Haffner Kf 20 nakup rabljenega (25)

Stanje: rabljeno, Leto izdelave: 1980, Rabljeni stroj Stanje: različne manjše napake brez verig Oprema in tehnični podatki: Dvig levo/desno: 150 mm, Dvig gor/dol: 150 mm Motor: 1,5 kW Kfedpfsw I U Nhox Ah Aea Uporabno kot nosilec rezervnih delov Razpoložljivost: v kratkem času Lokacija: Flörsheim

Stanje: rabljeno, used, in good condition, low operating hours Manufacturer: Haffner Kfjdpfxevwgayj Ah Asa Model: KF 20 Stationary machine Chain assembly: 40 x 150 mm Workpiece support Lubrication unit 1 x mechanical workpiece clamping Space required approx. (LxWxH): 600 x 800 x 2000 mm Total connected load: 1.7 kW Location: 97447 Gerolzhofen Delivery in as-inspected condition - loaded free of charge -

Stanje: dober (rabljeno), Typ KF-30 In gutem Zustand Manuell Motor: 1,7 kW Kippbar Kettenbreite: 18 mm Hergestellt in Dänemark Transportmaße: 700x700x1800 mm Kodpfxsdrq Svj Ah Ajfa

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Verižni rezkar/verižni dletač KF20, z več verigami, v zelo dobrem stanju, 1,7 kW, 380 Voltov. Stroj podvržen diferencialni obdavčitvi. Kodexf Hzijpfx Ah Asfa

Stanje: rabljeno, used Make: Haffner Model: KF20 Wall-mounted machine Workpiece support Lubrication device Total connected load: 1.5 kW Location: 97447 Gerolzhofen Sale in as-is condition as inspected. No repair works included. Prompt collection required. - loaded free of charge - Ksdpfovwf T Eex Ah Asfa

Stanje: dober (rabljeno), Technical data: Motor: 1.5 kW Three-phase voltage: 220/380 V / 50 Hz Speed: 2800 rpm Max. mortising depth: 150 mm Max. slot length: approx. 170 mm Max. chain width: 40 mm Max. longitudinal table travel: 160 mm Max. cross table travel: 90 mm Tilt angle: 5 degrees Kfodpewm Dlkjfx Ah Aoa Weight, machine: 72 kg Weight, stand: 35 kg Approx. dimensions (H x W x L): 190 x 54 x 60 cm

Stanje: zelo dobro (rabljeno), Leto izdelave: 1994, Chain mortiser / chain router with pressure boring unit A complete lock case can be routed/drilled within 30 seconds No repositioning required for the entire process Quick switch between left and right doors Can also be used as a standard chain mortiser Kfjdpfx Aheul U Iwo Aea 3 motors Motor power: 1 x 2.2 kW & 2 x 0.5 kW, 400 V, 50 Hz Mortising length: 320 mm Mortising depth: 150 mm Mortising width: 6 - 40 mm Door thickness: 40 - 80 mm Door width: 400 - 1050 mm Weight: 192 kg Including clamping device Oil lubrication system 1 stop drum 2 side stops, 1500 mm each Including various spare drill bits Including spare chain Including all documentation

Stanje: rabljeno, Podtalna žaga Haffner US163, dobro ohranjena, 3 kW, dolžina reza 320 mm, višina reza 195 mm, 2800 vrt/min. Pridržujemo si pravico do sprememb cen, napak in tiskarskih napak. Kfedox H Ufnspfx Ah Asa

Stanje: dober (rabljeno), Router, router machine, handheld router - Delivery: in as-is condition as inspected - Accessories: collet (without locknut), depth stop Kfodpfx Ahsb A N Nmo Aoa - Speed: 12,000 rpm - Rated power input: 800 watts - Connection: 230 volts - Dimensions: 320 x 320 x H320 mm - Weight: 12 kg

Stanje: zelo dobro (rabljeno), Door lock milling machine SL100 With milling motors for faceplate and handle Kfsdpfx Aeu R Il Ujh Aja

Stanje: rabljeno, Agregat za izdelavo ključavničnega ohišja: da Agregat za luknjo za kljuko: da Kedpfxexu Dhfs Ah Ajfa Agregat za čelno rezkanje: da

