Infrardeča pečica za strjevanje filmskih kompozitov

IBT Infra Bio Tech GmbH Infrarot Aushärteofen

Manufacturer
IBT.InfraBioTech GmbH
Item no. 3200 0088

Technical Data
Condition: as new; hardly used, only for test series
Functionality: fully operational
Year of manufacture: 2018
Connected load: 58 kW
Cooling capacity, on-site water connection: 30 kW
Conveyor length: 7,000 mm
Conveyor width: 310 mm
Infeed height: 55 mm
Infeed width: 308 mm

TECHNICAL DETAILS
Application: Tunnel oven for curing in film bonding technology
Component temperature: max. 100°C
Stainless steel housing (LxWxH): 7,300 x 1,100 x 1,680 mm
Total height without control cabinet: 2,000 mm
Control cabinet (WxDxH): 1,200 x 600 x 2,100 mm
Stainless steel tubular frame, height-adjustable: ± 30 mm

Conveyor system
Vacuum silicone transport belt, 310 mm wide
Transport speed: max. 5 m/min
Conveyor height: 950 mm ± 30 mm
Belt infeed/outfeed openings (WxH): 308 x 35 mm
Clearance at belt infeed: approx. 750 mm
Clearance at belt outfeed: approx. 750 mm

Conveyor operation:
Continuous, adjustable up to max. 5 m/min, with straight-run guiding via track rollers, light barrier safety at infeed and outfeed. Manual loading and unloading.

Intended Use
The curing oven is a conveyor system for continuous operation with a feed rate of max. 5 m/min. There is an open area at both infeed and outfeed for loading and unloading components. The enclosed heating section, located between, is equipped with 6 IR modules (height adjustable). The component temperature is max. 100°C and serves for heating solvent-free adhesive within a film composite. The return section of the belt, the backs of the IR modules, and the area above the heating modules are water-cooled. Components are vacuum-held on the conveyor belt. The control cabinet is located separately from the machine outside the cleanroom.

The system is operated in a cleanroom in accordance with EN ISO 14644 Class 8 and is loaded and unloaded by the operator. The system is exclusively designed for the heating of film composites.

Equipment
- 6 adjustable infrared heating modules, each with 6 IR emitters
- 6 pyrometers for precise temperature control
Nwedpfownm Ukex Abtop
- PU transport belt for efficient material handling
- Integrated control and regulation system
- Height-adjustable stainless steel support frame
- Vacuum transport belt
- Cooling water distribution in base frame (G1")
- Water cooling for belt return and back of IR modules
- Mechanically interlocked service doors
- Operator panel mounted on the left side at infeed
- Control cabinet cooler, water connection required on-site

History
This oven was intended for use in a cleanroom environment and was only sparingly used for trial runs. The oven was employed for curing solvent-free adhesives in film composite assemblies.

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.