Bernardo Bm 20 Vario nakup rabljenega (208)

Stanje: novo, Drilling capacity in steel (diameter): 50.0 mm Throat depth: 350 - 1,590 mm Max. workpiece height: 645 - 1,240 mm Spindle speed: 25 - 2,000 rpm Spindle taper: MT 5 Base plate: 980 x 1,600 mm Tapping capacity: M42 Quill stroke: 320 mm Total power requirement: 4.0 kW Machine weight approx.: 3,500 kg Dimensions L-W-H: 2,450 x 980 x 2,840 mm Description - Large-size base plate - Ideally suited for machining large workpieces - Thick-walled, ground column for increased slide properties of the arm - Arm and drill head with independent hydraulic clamping Fsdpjxaad Tjfx Abvjfw - Simple arm height adjustment via lifting motor - Ideal for drilling, countersinking, reaming, and tapping - Hardened and ground gears running in oil bath - Excellent sliding characteristics of the drill head along the arm due to ground surface Scope of delivery - Cube table - Reducing sleeves MT 5/4, MT 4/3, MT 3/2 - LED machine lamp - Initial filling with Shell Tellus 46 - Coolant system - Lifting motor - Hydraulic motor - Operating tools - Height-adjustable safety cover

Stanje: novo, Grinding width: 32.0 mm Maximum grinding wheel diameter: 250 mm Grinding wheel dimensions: 250 x 32 x 32 mm Speed: 2850 rpm Grit: K 36 / K 80 Motor power: 1.5 kW Voltage: 400 V Weight: 30.0 kg Dimensions (LxWxH): 510 x 320 x 360 mm Features: - ON-OFF switch to IP54 standard with undervoltage release Ffsdpfx Asxaa Aiebvsw - Extended application range with optionally available grinding attachment - Versatile use for a wide variety of materials (metal, plastic, etc.) - Smooth operation thanks to balanced rotor with quality ball bearings - Includes copper-wound motor for long service life - Large protective screens provide optimal protection against sparks - Stable and adjustable workpiece support made of cast iron - High pulling power due to powerful drive motor Scope of delivery: - Coarse grinding wheel K 36 - Fine grinding wheel K 80 - Double-sided spark protection - Workpiece support

Stanje: novo, Cutting capacity at 90° (round): approx. 100 mm Ffjdpexaa Apjfx Abvow Cutting capacity at 45° (round): approx. 65.0 mm Cutting capacity at 90° (flat): 100 x 150 mm Cutting capacity at 45° (flat): 60 x 100 mm Saw blade dimensions: 1470 x 13.0 x 0.65 mm Voltage: 230 V Band speed: 45.0 m/min Weight: 26.0 kg Dimensions (L x W x H): 700 x 320 x 420 mm The mobile bandsaw EBS 100 C is the ideal machine for on-site installation work on construction sites. Its smooth and vibration-free operation enables precise cuts. SOLVES MANY SAWING PROBLEMS ON THE CONSTRUCTION SITE Dry cutting (no coolant required) - Outstanding price-performance ratio thanks to a wide range of applications - Includes workpiece stop for efficient operation - Adjustable saw bow for mitre cuts up to 45° - Ideal for construction site use due to its low weight - Standard version includes integrated chip collection container - Optimum cutting results due to ball-bearing saw blade guide - Quick-release vice included in delivery Scope of delivery - Saw blade - Workpiece stop - Quick-release vice - Ergonomic handle - Chip collection container

Stanje: novo, Pressure 50 t Stroke 200 mm Table surface 730 x 205 mm Installation height 1050 mm Frame gap between guides 730 mm Machine weight approx. 288 kg. Description: - Standard with winch - For easy height adjustment of the support table - Piston feed selectable manually or pneumatically Fsdpfoxaa Ixox Abvsfw - Powerful workshop presses for craft and repair operations - Optimal price-performance ratio due to efficient design - Standard foot pedal keeps hands free for the workpiece - Extended application range with the optionally available 10-piece press pin set - Pressure cylinder with integrated return spring for piston retraction - Welded steel frame for heavy-duty use and high stability - Versatile application thanks to the pressure cylinder, which can be shifted left and right

