Skladišče z visokim skladiščem Nosilci paletnih regalov

Meta (Thyssen) Multipal S Abm.: 7.000 x 500 mm

Stanje: dober (rabljeno), Leto izdelave: 2022, Stow Okviri: Bedpeqzhncjfx Ahnolh 9000x1100x100 - 600 kosov - 95 EUR 9500x1100x100 - 200 kosov - 100 EUR 10000x1100x100 - 90 kosov - 105 EUR Nosilci: 2700x130 mm (nosilnost 3000 kg) - 8744 kosov - 11 EUR 3600x160 mm (nosilnost 4000 kg) - 378 kosov - 14 EUR Zaščita nog 890 kosov - 6 EUR/kos

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. Bledpfeh Ek Daox Ahnjh The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, obratovalne ure: 2.444 h, nosilnost: 1.000 kg, dvižna višina: 2.700 mm, vrsta goriva: električni, tip droga: dupleks, gradbena višina: 1.850 mm, dolžina vilic: 1.150 mm, vrsta pogona: Elektro, Visokodvižni viličar Težišče: 600 Tip dvigala: Duplex Stanje: Pripravljen za uporabo in popolnoma funkcionalen Tehnično stanje: dobro Sprednje pnevmatike tip: poliuretan Bljdpsvtu A Uefx Ahnjh Zadnje pnevmatike tip: poliuretan Baterija napetost: 24V Tip baterije: litij-ionska Letnik baterije: 2019 Opis: Vgrajen polnilec, zložljiva platforma za voznika

Stanje: zelo dobro (rabljeno), Dexion P90 pallet racking systems for warehouses. Racks in very good condition. We currently offer approximately 30,000 pallet spaces. Frames available in the following heights: 6000/1100 mm – 98 EUR 7000/1100 mm – 115 EUR 8000/1100 mm – 130 EUR 9000/1100 mm – 147 EUR Beams: BX 120/40/13/2700 mm, capacity 2400 kg – 17 EUR each BX 100/50/15/2700 mm, capacity 2850 kg – 18 EUR each BX 60/40/13/2700 mm, capacity 900 kg – 14 EUR each Invoices are issued. Bjdpfxehq Dd To Ahnolh We invite you to cooperate with us.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level. Bledpfemhhypox Ahnsh

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking, used: Hot-dip galvanized bolt-together system Scope of delivery: - 4 double-sided racking uprights, height 3,500 mm, each with 1,200 mm base parts - 24 cantilever arms, depth 1,200 mm, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. mounting hardware (floor anchors not included) - (*Delivery time approx. 1 week) - (*No damaged parts!) Bledpfxjmkixwo Ahnoh - (*Spare parts and extensions available anytime) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components with hot-dip galvanized finish - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright has 6 bolted cantilever arms and 2 base sections, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (floor anchors not included) - Supplied with assembly instructions and C4 rated load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection available Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notice before delivery. The material is packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, flat, and suitable for anchoring as well as capable of supporting the applied loads. It is the customer's responsibility to check and ensure the suitability and load-bearing capacity of the substrate and obtain any necessary permits. Racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to German safety guidelines, it is recommended that the uprights have a minimum overhang of 500 mm above the highest storage level.

Stanje: rabljeno, prevoženi kilometri: 250 km, moč: 235 kW (319,51 KM), prva registracija: 09/2025, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, barva: bela, vrsta prenosa: samodejen, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 600 mm, Oprema: ABS, filter saj, klimatska naprava, pogon na vsa štiri kolesa, žerjav, MAN TGM 18.320 BB Meiller TRIGENIUS 3S Tipper with Palfinger PK 12.501 Unused exhibition vehicle with day registration * Switchable all-wheel drive 4x4 * Leaf spring suspension front and rear * Meiller three-way tipper TRIGENIUS 4000mm x 2420mm * Side walls 600 mm, front wall 800 mm, M Jet * 7 pairs of recessed lashing rings * Drop-side release right and left * Swing gate * Beacon lights * Two-circuit trailer hydraulics * 40 mm trailer coupling * MAN media system * Automatic transmission * Engine brake * Sun visor * Climatronic air conditioning * On-board computer * Turn assist system * Emergency brake assist * Reversing camera * Multifunction steering wheel * Virtual cockpit * Refrigerator Bodpsxnu Szjfx Ahnjlh * Lifting roof * Electrically heated exterior mirrors * Electric window lifters * Palfinger loading crane PK 12.501 SLD 5 * Central locking with remote control Interim sale and errors expressly reserved! Sale exclusively in accordance with our Terms and Conditions Important Note – Important Information: Despite careful examination of all details in our offer, errors may occur. These are sometimes caused by transmission errors in the systems of various platform providers. Therefore, we would like to point out that all specifications are provided without guarantee and do not constitute legally binding claims. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is intended as information for contract initiation. The details provided here are given without guarantee and do not represent warranted characteristics.

Stanje: novo, Leto izdelave: 2025, Fully automatic carton sealing machine for lids. Efficient, fast, and precise sealing and taping (single direction) of uniform carton sizes in series production. Specifications: - Carton size (LxWxH): 200–600 x 150–500 x 100–500 mm - Max. machine cycle rate (idle): 20 cycles/minute - Power supply: 220/380V, 0.3kW - Tape width: 48/60/75 mm - Machine dimensions (LxWxH): 1770 x 850 x 1520 mm - Weight: 250 kg Blodpjv Nkv Asfx Ahnjh Please note that our new prices are often below common used equipment prices. Feel free to contact us and let us know your packaging requirements. We typically have 30–50 different new machines in stock and available for immediate delivery. For customer-specific machines, we offer very short lead times starting from approx. 3 weeks. All machines come with a full warranty.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) Bledpfx Ahomhh Dhsnjh - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 25/111/615/18, Medium-Size Log Cutting Line Circular Saw Mill - Minimum log diameter: 120 mm - Maximum log diameter: 400 mm - Minimum log length: 1,500 mm - Maximum log length: 3,200 mm - Feed speed: 7.5-24 m/min - Main motor power: 75 + 90 kW - Saw blade diameter: 600 mm Multi-Blade Saw WP210 - Maximum cutting height: 210 mm - Minimum cutting height: 30 mm - Maximum cutting width: 500 mm - Minimum cutting length: 1,500 mm - Feed speed: 5-25 m/min - Main electric motor power: 2x75 kW Blsdpfx Ahjvdtzqsnsh - Saw blade diameter: 350 mm The line includes: - Log Feeder PK2200 - Prism Roller Conveyor - Track-Mounted Circular Saw TT5/600/400 G - Control Panel - Roller Table with Side Board and Slab Discharge Mechanism - Powered Roller Table, 4 m - Reference Roller Table SB4000 - Multi-Blade Saw WP210 - Belt Conveyor, L=25,000 For more information, please contact us by e-mail or phone. Line demonstrations available Monday to Friday, from 08:00 to 16:00.