Unbekannt Kardanski Zglob Za Prečni Prehod Žerjava nakup rabljenega (85.404)

Stanje: dober (rabljeno), Adjustable spreader beam, crane lifting beam, overhead crane, crane hook beam, load lifting beam, heavy-duty spreader beam, centerpiece for crane beam - Universal joint: for crane beam .: 1045 2761 G-12-02-02 - Mounting: Ø 60 mm, hole spacing 220 mm - Dimensions: see photos - Quantity: 4 units available - Price: per unit - Transport dimensions: 350/140/H140 mm Dodpfsv Hnagex Aplocg - Weight: 16.7 kg/unit

Stanje: dober (rabljeno), Central component for lifting beam, adjustable spreader beam, crane beam, overhead crane, crane hook beam, load spreader, heavy-duty spreader. - Central component: for crane beam, top traverse plate Part No.: 1031 4140 G-12-02-02 - Dimensions: see photos - Quantity: 2 pieces available - Price: per piece Dedpfx Apov Hm Szelecg - Shipping dimensions: 350/180/H310 mm - Weight: 17.7 kg/each

Stanje: rabljeno, Leto izdelave: 2001, Wood processing dimensions: Infeed lengths min/max: 500 - 6500 mm Full optimization up to max: 1500 mm Infeed widths min/max: 40 - 300 mm Infeed thicknesses min/max: 15 - 120 mm Max. wood cross-sections: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw min: 510 – 2800 mm Special application: Cutting blocks, min/max length: 100 – 200 mm (Note: Multiple block lengths during sorting; blocks are conveyed to the end of the sorting line and fall into customer-supplied mesh boxes) Cutting/trim tolerance: +/- 0.8 – 1.5 mm (depending on timber quality with minimal resin content and uniform surface. Tolerance up to 1 m fixed length; maximum tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm Wood curvature in all directions: max. 10 mm per meter length Dodpfx Aow Sy T Hsplscg Wood species: Softwood or hardwood System performance: Feed speed, steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 s To determine actual daily output, an efficiency factor dependent on the customer’s production conditions must be applied. Working height infeed and saw: 900 mm (to be placed on customer-side platform; saw requires concrete base) Sorting working height: 2000 mm Connection data: Total electrical connection load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Voltage fluctuations max. 5 % Air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Support roller without drive, front-facing sheets table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera to detect error markings Pos. 4: Automatic, contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with integrated waste chute, incl. equipment package for large wood cross-sections Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and system control Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor belt as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on outfeed conveyor Location: Nattheim

Stanje: novo, Leto izdelave: 2025, Cutting height at 90°: 200 mm Cutting height at 45°: 140 mm Cutting width at 90°: 420 mm Dedpjiy Ry Aefx Aplocg Cutting width at 45°: 295 mm Mitre range, horizontal: 45° - 90° - 25° Mitre range, vertical: 60° - 90° - 30° Saw blade diameter: 520 mm Speed: 2,800 rpm Motor power: 5 kW Motor brake: yes Extraction port: 100 mm Weight: 490 kg

Stanje: novo, Leto izdelave: 2025, TRV 2200: The Perfect Optimizer for Companies Seeking to Stay Competitive The TRV 2200 is the most produced optimizer with the best price-performance ratio in its class, engineered to radically transform production cycles for businesses. Here’s why it’s the ideal choice for those seeking superior performance, reliability, and innovation: Unbeatable speed: With a speed limited to 300 ml/min, the TRV 2200 ensures fast and smooth workflows, guaranteeing consistent efficiency. Maximum precision: Ideally suited for cutting finished profiles, it delivers precision that meets even the most demanding requirements. Modular design: Its modular structure enables customization that adapts perfectly to every company’s needs, optimizing space and production processes. Comprehensive features: Equipped with a wide range of accessories for every need, it offers unmatched versatility. Outstanding across industries: Whether for furniture, construction, or wood processing, the TRV 2200 is a proven key to success. Global efficiency and industry-leading performance Cut, optimize, and revolutionize your production processes: The TRV 2200 is already the preferred choice for companies worldwide, who purchase it in series to increase their competitiveness. This is possible thanks to minimal maintenance requirements, achieved by eliminating dynamic components and passive transmissions, and a robust, reliable structure that ensures long-lasting results. Advanced software capabilities: - Over 100 custom cutting plans: widths, quality, and various options for process optimization - Optimization choice among different modes: commercial value, waste, quantity, length, and mixed optimization - Optimization simulation to predict results before production - Precise control of processed quantities for continuous monitoring of efficiency - Internal optimization within the machine body, simplifying the process and reclaiming valuable space High-quality cutting unit: - Proven conveyor belt system without sticking parts, combined with rubberized, anti-slip pressure rollers for universal use on various materials - Highest cutting precision, even on wet and warped boards, thanks to the use of durable materials guaranteeing constant speed and quality Application sectors where the TRV 2200 excels: - Semi-finished furniture components - Parquet flooring - Windows and doors Dedpfsv Iqdqex Aplocg - Laminated boards, strips, and structures - Doors, frames, baseboards, and construction Don’t miss the opportunity to discover how the TRV 2200 can transform your production cycle. Watch the video to see its exceptional performance in action!

