Jeklene stopnice

Stahl Höhe 2140 mm Geländer beidseitig

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance Lodpfx Abeh Ek Daj Hohk - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Ljdomhhypopfx Ab Hshk Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: novo, Leto izdelave: 2024, Working width: 520 mm Cutterhead: Tersa Number of knives: 4 Joiner table length: 2300 mm Tiltable fence: yes Fold-up jointer tables: pneumatic Maximum planing thickness: 250 mm Thickness table height adjustment: electric with position control Planing thickness display: digital Feed speed: 5/8/12/18 m/min Infeed roller: steel Outfeed roller: rubber Pressure beam: segmented Table rollers: no Motor power: 7.5 kW Motor brake: yes, automatic Extraction port: 160 mm Lodpfx Abjvadxlj Hjhk Machine length: 2300 mm Machine width: 1100 mm Weight: 980 kg

Stanje: rabljeno, Leto izdelave: 2021, obratovalne ure: 3.350 h, Oprema: klimatska naprava, Lastna masa: 16.000 kg Dimenzije (D x Š x V): 777 x 249 x 296 cm Tip motorja: Deutz DEUTZ TCD 3.6L4 Lhjdpfezi Eb Asx Ab Hek

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Novi mulčer Green-Tec MT2, pripravljen za delo. - Dimenzije: • Dolžina: 3,4 metra (11 čevljev 1 palec) • Širina: 2 metra (6 čevljev 6,75 palca) • Višina: 2,4 metra (7 čevljev 10,5 palca) Ljdpfx Ajzn H Tqsb Hshk - Osnovna teža: 6740 kg - Motor: Cummins B4.5 T4F/STG V, 115 kW (155 KM) - Prenos: Hidrostatični pogon - Rezervoar za gorivo: 160 litrov (42 galon)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking, used: Hot-dip galvanized bolt-together system Scope of delivery: - 4 double-sided racking uprights, height 3,500 mm, each with 1,200 mm base parts - 24 cantilever arms, depth 1,200 mm, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. mounting hardware (floor anchors not included) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available anytime) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components with hot-dip galvanized finish - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright has 6 bolted cantilever arms and 2 base sections, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (floor anchors not included) - Supplied with assembly instructions and C4 rated load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection available Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notice before delivery. The material is packed for easy unloading. Ledsmkixwjpfx Ab Hshk When installing outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, flat, and suitable for anchoring as well as capable of supporting the applied loads. It is the customer's responsibility to check and ensure the suitability and load-bearing capacity of the substrate and obtain any necessary permits. Racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to German safety guidelines, it is recommended that the uprights have a minimum overhang of 500 mm above the highest storage level.

Stanje: rabljeno, barva: drugo, Leto izdelave: 2018, obratovalne ure: 2.695 h, Pogon: Gosenice Moč motorja z notranjim izgorevanjem: 47 KM (35 kW) Dovoljena skupna masa: 4.662 kg Proizvajalec motorja: Perkins CE oznaka: da Serijska številka: JCB048Z1PJ1921665 Stroji na prodaj Lhjdpfow H Abdex Ab Hjk Prebrskajte našo spletno stran za različne stroje, ki so pripravljeni za nakup. Imamo več možnosti, kot jih vidite na spletu, zato nas lahko kadar koli pokličete ali pošljete e-pošto. Vsi naši stroji so popolnoma vzdrževani in preverjeni za zanesljivost. Potrebujete slike? Kontaktirajte nas in jih bomo hitro poslali. Na voljo smo za pomoč v nizozemščini, angleščini, francoščini, nemščini, španščini in ruščini. Odkrijte našo široko ponudbo zanesljivih strojev.

Stanje: rabljeno, prevoženi kilometri: 250 km, moč: 235 kW (319,51 KM), prva registracija: 09/2025, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, barva: bela, vrsta prenosa: samodejen, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 600 mm, Oprema: ABS, filter saj, klimatska naprava, pogon na vsa štiri kolesa, žerjav, MAN TGM 18.320 BB Meiller TRIGENIUS 3S Tipper with Palfinger PK 12.501 Unused exhibition vehicle with day registration * Switchable all-wheel drive 4x4 * Leaf spring suspension front and rear * Meiller three-way tipper TRIGENIUS 4000mm x 2420mm * Side walls 600 mm, front wall 800 mm, M Jet * 7 pairs of recessed lashing rings * Drop-side release right and left * Swing gate * Beacon lights * Two-circuit trailer hydraulics * 40 mm trailer coupling * MAN media system * Automatic transmission * Engine brake * Sun visor * Climatronic air conditioning Ljdpfx Aexnu Szeb Hjhk * On-board computer * Turn assist system * Emergency brake assist * Reversing camera * Multifunction steering wheel * Virtual cockpit * Refrigerator * Lifting roof * Electrically heated exterior mirrors * Electric window lifters * Palfinger loading crane PK 12.501 SLD 5 * Central locking with remote control Interim sale and errors expressly reserved! Sale exclusively in accordance with our Terms and Conditions Important Note – Important Information: Despite careful examination of all details in our offer, errors may occur. These are sometimes caused by transmission errors in the systems of various platform providers. Therefore, we would like to point out that all specifications are provided without guarantee and do not constitute legally binding claims. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is intended as information for contract initiation. The details provided here are given without guarantee and do not represent warranted characteristics.

Stanje: rabljeno, vrsta goriva: dizel, prva registracija: 06/2014, Leto izdelave: 2014, obratovalne ure: 2.900 h, Excavator Hitachi ZX33U-5A CLR – 2,900 operating hours – air conditioning – CW 5 – quick coupler system and auxiliary hydraulic lines – total weight 3,320 kg – = Further information = Model year: 2014 Ljdpfxjw A Thmo Ab Hjhk Drive: crawler Unladen weight: 3,320 kg Please contact Miguel Cubas for further information. = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday from 8:30 a.m. to 7:00 p.m. continuously.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: UB421, prevoženi kilometri: 154.542 km, moč: 95 kW (129,16 KM), prva registracija: 01/2009, vrsta goriva: dizel, lastna masa: 4.010 kg, največja dovoljena obremenitev: 1.990 kg, skupna masa: 6.000 kg, konfiguracija osi: 4x2, naslednji pregled (TÜV): 01/2027, gorivo: dizel, barva: oranžna, vrsta prenosa: samodejen, emisijski razred: Euro 4, število sedežev: 6, dolžina tovornega prostora: 2.950 mm, širina tovornega prostora: 2.200 mm, višina nakladalnega prostora: 1.450 mm, Oprema: ABS, airbag, drsna vrata, filter saj, nagibni voziček, zapora diferenciala, MB Vario 613 D Tipper Double cab with 6 seats Vehicle from first owner Ex-municipal / government vehicle Low emissions Euro 4 (BlueTec4) Green environmental badge Automatic transmission Twin rear wheels Lsdpfxerpmwkj Ab Hjhk Rear axle differential lock Former city vehicle Amber beacon lights Isri comfort driver's seat Power steering Driver airbag Electric exterior mirrors Radio with CD Swedish skylight Loading area dimensions in mm L: 2150/2950 W: 2200 H: 1450 The loading area is divided into two compartments: 1x 2150L, 1x 800L; can be converted to one loading area, then 2950L Payload 1,990 kg Kerb weight 4,010 kg Gross vehicle weight 6,000 kg Wheelbase 3,700 mm Ready for immediate use Subject to errors, changes, and prior sale We sell exclusively according to our terms and under exclusion of any warranty. Subject to errors, changes, and prior sale. We are available Monday to Friday from 9:00 to 17:00 continuously, Saturdays by appointment. Outside these hours, appointments by phone are possible. We are happy to accept your used equipment/vehicle in trade-in. Sales to commercial customers and exporters are preferred; this applies to our entire vehicle inventory. All above details are non-binding, subject to errors, changes, and prior sale!