Stanje: dober (rabljeno), Dvojna kotna žaga za razrez Kfodpfx Ahjx Hgu Is Asa Proizvajalec: Haffner Tip: DGS 180 Leto izdelave: N.A., cca. 1990 Dolžina reza: 3.400 mm Premer žaginega lista: 330 mm Moč: 2 x 1,1 kW Hitrost: 2.800 obr./min Nagib: 45°, 90° Zasuk: -45°, 90°, +45°

Stanje: dober (rabljeno), Koda: 0370 Znamka: HAFFNER - NEMČIJA Model: DGS 187 - CE standard Dvoglava kotna žaga z nagibnima reziloma za rezanje lesa, aluminija, PVC in različnih materialov – v skladu s CE standardom Kedpfsuiwqhex Ah Aofa Tehnični podatki: Premer rezil: 500 mm, izvrtina 30 mm Št. motorjev: 2 x 2,2 kW – 2.800 vrt/min Maksimalna dolžina reza: 3.400 mm Minimalna dolžina reza: 230 mm Nagib rezil: 45° - 90° Elektronsko nastavljanje dolžine reza na levi rezalni enoti Hidropnevmatsko pomikanje žage Pnevmatsko vpenjanje obdelovanca Kontrolna plošča z dvojnimi gumbi Elektronski programator za pozicioniranje glave Št. priključkov za odsesavanje: 2 x Ø 120 mm Delovni tlak: 6 bar (stisnjen zrak) Dimenzije (DxŠxV): 4.600 x 1.300 x 1.650 mm Teža: 550 kg

Stanje: rabljeno, Leto izdelave: 1995, Cutting width: 375 mm Kodpfxotv Rgre Ah Ajfa Cutting height: 150 mm Saw blade dimensions: 500 x 30 mm Motor power: 2 x 3 kW Cutting length: 5100 mm Rotational speed: 2800 rpm Air pressure: 6 bar Machine weight: approx. 700 kg Space requirement: approx. 6100 x 1450 x 1450 mm * Profile support plate made of steel * Robust cast construction of the saw unit * Large cutting area, allowing simultaneous cutting of 2 profiles * Easy adjustment of the movable unit via roller guide * Double bearing of the swivel mechanism * Safe clamping via dual-pressure system * Double guide for saw feed * Hydropneumatic saw feed * Correction scale for external dimensions * Left saw unit fixed * Swivel range 45°-90° * Including extraction unit (without piping), ALKO Mobil-Jet 100, year of manufacture 2002

Stanje: pripravljen za uporabo (rabljen), Dvoglava zamikalna žaga Haffner, tip 189, takoj na voljo. Tehnični podatki: Premer žaginega lista 330 mm, maksimalna razdalja med žagami pri 90° 3.330 mm, višina reza pri 90° 90 mm, širina reza 220 mm, višina reza pri 45° 40 mm, minimalna razdalja med žagami pri 90° 360 mm. Žagini listi se lahko nagnejo do 45°, vmesna podpora, agregati za žago so vrtljivi, žagini listi nagibni, pnevmatski vpenjalnik, izvedba zgoraj rezalna, širina nastavljiva ročno, teža cca 380 kg, potrebni prostor dolžina 1,2 m, širina 3,8 m. Stroj je v tehnično brezhibnem stanju in si ga je možno ogledati kadarkoli. Dostava po Nemčiji možna s špedicijo. Za vprašanja pokličite ali pišite. Maschinenhandel Nord, Gerstenstraße 2, 17034 Neubrandenburg. Vse cene so neto, DDV ni vključen – napake pridržane. Kedpfx Asxk Tvkeh Aefa

Stanje: rabljeno, Machine cleaned, lubricated, made operational, function-tested, partially overhauled, adjusted, and trial run conducted. Used, in good condition. Manufacturer: Haffner Kfedpfxovxr R Ho Ah Aja Model: SL 100 Machine No.: 3811 Pillar-type machine Chain assembly Door support Handle hole motor Faceplate motor Lubrication device Space requirement approx. 1200 x 700 x 2000 mm Weight approx. 300 kg Location: 97447 Gerolzhofen, loaded free on truck, unpackaged Sale in as-is condition as inspected, without warranty or guarantee.