Stanje: novo, Turning length 1000 mm Swing diameter 380 mm Fodpfx Abjxabv Rsvofw Swing diameter over gap 490 mm Spindle bore 51.0 mm Spindle speed 70 - 2000 rpm Bed width 185 mm Spindle mount 55029 D 1-5 Tailstock taper 4 MT Quill travel 120 mm Total power requirement 1.5 / 2.2 kW Machine weight approx. 575 kg Dimensions (L x W x H) 1920 x 800 x 1660 mm Description: The Master 380 lead and feed screw lathe impresses with its sturdy construction and easy operation. Even the standard equipment includes all essential accessories (3-axis digital readout, steadies, LED machine lamp, CE-compliant safety features, etc.). Features: - 3-axis digital readout i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, according to DIN 55029 - Fixed steady rest – maximum bore diameter 70 mm - Traveling steady rest – maximum bore diameter 50 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip pan - Clamping plate 320 mm - Four-way tool post - Guard for four-way tool post - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gears - 2 live centers - Foot pedal with braking function according to CE - Motor with magnetic brake according to CE standard - Base with drawers - Operating tools

Stanje: novo, Pressure 5.0 t Fodpfxjxabxfj Abvjfw Outreach 215 mm Workpiece height - max. 445 mm Mandrel diameter 50 x 50 x 645 mm Table plate: Ø 275 mm Total connected load manual kW Machine weight approx. 160 kg Space requirement approx. 370 x 550 x 810 mm Description: - For pressing in and out of bearings, bushings, ... - The main body of the DP 5 model is made from high-quality cast iron - Includes mounting holes, ideal for securing to a workbench - Suitable for bush removal, straightening, bending, broaching, ... - Lever arm can be adjusted depending on required force - Ideally suited for repair shops and general workshop use

Stanje: novo, max. cutting capacity for mild steel: 6.5 mm (ST 40) max. cutting capacity for stainless steel: 3.5 mm (VA) Angle adjustment: infinitely variable up to 90° Blade length: 250 x 250 mm Table: 810 x 750 mm Working height: 950 mm Motor power: 4.0 kW Weight: 630 kg Dimensions (L x W x H): 810 x 750 x 1150 mm Features: - Notching with burr-free cuts, no deformation of cutting edges - Cutting blades made from surface-hardened tool steel - Operated via foot pedal, both hands remain free for material handling - Large working table with integrated scales Ffjdpfx Aboxcux Djvjw - T-slots for precise guidance of the adjustable material stops - Safety guard in front of the cutting blade for high safety Scope of delivery: - 1 set of cutting blades - 2 adjustable material stops - Plexiglas safety cover - Foot pedal with emergency-stop switch

Stanje: novo, Square steel 16 x 16 mm Flat steel 100 x 5 mm Angle steel 60 x 8 mm Minimum bending radius 190 mm Round steel 18.0 mm Machine weight approx. 33.0 kg. Features: - For precise cold and hot bending of flat, round, and square steels - Robust design for bolting to the workbench - Continuously adjustable bending stop with locking pin - With eccentric quick-clamping for efficient operation - Readable bending angle up to 120° - High repeat accuracy thanks to bending angle stop - Ideal for repair shops and metalworking shops Bending capacity cold hot Flat steel 100 x 5 mm 100 x 15 mm Fedpfxjxcux Rj Abvofw 65 x 10 mm 75 x 20 mm Round steel 18 mm 27 mm Square steel 16 x 16 mm 25 x 25 mm Angle steel 60 x 8 mm 100 x 12 mm Scope of delivery: - Sharp / round bending plate - Radius bending plate R 20 / R 25 - Set-off block - Bending plate for round bar - Set-off plate - Radius bending plate R 10 / R 15 - Angle stop - Clamping block with eccentric clamp - Material stop