Stanje: novo, Leto izdelave: 2024, Customizable Saw: The Ideal Solution for Small and Medium Cross-Sections Complete optimization, high precision, and maximum speed in a single tool The TRV 1200 is the perfect saw to master the daily challenges of processing individual boards, whether raw or painted. With its advanced technology, this ultra-fast and efficient cutting system enables optimization of every operation—stress-free for the operators. Designed for small or medium cross-sections, the TRV 1200 meets all your requirements, delivering a continuous work cycle that ensures flawless performance. Intelligent operation and full automation With the innovative touchscreen, you can easily upload cutting lists directly from the device or remotely from your office. Once you select the desired optimization, the system independently manages all subsequent steps, including: - Material feeding (*see Cursal accessories) - Automatic feed and positioning - Instant data transfer to the CNC and optimization - Ejection of processed parts - Selection of quality, width, and length (*see Cursal accessories) Maximum speed and precision without compromise The TRV 1200 achieves outstanding speed: 195 m/min, self-limited by the brushless servomotor. The synergy of a powerful optimizer, indestructible machine structure, and precise table control guarantees perfect results. CNC-controlled motorized belts and pneumatic pressure rollers ensure accurate material positioning. Complete versatility for any type of machining Dcjdpfxev Ip Uzs Apleg The TRV 1200 adapts seamlessly to various applications, from recovery work and flaw correction to more complex operations requiring advanced software processing. It is the ideal partner to optimize every phase of your process and achieve maximum results with minimal waste. Advanced and user-friendly programming software - Over 100 predefined cutting patterns: customizable widths, qualities, and cutting specifications - Various optimization options: for commercial value, for waste reduction, for quantity, for length, and mixed optimization - Optimization simulation to ensure the best material management - Continuous monitoring of processed quantities - Internal optimization within the machine body streamlines the process and saves valuable space Advanced numerical control for efficient management At the heart of the TRV 1200 is the powerful CNC—an industrial computer that guarantees uninterrupted, continuous production. With the HD touchscreen, you can easily import data via USB and access software that is intuitive yet high-performance. The system is quick to learn and easy to operate. Additionally, you benefit from online remote support for real-time troubleshooting. Discover how the TRV 1200 can transform your production: speed, precision, and optimization at the touch of a button.

Stanje: dober (rabljeno), Daljinsko upravljanje žerjava, radijski sprejemnik, sprejemnik, radijsko daljinsko upravljanje za žerjav, sistem radijskega upravljanja, upravljanje žerjava, radijski oddajnik, daljinsko upravljanje. Dedpfsy Ndrvox Aplocg -Proizvajalec: ABUS, radijsko daljinsko upravljanje z oddajnikom in sprejemnikom za upravljanje žerjava -Tip: ABURemote AR611 -Obseg dobave: po slikah, vtič/ priključni kabel (brez daljinskega upravljalnika). -Dimenzije: 570/510/V180 mm -Teža: 5,5 kg

Stanje: dober (rabljeno), Leto izdelave: 1999, Holtec cross conveyor with infeed hopper. 7 chain strands. Width: 15.50 m. Conveyor length: 5.0 m. Chain spacings: 3.75 - 4.0 - 2.4 - 1.8 - 1.5 - 1.35 m. Robust chains, 125 x 60 x 8 mm. Driven by SEW geared brake motor. Dcsdpferdd I Uex Aplog

Stanje: dober (rabljeno), Leto izdelave: 1992, I am selling an automatic pneumatic cross-cut saw, GreCon Dimter 2004, year of manufacture 1992. Automatic infeed table / through-feed system Outfeed table 3 ejectors on the left outfeed table Total length: 15.50 m Optimization with automatic defect detection and automatic cut pattern programming. Dcjdpfxet Ir Nqe Apljg Available immediately. Spare parts and documentation included.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, dvižna višina: 10.000 mm, nosilnost: 5.000 kg, DEMAG enotirna vozička z dvižnim mehanizmom DH312 H12 4/1 Djdpsyyulzsfx Aplecg i=65 Nosilnost 5000 kg V dobrem, rabljenem stanju

