Wewira 8000 Kg Länge 4070 Mm nakup rabljenega (99.520)

Stanje: rabljeno, Adjustable spreader beam, crane spreader beam, spreader for pillar jib crane, overhead crane, workstation crane, chain hoist - Spreader beam suitable for transporting a wide variety of loads - Load capacity: 8,000 kg Iisdpfx Alefbuwcj Nea - Dimensions: 4070/230/H770 mm - Dead weight: 715 kg

Stanje: dober (rabljeno), Overhead crane, crane, crane runway, crane rails, steel beam, medium-width I-beam, double-T beam, IPE steel beam with manual trolley, geared trolley, crane trolley, trolley drive, crane drive, crane carriage, push trolley - Beam type: IPE 240 - Flange width: 120 mm Iisdpofwg Icofx Al Nja - Equipment: 1x IPE steel beam, 1x manual trolley, 2x adjustable stops - Load capacity: 1,000 kg - Dimensions: 5H245 mm - Weight: 182 kg

Leto izdelave: 2000, stanje: rabljeno, Load turning device, load turning beam, load turning mechanism, lifting beam, adjustable lifting beam, crane beam, beam for column slewing crane, overhead crane, workstation crane, chain hoist -Manufacturer: GT-Hebetechnik, crane beam for transporting various types of loads -Lifting capacity: 8,000 kg -Hook spacing: min. 1,000 mm / max. 2,500 mm -Steel wire rope: Ø 22 mm, length 1,600 mm -Overall dimensions: 2,620/360/H890 mm Iodpfsg Dvyujx Al Neia -Dead weight: 304 kg

Stanje: rabljeno, Load turning device, load turning beam, load turning apparatus, lifting beam, adjustable lifting beam, crane beam, beam for column slewing crane, indoor crane, workstation crane, chain hoist - Crane beam: adjustable, suitable for transporting various loads - Load capacity: 6,500 kg Iiodpfx Alsg Dvyqs Noa - Hook spacing: min. 1,460 mm / max. 2,880 mm - Steel cable: Ø 22 mm, length 1,580 mm - Overall dimensions: 3,025/190/H945 mm - Dead weight: 230 kg

Stanje: zelo dobro (rabljeno), Naprodaj profesionalna granitna merilna plošča (traserska plošča), uporabljena za kontrolo kakovosti in v orodjarnah. Plošča je izdelana iz visokokakovostnega tehničnega granita, ki zagotavlja zelo dobro dimenzijsko stabilnost ter odpornost na obrabo. Idealna za natančne meritve, trasiranje ter kontrolo elementov. Komplet je postavljen na robustno jekleno podlago. Oprema izvira iz industrijskega obrata. ⸻ Tehnični podatki • Tip: merilna / traserska plošča • Material: tehnični granit • Dimenzije plošče: približno 1600 × 1000 mm • Debelina: približno 200 mm Isdpfx Aeyuqtpsl Nsia • Masa: približno 1014 kg • Podnožje: jeklena konstrukcija Na plošči je nalepljena kalibracijska nalepka podjetja Trescal. ⸻ Uporaba • kontrola kakovosti • orodjarne • CNC industrija • precizno merjenje • trasiranje elementov

Stanje: pripravljen za uporabo (rabljen), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank We are offering a used CS Sigma profile for sale here. The listed price refers to the price per piece. Scope of delivery includes: 01x CS Sigma profile, used Material colour: cream white Profile length: approx. 2,200 mm CS profile dimensions: approx. 150 x 50 x 15 mm Material thickness: approx. 2.25 mm Iisdpfx Alsgfbyzs Nsa Weight per piece: approx. 10.5 kg The CS Sigma profiles may be bent or show minor damage or signs of surface rust. Overview of our services: (Prices upon request) Assembly and installation Please observe our general assembly conditions. Racking inspection Racking inspection according to DIN EN 15635, performed in accordance with BGR 234 visual inspection requirements for all racking systems. Delivery with our own fleet (unloading not included)

Stanje: rabljeno, Technical Data for Shelving Rack: Shelving System: SSI Schäfer Type: R 3000 Technical Data for Installation: Number of rack rows: 01 pcs. Rack length: 1,056 mm Number of bays per rack row: 01 pcs. Included in the scope of delivery: Iijdpfjttl Euox Al Nsa 02x Upright frames, used Material color: sendzimir galvanized Frame profile dimensions: 31 x 60 mm Including cross bracing and base plates The frames are pre-assembled 2,278 mm high 400 mm deep 08x Shelf panels, used Designation: ZB 4423 V Material color: sendzimir galvanized Dimensions: 994 x 400 x 30 mm Weight | per unit: approx. 4.65 kg Maximum load per shelf panel: 200 kg with evenly distributed load 21x Free-standing shelf dividers, used Designation: TRF 44 27 Material color: sendzimir galvanized Clear shelf height: 291 mm 02x Side walls, used Designation: SWI 3422 Material color: sendzimir galvanized Dimensions: 2,275 x 275 mm 01x Cross brace, used Designation: KV31013 Material color: sendzimir galvanized Your contacts in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: This item is only available for collection. Any shipment or delivery service requested is associated with additional costs, which can be quoted separately depending on the delivery location and scope.

Stanje: dober (rabljeno), Included in the scope of delivery: 01x Lattice beam, used Manufacturer: Mecalux Colour: blue Length: approx. 1,057 mm Center-to-center hole spacing: approx. 997 mm Iiedpfx Aei Dxxlsl Nja Bore diameter: approx. 10.5 mm Section: C 40x25x8 mm Weight: 1.150 kg | each General information about the item: This item is offered for collection only. If transport or shipping of this item is required, additional costs will apply, which can be requested separately depending on the delivery location or the scope of delivery.

Stanje: skoraj kot novo (rabljeno), Expected stock: approx. 840 units. We are offering here a second-choice lattice girder from the manufacturer SSI Schäfer for purchase. Technical data for the lattice girder: Racking system: SSI Schäfer Type: PR 600 Scope of delivery: 01x lattice girder, second-choice Material finish: Sendzimir galvanized Total length: approx. 1,270.0 mm Center-to-center hole: approx. 1,230.0 mm Profile dimensions: C 40 x 30 x 8 mm Hole diameter: approx. 11 mm Material thickness: approx. 1.25 mm Weight per unit: approx. 1.35 kg General information about the item: Iijdpfx Alsh Eg Agj Nsa This item is only offered for collection. If transport or shipping of this item is required, it will incur additional costs, which can be requested individually from us depending on the delivery location or scope of delivery.

Stanje: zelo dobro (rabljeno), We are offering here a second-choice lattice brace from the manufacturer SSI Schäfer for sale. Technical data for the lattice brace: Racking system: SSI Schäfer Type: PR 600 Iiedpfxeh Eg Ans Al Nja Included in the delivery: 01x Lattice brace, second-choice Material color: sendzimir galvanized Total length: approx. 1,208.8 mm Center-to-center hole distance: approx. 1,168.8 mm Profile dimensions: C 40 x 30 x 8 mm Hole diameter: approx. 11 mm Material thickness: approx. 1.25 mm General information about the item: This item is only offered for collection. If transport or shipping of this item is desired beyond that, it will incur additional costs, which can be requested from us separately depending on the delivery location or the scope of delivery.

Stanje: dober (rabljeno), Included in the scope of delivery: Iedpji Eu Dvefx Al Nsia 01x Compartment divider, used Material color: grey-white Total length: approx. 775 mm Tube length: 650 mm + 5 mm plastic cap Cross-section: square tube 20 x 20 mm Opening dimension: approx. 103 mm Weight: 0.93 kg | each

Stanje: pripravljen za uporabo (rabljen), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank We are offering a used CS Sigma profile for sale here. The stated price refers to the price per piece. The scope of delivery includes: 01x CS Sigma profile, used Material color: cream white Profile length: approx. 2,000 mm CS profile dimensions: approx. 150 x 50 x 15 mm Material thickness: approx. 2.25 mm Weight per unit: approx. 10.0 kg The CS Sigma profiles may be bent and/or show minor damage or traces of rust. Iedogfbytspfx Al Noia Our services at a glance: (Prices on request) Assembly and installation Please observe our general assembly conditions Racking inspection Racking inspection in accordance with DIN EN 15635, carried out according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (unloading not included)

Stanje: dober (rabljeno), Included in delivery: 01x Truss brace, used Manufacturer: Mecalux Material color: blue Length: approx. 851 mm Center-to-center hole distance: approx. 795 mm Hole diameter: approx. 10.5 mm Iijdpfsi Dx Iijx Al Nja Cross-section: C 40x25x8 mm Weight: 0.930 kg | each. General information about the item: This item is available for collection only. If transport or shipping of this item is required, additional costs will apply. These can be individually requested from us depending on the delivery location and scope of delivery.

