Vrtanje in rezkalni stroj

Bernardo KF 60

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: 2103 XXXXXX, The FPS 300M, successor to the DECKEL FP1. Based on our many years of service experience, we decided to develop and manufacture our own milling machines. The FPS 300M is a conventional milling machine, perfectly suited for both training and production. Control 3 axes – FPS Aktiv – digital display Spindle speed 40 – 2000 rpm, geometrically stepped direct-drive gearbox with 16 gear stages for maximum torque and milling performance Feed 5 to 500 mm/min, continuously adjustable Rapid traverse 1.5 m/min Quill Extendable quill, vertical 60 mm SK40 with M16 drawbar thread, optional: with DECKEL saw thread S20 x 2 Axes X/Y/Z 300/160/340 mm Table Rigid angle table 600 x 210 mm Fsdpfxjh I Nqwj Apropk Equipment • Vertical and horizontal spindle • Milling head manually tiltable +/- 90° Options • Z-axis bellows • Chip tray • Machine lamp • Central lubrication • Universal table • Rotary table • Slotting head • Dividing attachment • Counter-support • etc. Further technical data can be found in the attached data sheet.

Stanje: novo, Swing diameter: 400 mm Turning length: 1,000 mm Speed range: 70 – 2,000 rpm Weight approx.: 500 kg Description: - Lead- and feed-screw lathe features a robust construction and user-friendly operation. TM 4010D equipped with digital position display DPA 21 - Machine bed and base made from heavily ribbed special cast iron - High rigidity of the headstock housing achieved through heavily ribbed GG cast iron - Hardened and ground face spindle ensures high accuracy and durability - High material removal rates during rough machining enable production of fine surfaces and tight tolerances - Wide range of threads and feeds without requiring a gear change in the change gear compartment - Bed guideways hardened and precision-ground - Perfectly running main spindle mounted in precision ball bearings - Mechanical longitudinal feed stop for the carriage with four adjustable eccentrics - Electronic brake for the main spindle - All controls (electrical) are centrally accessible - 4-position longitudinal stop - Quick-change tool post SWH 3 TM 4010D – Digital position display DPA 21 - User-friendly membrane keypad, splash-proof, sealed, and anti-glare - Increased working accuracy - Reduced error rate - X, Y, Z0, and Z-axes each with 8-digit display - Glass scales Equipment details: Feed gearbox – All gears made of steel, hardened and ground - Shafts run on needle bearings - All components lubricated in an oil bath Apron – Housing fully sealed - Safety feature to prevent simultaneous operation of threading and feed mechanism Tailstock – Hardened and ground quill, generously dimensioned, quill with scale Prismatic bed – Heavily ribbed cast iron, high rigidity Machine lamp – Full illumination of the work area Main spindle – Perfectly concentric running, high load capacity, mounted in precision taper roller bearings Machine base – Assembled Tool compartment Operator panel – User-friendly membrane keypad - Machine lamp - Coolant pump - Direct drive - Two-speed motor control - Emergency stop button Coolant tank – Removable, level indicator, easy and complete draining/cleaning Control cabinet – Clearly arranged, 24V DC power supply, all contactors and relays from Schneider or Siemens Chip tray – Hinged, easy chip cleaning Scope of delivery: - 3-jaw chuck 200 mm - Operating tools - Adapter MK 6 to MK 4 - Change gear set Technical data: Length: 1,950 mm Width/Depth: 820 mm Height: 1,530 mm Max. length: Max. width/depth: Max. height: Weight: 500 kg Drive motor power: 2.2 kW Total connected load: 2.3 kW Total current consumption: Electrical voltage: 400 V Phase(s): 3-phase Current type: AC Network frequency: 50 Hz Spindle mounting: Camlock DIN ISO 702-2 No. 5 Spindle bore/bar capacity diameter: Ø 53 mm Chuck diameter: Chuck actuation: Centre height: 200 mm Distance between centres: 1,000 mm Swing over bed: 400 mm Fodpfx Aed Eaukoprspk