Stanje: dober (rabljeno), številka stroja/vozila: 1161020, Leto izdelave: 2016, Width: 3,000 mm, Front dimension: 135 mm, Load capacity: 3,000 kg Dedjt A A Igspfx Aplocg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 6400 x 1500 x 1780 mm Total Power Requirement: 19 kW Weight: 1800 kg Optimizing Cross-Cut Saw WINTER QUICK 100 NC - Minimum workpiece length: 300 mm - Minimum / maximum workpiece width: 20–220 mm - Minimum / maximum workpiece thickness: 15–100 mm - Workpiece thickness tolerance: ±3 mm - Max. tolerance per side of workpiece: 10 mm/m - Wood type: soft or hard - Minimum trimming length: 80 mm - Max. feed speed: 180 m/min - Cutting speed: 0.15–0.3 s - Total power: 19.0 kW - Saw motor: 7.5 kW - Feed servomotor: 5.5 kW - Saw stroke servomotor: 4.5 kW - Conveyor belt motor: 0.75 kW - Beam lift motor: 0.37 kW - Extraction diameter: 2 × Ø120 mm - Table height: 900 mm - Overall dimensions: L=6400 mm, W=1500 mm, H=1780 mm - Weight: 1800 kg Standard Features: - Infeed and marking station with servo drive - Infeed conveyor and saw stroke each with individual servo drive - 2.5 m discharge conveyor with fluorescence sensor and ejector - Saw blade with integrated scrap air nozzle - User-friendly 10.1'' TFT touchscreen - Air tank for stable pressing force - Powerful servomotor - Fully enclosed safety guard for quiet and safe operation - Efficient production—can replace 4–8 sets of conventional manual cross-cut saws - Saves labor and floor space - Safe operation - Can be combined with a high-speed four-side planer to form an efficient, automatic production line. Dsdpfswt Ua Esx Aplocg

Stanje: rabljeno, Crane motor, travel drive for crane bridge with gearbox Slip ring motor, three-phase AC motor, brake motor, Crane motor, wire rope hoist drive, crane drive, hoisting motor, fine hoist motor Manufacturer: DEMAG Motor type: 24/10 KF8-2 Motor no.: 982869 Motor design: B5 Rated voltage: 380 VAC Rated frequency: 50 Hz Power stage 1: 0.58 kW = 715 rpm Power stage 2: 2.3 kW = 2900 rpm with DEMAG gearbox type KS 12 Reduction gearbox Serial no. 1909104 Gear ratio: i = 118 with running wheel for crane runway rail Dcjdpfx Apsptlbloljg 2 units available, price per piece

Stanje: rabljeno, Circular saw blade diameter: 500 mm Max. cutting height: 120 mm Motor power: 5.5/7.5 kW Working length: 4100 mm Salvapush 2000 optimizing cross-cut saw For complete wood optimization and defect cutting Version 4100 (working length) ----- Technical specifications: - Cutting range: min. 30x12 mm, max. 270x120 / 300x95 mm. Optional special cutting ranges on request. - Plate length before cutting: min. 500 mm, max. 4100 / 5100 / 6100 mm, depending on version Dodpfxjwhf Ipj Aplecg - Possibility of a single cut in the last 40 mm of the board. Minimum final trim length: 5 mm. - Maximum wood weight: 120 kg (optional special solution on request) - Feed with pusher, directly controlled by an innovative computer-controlled and servo-driven system, digitally connected via EtherCAT. - Special working table inclined at 25 degrees for easy loading and to hold the workpiece securely clamped - Double steel frame construction, highly robust, reinforced and painted. - Special rear safety locking device for appropriate occupational safety. Pusher speed up to 60 m/min in compliance with current safety regulations: Carriage travel speed can be set directly from the computer depending on cutting area. Faster version optionally available. - Very sturdy pusher carriage: extended dimensions approx. 300x345x25 mm. - The aluminum support is large and solid: height 135 mm, width 120 mm. - Special transmission system with 50 mm wide toothed belt with 33 hardened steel bands inside, ensuring high precision and performance - Electronic brushless servo motor with constant torque and digital EtherCAT connection - Photoelectric laser cell for wood detection, and a luminescence reader for fluorescent markings. System is fixed-position, eliminating manual adjustments when wood thickness changes. - Electronic operating system S-OPTIM - Complete management of up to 5 cutting grades - Robust discharge table for collecting the cut workpieces, made of hard steel, length 3000 mm. Inclined at 25 degrees, same as rest of the conveyor, and complete with guide ----- Price of the machine as listed: on request! ----- Optional extras (at surcharge): - Extended discharge (outfeed) table - Gravity preloading system - Zebra label printer - Saw motor upgrade from 5.5 kW to 7.5 kW - Extension of cutting range to 140x240 – 100x300 with circular saw blade diameter 550 mm - Horizontal side discharge - Wide pusher plate Optional alternatives to discharge (outfeed) table: - Version TT: rotary discharge table for full discharge of all cut parts in one cycle - Floor flap for discharge table with rotary function to remove end pieces from trimmed lumber - Version LS: electronic sorting unit For sorting cut pieces by size and grade with 3 high-speed ejectors ----- Prices for the above options: on request! ----- (Technical data as per manufacturer's specifications – subject to change without notice!)

