Unotech Gmbh Upaxx 70 nakup rabljenega (74.378)

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2019, obratovalne ure: 3.000 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 70 t, skupna masa: 9.500 kg, širina odprtine za polnjenje: 420 mm, dolžina polnilne odprtine: 1.250 mm, Technical Data - Baling Press / Can Press / Sheet Metal Press: Csdeu Th S Sopfx Agtjgt Manufacturer: unoTech GmbH Model: UPAXX 70 Year of manufacture: 2019 Operating hours: approx. 3,000 hours Pressing force: 700 kN at 315 bar Filling opening (hopper): 420 x 1,250 mm (D x W) Channel cross-section (bale size): 350 x 500 mm (H x W), length depending on material Drive power: 30 kW Connected load: 40 kW Total current consumption: 70 A Throughput rate for empty beverage cans with: • one press stroke: approx. 1.7 t/h • two press strokes: approx. 2.5 t/h Achieved compaction: approx. 1,200 kg/m³ Hydraulic oil tank capacity: 850 L Press dimensions (assembled): 8,000 x 1,600 x 2,500 mm (L x W x H) Transport weight (press): approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press chamber made of wear-resistant steel S355 Material suitability: According to the manufacturer, this machine is suitable for pressing tin cans, sheet metal offcuts, steel sheet, as well as aluminum, brass, and copper scrap. Condition of the baling press: The baling press has been completely overhauled in our workshop. The press is in very good condition (see the function video after overhaul) and is sold with a 12-month OBM parts warranty. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematic). Inspection is possible by appointment. No liability is assumed for technical data or possible errors.

Leto izdelave: 2004, obratovalne ure: 34.304 h, stanje: zelo dobro (rabljeno), Weiss Climate Test Chamber -70 to +180 °C Manufacturer: Weiss Umwelttechnik GmbH Model: Climatic Chamber WK-1000/70 Test Chamber Volume: 990 liters Temperature Range: -70 to +180 °C Humidity: 10 to 98% Mains Voltage: 400 V 3/N 50 Hz Rated Current: 29 A Rated Power: 13.8 kW Refrigerant: R 404A Control System Microprocessor-controlled regulation and monitoring system SIMCON/32 • 32-bit technology Cgjdpfx Agsph U Aystst • Graphic display of setpoint and actual values • Digital setpoint and actual value display for temperature and % relative humidity • Digital entry for temperature in °C and humidity in % relative humidity • Integrated program controller • Program memory • Manual and automatic operation • Fault diagnosis system Operating Hours: 34,303.8 h Year of Manufacture: 2004 Test Chamber Dimensions: Height: 950 mm Width: 1100 mm Depth: 950 mm External Dimensions: Width: 1400 mm Depth: 1900 mm Height: 1970 mm Financing through our bank is also possible. complett-konzept.leasingo.de More items — new and used — are available in our shop! International shipping costs on request!

