Stroj za rezanje niti

BERNARDO TM 24 BLO / R 1200

Leto izdelave: 2018, Stanje: pripravljen za uporabo (rabljen), - RABLJEN - 5-OSNI MOSTNI CNC REZKALNI STROJ POTOVANJE VZDOLŽ: 2500 mm PREČNO POTOVANJE: 3500 mm VERTIKALNO POTOVANJE: 1300 mm HITRI POMIKI V-N-P: 40 m/min DIMENZIJE MIZE: 3500 x 2500 mm GLAVA: AVTOMATSKA A/B OS ; A-os ±185° – B-os ±270° ; HSK A100 ; 12.000 obr/min MENJALNIK ORODIJ: VERIŽNI TIP ; 64 POZICIJ KRMILNA ENOTA: HEIDENHAIN TNC640 Nkedpfxewla Hnj Ag Tju TEŽA: 51.370 kg OPREMA: VISOKOTLAČNI HLADILNI SISTEM ; TRANSPORTER OSTRUŽKOV ; LASERSKI MERILNIK ORODIJ ; PAPIRNI FILTER ; MERILNA SONDÁ ; PRENOSNI ROČNI KRMILNIK

Stanje: rabljeno, Leto izdelave: 2007, x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm Control: Sinumerik 840 D Siemens Max. clearance between columns: 3,000 mm Max. passage height: 1,950 mm Max. distance spindle center to table: 1,800 mm Distance spindle nose to table: 1,350 / 1,500 mm Type P 8005020/00-4 Speed range - main spindle: max. 18,000 rpm Drive power - main spindle: 20 kW Max. torque: 48 Nm Tool holder: HSK-A63 DIN 69063 Spindle extension: 450 mm Tilting axis B: +110° / -10° Rotary axis C: +/- 200° Type P 8002320/00-4 Nsdpfxevy Ihdo Ag Tjku Speed range - main spindle: 20 - 5,000 rpm Drive power - main spindle: 40 kW Max. torque: 1,100 Nm Tool holder: HSK-A100 DIN 69063 Spindle extension: 300 mm Tilting axis B: +110° / -10° Rotary axis C: +/- 200° Table clamping area: 4,000 x 2,200 mm (2x) Max. table load: 12 / 20 t Height above floor: 700 mm Number of T-slots: 11 + 19 T-slot width: 28H7 mm T-slot spacing: 200 mm Number of tool pockets: 327 positions Number of tool pockets HSK A63: 156 positions Number of tool pockets HSK A100: 171 positions Max. tool diameter HSK A63: 52 mm Max. tool length HSK A63: 250 / 500 mm Max. tool weight HSK A63: 5.0 kg Max. tool diameter HSK A100: 315 mm Max. tool length HSK A100: 500 / 800 mm Max. tool weight HSK A100: 40.0 kg Feed rate X: max. 30,000 mm/min Feed rate Y/Z: max. 40,000 mm/min Feed rate B: 3,600 °/min Feed rate C: 2,160 °/min Acceleration X: max. 1.5 m/s² Acceleration Y/Z: max. 3.2 m/s² x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm b-axis +110° / -10° c-axis +/- 200° Total power requirement: 150 kVA Required space approx. 25.0 x 12.0 x 7.0 m 5-axis portal large machining center DROOP + REIN - TFS 22 40 DT D40 P - Two milling heads - Approx. 4,000 operating hours - X-axis 10,000 mm (coupled) / 2x 5,000 mm (single table) - 3 simultaneous axes (X, Y, Z) - 2 positioning axes (B, C) - Tools upon agreement

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Speed: 4500 rpm, max. drum diameter: 300 mm / 167 mm, solids: 2.6 kg/dm³, material temperature min./max.: 5°C / 100°C, bowl dimensions X/Y: 300 mm / 1200 mm, machine material: stainless steel, operating hours: 62,293 h. Spare parts included. On-site inspection possible. Nedpfx Ageu Av H Do Tsku