Stanje: novo, x-travel 1000 mm y-travel 360 mm z-travel 400 mm Spindle mount: ISO 40 Table: 1370 x 320 mm Feed rate: Horizontal 80 - 830 / Vertical 23-625 mm/min Spindle speed: Horizontal 35 - 1500 / Vertical 45 - 1660 rpm Distance spindle / table: Horizontal 30 - 430 / Vertical 210-610 mm Rapid traverse Z-axis: 750 mm/min Overhang: 305 - 805 mm T-slots: 3 x 14.0 mm Table - swiveling: ° Max. workpiece weight: 300 kg Coolant pump: 25.0 L/min Total power requirement: 7.6 kW Machine weight approx.: 1540 kg Dimensions (LxWxH): 1840 x 1830 x 2050 mm The universal milling machine UWF 130 Servo is a further development of the well-known UWF 130. Thanks to the milling head "HURON", which can be adjusted to any angular position, and a travel of 1000 mm on the x-axis, this machine is highly versatile. A special feature of this model is the rapid traverse and 8-step feeds on all axes, driven by a servomotor ("SERVO" version). - Large-sized rectangular guideways on y- and z-axis for increased stability - 8 automatic feeds and rapid traverse on all axes, driven by servomotor - Universal milling head, Huron system, adjustable to any angle position Ffsdpfx Aexaagnebvjw - Swiveling control panel with ergonomically positioned switches - Heavy cast iron machine base for vibration-free operation - High running smoothness due to hardened and oil-bath lubricated gear wheels - Overarm with clearly arranged gearbox for spindle speed adjustment - Digital position indicator for x-, y- and z-axis included as standard - Precision surface-machined cross table with T-slots Scope of delivery - 3-axis digital display ES-12 H with LCD display - Drawbar M16 - LED machine lamp - Feed for x-, y-, and z-axis - Coolant system - Counter bearing - Long milling arbor ISO 40 / 27 mm - Combination milling arbor ISO 40 / 27 mm - Coolant tray - Adjustable safety guard - Central lubrication for x-, y-, and z-axis - Operating tools

Stanje: novo, Drilling capacity in steel (diameter): 50.0 mm Throat depth: 370 mm Drilling stroke: 250 mm Morse taper: 4 MT Table: 600 x 500 mm Thread cutting: M 42 steel Spindle speed: 40 - 2100 rpm Feed: 0.1 - 0.4 mm/rev Column diameter: 200 mm Distance spindle/table max.: 600 mm Distance spindle/base plate max.: 1190 mm Total power requirement: 2.2 / 2.8 kW Weight: 670 kg Dimensions (L x W x H): 1020 x 750 x 2340 mm The GB 50 HS geared column drilling machine stands out due to its high drilling capacity of 50 mm, robust construction, and comprehensive standard equipment. This model is therefore ideally suited for use in industrial manufacturing and series production. Features - Motorized table lift to reduce non-productive times - Heavy-duty, vibration-free design for precise operation - Stable, precision-ground steel column for high load tolerance - Digital display for spindle speed and drilling depth - Solid cast iron table with rotatable and tiltable support surface - Increased cost-effectiveness thanks to extensive standard equipment - Hardened and ground gears ensure exceptionally smooth running - 4x automatic spindle feeds selectable via electromagnetic clutch - Standard with tapping device and automatic tool ejector Scope of delivery - Key-type drill chuck 1 - 13 mm / B 16 - Drill chuck arbor MT 4 / B 16 - Reducing sleeves MT 4 / 3, MT 4 / 2 - Motorized table lift - Coolant device - Electromagnetic spindle feed - Tapping device - Automatic tool ejector - LED machine lamp - Initial fill with Shell Tellus 46 - Digital speed display Ffsdpfx Abexaay Ievew - Digital drilling depth display - Height-adjustable safety cover