Stanje: novo, Leto izdelave: 2025, THE COST-EFFECTIVE MANDREL BENDING MACHINE FOR TIGHT BENDING RADII This bending system offers solutions for complex geometries with standard radii of 2xD for tube dimensions from 20 - 90 mm. Depending on the material quality and wall thickness ratio, radii of 1.5xD are also feasible for series production. With a tool height of 120 mm, there are also ample possibilities for special profiles. The highly precise and powerful electric drive of the bending axis, as well as the stable and robust construction of the mandrel carrier and bending arm, contribute to the desired bending results. Quick-change bending tools allow rapid conversion to different tube dimensions. The clamping pressure for tube securing is optimally adjustable. The PLC control system (expandable via USB stick) with data storage and the latest X2X interface can store virtually unlimited programs for bend angles, lengths, and rotation angles for up to 50 bend sequences per tube. For monitoring spring-back values, a freely programmable database is available for up to 200 materials. The control offers two operation modes: In "Simple Bending", tube segment lengths and rotation are automatically displayed in relation to each other. In "Controlled Bending" mode, data is entered beforehand and a continuous target/actual comparison is performed during bending. Cedpfxsnh R Sue Agtegt Also available with pneumatic rotation stop or with gearbox-assisted positioning for length and rotation. POTENTIAL APPLICATIONS: • Plant construction, e.g., chemical industry • Hydraulic piping • Metalworking • Prototype construction • Piping installation TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mm Bending capacity 9000: Ø 20 to 90 x 5 mm (depending on material) • Bending radius min/max: 40 mm / 250 mm • Minimum bending radii: 1.5 x Ø (Standard: 2 x Ø) • Multifunction machine control for angle adjustment (0.1°) • Mandrel bar lengths: 3000 / 4500 / 6000 mm • Maximum 180º bending result • Weight: 1600-3200 kg (depending on version) • Ergonomic operation via safety foot pedal OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Larger bending radius up to 300 mm • Positioning of length and rotation via automatic brake function or manual stops using foot pedal • Semi-automatic length and rotation positioning using servomotors • Automatic tool retraction • Tube calculation software • 10-inch touchscreen with integrated tube calculation • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICE: • Welcome to perform test production at our in-house demo room • Consultation and information meetings at your site • Leasing/financing advice and processing via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Stanje: rabljeno, Vzdolžna krožna žaga Krožna žaga za vzdolžni rez Prečna žaga / vzdolžna krožna žaga, l. 1999 deluje od spodaj za dolžine do 4,7 m debelina materiala do 110 mm primerna tudi kot premična žaga za proizvodno linijo Csdpeq E Ivtjfx Agtegt INFO!! Za tak nov Flender krožni žagin ploščati motor 10 kW plačate 4700 EUR, torej več kot pri podjetju Jöma za celoten stroj.

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 6034, potovalna razdalja osi X: 7.200 mm, pomik osi Y: 450 mm, pomik po osi Z: 590 mm, hitro pomikanje X-os: 50 m/min, hitri pomik os Y: 25 m/min, hitri pomik na osi Z: 25 m/min, nazivna (navidezna) moč: 45 kVA, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: Bahnsteuerung iTNC 530, skupna višina: 2.900 mm, skupna dolžina: 12.500 mm, skupna širina: 4.810 mm, skupna masa: 14.000 kg, hitrost vretena (min.): 100 obr/min, največja hitrost vretena: 12.000 obr/min, obratovalni tlak: 7 letvica, The BZ 7000 is designed exclusively for milling, drilling, countersinking, reaming, and thread cutting of metals, aluminum, plastics, and wood (chipboard and solid wood). URBAN CNC Machining Center BZ 7000 • Year of manufacture: 04/2008 • Control: HEIDENHAIN contouring control iTNC 530 • 4 axes • Travel paths X / Y / Z axes: 7200 / 450 / 590 mm • Working area X / Y / Z axes: 7000 / 400 / 350 mm • Weight: 14 t Equipment - Robust base structure as a welded frame construction - Linear ball guideways on all axes - Milling spindle unit: 100 - 12,000 rpm, tool holder SK 40 Drives: - X-axis (50 m/min) by rack-and-pinion drive - Y/Z axes (25 m/min) by ball screw drive - B-axis 9,000°/min - Swiveling operator panel - Automatic central lubrication - Traveling tool changer for 12 tool holders SK 40 - Coolant emulsion system - Machine lamp - Safety fence - Electronic handwheel integrated into the control panel - Chip drawers - Laser scanner Cgodpjyzxfnefx Agtot - Minimum quantity lubrication Technical Data - Compressed air connection: R 3/8" / 6 bar - Device connection: R 1/4" - Operating pressure: approx. 6 bar - Air consumption per cycle: approx. 600 l/min at 6 bar - Electrical connection: 3 x 400 V +/- 5% / 50 - 60 Hz - Control voltage: 24 V DC - Rapid traverse: X-Y-Z 50 – 25 – 25 m/min - Infinitely variable feed: 0 – 5,000 mm/min - Tool change: disc changer with 12 tool stations SK 40 - Tool holder: SK 40 - Tool clamping: hydraulic - Coolant system: emulsion, 300 liters - Spindle speed: 100 – 12,000 rpm - Speed correction: 80 – 120% - Drilling capacity in St 60 / Al: up to 28 mm Ø - Thread cutting capacity in St 60 / Al: up to M24 - Position measuring system: rotary encoder/length measuring system - Positioning accuracy: 0.025 mm - Repeatability: 0.015 mm - Control: HEIDENHAIN iTNC 530 M, 4 controlled axes - Data interface: V 24/RS - 232 - C - Travel paths X / Y / Z axes: 7,200 / 450 / 590 mm - Working area X / Y / Z axes: 7,000 / 400 / 350 mm - Space requirement with safety fence: approx. 60 m² (12.5 x 4.8 m) - Machine weight with accessories: approx. 14 t - Sound emission: average sound pressure level 79 dB (A)