Stanje: novo, Isitan Hydraulic 4-Roller Plate Bending Machine Model: 4R HMS 1270 x 130 Top and bottom rollers driven Hydraulic side roller adjustment 3 digital position displays Hydraulic drop end Hardened rollers Cone bending device Separate control panel Usable length: 1270 mm Top roller diameter: 130 mm Side roller diameter: 130 mm Total motor power: 3.3 kW Working speed: 5 m/min Weight: 2150 kg Dimensions (mm): 3200 x 1150 x 1110 (L x W x H) Bending capacity: 5 mm Pre-bending capacity: 4 mm All bending capacities are calculated based on 250 N/mm² yield strength Nodpfoiffwqjx Ag Tsku Material: (ST 37 - ST 42 structural steel)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, vrsta goriva: električni, skupna masa: 2.500 kg, največja dovoljena obremenitev: 2.500 kg, tip droga: teleskopski, Self-propelled battery-powered crane by renowned Italian manufacturer JMG, model MC25S with radio remote control and a lifting capacity of 2,500 kg. Brand new machine, available for inspection. Distributor, 12-month warranty. CRANE CLASSIFICATION ACCORDING TO UNI ISO 4301-1: A3 EUROPEAN DIRECTIVES: 2006/42/EC (Machinery Directive) 2004/108/EC (EMC) 2006/95/EC (Low Voltage Directive) 2000/14/EC and subsequent amendments. REFERENCE STANDARDS: EN 13000:2010 UNI ISO 4301-2:2011 and subsequent amendments. DRIVE SYSTEM: Electric BOOM DRIVE: Hydraulic POWER SUPPLY: Electric battery MAXIMUM LIFTING CAPACITY: 2,500 kg CRANE WEIGHT: 2,500 kg BOOM ANGLE UP: 60° BOOM ANGLE DOWN: -15° FRAME: Designed and manufactured by JMG. Box-type, torsion-resistant structure made from high-strength structural steel. BOOM: Made from high-quality steel plate, formed and welded. Consists of a base unit, hydraulic telescopic system and one mechanical extension. Boom elevation and extension are hydraulically operated using telescopic cylinders. TRAVEL MOTOR: 2 electric motors, 2 kW, 24V AC, insulation class H. PUMP MOTOR: Electric motor 3 kW, 24V DC, insulation class H. DRIVE: Electronic speed control, MOSFET type. BATTERY: 24 V 420 Ah, with charge indicator. DRIVE TRANSMISSION: Front axle driven by two gearboxes. WHEELS: Front: superelastic, 18x7-8", 2 pcs. Rear: superelastic, 15x4 1/2 -8", 2 pcs. BRAKES: Automatic on front wheels. STEERING: Rear axle steering via electric motor. Max. steering angle ± 90°. CONTROL: Operated via radio remote control. HYDRAULIC SYSTEM: Powered by a low-noise 3 kW gear pump. Cylinders operated by an electro-proportional distributor controllable via radio remote. Equipped with a filter and safety valve. Max. working pressure 22 MPa. SAFETY FEATURES: Electronic load moment indicator and limiter. STANDARD EQUIPMENT: • Max. lifting capacity 2.5 t • Front wheel drive via two gearboxes (one per wheel) Nsdpfewtppzjx Ag Teku • Hydraulically telescoping boom (1 fixed section, 2 telescopic sections) • Manual mechanical boom extension • 24 V 420 Ah battery pack • Stationary battery charger • Work lights • Warning beacon • Fire extinguisher • Radio remote control for boom and travel • Electronic load indicator and limiter compliant with CE standards • Boom inclination +60° / -15° • CE conformity declaration • Operation manual, technical documentation, declarations INSTALLED OPTIONAL EQUIPMENT: • 2.5 t hydraulic winch • Non-marking tires • Battery water refilling system • On-board mobile charger • Manual three-position jib (1.0 t)

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, High-speed Steam Generator Set - Jumag comprising 3 high-speed steam generators including water softening system and chemical dosing unit 1x Jumag DG 360 Volume: 60 L Operating pressure: 13 bar Max. thermal output: 245 kW Steam output: 360 kg/h Gas burner: Weishaupt WG30N/1-C-ZM-LN Year of manufacture: 2011 Njdown H Aujpfx Ag Toku 2x Jumag DG 320 Volume: 49 L Operating pressure: 13 bar Max. thermal output: 200 kW Steam output: 320 kg/h Gas burner: Weishaupt WG30N/1-C Year of manufacture: 2002