Stanje: dober (rabljeno), Technical data for the extension brackets: Manufacturer: Jung Heinrich Type: MPB Scope of delivery: 02x extension brackets, used Total length: approx. 400 mm Total width: approx. 129 mm Internal width: approx. 121 mm For frame profile width: approx. 120 mm Depth: approx. 49 mm Material thickness: approx. 4.00 mm Hole spacing (depth): approx. 100 mm Hole pattern (width x height): approx. 85 x 100 mm Drill hole diameter: approx. 10 mm Material colour: blue Iedpfoipt Ddjx Al Noia Weight per piece: approx. 2.59 kg Note: No fastening material included in the scope of delivery.

Stanje: dober (rabljeno), We are offering a second-choice lattice beam from SSI Schäfer for sale. Technical details for the lattice beam: Racking system: SSI Schäfer Type: PR 600 Scope of delivery: 01x lattice beam, second-choice Material finish: Sendzimir-galvanized Total length: approx. 1,304.4 mm Hole center-to-center: approx. 1,264.4 mm Profile dimensions: C 40 x 30 x 8 mm Hole diameter: approx. 11 mm Material thickness: approx. 1.25 mm Weight per piece: approx. 1.38 kg General information about this item: This item is available for collection only. If transport/shipping is required, this will incur additional costs, which can be provided separately depending on the delivery location and scope. Iijdpfx Aljh Eg Ace Nsa

Stanje: zelo dobro (rabljeno), We are offering a second-choice lattice beam from the manufacturer SSI Schäfer for purchase. Technical data for the lattice beam: Racking system: SSI Schäfer Type: PR 600 Scope of delivery includes: 01x Lattice beam, second-choice Material finish: Sendzimir galvanized Overall length: approx. 1,249.2 mm Hole center-to-center: approx. 1,209.2 mm Profile dimensions: C 40 x 30 x 8 mm Hole diameter: approx. 11 mm Iisdpfx Ash Eg Akol Nja Material thickness: approx. 1.25 mm General information about the item: This item is only available for collection. Any additional transportation or shipping of this item will incur extra costs, which can be quoted separately depending on the delivery location and scope.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm Iiodpomhhypefx Al Noa - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Iodpfx Aljmhh Dho Noia Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards - Technical telephone support - Made in Germany Ijdsmhh Dzepfx Al Nsia - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening materials (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts available for reorder and extensions can be supplied at any time) Ijdpomhhx Isfx Al Neia - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fixing materials (without floor anchors) - With assembly instructions and C4 load labels as per DIN standard - Professional telephone advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with pre-delivery notification. Material is packaged for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowels, and able to accommodate the applied loads. Floor quality, load-bearing capacity, and any required official permits are to be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to the German employers’ liability insurance association, it is recommended that the rack uprights have a minimum 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard type - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms as standard (=4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) Ijdpfxemhhyao Al Njia - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable transport with prior notice before delivery. The material is efficiently packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The foundation must be made of concrete, level, suitable for dowelling, and able to bear the applied loads. The suitability and load-bearing capacity of the floor, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to a wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the upright has at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles Isdsh Ek Daopfx Al Njia - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Iiodjmhh Anopfx Al Nea Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. Iiedpfsmhhf Sex Al Nja The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Screw system in hot-dip galvanized design: Pickup price: Robust steel construction made of IPE sections Rack height: 3,500 mm Iijdpfxsmhhl He Al Nja Load capacity per upright: 2,100 kg Base section: 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Each upright equipped with 3 bolted cantilever arms, usable depth 1,200 mm, standard (equals 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Mounting hardware included (ground anchors not included) Supplied with assembly instructions and C4 load capacity labels according to DIN standards