Stanje: dober (rabljeno), Leto izdelave: 2003, Filtration is performed by an internal filter unit - Manufacturer: Atlantik GmbH - Model: 30.701.31.15100 - Operating pressure: 10 bar - Filtered particle size: 6.0 µm (microns) - Dimensions: 1050 x 1150 x 1620 mm Cedpfxoiw Eafo Agtegt - Capacity: 425 l - Electrical specifications: 250 V, 5 A, 50/60 Hz - Year of manufacture: 2003

Leto izdelave: 2012, stanje: potreben popravila (rabljeno), Funkcionalnost: omejena funkcionalnost, popolnoma avtomatiziran testni sistem za preizkušanje komponent gorivnih celic\nmaks. moč 500 W (maks. tok: 100A, maks. napetost: 35V)\nPlini so lahko temperaturno regulirani, vlaženi in tlačno obdelani, na voljo je tudi izpiranje z dušikom\nAnoda: 0,04-2 Nl/min vodika, katoda: 0,1-5 Nl/min zraka oz. 0,02-1 Nl/min kisika\n\nVključuje napajalni kabel, originalno programsko opremo Testwork® proizvajalca in merilni računalnik\n\nCentralna krmilna enota (PLC) okvarjena Cgodpfx Aeytr R Hjgtet

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, dolžina vrvi: 30.000 mm, hitrost vrvi: 47.000 mm/min, številka stroja/vozila: HAW1700-EV-Funk, Hydraulic cable winch for log splitters, cranes, mini-excavators, tractors, vineyard and horticultural machines, and many other applications. With the hydraulic auxiliary winch, you can make many tasks easier: - Pull and position firewood for the log splitter - Load logs onto trailers - Extract root stumps and trees - Serve as an auxiliary winch for forestry cranes and small excavators - Winch for compact tractors and narrow-track tractors Robust steel construction with three-sided mounting options (left, right, rear) and 12 threaded holes, offering flexible mounting possibilities (threads are cut and painted; for corrosion protection, they should be re-tapped before use). Equipped with a 20 m long, 6 mm thick steel cable. Large cable drum for prolonged cable life. We supply hydraulic motors from 50 to 630 ccm (standard = 400 ccm), depending on the required speed and pull force. Maximum working pressure: 225 bar peak Continuous pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Continuous operating torque: 380 Nm Maximum pulling force: 1700 kg Weight: 49 kg Cable speed: 47 m/min at 60 L/min hydraulic oil flow Colour: red Dimensions: Length: 500 mm Length with pendulum: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: +30 mm Motor width: +200 mm Height: 250 mm The winch is available for bolt-on or weld-on installation. This version is equipped with an electric hydraulic valve, radio remote control, and hoses to the motor. Article number: HAW1700-EV-RC Cjdpfx Ajdf Ufpsgtogt

