3 / 2 • Delta VFD frequency inverter • Automatic tool ejector • Coolant device Kdodpsx Agiuofx Al Nsk • Electromagnetic spindle feed • Tapping device • LED machine lamp • Digital speed display • Digital drilling depth display • Height-adjustable safety guard

Stanje: novo, Bernardo Universal Lathe Smart 410 x 1500 Pro Vario Technical Specifications Centre Distance: 1500 mm Centre Height: 210 mm Swing over Bed: 420 mm Swing over Gap: 580 mm Swing over Cross Slide: 255 mm Bed Width: 250 mm Spindle Bore: 52 mm Spindle Mount: DIN 55029, D1 – 6 Speed Range, 2 Stages: 30 – 550 / 550 – 3000 rpm Longitudinal Feed Range (17): 0.05 – 1.7 mm/rev Cross Feed Range (17): 0.025 – 0.85 mm/rev Metric Threads (42): 0.2 – 14 mm Imperial Threads (45): 2 – 72 TPI Quill Diameter: 50 mm Quill Travel: 140 mm Quill Taper: MK 4 Motor Power: 5.5 kW (7.5 HP) Machine Dimensions (W x D x H): 2590 x 1050 x 1600 mm Weight approx.: 1325 kg Features • Supplied as standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control; the set speed is displayed digitally • Prism bed made of cast iron, inductively hardened and precision ground • Central, user-friendly feed and threading controls with lead and feed shaft • Modern headstock bearings with high-precision angular contact ball bearings • Equipped as standard with frequency inverter and 3-axis digital readout • Hardened and ground gears and shafts, including the feed gearbox • Simple, smooth, and precise speed and feed adjustment • Traversable tailstock for taper turning, handwheel with adjustable fine scale (0.02 mm) • Removable gap enables machining of large-diameter workpieces Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw steel chuck PO3-200 mm / D6 Kdjdpfxexl Ta Se Al Nsk • Faceplate 350 mm • Fixed steady rest – max. Ø 135 mm • Travelling steady rest – max. Ø 65 mm • Foot pedal with brake function according to CE • Four-way tool post • Safety device for four-way tool post • Micrometer longitudinal stop • Turret stop with fine adjustment • Frequency inverter • Initial fill with Shell Tellus 46 • Coolant system • Slip clutch • Threading dial • LED machine lamp • Change gears • Reducing sleeve • 2 centres • Chip guard • Operating tools

Stanje: novo, Bernardo Universal Lathe Titan 560 x 3000 Pro Vario Technical Specifications Centre distance: 3000 mm Centre height: 280 mm Swing over bed: 560 mm Swing over gap: 785 mm Swing over cross slide: 350 mm Bed width: 350 mm Spindle bore: 105 mm Kdjdpfx Aloxl Tdqs Nek Spindle mount: DIN 55029, D1 – 8 Speed range: 25 – 220 / 220 – 1500 rpm Longitudinal feed range (42): 0.055 – 3.061 mm/rev Cross feed range (42): 0.025 – 1.384 mm/rev Metric threads (41): 0.1 – 14 mm Inch threads (60): 2 – 112 TPI Quill diameter: 75 mm Quill travel: 185 mm Quill taper: MT 5 Motor power: 7.5 kW (10.0 HP) Machine dimensions (length): 4340 mm Width x Height: 1150 x 1610 mm Weight: approx. 3000 kg Features • Standard-equipped with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control, with digital speed display • Versatile applications in general engineering, production, single-part manufacturing, etc. • Removable gap bridge enables machining of large-diameter workpieces • Rapid traverse (longitudinal and cross) as standard to reduce secondary times • Modern main spindle bearing with precision angular ball bearings • One-piece cast bed provides maximum rigidity and low vibration, meeting the prerequisite for precise turning • Tailstock adjustable for taper turning • Centralized lubrication for carriage Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-315 mm / D8 • Fixed steady rest – max. diameter 180 mm • Travelling steady rest – max. diameter 120 mm • Foot pedal with braking function, CE compliant • Safety guard for quick-change toolpost • LED machine lamp • Initial fill with Shell Tellus 46 • Faceplate 450 mm • 2 live centers • Frequency inverter • Digital speed display • Overload clutch • Rapid traverse (longitudinal and cross) • Coolant system • Quick-change toolpost with 4 holders • Change gears • Reducing sleeve • Chip guard • Operating tools