Stanje: novo, Turning length 1000 mm Swing diameter 360 mm Swing diameter over cross slide 220 mm Swing diameter in gap 502 mm Spindle bore 52.0 mm Spindle speed 70 - 2,000 rpm Bed width 185 mm Spindle mount 55029 D 1-5 Tailstock taper 3 MT Quill travel 100 mm Total power requirement 1.5 / 2.2 kW Machine weight approx. 575 kg Dimensions L-W-H 1825 x 750 x 1600 mm Features: - To minimize vibration influences, the solid prismatic bed is additionally reinforced with webs. - Standard 52 mm spindle bore for machining large shaft diameters. - Optimally suited for machining steel, non-ferrous metals, and plastics. - Removable gap bridge for machining large-diameter workpieces. - Space-saving installation thanks to forward-pull-out chip tray. - The speed and feed adjustment is simple, smooth-running, and precise. - Electromechanical foot brake to reduce auxiliary times. - Modern main spindle bearing with precision angular contact ball bearings. - Prismatic bed made of cast iron, induction hardened and precision ground. - Guaranteed spindle nose concentricity accuracy (= 0.009 mm). - Main spindle hardened and ground, running in an oil bath. - Tailstock, headstock, and all guides are adjustable. - Tailstock can be offset ±5 mm for taper turning. Fjdpfx Asxaaz Eebvefw Scope of delivery: - 3-axis digital readout i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, according to DIN 55029 - Fixed steady rest – max. pass-through diameter 70 mm - Travelling steady rest – max. pass-through diameter 60 mm - Coolant system - Initial fill with Shell Tellus 46 - Pull-out chip tray - Clamping plate 280 mm - Four-way tool post - Safety device for four-way tool post - Slip clutch - Micrometer longitudinal stop - Thread dial indicator - LED machine lamp - Reducing sleeve - Change gears - 2 centre points - Foot pedal with brake function according to CE - Motor with magnetic brake according to CE standard - Base frame with drawers - Operating tools

Stanje: novo, x-travel: 600 mm y-travel: 250 mm z-travel: 400 mm Spindle taper: ISO 40 Table: 1120 x 260 mm Feed rate: 24 - 402 mm/min Spindle speed: 45.0 - 1660 rpm Distance spindle/table: 175 - 520 mm Rapid traverse Z axis: 660 mm/min Overhang: 0 - 550 mm Total power requirement: 2.2 kW Weight of machine: approx. 1380 kg Dimensions LxWxH: 1570 x 1470 x 1660 mm The universal milling machine UWF 110 is suitable for performing light to medium-duty milling operations. Thanks to its high versatility and simple conversion, it can be successfully used in workshops for machining small and medium batch sizes. Equipment: - Universal milling head, adjustable to any angular position - Swiveling control panel with ergonomically positioned switches - Heavy-duty machine base made of cast iron for vibration-free operation - Dovetail guideways with adjustable gibs on all 3 axes - High running smoothness due to ground, oil-bath-lubricated gearbox gears - Positioning motor for Z axis included in delivery - Standard with automatic table feed on X and Y axes - Precisely surface-machined cross table with T-slots - Digital position display for X, Y, and Z axes included Scope of delivery: - 3-axis digital readout ES-12 H with LCD display - LED machine lamp - Coolant system - Central lubrication - Counter bearing - Long milling arbor 32 mm - Feed for X and Y axes - Positioning motor for Z axis - Coolant tray - Adjustable safety guard Ffjdpfx Ajxaa Hzobvow - Operating tools

Stanje: novo, Cutting diameter: 225 mm Saw blade length: 2480 mm Table height: 910 mm Cutting range at 90° (flat): 245 x 150 mm Cutting range at 90° (square): 200 x 200 mm Cutting range at 45° (round): 160 mm Cutting range at 45° (square): 160 x 160 mm Cutting range at 60° (round): 100 mm Cutting range at 60° (square): 100 x 100 mm Speed range: 45/90 m/min Saw blade dimensions: 2480 x 27 x 0.9 mm Total power requirement: 1.5 kW Machine weight: approx. 200 kg Required space: approx. 1430 x 720 x 1700 mm Features: - Suitable for cutting profiles, tubes, and solid materials made of iron and non-ferrous metals - Saw bow can be swiveled up to 60° for miter cuts - Stepless lowering control via hydraulic descent cylinder Fedpfx Aboxaa Tbjvsfw - Torsion-resistant, heavy-duty saw arm made of cast iron - 2-band speeds for optimal cutting results (400 V) - Robust construction for smooth and low-vibration operation - Automatic cut-off after material is fully cut - Heavy-duty cast-iron vise with quick-release mechanism - Ball-bearing saw blade guide with quick adjustment to adapt to the workpiece width ensures optimal working results Scope of delivery: - Saw blade - Workpiece stop - Base frame - Pressure gauge for blade tension - Vise with quick-release mechanism - Coolant device - Hydraulic descent cylinder - Motor protection switch - Automatic cut-off