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, obratovalne ure: 180 h, Funkcionalnost: popolnoma funkcionalen, Rezilo/drobilec ostružkov z enim gredom Rešetka z luknjami za določitev dolžine ostružkov Kompaktna in ojačana izvedba za vse vrste ostružkov, tudi s grobimi delci v materialu. Glavne mere: dolžina 3200 mm x širina 2800 mm x višina 3035 mm Dovajalni lijak: 1500 mm x 1500 mm Dovajalna odprtina: 700 mm x 7400 mm Pogonska moč cca 37 kW Cgsdpfx Asxy Idhsgtjt Teža: 6000 kg Premer drobilnega rotorja: 290 mm Zmogljivost na uro cca 1,5 - 2,5 t/h glede na material Krmiljenje S7 300, vključno z vsemi komponentami in ožičenjem Lokacija: Avstrija Na voljo takoj

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Na voljo sta 2 sušilca stisnjenega zraka znamke Farrag; več tehničnih informacij na zahtevo. Nova cena približno 6500€. Tip 1: SCARD 100 Tip 2: SCARD 70 Csdpfxevkdkis Agtjgt Leto izdelave: 2005 Moč: 3,1 kW

Stanje: novo, Leto izdelave: 2026, Machine designation: Gantry Nailing Machine for the Pallet & Packaging Industry Manufacturer: Stoiber GmbH Model: StoNail 7000 Year of manufacture: 2026 Condition: New Price & Location: Price on request 4122 Arnreit Description: • Suitable for the production of various pallet and crate components • Inclined machine frame with wooden wall for templates • Divided into two working areas, allowing the operator to alternate between the left and right side of the machine • The nailing bridge is equipped with up to 6 individually controlled nailing units for jumbo coil nails (approx. 6,000 nails) • Machine operation and programming of new pallet types are performed via touch display • Existing programs can be retrieved from memory at any time • Entered parameters are visualized on the touch display—no manual positioning required for teaching nail points! • NEW – Pallet stacking robot! Technical data: • Max. pallet size (standard): 3,000 x 1,700 mm per side Codpforallnsx Agtsgt • Max. pallet size (optional): 4,000 x 2,000 mm per side • Max. nail length: 130 mm • Jumbo coil: approx. 1,000 nails/coil • Production capacity: 400 – 600 pallets/8 h • Operators required: 1 – 2 persons • Low operating and maintenance costs

Stanje: novo, Leto izdelave: 2026, Machine designation: Gantry Nailing Machine for the Pallet & Packaging Industry Manufacturer: Stoiber GmbH Model: StoNail 7000 RT Year of manufacture: 2026 Condition: New Price & location: Price on request 4122 Arnreit Description: • Semi-automatic gantry nailing machine with rotary turntable (R) and pallet stacking robot for the production and stacking of various types of pallets and crate components. • The machine incorporates a rotary turntable with two work areas for loading loose blocks and boards. Combined with the pallet stacking robot, this ensures an optimal material flow. • The nailing bridge is equipped with up to 6 individually controlled nailing units, each for jumbo coil nails (approx. 6,000 nails), providing maximum flexibility for the nailing of your products. • Machine operation and programming of new pallet types is performed via a touch display. Existing programs can be retrieved from memory at any time. With the entered parameters, the products are visualized on the touch screen. No manual teach-in for nailing points required! Cjdpfxorallrj Agtogt • NEW – Pallet stacking robot Technical data: • Max. pallet size: 3,000 x 1,700 mm per side • Max. nail length: 130 mm • Jumbo coil: approx. 1,000 nails/coil • Production capacity: 400–600 pallets/8 h • Operators: 1–2 persons • Low operating and maintenance costs

