Vrtalni stroj

Bernardo GB 30 Vario

Stanje: novo, Drilling capacity in steel (diameter): 32.0 mm Tapping: M22 Drill stroke: 125 mm Throat depth: 280 mm Morse taper: 3 MT Table: 450 x 380 mm / 14 mm T-slot Spindle speed: 70 – 3,500 rpm Feed rate: 0.1 / 0.2 / 0.3 mm/rev Column diameter: 110 mm Weight: 320 kg Dimensions (L x W x H): 500 x 800 x 2,100 mm Total power requirement: 1.1 / 2.2 kW Features - Infinitely variable speed control, ideal for setting the desired cutting speed - Automatic tool ejector and tapping device supplied as standard - Electromechanical feed, adjustable from 0.1 – 0.3 mm/rev - Heavy-duty cast iron table with a rotary and tilting work surface - T-slots on the machine base allow clamping of tall workpieces - Guaranteed run-out accuracy = 0.02 mm, measured in the quill - Hardened and ground gears ensure smooth operation - Adjustable drilling depth stop with easy-to-read scale Scope of delivery: - Drill chuck arbor MT3 / B16 - Reduction sleeve MT3/2, MT3/1 - Key-type drill chuck 1 – 13 mm / B16 Hedpfxoxabiqe Af Tefb - Coolant system - Electromagnetic spindle feed - Tapping device - Automatic tool ejector - LED machine light - Digital speed display - First fill with Shell Tellus 46 - Height-adjustable safety cover

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1989, Dear Ladies and Gentlemen, We are offering for sale a partially overhauled Deckel FP1 featuring a 3-axis Heidenhain TNC113 active control system, renowned for its ease of operation. This newer model, manufactured in 1989, is equipped with central lubrication, an electric coolant pump, and a machine lamp. The machine has undergone thorough partial refurbishment in our workshop and is therefore in excellent condition. You are welcome to inspect it on site. Delivery time: on request Machine no.: 2102-xxxx Table: fixed angle table or rotary-tilt/swivel table Travel paths: X 300 mm / Y 160 mm / Z 340 mm Quill stroke: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2,000 rpm Tool holder: SK40 Feed: stepless, 5–500 mm/min Rapid traverse: 1,200 mm/min Equipment and accessories: 3-axis Heidenhain digital readout TNC113 with active control, stepless feed adjustment on all three axes, coolant system, central lubrication, technical documentation, leveling feet, safety devices (optional) Our service commitment to you: - We are a certified master workshop specialized in mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance - Upon request, we can completely or partially overhaul your selected machine - Upon request, you can order additional accessories such as tools, etc., directly - Upon request, we can install additional equipment such as safety devices, etc., directly Hfodpfx Afopy Eldo Teb - We are happy to handle shipping and/or installation for you

Stanje: kot nova (razstavni stroj), Column drilling machine Make: ALZMETALL Model: AX 3s iTRONIC Condition: New machine Speed range: 100 - 1,800 rpm Standard features include: - 7" TFT LCD display with touch function: Manual input of target spindle speed, Actual speed display, Integrated drilling depth indicator with touch zero-point setting, Virtual drilling depth scale in the display, Machine status indicators and warning messages in the display, service information, Selectable operating language: DE/EN/FR/ES/IT/NL/RU. - Tapping device - Infinitely variable speed adjustment via lever - Digital speed display Hfodpfx Afoiypz Es Teb - Three separate buttons for clockwise rotation, counterclockwise rotation, and stop - Clockwise/counterclockwise rotation via contactor control - Spindle guard - Operating manual Other key technical specifications: - 30 mm drilling capacity in ST 60 - 140 mm quill stroke - Spindle taper: MT 3 - Column diameter: 115 mm - Motor power: 1.0 / 1.6 kW - Table size: 515 x 360 mm With the following options: - LED machine lamp - Automatic spindle stop - Technology calculator in the display - Workpiece counter