Stanje: rabljeno, Used machine Features and technical data: Lock case milling unit Lever hole drilling unit Ksdpfxewhuk Te Ah Aefa Face plate milling cutter Including accessories Motor: 1.7 kW 2800 rpm Location: Mainz Availability: short-term

Stanje: rabljeno, Fraise à serrure de porte Haffner SL100 occasion, testée fonctionnelle Données techniques: Kfedpfxewzkgks Ah Asa - avec jeu de chaîne 16 mm - avec guide-chaîne 9 - 11 mm x 150 mm - avec guide-chaîne 12 - 17 mm x 150 mm - avec guide-chaîne 12 - 17 mm x 175 mm - avec système de lubrification de chaîne - avec 2 serre-pièces manuels - moteur de chaîne 1,7 kW / 2800 tr/min - moteur de fraise pour têtière 0,6 kW / 25000 tr/min - moteur de perçage 0,4 kW / 2800 tr/min - longueur de fraisage (rainure à chaîne) 20 - 450 mm - longueur de fraise pour têtière 315 mm - entre-axe max. des perçages 365 mm - profondeur de fraisage (rainure à chaîne) 150 mm - profondeur max. fraise pour têtière 35 mm - profondeur perçage poignée et trou de clé 65 mm - largeur de fraisage (rainure à chaîne) 6-40 mm - Ø max. fraise pour têtière 35 mm - Ø max. perçage poignée et trou de clé 40 mm - capacité de serrage: - épaisseur de porte 80 mm - largeur max. de porte 1050 mm - largeur min. de porte 550 mm - largeur max. de porte avec entretoise 1250 mm - largeur min. de porte avec entretoise 750 mm - poids 165 kg

Stanje: rabljeno, Double-end profiler, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor - Manufacturer: Haffner, Milling motor type M 30 - Power: 300 W 17,000 rpm Kodpfxeku Hrro Ah Aofa - Voltage: 200 V 300 Hz - Dimensions: 240/70/90 mm - Weight: 2.5 kg

Stanje: zelo dobro (rabljeno), Model: DGS 180 Saw angle adjustable in two planes (vertical and horizontal) Very good condition. Kedpfx Ahogh Hl Ee Aefa

Stanje: zelo dobro (rabljeno), Klinkschnitt saw Haffner KL-176 Kfjdpsfk I U Rjfx Ah Asa

Stanje: rabljeno, used Manufacturer: Haffner Type: SL 100 Column-type machine Door support Kjdpfx Ahovxr R Te Ajfa Workpiece support Handle hole motor Faceplate motor Lubrication device Mechanical workpiece clamping Location: 97447 Gerolzhofen, free loaded, unpacked Transfer in as-inspected condition, without any warranty or guarantee

Stanje: rabljeno, Door Lock Mortiser used, in good condition Manufacturer: Haffner Model: SL 100 Pedestal machine Chain assembly: 12 - 17 / 50 x 150 mm Workpiece support drilling motor (for handle hole) faceplate motor lubrication unit mechanical workpiece clamping Space requirements approx. LxWxH mm: 1500 x 900 x 2010 Location: 97447 Gerolzhofen Kfodpfx Aevwfv Toh Asa Delivery in as-is condition as inspected - loaded free on truck -

Stanje: rabljeno, Door Lock Mortising Machine Used, good condition Brand: Haffner Model: SL 100 Machine No.: 2269 Column-type machine Chain mortising unit Door support Workpiece support Spindle motor for handle hole Faceplate motor Lubrication device Extraction port D 80/100 mm Space requirement approx. 1200 mm x 700 mm x 2000 mm Weight approx. 300 kg Kedpfx Ahjvwfmfj Ajfa Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Stanje: rabljeno, used, excellent condition Manufacturer: Haffner Model: SL 100 Machine No.: 5304 Column-type machine Chain set 12-17, 50x150 Door support Spindle lock motor Faceplate motor Lubrication device Mechanical workpiece clamping Required space approx. 1200 mm x 800 mm x 2000 mm Weight approx. 300 kg Storage location: 97447 Gerolzhofen, ex works loaded, unpacked Kfsdpfx Ajvwfd Rsh Aoa Handover in as-is condition as inspected, without any guarantee or warranty