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Klöckner Ionon GmbH je podjetje, specializirano za plazemsko nitriranje in prevlečne tehnologije. Modelna oznaka S800/7000 se nanaša na specifičen sistem za plazemsko nitriranje (vakuumska peč), ki se uporablja za površinsko kaljenje jeklenih komponent. Plasmanitriding Technology Dr. Böhm GmbH +2 Spodaj so značilne tehnične značilnosti in uporabe za sisteme te velikosti: Tehnične značilnosti (S-serija) Proces: Plazemsko nitriranje, plazemsko nitrokarboniziranje (za povečanje odpornosti proti obrabi in koroziji). Tip sistema: Vertikalni ali horizontalni reaktor (vakuumska peč). Dimenzije (S800): Oznaka »800« običajno pomeni uporabni premer komore (približno 800 mm), medtem ko »7000« lahko označuje serijo sistema ali specifično višino/volumen. Funkcije: Natančen nadzor spojne plasti, primerno kot predobdelava za PVD. Cgodpfxeytl Hho Agtet

Stanje: dober (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 4 t, širina odprtine za polnjenje: 730 mm, dolžina polnilne odprtine: 400 mm, dolžina bale: 700 mm, širina bale: 350 mm, višina bale: 500 mm, teža bale: 40 kg, skupna širina: 988 mm, skupna višina: 2.033 mm, skupna dolžina: 752 mm, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 230 V, skupna masa: 380 kg, raven hrupa: 60 dB, moč: 1,5 kW (2,04 KM), vhodna frekvenca: 50 Hz, Popolnoma funkcionalna in preizkušena vertikalna bala za pakiranje manjših količin kartona ali plastike. Več informacij ali fotografij po e-pošti ali telefonu. Cgsdovy Drxspfx Agtst

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Technical Specifications: Operating Voltage: 400V AC Main Fuse: 50A Frequency: 50Hz Cedpjxzug Sefx Agtegt Electrical Connected Load: 19.1kW Control Voltage: 24V DC Air Pressure: 6 bar Production Capacity: 20 x 2m modules/h Degree of Automation: Fully automatic Installation Dimensions: 12.5 x 5.2 x 4m (width x height x depth) Stations: Decoiler: This station holds the coil and unwinds the product part. Manufacturer: Robust Habicht & Heuser GmbH & Co. KG Type: URM-1400 Cosmetic Tape Applicator: Applies a cosmetic tape to the rear module edge of the product part using an applicator. Manufacturer: Printum Laser Cell: Creates contact openings by laser at the rear module edge of the product part and checks correct opening of the contacts using pneumatic Ignun contact pins. Manufacturer: ACSYS Lasertechnik GmbH CO² Laser INLINER II 40W CO2 Inspection Station: Empty cell for test procedures with sample materials. Transfer Tape Applicator Cell: Applies a transfer tape to the rear module edge of the product part using an applicator. Contact Ribbon Applicator Cell: Inserts preforms (solder pads) into the opened contact openings and then applies a contact ribbon to the rear module edge of the product part using an applicator. Soldering Station: Establishes the electrical contacts by soldering the preforms (solder pads) to the contact ribbon. Manufacturer: ATN Automatisierungstechnik Niemeier GmbH Flashing Station: Tests functionality of the product part via flashing and simultaneous contacting by pneumatic Ignun contact pins. Manufacturer: WAVELABS Solar Metrology Systems GmbH Type: WLAAA0039 Designation: Module Flasher Empty Cell: Currently no processing of the product part. Recoiler: This station holds the coil and rewinds the product part. Manufacturer: Robust Habicht & Heuser GmbH & Co. KG Type: URM-1400

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Aluminijasta zabojna nadgradnja za Iveco 70 C s 3 roletami, 3000-litrski rezervoar za vodo iz nerjavečega jekla z 2 čistilnima odprtinama. Nadgradnja in rezervoar sta v celoti nameščena na montažnem ogrodju za Iveco Allrad 70C. Cgodpfexlkpkox Agtet

Stanje: dober (rabljeno), Fully automatic MOSCA strapping machine RO-TR 700-2 Manufacturer: Gerd Mosca GmbH Model: RO-TR700-2 PLC control Operator panel for setting operating modes, strapping intervals, strap tension Automatic PP straps, width 5, 6, 7, 8, 9 or 12 mm Codpfstzbhcox Agtsgt Operating voltage: 400 V 3AC Current consumption: 3 A Power: 2.1 kW Frequency: 50 Hz Rollers: four swivel castors, two of which are lockable Overall dimensions: approx. 1350 x 1200 x 1650 mm (W x D x H) You can find more items in other sizes - new and used - in our shop! International shipping costs on request!