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 585 mm, pomik osi Y: 185 mm, pomik po osi Z: 320 mm, skupna višina: 2.245 mm, skupna širina: 1.340 mm, skupna dolžina: 1.140 mm, širina mize: 240 mm, dolžina mize: 1.000 mm, vrsta vhodnega toka: trifazni, največja hitrost vrtenja: 2.000 obr/min, vrtljajska hitrost (min.): 100 obr/min, skupna masa: 1.000 kg, delovno območje: 650 mm, vhodna napetost: 400 V, razdalja od mize do središča vretena: 370 mm, vhodna frekvenca: 50 Hz, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Vrtalna zmogljivost jekla ----- 50 mm Fpsdpfjga Twfjx Aprjk Rezkalna zmogljivost jekla ----- 25 mm Obodna rezkalna zmogljivost ----- 100 mm Premik v vzdolžni smeri (X) ----- 585 mm Premik v prečni smeri (Y) ----- 185 mm Premik v višini (Z) ----- 320 mm Horizontalni motor ----- 1,5 kW Vertikalni motor ----- 2,2 kW Horizontalno rezkalno vreteno ----- 60 ~ 1350 obr/min (9) Vertikalno rezkalno vreteno ----- brezstopenjsko 100-600 / 350-2000 obr/min Vpenjanje vretena ----- ISO 40 Miza ----- 1000 x 240 mm Teža ----- 1000 kg VKLUČUJE * DELTA frekvenčni pretvornik * 3-osni digitalni prikaz SINO * Avtomatski vzdolžni in prečni pomik delovne mize * LED osvetlitev * Hladilni sistem * Luksuzna upravljalna omarica * Nagibna rezkalna glava levo/desno 0 - 45 stopinj * Zasučna delovna miza * Razni držala v kovčku

Stanje: rabljeno, Leto izdelave: 2006, številka stroja/vozila: 185078, Offer 24435 Technical Data: - Table surface: 1700 x 550 mm - Manual travel paths X / Y: 1300 x 500 mm - Drilling machine, make: MAXION, type: BT 15 GL - Drilling capacity up to: 18 mm - Tapping capacity up to: M 10 - Drill spindle mount: MK 2 - Drilling spindle stroke with fine depth adjustment: 90 mm - Pneumatic feed unit: PV 12 - Throat depth: 670 mm Fpedpfout Uzaox Aprek - 4 spindle speeds: 320 / 560 / 1000 / 1600 rpm - Motorized stroke of drilling unit - Table clamping x + y - Minimum quantity lubrication - Pneumatic connection: 6 bar - Electrical connection: 400 V - Space requirement (approx.): W 1750 x H 1600 x D 1000 mm - Weight (approx.): 1200 kg - Various guiding sleeves

Stanje: dober (rabljeno), 1 x univerzalni stružni stroj Macmon M 100 v odličnem stanju, iz strokovne šole. Tehnični podatki in dodatne fotografije bodo objavljeni kmalu. Fjdpfxst Sdaio Apropk Stroj si lahko ogledate v delovanju.

Stanje: novo, TC 205 x 1000 Centre height: 205 mm Swing diameter over bed: 410 mm Distance between centres: 1000 mm Bed width: 260 mm Spindle nose: DIN 55029 (Camlock) 9, size 6 Cross slide travel: 220 mm Top slide travel: 125 mm Spindle bore: 52.5 mm Fodpfx Apoir If Derepk Spindle speeds: 20 - 3000 rpm Speed control: Infinitely variable Mechanical speed ranges: 2 Motor power: 3.75 kW Coolant pump: 0.13 kW Longitudinal feeds Z: 0.05 - 1.7 mm/rev Cross feeds X: 0.025 - 0.85 mm/rev Whitworth threads: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14.0 mm Diametral pitch threads: (21) 8 - 44 DP Module threads: (18) 0.3 - 3.5 MP Tailstock quill diameter: 52 mm Tailstock taper: MT 4 Tailstock quill stroke: 150 mm Dimensions: 2270 x 1120 x 1900 mm Weight, approx.: 1500 kg Features: - Machine tool accuracy according to DIN 8605 - Infinitely variable speed control (2 mechanical speed ranges) - Precision-balanced main spindle - Rigid machine bed with hardened and ground guideways - Monolithic cast-iron base - Adjustable precision taper roller bearings in the main spindle - Easy-to-operate feed gearbox with a wide feed range running in an enclosed oil bath - Low-maintenance central lubrication - Removable gap bridge Scope of delivery: - 3-axis digital readout (resolution 0.005 mm) - 3-jaw chuck - Quick-change tool post with four tool holders - High splash guard with integrated LED trough light - Pull-out chip tray at the front - Overload clutch - Fixed steady rest with ball bearing inserts - Travelling steady rest - Micrometer bed stop - Machine pads (1 set of 6 pieces) - Two emergency stop buttons - Foot pedal with dual brake system (mechanical and electrical) - Chuck guard, tool post guard and leadscrew cover with limit switch protection in accordance with European CE safety standards - Coolant system - 2 fixed centres - Reducing sleeve for main spindle - Operating tools - Operating tools in toolbox - Operating manual with spare parts list