Stanje: novo, Bernardo Gear-driven Pillar Drilling Machine GB 55 NC Vario Technical Specifications - Drilling capacity in steel: 50 mm - Drilling capacity in cast iron: 60 mm - Maximum thread cutting: M42 - Drill chuck: 1 – 13 mm / B 16 - Morse taper: MK 4 - Spindle speed / 2 steps: 50 – 316 / 316 – 2200 rpm - Feed range: 0.08 / 0.12 / 0.17 / 0.24 / 0.35 / 0.50 mm/rev - Throat depth: 360 mm - Max. distance spindle / table: 580 mm - Distance spindle / base plate: 1185 mm - Quill stroke: 225 mm, 180 mm - Column diameter: [missing, please specify] - Table size / T-slot size: 570 x 480 mm / 14 mm - Working area base plate: 435 x 445 mm - Motor power: 3.0 kW - Machine dimensions (W x D x H): 750 x 1020 x 2340 mm - Weight: approx. 630 kg Scope of Delivery - Keyed drill chuck 1 – 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reduction sleeves: MK4/3, MK4/2, MK3/1 - Motorized table lift Koderivbvspfx Al Nsdk - Coolant system - Touchscreen - Automatic tool ejector - Electromagnetic spindle feed - Thread cutting device - Initial fill with Shell Tellus 46 - LED machine light - Digital speed display - Digital drilling depth display - Height-adjustable safety cover

Stanje: novo, Bernardo Universal Lathe Smart 410 x 1000 Pro Vario Technical Specifications Centre Distance: 1000 mm Centre Height: 210 mm Swing Over Bed: 420 mm Swing Over Gap: 580 mm Swing Over Cross Slide: 255 mm Bed Width: 250 mm Spindle Bore: 52 mm Spindle Mount: DIN 55029, D1 – 6 Speed Range, 2 Steps: 30 – 550 / 550 – 3000 rpm Longitudinal Feeds (17): 0.05 – 1.7 mm/rev Cross Feeds (17): 0.025 – 0.85 mm/rev Metric Threads (42): 0.2 – 14 mm Imperial Threads (45): 2 – 72 TPI Quill Diameter: 50 mm Quill Travel: 140 mm Quill Taper: MT 4 Motor Power: 5.5 kW (7.5 HP) Machine Dimensions (W x D x H): 2090 x 1050 x 1600 mm Approx. Weight: 1145 kg Features • Supplied as standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control; set speed is shown on digital display • Prism bed made of cast iron, inductively hardened and precision ground • Central, user-friendly controls for feeds and threading via leadscrew and feed shaft • Modern main spindle bearing with precision angular contact bearings • Standard equipment includes frequency inverter and 3-axis digital readout • Hardened and ground gears and shafts, also in the feed gearbox • Speed and feed selection are simply designed, smooth, and precise to operate • Sliding tailstock for taper turning, handwheel with adjustable fine scale (0.02 mm) • Removable bridge allows machining of workpieces with large diameters Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw steel chuck PO3-200 mm / D6 • Face plate 350 mm • Fixed steady rest – max. passage diameter 135 mm • Travelling steady rest – max. passage diameter 65 mm • Foot pedal with CE brake function • Four-way tool post • Safety guard for four-way tool post • Micrometer longitudinal stop Kdedpfxexl Taro Al Njk • Turret stop with fine adjustment • Frequency inverter • Initial filling with Shell Tellus 46 • Coolant system • Slip clutch • Thread dial indicator • LED machine lamp • Change gears • Reducing sleeve • 2 centre points • Chip guard • Operating tools

