Stroj za vrtanje in rezkanje

Optimum MB 4 PV

Stanje: novo, Leto izdelave: 2021, Optimill MB 4PV Drilling and Milling Machine including Accessories (New, Unused Condition): Including Accessories: - Set of 20 Packing Plates - RTE 165 Dividing Table Cgedpfeyxyivox Ahxot - SPW 12 Clamping Tool Kit (58 pieces) - 4x SE55 Leveling Feet with Vibration Dampers - Collet Chuck Set MK4/M16 ER32 3-20 mm Heavy, solid cast-iron construction High smoothness of operation due to ground, oil-bath lubricated gearbox gears Clockwise/anticlockwise rotation Automatic quill feed with manual fine feed Motorized positioning of the Z-axis Motorized table feed for the X-axis Coolant system Machine lamp Gear head swivels ±45° Substantial dovetail guide on the column, hand-scraped, for maximum stability and highest precision Height-adjustable, large protective shield with microswitch Drilling depth stop Digital position display DRO 5 Drilling/thread cutting function Substantial and large cross table, precisely surface-machined with T-slots and adjustable gib strips Heavy cast-iron machine stand with chip tray Single-stage quality industrial electric motor Wide speed range from 60 - 2,760 rpm via 2 infinitely variable speeds SINAMICS V20 inverter by SIEMENS Dimensions and Weights: Length approx. 1600 mm Width/Depth approx. 930 mm Height approx. 2110 mm Weight approx. 495 kg Drilling-Milling Head: Drilling-milling head tilt range ± 45 ° Drilling-Milling Capacity: Max. face mill size: 63 mm Max. shank cutter size: 26 mm Drilling capacity (steel, S235JR): 24 mm Continuous drilling capacity (steel, S235JR): 20 mm Electrical Data: Drive motor output: 1.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Horizontal milling table: Length: 800 mm Width: 240 mm Vertical spindle - milling table max. distance: 420 mm T-slot size: 14 mm Number of T-slots: 3 T-slot spacing: 80 mm Coolant system: Coolant pump drive power: 100 W Standards and Approvals: Standard: DIN EN 55011 EMC class: C2 Travel: X-axis, manual: 560 mm Y-axis, manual: 195 mm Z-axis, manual: 350 mm X-axis, automatic: 480 mm Vertical spindle: Throat: 258 mm Spindle taper: MK 4 Speed range: 60 – 2,760 rpm Number of speed ranges: 2 Speed control: electronic Drawbar: M 16 Quill diameter: 75 mm Quill stroke: 120 mm

Stanje: novo, Centre distance ----- 1000 mm Centre height ----- 230 mm Swing over bed ----- 460 mm Spindle bore ----- 58 mm Bed width ----- 300 mm Spindle speed ----- 25–2000 rpm Motor ----- 5.5 kW Weight ----- 1750 kg INCLUDES Cgodpfjk Iug Tjx Ahxst * 3-axis digital display brand SINO * Quick-change toolpost type Multifix TOOB2 with 4 holders * Self-centering 3-jaw chuck 250 mm * Independent 4-jaw chuck 320 mm * Faceplate 350 mm * Fixed and travelling steady rests * LED work lamp and coolant system * Electric brake (CE) * Foot brake * Box with various tools

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 540 mm, pomik osi Y: 240 mm, največja hitrost vretena: 1.650 obr/min, hitrost vretena (min.): 45 obr/min, nosilec vretena: MK 4, globina grla: 350 mm, poteza s peresom: 130 mm, skupna dolžina: 1.250 mm, skupna višina: 1.900 mm, širina mize: 225 mm, skupna širina: 1.100 mm, dolžina mize: 800 mm, zmogljivost vrtanja: 40 mm, nos vretena: MK-4, nazivna moč: 2,2 kW (2,99 KM), Drilling/milling machine, drilling capacity Ø 40 mm, 2-speed motor 1.9/2.2 kW, table size 800x225 mm, spindle speed 45-1650 rpm, stepless variator, MK-4, machine lamp, motorized table lift, automatic feed, fine adjustment, depth stop, coolant system, dimensions 1250x1100x1900 mm, weight approx. 600 kg. Csdpswt Swzjfx Ahxjgt

Stanje: novo, Leto izdelave: 2026, The ZX7045 B1 DRO milling and drilling machine is an advanced tool designed for precise metalworking. It is perfect for drilling, reaming, and enlarging holes up to 45/40 mm in cast iron, as well as threading up to M12 mm. Thanks to its milling capacity of up to 80 mm in width and keyway milling up to 22 mm, this machine offers versatile applications. The ZX7045 B1 DRO version features automatic spindle feed, increasing work efficiency. Additionally, it is equipped with digital readout for enhanced operational accuracy and a cooling system to maintain optimal temperature during processing. The machine is ready for immediate use and available from stock. Ideal for professionals seeking high quality and performance in metalworking. Product features: - HEAVY, STABLE CAST IRON BASE - AUTOMATIC SPINDLE FEED - MILLING HEAD HEIGHT ADJUSTED ON THE SUPPORT, NOT ON THE COLUMN - ADDITIONAL LIQUID COOLING - MASSIVE CROSS TABLE WITH PRECISELY GROUND SURFACE - DOVETAIL GUIDEWAYS - QUIET OPERATION THANKS TO GROUND GEARS - LEFT AND RIGHT SPINDLE ROTATION - SWIVEL HEAD +/- 90° - ADJUSTABLE HEAD HEIGHT - DIGITAL READOUT - Optional base available TECHNICAL DATA: Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 45 mm Face milling cutter diameter: 80 mm End mill diameter: 28 mm Spindle speeds: 50, 95, 100, 180, 190, 355, 360, 655, 710, 1260, 1310, 2520 rpm (6/12) Spindle taper: MT 4 Spindle feed: 125 mm (automatic feed) Table size: 820 mm x 240 mm Base dimensions: 580 mm x 600 mm Max. spindle-table distance: 445 mm Spindle-column distance: 260 mm Traverse X/Y/Z: 515/175/430 mm Quill feed rate: 0.12; 0.18; 0.25 mm/rev Head swivel left/right: 90° Motor power: 1.8 kW (2.5 HP) Cgedpfxsud H H Uj Ahxst Power supply: 400 V Weight: 350 kg Available equipment: - MK4/B18 drill chuck arbor - Digital readout - Hand tools - Drill chuck 3–16 mm/B18 - MK4/MK3 reducing sleeve - MK3/MK2 reducing sleeve - Operating instructions in English

Stanje: novo, Cutting capacity at 90 degrees, round: 240 mm Cutting capacity at 90 degrees, square: 240 mm Cutting capacity at 90 degrees, rectangular: 165 x 310 mm Saw band length: 2725 x 27 x 0.9 mm Table height: 890 mm Band speed: 35 / 70 m/min Total power requirement: 1.1 kW Csdpfxshpktve Ahxjgt Machine weight approx. 0.35 t Dimensions (LxWxH): 1.7 x 0.75 x 1.8 m The Z252/DG is equipped with the following features: - Hydraulic cylinder - Emulsion pump - Eccentric clamp - Base frame - Saw band - 400V plug -16A- The machine is delivered fully assembled and ready for immediate operation.

Stanje: novo, Leto izdelave: 2022, hitrost pomika os X: 20 m/min, hitrost podajanja osi Y: 20 m/min, hitrost podajanja os Z: 15 m/min, skupna masa: 7.400 kg, hitrost vretena (min.): 4.000 obr/min, največja hitrost vretena: 10 obr/min, pomik osi Y: 1.500 mm, moč: 22 kW (29,91 KM), DYAS ploščinsko vrtalno središče - DYAS PDC-1500 Število vrtalnih enot: 1 vertikalna Moč motorja: 22 kW Vreteni navor: 280 Nm Hitrost vretena: 10–4000 vrt/min Avtomatska menjava orodja (ATC): 16 pozicij Največja teža obdelovanca: 760 kg Največja vrtalna zmogljivost (mm): Ø40 mm Cgjdpfegbfaxjx Ahxot

Stanje: rabljeno, Length: 1800 mm Width: 1200 mm Machine weight approx.: 1.6 t Codpfx Aecxxu Djhxsgt Space requirement approx.: 1.8 x 1.2 x 0.4 m - Measuring plate with 5 special feet - Good condition

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Heidenhain digital display Fehlmann cross table KS 322 D Working area: Quill stroke Z-axis: 110 mm Travel of machine head: 450 mm Table to spindle nose: 0–527 mm Quick-change system: SF 32 Spindle motor: 2.9 kW Cgsdpewkrp Eofx Ahxjt Infinitely variable speed range: 50–6300 rpm Clamping surface: 320 x 670 mm Dimensions and weight: Space requirement (W x D x H): 1.5 m x 1.35 m x 2.1 m Weight: approx. 850 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 051888, Used Automatic Circular Saw Brand: Pedrazzoli Model: SB 350/45 AP Serial number: 051888 Year: 2004 Head block rotation mechanism for angled cuts up to 45° to the left with locking lever. Removable pneumatic anti-burr vise. Pneumatic cylinder for the head movement, with brake for speed adjustment. Transmission with double expanding pulley for variable speed from 15 to 90 m/s. Pivoting head on adjustable self-lubricating bushings. 600 mm feeder stroke operated by pneumatic cylinder. Repeatable up to a maximum of 9 strokes, for a total feed length of up to 5400 mm. Maximum feeder clamp opening: 160 mm. Programmable piece counter. Minimum trim cut waste: 160 mm. Feeder speed adjustment valve. Cgedpfx Ahsrfw Iksxst Ammeter. Reverse function. Emergency stop button and control panel lock switch. Blade lubrication-cooling system with electric pump. Coolant tank with removable pump for tank cleaning. Full safety guard designed for quick blade change. Blade diameter: Ø 350 mm. Cutting capacity: Round tubes 0°: 102 mm 45° right: 102 mm Square tubes 0°: 85 mm 45° right: 90 mm Rectangular tubes 0°: 158 x 85 mm 45° right: 120 x 85 mm Specifications: Three-phase 380V Dimensions: 1300 x 1350 x 1600 mm Worktable height: 950 mm Weight: 420 kg

Stanje: novo, Modern, precise column drilling machine for production, based on the proven UNIMAX 3 concept, featuring stepless feed drive, automatic tool ejector, and standard chip breaking control. The digital display shows feed rate, spindle speed, and drilling depth. Equipped with a forward/reverse switch and emergency stop button. Full motor protection included. Pre-configured machine with special equipment: thread cutting attachment, retraction function, and LED lamp. Standard drilling capacity in E 335: 30 mm Cedpfof Ey Auex Ahxegt Thread cutting capacity: M 20 Spindle: MT 3 Feed rate steplessly adjustable: 30 - 400 mm/min Programmable drilling depth: 125 mm Throat: 260 mm Spindle-to-table distance: 90 to 840 mm Table size: 500 x 365 mm Column diameter: 110 mm Overall height: 1,900 mm Weight: 280 kg Two-speed motor: 0.8/1.5 kW Infinitely variable spindle speeds Drilling Range A: 80 - 1,440 rpm Drilling Range B: 180 - 3,200 rpm Pre-configured machine including special equipment: - Thread cutting attachment - Retraction function - LED lamp