Stanje: dober (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, dolžina zabojnika: 12 čevelj, Due to a change in the heating system concept at our biogas plant, we are selling this fully functional dryer. It can be inspected while in operation. Dismantling, transport, and reinstallation can be arranged upon request. Cedpevg Nwajfx Agtsgt

Stanje: pripravljen za uporabo (rabljen), Transporter za ostružke, polžasti transporter, dvojni polžasti transporter, rabljeni stroj Proizvajalec: Ventilatorenfabrik Oelde GmbH Skupne dimenzije: Širina: 9460 mm Globina: 1340 mm Višina: 2300 mm Dimenzije žleba: 8830 × 900 × 340 mm Dovodna odprtina: 1230 × 1200 mm Izhodna odprtina: 730 × 535 mm Cjdpfxey H I Uis Agtegt Električni podatki: 400 V Sistem dvojnega polžastega transporterja.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, obratovalne ure: 50 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3200 0088, skupna masa: 2.000 kg, skupna dolžina: 7.300 mm, skupna širina: 1.100 mm, skupna višina: 2.000 mm, vhodna napetost: 400 V, vhodni tok: 125 A, vrsta vhodnega toka: trifazni, vhodna frekvenca: 50 Hz, hladilna zmogljivost: 30 kW (40,79 KM), obratovalna hitrost: 83 mm/s, Manufacturer IBT.InfraBioTech GmbH Item no. 3200 0088 Technical Data Cedpfx Aownm Ukjgtsgt Condition: as new; hardly used, only for test series Functionality: fully operational Year of manufacture: 2018 Connected load: 58 kW Cooling capacity, on-site water connection: 30 kW Conveyor length: 7,000 mm Conveyor width: 310 mm Infeed height: 55 mm Infeed width: 308 mm TECHNICAL DETAILS Application: Tunnel oven for curing in film bonding technology Component temperature: max. 100°C Stainless steel housing (LxWxH): 7,300 x 1,100 x 1,680 mm Total height without control cabinet: 2,000 mm Control cabinet (WxDxH): 1,200 x 600 x 2,100 mm Stainless steel tubular frame, height-adjustable: ± 30 mm Conveyor system Vacuum silicone transport belt, 310 mm wide Transport speed: max. 5 m/min Conveyor height: 950 mm ± 30 mm Belt infeed/outfeed openings (WxH): 308 x 35 mm Clearance at belt infeed: approx. 750 mm Clearance at belt outfeed: approx. 750 mm Conveyor operation: Continuous, adjustable up to max. 5 m/min, with straight-run guiding via track rollers, light barrier safety at infeed and outfeed. Manual loading and unloading. Intended Use The curing oven is a conveyor system for continuous operation with a feed rate of max. 5 m/min. There is an open area at both infeed and outfeed for loading and unloading components. The enclosed heating section, located between, is equipped with 6 IR modules (height adjustable). The component temperature is max. 100°C and serves for heating solvent-free adhesive within a film composite. The return section of the belt, the backs of the IR modules, and the area above the heating modules are water-cooled. Components are vacuum-held on the conveyor belt. The control cabinet is located separately from the machine outside the cleanroom. The system is operated in a cleanroom in accordance with EN ISO 14644 Class 8 and is loaded and unloaded by the operator. The system is exclusively designed for the heating of film composites. Equipment - 6 adjustable infrared heating modules, each with 6 IR emitters - 6 pyrometers for precise temperature control - PU transport belt for efficient material handling - Integrated control and regulation system - Height-adjustable stainless steel support frame - Vacuum transport belt - Cooling water distribution in base frame (G1") - Water cooling for belt return and back of IR modules - Mechanically interlocked service doors - Operator panel mounted on the left side at infeed - Control cabinet cooler, water connection required on-site History This oven was intended for use in a cleanroom environment and was only sparingly used for trial runs. The oven was employed for curing solvent-free adhesives in film composite assemblies.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, We are offering a used rotary indexing table by Weiss. The rotary table features a load capacity of approx. 30 tons, a diameter of roughly 3.5 meters, and a net weight (including motor) of around 6,500 kg. The control unit for the rotary table is included as well, equipped with an SEW frequency inverter, braking resistor, etc. All documentation is available. Cedpfxsni Awpj Agtegt