Stanje: novo, Bernardo Universal Lathe Solid 460 x 1000 Pro Vario Technical Specifications Centre distance: 1000 mm Centre height: 230 mm Swing over bed: 460 mm Swing over gap: 690 mm Swing over cross slide: 270 mm Bed width: 300 mm Spindle bore: 80 mm Spindle mount: DIN 55029, D1-8 Spindle speed range: 25 – 250 / 250 – 1700 rpm Longitudinal feed range (42): 0.055 – 3.065 mm/rev Cross feed range (42): 0.025 – 1.386 mm/rev Metric threads (41): 0.1 – 14 mm Imperial threads (60): 2 – 112 TPI Tailstock quill diameter: 60 mm Tailstock quill travel: 130 mm Tailstock taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (L x W x H): 2300 x 1080 x 1600 mm Weight approx.: 1730 kg Kjdpfx Alsxl Tcae Njdk Features • Modern main spindle bearing with precision angular contact ball bearings • Standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control, set speed readable on digital display • Hardened and ground gears and shafts, including in the feed gearbox • Rapid traverse (longitudinal and cross) as standard to reduce idle times • Central, ergonomic controls for feeds and threading, with lead screw and feed shaft • Gears are large, hardened, and ground to precision • Speed and feed adjustment is simple, smooth, and precise • The machine bed is cast in one piece, extremely torsion-resistant and low-vibration, providing the basis for precise turning operations Scope of delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Fixed steady rest – max. passage diameter 150 mm • Travelling steady rest – max. passage diameter 110 mm • First fill with Shell Tellus 46 • Faceplate 450 mm • Quick-change tool post with 4 holders • Safety guard for quick-change tool post • Foot pedal with brake function according to CE • Coolant system • Frequency inverter • Safety slip clutch • Rapid traverse (longitudinal and cross) • Change gears • Reducing sleeve • 2 centre points • Thread dial indicator • LED machine light • Chip guard at rear • Operating tools

Stanje: novo, Bernardo Gear-Driven Drill Press GB 35 Vario Technical Specifications Drilling capacity in steel: 35 mm Drilling capacity in cast iron: 40 mm Maximum tapping capacity: M24 Drill chuck: 1 - 13 mm / B 16 Morse taper: MK 4 Spindle speed / 2 ranges: 65 - 460 / 460 - 3250 rpm Feed range: 0.1 / 0.2 / 0.3 mm/rev Throat depth: 320 mm Maximum distance spindle/table: 580 mm Distance spindle/base plate: 1145 mm Quill travel: 160 mm Column diameter: 120 mm Table size / T-slot size: 500 x 420 mm / 14 mm Base plate working area: 365 x 370 mm Motor output S1 100%: 1.5 kW Motor input S6 40%: 2.2 kW Machine dimensions (W x D x H): 600 x 870 x 2170 mm Approx. weight: 375 kg Scope of delivery • Key-type drill chuck 1 - 13 mm / B 16 Kdjdpfx Alsd Du Tye Nok • Drill chuck arbor MK 4 / B 16 • Reduction sleeve MK 4 / 3, MK 4 / 2 • Coolant system • Tapping unit • Electromagnetic spindle feed • Automatic tool ejector • LED machine lamp • Initial fill with Shell Tellus 46 • Digital speed display • Height-adjustable safety guard

Stanje: novo, Bernardo Universal Lathe Solid 460 x 1500 Pro Vario Technical Specifications Center Distance: 1500 mm Center Height: 230 mm Swing diameter over bed: 460 mm Swing diameter over gap: 690 mm Swing diameter over cross slide: 274 mm Bed width: 300 mm Spindle bore: 80 mm Spindle mount: DIN 55029, D1-8 Speed range, 2 steps: 25 - 250 / 250 - 1700 rpm Longitudinal feed range: (42) 0.031 - 1.7 mm/rev Cross feed range: (42) 0.014 - 0.784 mm/rev Metric threads: (41) 0.1 - 14 mm Inch threads: (60) 2 - 112 TPI Quill diameter: 60 mm Quill stroke: 130 mm Quill taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 2750 x 1080 x 1370 mm Weight approx.: 2050 kg Kjdpfx Aonfu Amjl Nsdk Scope of Delivery 3-axis digital readout ES-12 V with LCD display 3-jaw chuck PS3-250 mm / D8 Fixed steady rest - max. pass-through diameter 150 mm Travelling steady rest - max. pass-through diameter 110 mm First fill with Shell Tellus 46 Face plate 450 mm Quick-change toolpost with 4 holders Safety device on quick-change toolpost Foot pedal with CE-compliant brake function Coolant system Frequency inverter Slip clutch Change gears Reducing sleeve 2 dead centers Thread dial indicator LED machine lamp Chip guard/rear splash guard Operating tools Rapid traverse longitudinal and cross