Stanje: novo, x-axis travel 300 mm y-axis travel 200 mm z-axis travel 350 mm Table size 700 x 200 mm Spindle taper ISO 40 Speed range - horizontal 150 - 1660 rpm Speed range - vertical 110 - 1230 rpm Quill stroke 120 mm Spindle motor 3.0 kW Fedpfofrzunox Apropk Machine weight approx. 1.15 t Space required approx. 1.31 x 1.38 x 1.65 m Ideally suited for training purposes, featuring: • Automatic feed on all axes • Steady rest for horizontal milling • Clearly arranged control panel • Handwheel-operated quill • Hardened and ground guideways • Steady rest for horizontal milling included as standard • 3-axis digital readout Scope of delivery (included in price): Chip tray, mounting arm for vertical head, coolant device.

Stanje: dober (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 55453, ACIERA 23 CNC DRILLING MACHINE With Aciera ISO30 quick-change system Machine inspected and 100% operational Excellent price-performance ratio WITH CNC HEIDENHAIN TNC 125 Technical Specifications Drilling capacity in steel: 23 mm Fpedpfx Apou Tn Raerek Thread cutting in steel: M18 Spindle speeds: stepless from 45 rpm to 4000 rpm Spindle stroke: 120 mm Table length: 590 mm Table width: 320 mm Distance between table and spindle min.: 110 mm Distance between table and spindle max.: 570 mm Longitudinal travel: 500 mm Cross travel: 300 mm Feeds: 0.02-0.6 mm/min Electrical connection: 50 Hz, 3x 380 volts Power: 4.0 kW Machine weight approx.: 2110 kg Machine dimensions: length 1700 mm, width 1400 mm, height 2100 mm Technical specifications are not binding.

Stanje: novo, WM5150 ROGI Bed-Type Milling Machine 400V-3Ph Motor ----- 2.4 kW Vertical Speed Range ----- 94 ~ 2256 rpm Spindle Taper ----- ISO 40 Table ----- 1220 x 360 mm Quill Stroke ----- 180 mm Quill Feed ----- 0.1 / 0.15 / 0.3 mm/rev Longitudinal Travel (X) ----- 600 mm Cross Travel (Y) ----- 360 mm Vertical Travel (Z) ----- 500 mm Overhang ----- 370 mm Spindle Head Swivel Range ----- -45 to +45 degrees Distance Spindle/Table ----- 110 - 610 mm Feed Range Longitudinal/Cross ----- (8) 24 - 720 mm/min Weight ----- 1800 KG Fedpfx Apsga T Dwsrspk INCLUDES: * 3-axis digital readout by SINO * Automatic table feed X, Y * Automatic spindle feed * LED lighting * Coolant system * Deluxe control cabinet * Toolbox with various tools

Leto izdelave: 2009, stanje: dober (rabljeno), Hidravlični cilinder, podporni cilinder, hidravlični bat, tlačni bat - Tlačna sila: pri 250 bar 96 t - Premer bata: 220 mm - Batnica: Ø 125 mm Fpodpfxedq U S Ie Aprsk - Zunanji premer cevi cilindra: Ø 260 mm - Hod: 495 mm - Skupna dolžina v zaprtem položaju (sredina do sredine luknje): 1195 mm - Priključek batnice: Ø 100 mm - Priključek cilindra: Ø 100 mm - Univerzalna uporaba - Količina: 15 cilindrov na zalogi - Cena: na kos - Dimenzije: 1360/530/H300 mm - Teža: 364 kg/kos