Stanje: novo, Bernardo Horizontal Bandsaw HBS 275 - 400 V Technical Specifications Cutting capacity round 90°: 225 mm Cutting capacity square 90°: 200 x 200 mm Cutting capacity flat 90°: 245 x 150 mm Cutting capacity round 45°: 160 mm Cutting capacity square 45°: 160 x 160 mm Cutting capacity round 60°: 100 mm Cutting capacity square 60°: 100 x 100 mm Working height: 910 mm Saw blade dimensions: 2480 x 27 x 0.9 mm Cutting speeds 400 V: 45 / 90 m/min Coolant pump S1 100%: 100 W Motor output S1 100%: 1.1 kW Motor input S6 40%: 1.5 kW Voltage: 400 V Machine dimensions (L x W x H): 1430 x 720 x 1700 mm Weight approx.: 190 kg Scope of delivery • Saw blade • Workpiece stop • Base frame • Band tension pressure gauge • Quick-action vice Nkjdpjd Du T Iefx Ag Tou • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Stanje: novo, TECHNICAL DATA Type: gas-heated pass-through chamber furnace Internal dimensions (W x H x D): 2200 x 2350 x 3000 mm Number of control zones: 2 Max. loading weight: approx. 2.5 t Control system: Siemens S7 Nsdpsg Dgymsfx Ag Tjku

Stanje: novo, The Jantar is, due to its dynamics and efficiency, the most popular model among Eckert machines. It is used by both large industrial companies and medium-sized enterprises seeking an economical yet reliable solution. The Jantar plasma cutting system can be equipped with both plasma and oxy-fuel cutting systems and can be fitted with extensive accessories (marking, drilling, and processing of pipes and profiles). The machine’s design has been optimized over the years for maximum reliability, which hundreds of customers across Europe can confirm. Main Features • Attractive price for a well-equipped base version • Highly dynamic and precise cutting of 2D applications, pipes and profiles • Cutting capacity from 0.5 mm up to 100 mm material thickness Njdpfx Agjf Alb Ao Tjku • Comprehensive database of predefined cutting parameters • Optionally expandable work area length Technical Data Drive: Servo AC Available working widths: 1,500, 2,000, 2,500, 3,000 mm Available working length: Any length starting from 1,500 mm Positioning speed: 25,000 mm/min Cutting thickness: up to 100 mm Cutting quality: DIN-EN ISO 9013 Positioning accuracy: DIN-EN 28206 Repeatability: DIN-EN 28206 Electrical systems: DIN-EN 81346 Safety module: DIN-EN 13850 Working height: 740-760 mm Operating temperature: +5°C to 45°C Working humidity: max. 90%

Stanje: rabljeno, Leto izdelave: 2014, skupna višina: 1.950 mm, skupna dolžina: 2.400 mm, skupna širina: 1.600 mm, Poids à vide : 2 000 kg Prix : sur demande - Année de fabrication : 2014 - Documentation disponible : Oui - Marquage CE présent : Oui - Certificat CE disponible : Non - Numéro de série : 3098034 - Commande : CNC - Hauteur de pointes [mm] : 450 - Diamètre de tournage sur banc [mm] : 900 - Distance entre pointes [mm] : 900 - Largeur du banc [mm] : 445 - Passage de broche [mm] : 60 - Vitesse de broche max. [tr/min] : 1800 - Course axe X [mm] : 203 Njdpfxsxq Aqws Ag Teku - Course axe Z [mm] : 762 - Dimensions de transport : 2400mm x 1600mm x 1950mm (L x l x H) - Poids transport [kg] : 2000kg - Colis de transport [pcs.] : 2 Informations financières TVA : le prix indiqué s’entend hors TVA TVA/régime de la marge : TVA déductible pour les professionnels Livraison et reprise possibles à tout moment pour tous produits du secteur industriel Lukas van Rossum