Stanje: novo, Drilling capacity in steel (diameter): 35.0 mm Drilling capacity in cast iron: 40.0 mm Throat depth: 320 mm Tapping capacity in steel: M 24 Morse taper: 4 MT Quill stroke: 160 mm Spindle speed: 65 - 3250 rpm Table: 500 x 420 mm Throat depth: 320 mm Weight: 375 kg Dimensions (L x W x H): 600 x 870 x 2,170 mm Features: - Infinitely variable speed control, ideal for setting the desired cutting speed - Automatic tool ejector and threading device as standard - Electromechanical feed, adjustable from 0.1 - 0.3 mm/rev - Heavy-duty grey cast iron table with rotatable and tiltable work surface - T-slots in the machine base enable clamping of large workpieces Kodpfsxaabrex Al Nsdk - Guaranteed concentricity ≤ 0.02 mm, measured at the quill - Hardened and ground gears ensure smooth operation - Adjustable drilling depth stop with easy-to-read scale Scope of delivery: - Keyed drill chuck 1 - 13 mm / B 16 - Drill chuck arbor MT 4 / B 16 - Reducing sleeves MT 4 / 3, MT 4 / 2 - Coolant device - Thread cutting device - Electromagnetic spindle feed - Automatic tool ejector - LED machine lamp - First filling with Shell Tellus 46 - Digital speed display - Height-adjustable safety guard

Stanje: novo, Leto izdelave: 2026, premer struženja nad prečnim suportom: 255 mm, izvrtina vretena: 52 mm, premer struženja: 420 mm, stružna dolžina: 1.000 mm, največja hitrost vretena: 3.000 obr/min, hitrost vretena (min.): 30 obr/min, skupna masa: 1.145 kg, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, The Smart 410 Pro Vario universal lathe is a professional device designed for light and medium-duty turning operations. By combining advanced electronics with robust mechanics, this model provides the ideal solution for mechanical workshops, tool rooms, and maintenance departments. Features: - Induction-hardened and precisely ground cast iron bed - Mechanical foot brake reduces downtime - Removable bridge allows machining of larger workpieces Kdjdeyr I Sqjpfx Al Njk - Quiet, smooth operation thanks to hardened and ground gearbox gears - Simple and fast adjustment of feeds and speeds - Sturdy construction ensures vibration-free operation - Tailstock system with sliding arrangement for taper turning, handwheel with precise graduations (0.02 mm) - Centralized feed and threading system using a leadscrew and leadscrew shaft - Modern main spindle bearing system with precision angular ball bearing - 3-axis digital readout included - Infinitely variable spindle speed based on inverter with digital readout, ensuring perfect adjustment to the workpiece Technical Data: - Distance between centers: 1000 mm - Center height: 210 mm - Swing over bed: 420 mm - Swing with bridge removed: 580 mm - Swing over cross slide: 255 mm - Bed width: 250 mm - Spindle bore: 52 mm - Spindle mounting taper: DIN 55029, D1-6 - Spindle speed min.: 30 rpm - Spindle speed max.: 3000 rpm - Speed change – range/steps: stepless (30 – 550 / 550 – 3000) - Longitudinal feed range (17): 0.05 – 1.7 mm/rev - Cross feed range (17): 0.025 – 0.85 mm/rev - Metric threads (42): 0.2 – 14 mm - Inch threads (45): 2 – 72 TPI - Tailstock quill diameter: 50 mm - Tailstock quill travel: 140 mm - Tailstock taper: MK 4 - Motor power: 5.5 kW - Voltage: 400 V - Dimensions (W x D x H): 2090 x 1050 x 1600 mm - Weight approx.: 1145 kg Standard Accessories: - 3-jaw chuck DK11-200 mm / D6 - Faceplate 350 mm - Fixed steady rest – max passage 135 mm - Follow rest – max passage 65 mm - Coolant system - Four-way tool post - Micrometric longitudinal stop - Thread dial indicator - Magnetic brake according to CE standard - Electromechanical spindle brake - Filled with Shell Tellus 46 oil - Halogen work light - Change gears - 2 dead centers - Chip tray - Service tools - 3-axis digital readout - Infinitely variable spindle speed control - Legally required safety guards - Complete technical documentation (DTR) in Polish - CE certificate - 24-month warranty for all components with no surcharges