Stanje: novo, Turning length 3000 mm Swing diameter 800 mm Swing diameter in the gap 1000 mm Swing diameter over cross slide 540 mm Spindle speed 25 - 1600 rpm Quill: Morse taper 5 Quill travel 235 mm Spindle bore 105.0 mm Fjdpfx Aexabcdebvsfw Motor power 7.5 kW Spindle mount DIN 55029 D 1-8 Machine weight approx. 3820 kg Dimensions 4800 x 1320 x 1580 mm Features - Versatile applications in general mechanical engineering, production, and single-part manufacturing - Central, ergonomic feed and thread selection with leadscrew and feedscrew - Prism bed made of cast iron, induction-hardened and precision-ground - Modern main spindle bearings with precision angular contact roller bearings - Hardened and ground gears and shafts, including in the feed gearbox - Rapid traverse longitudinal and cross as standard for reduced non-productive times - Large spindle bore (105 mm) for workpieces of large diameter - Smooth start-up via mechanical multi-plate clutch - Electromechanical foot brake to minimize auxiliary times - Optimum cutting performance, even during facing operations - Bed equipped with robust ribs for maximum rigidity and reduced vibration influence Scope of delivery - 3-axis digital readout ES-12 V with LCD display - Cable management via energy chain - 3-jaw chuck PS3-315 mm / D8 - Faceplate 500 mm - Fixed steady rest – max. passage diameter 180 mm - Follow rest – max. passage diameter 100 mm - 2 dead centers - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - Initial fill with Shell Tellus 46 - Rapid traverse longitudinal and cross - Overload clutch - Coolant system - Quick-change tool post with 4 holders - Safety device for quick-change tool post - LED machine lamp - Change gears - Reducing sleeve - Chip guard - Operating tools

Stanje: novo, Drilling capacity in steel (diameter): 32.0 mm Thread cutting max.: M24 Ffjdpfx Abjxabxrjvsw Throat depth: 265 mm Drilling stroke: 150 mm Morse taper: 3 MT Speed range: 320 - 1820 rpm Table size: 332 x 332 mm T-slots: 14.0 mm Column diameter: 100 mm Working surface (base plate): 400 x 380 mm Max. spindle-to-base distance: 735 mm Operating voltage: 400 V Total power requirement: 2.2 kW Weight: 246 kg Dimensions (L x W x H): 520 x 920 x 1380 mm Description: - Robust bench drill with thread cutting device - High running smoothness due to cast iron belt pulleys - Drive: V-belt - High-precision spindle run-out thanks to quality ball bearings - Large drill table with diagonally arranged T-slots - Rack-and-pinion table height adjustment - Thread cutting device - Powerful, high-torque aluminium motor, IP54 - Standard T-slots in the ground base plate - Ergonomic handles for comfortable operation - Foldable drill spindle guard - Emergency stop button at the front - Manual drilling depth adjustment - Switch cabinet on the left with main switch

Stanje: novo, Turning length: 3,000 mm Swing diameter: 660 mm Swing diameter in gap: 870 mm Swing diameter over cross-slide: 420 mm Spindle speed: 36 - 1,600 rpm Quill: MT 5 Quill travel: 150 mm Spindle bore: 105.0 mm Motor power: 7.5 kW Spindle mount: DIN 55029 D 1-8 Machine weight: approx. 3,990 kg Dimensions (L x W x H): 4,500 x 1,280 x 1,650 mm - Versatile applications in general mechanical engineering, production, and single-part manufacturing - The machine bed is cast in one piece, offering exceptional rigidity and low vibration—key prerequisites for precise turning operations - Modern main spindle bearing with precision angular contact ball bearings - Central, ergonomically arranged feed and thread controls with leadscrew and feed shaft - Standard rapid traverse longitudinally and for facing to minimize non-productive time - Gears are large, hardened, and precision-ground - Removable gap bridge allows for machining of large diameter workpieces - Sliding tailstock for taper turning, handwheel with vernier scale (0.02 mm) - Electromechanical foot brake to reduce non-productive times - Optimum cutting performance, including for face turning Scope of delivery Ffedpfoxabycox Abvjw - Slip clutch - Rapid traverse longitudinal/facing - LED machine lamp - 3-axis digital readout ES-12 V with LCD screen - 3-jaw chuck PS3-315 mm / D8 - Face plate 630 mm - Fixed steady rest – max. workpiece diameter 250 mm - Travelling steady – max. workpiece diameter 110 mm - 1 dead center / 1 live center - Motor with magnetic brake as per CE standard - Foot pedal with brake function as per CE - Initial fill with Shell Tellus 46 - Coolant system - Quick-change tool post with 4 holders - Safety guard for quick-change tool post - Reducing sleeve - Chip guard - Operating tools