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, laserska moč: 30 W, vrsta hlajenja: zrak, skupna širina: 400 mm, skupna višina: 690 mm, skupna dolžina: 600 mm, skupna masa: 45 kg, vrsta nastavitve višine: električni, dolžina območja skeniranja: 110 mm, širina območja skeniranja: 110 mm, potrebna višina: 900 mm, valovna dolžina laserja: 1.064 nm, temperatura okolja (min.): 15 °C, okoljska temperatura (maks.): 35 °C, vhodna frekvenca: 50 Hz, vrsta laserja: vlakenski laser, The LAS 22 is a compact tabletop unit with a small working area, making it ideally suited for small parts or, for example, nameplates. Due to its compact design, the machine is very practical and can be used virtually anywhere. The device is very easy to operate and requires no programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes, and logos can be created in just a few clicks, without extensive programming skills. The software automatically increments serial and item numbers after initial setup. In addition, the software can retrieve data (such as variable information like drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined fields. The use of a handheld scanner is also possible. A laptop with a Windows operating system and laser software comes as standard. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - 30-watt fiber laser (optional: 20 watts, 50 watts) - Laser class 1 - Wavelength 1064 nm - Marking field size 110 x 110 mm - Marking software EZCAD in German/English - Pilot laser (easy preview/contour preview) Cgedpfx Asy I Nbmegtjt - Focus finder (easy focusing) - Max. component height approx. 95 mm - Grid bores for fixtures - Clamping area 310 x 190 mm - Electrically adjustable Z-axis - Electric door with pinch protection - Optional: Fume extraction (incl. activated carbon filter) - Welded construction made of sheet steel - 230 V connection - Air-cooled - Laptop with Windows operating system (German or English) - Dimensions (W x D x H): 600 x 400 x 690 mm - Weight: approx. 45 kg - Low operating costs

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, hitri pomik os Y: 20 m/min, največja hitrost vretena: 60.000 obr/min, montažni premer: 3 mm, skupna širina: 800 mm, vrsta vhodnega toka: Klimatska naprava, dolžina mize: 320 mm, višina mize: 560 mm, trajanje garancije: 12 meseci, delovna širina: 560 mm, temperatura okolja (min.): 18 °C, okoljska temperatura (maks.): 30 °C, priključek za stisnjen zrak: 6 letvica, delovna dolžina: 320 mm, število osi: 3, The compact table-top version LOW MINI was specifically developed for depaneling small-format series, small quantities of large-format PCBs, and cost-conscious production. PCB materials with remaining tab connections can be quickly and economically separated up to a maximum size of 320 mm x 560 mm. The separation process is servo-controlled in all axes, with the milling spindle operating from above. The real highlight of the machine is the easy and straightforward switch of working area from small (320x280mm) to large (320x560mm) format. • Short cycle times due to shuttle operation • X-/Y-axes with linear motor technology • PCB fixation with pin technology • Flexible handling • PCBs with residual tab connections • Milling spindle adjustment with servo technology Cedpfxoxmfdxe Agtogt • Extraction unit • Easy operation • Excellent price/performance ratio Manual depaneling – flexible and cost effective The concept of manual depaneling offers significant advantages in terms of flexibility and cost. Medium batch sizes can be quickly and with minimal dust separated using the LOW MINI. The standard version features dual loading with linear motor technology; for enlarging the working area, single-shuttle operation is possible. Ease of maintenance and operation, combined with the outstanding price/performance ratio, provide a comfortable working experience, making the investment in this depaneler economically worthwhile as well. Axis speed: 160mm/s Repeatability: 0.02 mm Separation accuracy: 0.1mm Shank tools: 0.8 - 2.4mm