Stanje: novo, Drilling capacity in steel (diameter): 32.0 mm Tapping: M22 Kedpfx Aexabiqjl Nsdk Drill stroke: 125 mm Throat depth: 280 mm Morse taper: 3 MT Table: 450 x 380 mm / 14 mm T-slot Spindle speed: 70 – 3,500 rpm Feed rate: 0.1 / 0.2 / 0.3 mm/rev Column diameter: 110 mm Weight: 320 kg Dimensions (L x W x H): 500 x 800 x 2,100 mm Total power requirement: 1.1 / 2.2 kW Features - Infinitely variable speed control, ideal for setting the desired cutting speed - Automatic tool ejector and tapping device supplied as standard - Electromechanical feed, adjustable from 0.1 – 0.3 mm/rev - Heavy-duty cast iron table with a rotary and tilting work surface - T-slots on the machine base allow clamping of tall workpieces - Guaranteed run-out accuracy = 0.02 mm, measured in the quill - Hardened and ground gears ensure smooth operation - Adjustable drilling depth stop with easy-to-read scale Scope of delivery: - Drill chuck arbor MT3 / B16 - Reduction sleeve MT3/2, MT3/1 - Key-type drill chuck 1 – 13 mm / B16 - Coolant system - Electromagnetic spindle feed - Tapping device - Automatic tool ejector - LED machine light - Digital speed display - First fill with Shell Tellus 46 - Height-adjustable safety cover

Stanje: novo, Hydraulic pipe S235JR: 54 x 4 mm Aluminium pipe: 54 x 5 mm Steel pipe: 54 x 2 mm Stainless steel pipe AISI 304/316: 42 x 3 mm Copper or brass pipe: 54 x 4 mm Gas pipe for pipelines: 1 1/2" Max. bending angle: 180° Max. bending radius: 150 mm Motor power: 1.1 kW Voltage: 400 V Machine dimensions (W x D x H)*: 700 x 230 x 520 mm Weight approx.: 107 kg Kedpfxecvvc Hs Al Nedk *without base frame. Base frame not included in scope of delivery. Available at extra cost.

Stanje: novo, Drilling capacity in steel (diameter): 25.0 mm Throat depth: 180 mm Drilling stroke: 80.0 mm Morse taper: 2 MT Speed range: 180 - 2270 rpm Table size: 305 x 305 mm tiltable +/- 45 degrees T-slots: 16.0 mm Column diameter: 72.0 mm Operating voltage: 400 V Total power requirement: 1.10 kW Weight: 57.0 kg Dimensions (L x W x H): 400 x 630 x 990 mm Description: - Equipped as standard with digital quill stroke display and work light - High running smoothness thanks to cast iron pulleys Kjdpoxaa Thsfx Al Nedk - High-quality ball bearings ensure excellent concentricity of the quill - Large-size drill table with diagonally arranged T-slots - Drill table tiltable (± 45°), height adjustment via rack and pinion - Rotation direction switch for forward and reverse - Powerful and high-torque aluminium motor to IP 54 - Precision quick-action drill chuck included - Supplied as standard with T-slots in the ground base plate - Ergonomic handles for comfortable operation Scope of delivery: - Quick-action drill chuck 1 - 16 mm / B 18 - Drill chuck arbor MT 2 / B 18 - Digital quill stroke display - Machine work light - Forward/reverse rotation - Safety cover - Height-adjustable safety cover - T-slot nuts - Operating tools

Stanje: novo, Turning length 1500 mm Turning diameter 560 mm Turning diameter over support 350 mm Spindle speeds 25-220/220-1500 rpm Swing diameter over bed saddle 350 mm Kdodpfx Aljxaau Es Njk Turning diameter in gap 785 mm Tailstock quill travel 185 mm Spindle bore 105.0 mm Motor power 7.5 kW Spindle mount DIN 55029 D 1-8 Tailstock quill: MT 5 Machine weight approx. 2420 kg Dimensions L-W-H 2840 x 1150 x 1610 mm Description: - Equipped as standard with Delta frequency inverter for high torque at low speeds and nearly constant spindle speed under load - Infinitely variable speed control; set speed is displayed digitally - Versatile applications in general mechanical engineering, production, single-part manufacturing, etc. - Removable bridge allows machining of workpieces with large diameters - Standard with rapid traverse (longitudinal and cross) for reduced non-productive times - Modern main spindle bearing with precision angular contact ball bearings - One-piece cast machine bed, highly torsion-resistant and low in vibration - Tailstock offset for taper turning - Central lubrication for the bed carriage Equipment: - 3-axis digital readout ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - Fixed steady rest – max. passage diameter 180 mm - Travelling steady rest – max. passage diameter 120 mm - Foot pedal with brake function according to CE - Safety guard on quick-change toolpost - LED machine lamp - Initial fill with Shell Tellus 46 - Face plate 450 mm - 2 center points - Frequency inverter - Digital speed display - Slip clutch - Rapid traverse longitudinal and cross - Coolant system - Quick-change toolpost with 4 holders - Change gears - Reducing sleeve - Chip guard/rear wall - Operating tools