Stanje: novo, Drive power 0.75 kW Angle 45° Speed 10,000 rpm Milling height 4.0 mm Motor 400 Volt Dimensions (L x W x H): 560 x 300 x 450 mm Weight: 44.0 kg Fsdjxab H Nspfx Abvefw Description: - Advantage of the adjustable guide rail: the workpiece remains stationary, preventing scratches - Perfectly suited for deburring and chamfering (visible edges) of various materials such as steel, aluminum, non-ferrous metals, plastics, etc. - Ideal for creating visible edges with outstanding surface finish - High own weight ensures vibration-free operation Scope of delivery: - Adjustable guide rail 500 mm - Milling head - Carbide indexable inserts - Operating tool

Stanje: novo, Turning length 1500 mm Turning diameter 420 mm Swing diameter over bed slide 255 mm Turning diameter in the gap 580 mm Spindle bore 52.0 mm Spindle speed 45 - 1800 rpm Bed width 250 mm Spindle mount DIN 55029 D 1-6 Tailstock taper 4 MT Quill travel 140 mm Total power requirement 3.0 / 4.5 kW Machine weight approx. 1400 kg Dimensions L-W-H 2570 x 900 x 1600 mm The universal lathe Smart 410 Pro is suitable for carrying out light and medium-duty turning operations. The basic equipment already includes all important accessories (3-jaw chuck, steadies, change gears, ...) which makes this machine universally applicable. To reduce production times, this model comes standard with a 3-axis digital readout. Features - Prism bed made of cast iron, inductively hardened and precision ground - Electromechanical foot brake to reduce non-productive times - Central, user-friendly control for feeds & threads with lead and feed shaft - Modern main spindle bearing with precision angular contact ball bearings - The gears are generously dimensioned, hardened and precision ground - Hardened and ground gears and shafts, also in the feed gearbox - Speed and feed selection is simple in design, smooth and precise to operate - Movable tailstock for taper turning - Handwheel with adjustable fine scale (0.02 mm) - The removable bridge allows machining of large-diameter workpieces Equipment: - 3-axis digital readout ES-12 V with LCD display - 3-jaw chuck DK11-200 mm / D6 - Faceplate 350 mm - Fixed steady rest - clearance diam. max. 135 mm - Travelling steady rest - clearance diam. max. 65 mm - Coolant system - Four-way tool post - Safety device for four-way tool post - Micrometer longitudinal stop - Slip clutch - Turret stop with fine adjustment - Thread dial indicator - Motor with magnetic brake according to CE standard - Foot pedal with braking function to CE - Initial filling with Shell Tellus 46 - LED machine light - Change gears - Reducing sleeve Ffjdpjxab Umsfx Abvow - 2 centre points - Chip guard - Operating tools - Operating manual