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 45 kg, skupna dolžina: 350 mm, skupna širina: 605 mm, skupna višina: 1.080 mm, vhodna napetost: 230 V, laserska moč: 20 W, valovna dolžina laserja: 1.064 nm, dolžina območja skeniranja: 70 mm, širina območja skeniranja: 70 mm, vrsta vhodnega toka: Klimatska naprava, vrsta laserja: vlakenski laser, The mobile LAS 23 portable laser is distinguished by its compact design. Small, handy, and equipped with custom-made attachments that can be individually exchanged via a quick-change system. Thanks to its mobile base frame, it can be moved directly to the workpieces to be marked. This makes it suitable for both large, heavy, and small workpieces. The powerful laser software enables text, numbers, 2D codes, QR codes, and logos to be created with just a few clicks, without extensive programming knowledge. Serial and article numbers can be automatically incremented by the software after prior configuration. Additionally, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined areas. The use of a hand scanner is also possible. Made in Germany • Fiber laser 20W (optional: 30 watt, 50 watt) • Laser class 1 • CE compliant, according to EU directives • Wavelength 1064nm • Marking field size 70x70mm (optional: 110x110mm) • Signal light for operating status (on handheld unit) • Marking software: EZCAD • Power connection: 230V Cgsdpfou Smcbjx Agtet • Air-cooled • Laptop with Windows operating system • Dimensions: 350 x 605 x 1080mm (LxWxH) • Weight: approx. 40 kg • Weight of portable laser unit (handheld): 2.8 kg • Fiber optic cable approx. 2.50 m • Integrated extraction system

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, laserska moč: 30 W, vrsta hlajenja: zrak, skupna širina: 1.500 mm, skupna višina: 2.050 mm, skupna dolžina: 900 mm, skupna masa: 120 kg, vrsta nastavitve višine: električni, širina odprtine vrat: 700 mm, višina odprtine vrat: 400 mm, dolžina območja skeniranja: 150 mm, širina območja skeniranja: 150 mm, potrebna širina: 1.550 mm, potrebna višina: 2.100 mm, valovna dolžina laserja: 1.064 nm, vhodna frekvenca: 50 Hz, The universally applicable LAS 28 XLe laser marking system by Systemtechnik Hölzer GmbH is designed for a wide range of marking applications. Thanks to its integrated fiber laser, you can mark nearly all materials, including steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. In many industries, utilizing a laser for permanent marking has become indispensable. The powerful laser software enables easy creation of texts, numbers, 2D codes, QR codes, and logos with just a few clicks—no advanced programming knowledge required. The software can automatically increment serial and article numbers as preset. In addition, it can import data (such as drawing numbers, project labels, etc.) from existing tables and automatically transfer them to predefined fields. The use of a hand scanner is also supported. Standard features include an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe model can be outfitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side extensions for marking long parts, motorized Z-axis, drawer systems, etc., are available. Cgsdpfx Agsrxrrhstot Made in Germany Fiber laser 30W, 20W, or 50W • Laser class 1 • Wavelength: 1064 nm • Marking field size: 150 x 150 mm (larger sizes optional) • Signal lamp indicating operational status • Options: rotary axis (3-jaw chuck) • Options: extraction unit (including activated carbon filter) • Options: digital height measuring system • Options: autofocus system for automatic focus adjustment • EZCAD marking software in German/English (other software available on request) • Pilot laser (easy preview, plain text preview) • Focus finder (simple focus adjustment) • Max. component height: approx. 300 mm • Electrically adjustable Z-axis • Integrated PC running Windows • Height-adjustable monitor and keyboard mount • Frame made of aluminum profiles • Air-cooled • Door width: approx. 700 mm / Door height (pass-through): approx. 400 mm • Power supply: 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with monitor mount: approx. 1500 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg