Kabina za prah TQN1414

Bumex Sp. z o.o. TQN1414

Stanje: novo, Leto izdelave: 2025, Robland products are manufactured by Landuyt N.V., headquartered in Bruges, Belgium. BM-3000: • Grooving saw unit (maximum groove depth 10 mm) • Left drill bit 5 mm for creating row drill holes • 20 mm drill bit for the installation of Minifix systems • 8 mm milling cutter for limited drilling and milling applications • 35 mm drill bit for hinges • The panel thickness that can be processed is 12–40 mm • The machine is equipped with a 4-position drill chuck and a saw blade • Y-axis range: Drilling: 900 mm / Sawing: 850 mm Technical Data: • Y-axis range: - Drilling: 920 mm - Sawing: 860 mm • X-axis support: 3000 mm • Z-axis (panel thickness): 12 mm to 40 mm • A-axis rotation: 360° • Feed speed: 20 m/min Djdpfx Afsd Hz Nielekg • Minimum panel dimensions (X) 300 x (Y) 120 x (Z) 12 mm • The machine is equipped with a 4-position drill chuck and a saw blade • Maximum and minimum drill hole diameters: 3 mm – 35 mm • The saw moves along the X-axis • Maximum groove depth with saw blade: 10 mm • Motor: 0.75 HP, 3x 400V/ 3x 230V • Minimum required extraction capacity: 2300 m³/h

Leto izdelave: 2019, Stanje: novo, Model: KPZ-4P Type: Enclosed Working dimensions: 3500 W x 1800 H x 1000 D mm External dimensions: 3300 W x 2300 H x 1800 D mm Operation: Electric Power: 2.75 kW Voltage: 380 V Frequency: 50-60 Hz Filters: 6 pcs Filter type: Polyester Filter cleaning: Jet Venturi Filter area: 22.5 m² Fan: Aluminium Fan noise level: 74 dBA Dsdpfxebxmfno Aflekg Air consumption: 20,400 m³/h Warranty: 12 months

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Samodejno nalaganje in razlaganje Napredne zmogljivosti obdelave Idealno za serijsko proizvodnjo Izboljšajte svojo proizvodnjo oblog vratnih podbojev z napravo Centauro Alfa Jamb – najsodobnejšim strojem, zasnovanim za samodejno nalaganje, obdelavo in razlaganje vratnih oblog in podbojev. Centauro Alfa Jamb združuje natančnost, učinkovitost in uporabniku prijazno tehnologijo ter predstavlja najboljšo rešitev za izdelavo vratnih podbojev. Zmogljiva glava CNC rezkalnika omogoča izvedbo tako vertikalnih kot horizontalnih obdelovalnih operacij. Ta vsestranska rezkalna glava je idealna za izdelavo utorov za tečaje ali ključavnice ter zagotavlja, da je vsak rez narejen natančno in dosledno. Poleg tega je priloženo tudi specializirano majhno rezkalo, namenjeno točkovnemu vrtanju lukenj za vijake tečajev in poravnavanju kotov utorov za tečaje, kar dodatno izboljša natančnost in kakovost končnega izdelka. Alfa Jamb avtomatizira celoten proces od nalaganja do razlaganja, tako da se lahko operaterji posvetijo zahtevnejšim nalogam, medtem ko stroj opravlja ponavljajoče se postopke. Programiranje je poenostavljeno s sodobnim barvnim kapacitivnim zaslonom na dotik TOP12-S, ki omogoča intuitivno uporabo. Prednameščene elektronske makro nastavitve omogočajo hitro pripravo in spreminjanje obdelovalnih operacij. Tehnične specifikacije: X os hod: 2800 mm Y os hod: 180 mm Z os hod: 150 mm Primeren za podboje dimenzij 2400 x 200 x 75 mm Glava za rezkanje/vrtanje: 3,3 kW, ER25, 0–18.000 rpm Glava za vrtanje pilotnih lukenj: 2,2 kW, ER25, 0–18.000 rpm 3 pnevmatske vertikalne prijemalne klešče, samodejno aktivirane skozi program 3 pnevmatske horizontalne prijemalne klešče, samodejno aktivirane skozi program Industrijski zaslon na dotik TOP12-S, 12'', z enostavnim makro programiranjem CE varnostna ograja ob straneh in zadaj ter svetlobna pregrada spredaj Priključek za odsesavanje prahu: 120 mm Pnevmatska povezava: 6 bar Skupne mere: 9644 x 1844 mm Skupna teža: 2000 kg Djdpfx Afeul Uaaslokg Skupna priključna moč: 5,6 kW Letnik: 2023, v skladu s CE Stanje: kot novo, uporabljeno le za demonstracije v razstavnem salonu

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2010, nosilnost: 200 kg, doseg roke: 2.400 mm, PLC Merkezi olarak, stoklarımızdaki endüstriyel robotlarımızla özel mühendislik projeleri gerçekleştirebilmekteyiz. Bu örnekte olduğu gibi, sizin ihtiyaçlarınıza yönelik projelerde size yardımcı olabiliriz: - Kaynak - Kesme - Makine Besleme - Paletleme - Depaletleme - Mermer İşleme - Abkant Makinesi Besleme ve Sac Bükme - Ve birçok farklı proje Djdpfxjq Dpxde Aflskg Marka: KUKA Model: KR200-3 Comp Durum: Revizyonlu, 1 yıl garantili Sürüm: V5.6.12 Yıl: 2010 Kontrol Kabini: KRC2 ed 05 Taşıma Kapasitesi: 200 kg Erişim Mesafesi: 2400 mm Dahil Olanlar: Manipülatör + Kontrol Kabini + Tüm Kablolama Setleri + Teach Pendant + 1 adet Hertz Spindle Motor (Yeni) + Delta Spindle (Mekanik Sistemle Setli) + Takım Değiştirme Masası Dahil Olmayanlar: 7. Eksen, Mühendislik Tasarımı ve Danışmanlık Sevkiyat: Fiyata DAHİL DEĞİLDİR Ödeme: Teslimattan önce %100 ödeme

Stanje: zelo dobro (rabljeno), Line for door frames (casings), for cutting, milling of strike plates and insertion of hinges (ANUBA) comprising: X10030A) Discharge conveyor X10030B) Transfer unit X10030C) Double cutting and drilling machine "AMS"      - Left side cut 45° - Drilling - 90° cut - Right side cut 45° - Drilling X10030D) Angle conveyor (90°) X10030E) Anuba hinge insertion machine "MASTERWOOD" Mod. MULTITEC Dkodpfx Aeqwyclsflsg X10030F) Strike plate milling machine "MASTERWOOD" Mod. Teknomat 3000

Stanje: rabljeno, številka stroja/vozila: 4/14242, Frank floor sanding machine FSR, used Motor power: 0.75 kW Voltage: 230 Volt 5 Amps, 50 Hz Machine no.: 4/14242 Dust bag Dsdpeb Auu Rjfx Aflekg Location: Ex stock Bitburg

Leto izdelave: 2004, Stanje: delavnici obnovljeno (rabljeno), No. 2054 1 used, partially overhauled and function-tested Alphatec Extruder, type AE-S 75.28 Djdpfx Afoiyx Uzjlskg Screw diameter: 75 mm, 28 L/D Drive: 75 kW AC Screw speed up to 80 rpm, adjustable 1x degassing zone with vacuum pump Installed heating capacity approx. 30 kW 3x temperature control zones for downstream equipment Control cabinet – NEW control system – type Inspection possible at our plant in Wuppertal. Further extruders available.

Leto izdelave: 2020, Stanje: novo, Touch to delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter connector), or manual. Filter connector sensor The cabins are fitted with a sensor that detects when the filters are clogged and need to be cleaned. The system also notifies when filters are already in use. Automatic filter cleaning Dkedpfofzktzox Aflsg The electronic automatic filter cleaning system controls the frequency and timing of cleaning. Each filter is cleaned individually; the filters can also be cleaned manually using presses. We know from experience that it's difficult to rely on the operator to clean the filters. Thanks to this system, the operator does not need to stop production. Low noise level Aluminum fans operate very quietly, with sound levels between 74-79 dB, which is sufficiently low. Even with the standard cabin design, it is hard to have a conversation nearby. Boiler through the cabin The cabin with overhanging squirrel-cage fans improves work efficiency, reducing the need for painters to move the fans manually. Pre-book construction The other cabins are designed to prevent the build-up of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Stanje: novo, Working width 3500 mm Working height 2300 mm Number of pressing cylinders: 4 pcs. S&S electrohydraulic frame press machine, Type Super Options: Working widths from 3,000 mm to 5,000 mm Dkodpsd Rzc Rofx Afljg Working heights from 2,000 mm to 3,000 mm Optional equipment with center pressure beam, slanted window device, counter profiles for single-part production, and much more! Request the complete price list from us! Description: With automatic adjustment for corner joints (tenon and mortise joint, other types of corner joints optional), CE compliant version The only self-adjusting high-performance fully automatic frame press where wooden workpieces do not need to be pre-placed. Width and height adjustment takes place automatically, without any loss of time, immediately after the workpieces are directly placed into the pressing area. No repositioning of the timber is necessary. Base machine with heavy-duty welded frame construction, made of oversized, thick-walled special profiles. Guiding rails of the press corners on the pressure beams in wear-resistant, machined design. Continuous stop side support for width pressing, torsion-resistant, mounted on the base frame. Continuous lower support in extremely heavy-duty, torsion-resistant design, connected with base frame and machine feed. Inserting height 500 mm. All stops are finely adjustable for absolute angular precision and long-term accuracy. Sliding carriage on right side with fast motorized width adjustment with guaranteed parallel movement, including automatic hydraulic locking: Central drive for size adjustment horizontally and vertically, with high infeed and adjustment speed and automatic width and height adjustment (opto-electronic). 2 vertical double-acting pressure cylinders, piston diameter 50 mm, 250 mm cylinder stroke, adjustable pressing force from 400 to 2000 kg. 2 horizontal double-acting pressure cylinders, piston diameter 40 mm, 80 mm cylinder stroke, adjustable pressing force from 250 to 1250 kg. Press corners at upper right, in heavy, milled design, with automatic corner adjustment. Removable press corners Contact surfaces with adhesive-repellent finish. Support and pressure plate depth 100 mm. 8-fold hold and positioning device for absolutely loose placement of all frame parts in the pressing area (no pre-assembly required). Each frame part is held and positioned in two places. Automatic lifting function enables ergonomic placement of the upper cross piece for tall frames at an operator-friendly height. Enhanced work safety due to floor-level operation without ladders or steps. All individual frame components are placed directly in the pressing area. Program selection options: - Manual motorized via push button - Fully automatic via opto-electronic size setting including automatic pressing cycle combined with safety light barrier Automatic, cycle-controlled pressing process via impulse: Vertical pressing – release – horizontal pressing – release – vertical/horizontal pressing Control cabinet is service-friendly, mounted on the left of the base frame. Fast opto-electronic size setting. Compact hydraulic unit adjustable from 20 to 100 bar. Electric hand control, freely programmable for efficient work, especially with large and complex frame structures.

Leto izdelave: 2025, Stanje: kot nova (razstavni stroj), air-cooled process chiller: Refrigerant R32 Dkjdjf H A Eyepfx Aflog Cooling capacity 72 kW at 7/12°C, internal P3 pump, integrated 410 l buffer tank, winter package for outdoor installation rated for ambient temperatures down to -25°C, includes variable-speed fans generous Dixell display with protective cover,