Stanje: novo, max. Schnittleistung Normalstahl 3.0 mm ST 40 max. Schnittleistung Edelstahl 2.0 mm VA Winkeleinstellung stufenlos von - bis 90.0 Grad Messerlänge 130 x 130 mm Tisch: 640 x 460 mm Arbeitshöhe 900 mm Motorleistung pneumatisch Gewicht 200 kg Abmessung L-B-H 600 x 670 x 1270 mm Ffsdpoxcuxkefx Abvew Eigenschaften : - Ausklinken mit gratfreiem Schnitt, ohne Verformung der Schnittkanten - Maschinenkörper aus hochwertigem Grauguss, Untergestell aus Stahlblech - Schnittmesser aus oberflächengehärtetem Werkzeugstahl - Kraftschonendes Arbeiten durch pneumatischen Antrieb - Bedienung mittels Fußpedal, daher beide Hände frei für das Werkstück - Großdimensionierter Arbeitstisch mit eingearbeiteten Skalen - T-Nuten für exakte Führung der schwenkbaren Anschläge - Schutzabdeckung vor dem Schnittmesser für hohe Sicherheit Lieferumfang - 1x Satz Schnittmesser - 2x schwenkbare Materialanschläge - Plexiglas-Schutzabdeckung - Fußpedal - Untergestell

Stanje: novo, Drilling capacity in steel (diameter): 50.0 mm Reach: 320 - 1,220 mm Workpiece height - max.: 330 - 1,170 mm Spindle speed: 25 - 2,000 rpm Spindle taper: MT 5 Base plate: 1,300 x 980 mm Thread cutting: M42 Quill stroke: 335 mm Total power requirement: 4.0 kW Machine weight approx.: 3,000 kg Dimensions (L x W x H): 2,035 x 1,000 x 2,830 mm Equipment/features: - Large-dimensioned base plate, ideal for machining large workpieces - Thick-walled, ground column for increased sliding properties of the arm - Arm and drilling head with independent hydraulic clamping - Simple height adjustment of the arm via lifting motor - Ideal for drilling, countersinking, reaming, and thread cutting - Hardened and ground gears running in oil bath - Excellent sliding properties of the drilling head on the arm due to ground surface Fedpfsxaaabex Abvsfw Scope of delivery: - Cube table - Drill chuck arbor MT 5 / B16 - Reducing sleeves MT 5/4, MT 4/3, MT 3/2 - LED machine lamp - Initial fill with Shell Tellus 46 - Coolant system - Lifting motor - Hydraulic motor - Operating tools - Height-adjustable safety cover

Stanje: novo, Centre distance: 1000 mm Swing diameter: 360 mm Swing diameter over gap: 480 mm Spindle bore: 51.0 mm Spindle speed: 70 - 2000 rpm Bed width: 185 mm Spindle mount: 55029 D 1-5 Tailstock taper: MT 4 Quill travel: 110 mm Total power requirement: 1.5 kW Machine weight approx.: 540 kg Dimensions (L x W x H): 1920 x 750 x 1600 mm Features: - Standard 51 mm spindle bore for machining large shaft diameters - Ideal for vocational schools, repair shops and training workshops - Optimally suited for machining steel, non-ferrous metals and plastics - Removable gap bridge for machining workpieces with large diameters - Space-saving setup due to chip tray extendable to the front - Speed and feed controls are straightforward, smooth-running and precisely switchable - Electromechanical foot brake for reducing non-productive time - Modern main spindle bearing with precision angular contact ball bearings Ffsdpfx Aboxaawajvjw - Precision-ground prism bed made from cast iron, inductively hardened - One-lever tailstock clamping, adjustable for taper turning - Guaranteed spindle nose runout accuracy (= 0.009 mm) - Main spindle hardened and ground, running in oil bath - Tailstock, headstock and all guides are adjustable Equipment: - 3-axis digital readout i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, per DIN 55029 - Fixed steady rest – max. pass-through diam. 70 mm - Travelling steady rest – max. pass-through diam. 50 mm - Coolant system - Initial fill with Shell Tellus 46 - Extendable chip tray - Clamping plate 320 mm - Four-way tool post - Safety device for four-way tool post - Slip clutch - Micrometer longitudinal stop - Thread dial indicator - LED machine lamp - Reducing sleeve - Change gears - 2 centres - Foot pedal with brake function in accordance with CE - Motor with magnetic brake to CE standard - Machine base - Operating tools

Stanje: novo, Drilling capacity in steel (diameter): 25.0 mm Throat depth: 255 mm Drilling stroke: 120 mm Morse taper: 3 MT Speed range: 105 - 2900 rpm Table size: 395 x 420 mm Column diameter: 100 mm Max. tapping capacity: M10 Operating voltage: 400 V / 50 Hz Weight: 140 kg Dimensions (L x W x H): 500 x 570 x 1100 mm Description: - Digital quill travel display for convenient operation - Drilling head can be rotated 360° and height-adjusted - Large drill table with T-slots - Helical gear transmission for optimal power transfer - Forward/reverse switch for right- and left-hand operation, suitable for tapping - High-quality ball bearings ensure excellent concentricity - Stable, precision-ground steel column designed for heavy-duty use - High efficiency and smooth operation thanks to helical gears - Combination of steel with reinforced fiber material - 8 selectable speed settings via powerful 2-speed drive motor Equipment: - Quick-action drill chuck 1 - 16 mm / B 16 - Drill chuck arbor MT 3 / B 16 - Reducing sleeves MT 3 / 2, MT 3 / 1 - Digital drilling depth display Fodpexaa Dajfx Abvefw - Automatic tool ejector - Forward/reverse switching device - Height-adjustable safety guard

Stanje: novo, Drilling capacity in steel (diameter): 28.0 mm Throat depth: 320 mm Quill stroke: 150 mm Morse taper: 3 MT Table: 500 x 350 mm Speed range: 75 – 3010 rpm Total power requirement: 1.35 / 1.7 kW Weight: 290 kg Dimensions L-W-H: 600 x 700 x 1900 mm Description: - Digital quill travel display for convenient operation - Standard automatic quill feed (0.04 – 0.3 mm/rev) - Helical gearbox for optimal power transmission - High efficiency and smooth operation due to helical gears in combination with steel against reinforced fiber material - Automatic quill feed disengages when the preset drilling depth is reached - Reversing switch for clockwise and counterclockwise rotation, suitable for tapping - Sturdy and ground steel column, designed for heavy-duty operation Fodpfjxaba Aex Abvefw - High-quality ball bearings ensure high concentricity accuracy - 8 selectable speeds via powerful 2-stage drive motor Scope of delivery: - Keyless drill chuck 1 – 16 mm / B 16 - Drill chuck arbor MT 3 / B 16 - Reducing sleeves MT 3 / 2, MT 3 / 1 - Digital drilling depth display - Automatic tool ejector - Forward/reverse operation device - Height-adjustable safety guard

Stanje: novo, Turning length 1500 mm Swing diameter 460 mm Swing diameter over cross slide 270 mm Swing diameter in gap 690 mm Spindle bore 80.0 mm Spindle speed 25 - 1700 rpm Bed width 300 mm Spindle mount DIN 55029 D 1-8 Tailstock taper 4 MT Quill travel 130 mm Total power requirement 5.5 kW Machine weight approx. 1845 kg Dimensions L-W-H 2750 x 1080 x 1600 mm Description: The universal lathe Solid 460 Pro has been specifically designed for the economical production of single parts and small batches with high precision. The standard equipment already includes all essential accessories, making this machine exceptionally versatile. Scope of delivery: - 3-axis digital display ES-12 V with LCD screen Ffedsxab Nqjpfx Abvjw - 3-jaw chuck PS3-250 mm / D8 - Face plate 450 mm - Coolant system - Initial fill with Shell Tellus 46 - Fixed steady rest – max. passage diameter 150 mm - Travelling steady rest – max. passage diameter 110 mm - Quick-change tool post with 4 holders - Safety device for quick-change tool post - Motor with electromagnetic brake according to CE standard - Foot pedal with brake function according to CE - Slip clutch - Rapid traverse longitudinal and cross - Change gears - 2 centres - Reducing sleeve - Thread dial indicator - LED machine lamp - Chip guard at the rear - Operating tools

Stanje: dober (rabljeno), Saw roller stand, saw roller support, saw trestle, roller conveyor stand, roller stand - Manufacturer: Bernardo, roller stand for hacksaw, bandsaw, and cold circular saw - Roller height: 570 to 970 mm - Roller: Ø 52 x 355 mm - Dimensions: 500/420/H570 mm - Weight: 14 kg Fsdpfsvm Sv Sex Abvsfw