Stanje: novo, High-performance thread cutting machine with leadscrew and optimal safety mechanism to prevent tool breakage. Programmable for single or continuous cycle operation. Electronically controlled motor brake in single cycle mode. Easy leadscrew change via quick coupling. Technical Data UNIMAX 3T GL: Thread cutting capacity: M4 - M20 Threads per hour: 800 Standard drilling capacity: 28 mm Spindle: MK 3 Thread depth: 90 mm Drilling depth: 120 mm Throat depth: 260 mm Spindle / table distance: 220 - 600 mm Table surface: 420 x 390 mm T-slot width: 14 mm Column diameter: 110 mm Overall height: 1,300 mm Weight: 250 kg Special motor: 0.9 kW Power supply: 400 V / 50 Hz 9 spindle speeds: 95 / 160 / 200 / 350 / 420 / 450 / 750 / 900 / 1,650 rpm Standard packaging: C - 160x75x125 cm Hfjdpfx Aogv I Unof Tob Additional accessories/options: Leadscrew, tap holder, retract-release mechanism, externally ventilated motor, die holder, flange quill, foot pulse switch, two-hand start, LED machine light, minimum quantity lubrication system, base cabinet

Stanje: novo, Continuous drilling capacity in St 60: 15 mm Standard drilling capacity: 18 mm Tapping capacity: M8 Spindle: MT 2 Drilling depth: 80 mm Throat depth: 180 mm Infinitely variable spindle speeds: 200 - 4,000 rpm Spindle speeds for threading: 200 - 700 rpm Distance spindle/table: up to 380 mm Table surface: 250 x 220 mm Column diameter: 65 mm Overall height: 910 mm Weight: 80 kg Three-phase motor, frequency-controlled: 1.1 kW Hfodjb Eldnepfx Af Teb With full-featured tapping device and programmable digital display Machine in stock and immediately available

Stanje: novo, Load capacity: 500 kg Hedpjxak H Ejfx Af Tjfb Outreach: 4000 mm Height: 3425 mm (underside of jib) Total column height: 4215 mm Slewing range: 270 degrees Total weight: approx. 550 kg Description: - Power supply to the trolley - Festoon cable system, cable sag approx. 800 mm - Floor operation via pendant control Including: - ABUS electric chain hoist - Chain hoist type GM 2 500.4-2, 2-fall - Painted in RAL 5017 traffic blue - Load capacity: 500 kg - Hook travel: 3000 mm - Maximum hook position: 2965 mm - Calculated according to FEM 9.901 - Mechanism group 2m / M5 - Lifting, 2-speed (pole-changing), 1 / 4 m/min - Lifting motor power: 0.09 / 0.35 kW - Duty cycle: 60% ED - Switching cycles: 360 c/h Overload protection The crane system meets the requirements of the Machinery Directive 2006/42/EC and the currently applicable accident prevention regulations DGUV Regulation 52 (formerly BGV D6). Including: - Anchor rod set L200 (type LS 200) - Consists of 8 pcs. M27 mm x 800 mm with 1 steel template (500/8) - For foundation fixing, including grouting accessories To align the slewing crane, an installation gap between the column base and the building floor must be provided. The installation gap is to be grouted by the customer after approx. 4 weeks of crane operation. Image shows a similar crane system.

Stanje: novo, Leto izdelave: 2025, The drill-milling machine can be used for drilling, reaming, and enlarging holes up to 45/40 mm in cast iron, threading bolts up to M12 mm, milling up to 80 mm in width, and keyway cutting up to 22 mm. It is also suitable for slotting and face milling. The machine is available immediately from stock. Machine features This machine can be used for drilling, reaming, and enlarging holes up to 45/40 mm in cast iron, threading bolts up to M12 mm, milling up to 80 mm in width, and keyway cutting up to 22 mm. It is also suitable for slotting and face milling. Various accessories can be mounted on it. HEAVY DUTY, STABLE CAST IRON CONSTRUCTION THE MILLING HEIGHT IS ADJUSTED VIA THE SUPPORT, NOT THE COLUMN ROBUST, HIGH-PRECISION CROSS TABLE FOR MILLING/DRILLING, PRECISELY GROUND SURFACE DOVETAIL GUIDES QUIET OPERATION DUE TO GROUND GEAR WHEELS LEFT AND RIGHT SPINDLE ROTATION ROTATING HEAD +/- 90 DEGREES ADJUSTABLE HEAD HEIGHT Machine base available as an option – 200€ Technical data MAX. DRILLING CAPACITY: 45 mm MAX. FACE MILLING: 80 mm MAX. CYLINDRICAL AND FACE MILLING: 28 mm MAX. THREADING: 12 mm Hodpfxeud H Huo Af Tofb SPINDLE TRAVEL: 120 mm SPINDLE TAPER: MT4 SPINDLE SPEEDS (6 MOTOR SPEEDS / 1400 rpm): 95, 170, 280, 540, 960, 1600 min-1 MAX. DISTANCE SPINDLE END TO TABLE: 475 mm DISTANCE SPINDLE TO COLUMN SURFACE: 260 mm WORKTABLE DIMENSIONS: 820 x 240 mm TABLE TRAVEL: 550 x 170 mm MOTOR: 1.1 kW / 1.5 HP VOLTAGE (two options available): 400V (three-phase motor) PACKAGING DIMENSIONS: 1140 x 800 x 1040 mm NET WEIGHT: 270 kg Available accessories MK4/B18 drill chuck arbor Service tools Drill chuck 3-16 mm/B18 Reducing sleeve MK4/MK3 Reducing sleeve MK3/MK2 User manual in Polish

Stanje: rabljeno, Leto izdelave: 2004, Technical details: X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Spindle speed range: 63 – 3,150 rpm Stepless feed rate: 12–3000 / 6–1500 (Z) mm/min Quill stroke: 100 mm Head swiveling range: +/- 90° Spindle taper: ISO SK 40 Clamping area: 630 x 400 mm Total power requirement: 8 kW Machine weight approx.: 2.2 t Space requirement approx.: 2 x 1.9 x 1.95 m Universal milling machine with linear control, Hfodpjk Hdu Djfx Af Tsb mechanical handwheels, rotary tilting table +/- 45°, hydraulic tool clamping, partial enclosure, coolant tank, manual

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3595, Dear Sir or Madam, For sale is a Weiler Commodor B lathe, year of manufacture 2001, equipped with a Heidenhain 3-axis digital readout. The machine has undergone a comprehensive partial overhaul in our workshop. Among other things, both the main spindle bearings and the leadscrew/feedshaft bearings have been completely renewed! Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to inspect on-site. Availability: on request Machine No.: 3595 Year of manufacture: 2001 Center height: 180 mm Center distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 - 0.888 mm/rev Hfsdpfx Afjthd Sho Tsb Thread types: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.35 - 12 mm Spindle brake: switchable Connected load: 4 kW Dimensions (LxHxW): approx. 2.2 x 1.5 x 1 m Weight: approx. 1.8 t Additional equipment and accessories: 3-axis digital readout, coolant system, chuck guard, pull-out chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various chuck jaws... Our service promise to you: - We are a certified master workshop specializing in mechanical engineering. - All machines are thoroughly inspected. - All lubricants and, if necessary, worn parts are replaced in advance. - Upon request, we can carry out a complete or partial overhaul of the machine of your choice. - Upon request, we can repaint the selected machine in your desired color. - Upon request, you can order additional accessories such as tools directly. - Upon request, we can also install further accessories such as safety equipment, etc. - We are happy to arrange shipping and/or installation for you.

Stanje: novo, Leto izdelave: 2024, pomik osi Y: 600 mm, pomik po osi Z: 450 mm, - Simple graphical programming, including GoTo function in manual mode - Machining lengths from 3,000 to 16,500 mm, depending on configuration - Free programming in DIN/ISO (G-codes) - 2-axis interpolation for X/Y axes, including arcs - 3-axis linear interpolation (X/Y/Z) - 3-axis interpolation (X/Y/Z) for helical milling and thread milling - Rapid traverse X-axis = 30 m/min, Y-axis = 25 m/min Main spindle BT 40 - 5-fold bearing support, diameter 110/60 mm (3x angular contact ball bearing 7212, 2x deep groove ball bearing 6212) Hedpjrb Afasfx Af Tefb - Suitable for both high axial and radial loads = drilling and milling - Maximum tool length: 290 mm - Maximum tool diameter: 88 mm X-axis guide - 2 units of 45 mm linear guides, each with 2 full-ball carriages X-axis drive - Helical precision rack, travel length 3,000 to 16,500 mm Y-axis guide - 2 units of 35 mm linear guides, each with 2 full-ball carriages Y-axis drive - Ball screw, 25 mm diameter, travel length 600 mm Z-axis guide - 2 units of 35 mm linear guides, each with 2 full-ball carriages Z-axis drive - Ball screw, 32 mm diameter, travel length 450 mm Standard configuration Automatic tool changer with 10 positions, mounted in the machine column