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 1500 kg Total power requirement 10.2 kW Fully-automated optimizing cross-cut saw with full optimization TR-600 MATRIX-6000 - Motor drive power 9.2 kW - Saw blade diameter 600 x 30 mm Z=60 - Cutting capacity according to cutting diagram - Cutting capacity 150 x 365 mm - Cutting capacity 130 x 440 mm - Cutting capacity 100 x 530 mm - Cutting capacity 60 x 580 mm - Cutting capacity 30 x 610 mm - Cutting cycle 6 seconds - Hydraulic cross-cut unit - Work table inclined by 8° - Minimum workpiece thickness 10 mm - Safety cover over cross-cutting unit - CE standard - Weight 1500 kg Electrical specifications: - Supply voltage 400 V / 50 Hz - Control voltage 24 V - Extraction ports 4 x diameter 100 mm - Extraction capacity 2400 m³/h - Air speed at center of extraction port approx. 25–35 m/s Electronically controlled pusher: - Feeding length: 6000 mm - Max. pusher speed 90 m/min - Driven by brushless servomotor - Feed system with precision rack and pinion, length measurement via servomotor - Pneumatic pusher lift at cycle end and overhead return - Photocell for workpiece length measurement - Photocell for defect detection - Marking with fluorescent chalk - Work surface inclination 8° - Positioning tolerance +/- 0.4 mm Control system: - High-resolution 12" touchscreen monitor (800 x 600 px) - Create cutting lists directly on the machine control - Up to 1,000 cutting lists with 10 dimensions each - Single list with 10,000 dimensions in sequence - 3 optimization options (maximum length, sequence, workpiece sequence) - 3 optimization options (volume, minimal waste, priority) - Standard with USB and Ethernet interface - Includes OPTI function for automatic measurement of the workpiece to be cut. Optimal for processing variable-length material, for single or bundle feeding. - 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimal waste, and priority) - Includes OPTI PLUS function for reading markings, enabling full optimization and removal of knots and defects. - Marking with chalk Options: - Pneumatic side clamp €850.00 - Creating cutting lists on PC €360.00 - Outfeed table €360.00/m Dcodjv A Htkspfx Apljg

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 0 x 0 x 0 mm Weight: 1000 kg Total power requirement: 8.5 kW Fully Automatic Optimizing Cross-Cut Saw with Full Optimization TR-500 MATRIX-6000 - Main motor power: 7.5 kW - Saw blade diameter: 500 x 30 mm, Z=144 - Cutting capacity according to cutting diagram - Cutting capacity: 135 x 280 mm - Cutting capacity: 125 x 295 mm - Cutting capacity: 95 x 325 mm - Cutting capacity: 80 x 340 mm - Cutting capacity: 55 x 360 mm - Cutting cycle: 4 s - Pneumatic cross-cutting unit - Worktable inclined by 8° - Minimum workpiece thickness: 10 mm - Safety cover over cross-cutting unit - CE compliant - Weight: 1000 kg Electrical specifications: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction outlets: 4 x Ø 100 mm - Extraction capacity: 2400 m³/h - Air consumption per cycle: 4 Nl - Extraction air velocity at the nozzle center: approx. 25–35 m/s Electronically controlled pusher: - Infeed length: 6000 mm - Pusher speed: 90 m/min - Driven by brushless servomotor - Feed system with precision rack and servomotor-based measurement - Pneumatic lifting of the pusher at cycle end and overhead return - Photocell workpiece length measurement - Photocell defect detection - Fluorescent chalk marking Dcjdpsv A Htdjfx Apljg - Worktable inclination: 8° - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12” touchscreen monitor (800 x 600 pixels) - Creation of cutting lists directly at the machine control - Up to 1000 cutting lists with 10 dimensions each - Single list with up to 10,000 dimensions in sequence - 3 optimization modes (maximum length, sequence, and workpiece sequence) - 3 optimization modes (volume, minimal waste, and priority) - Standard USB and Ethernet interface - Includes OPTI function for automatic measurement of workpieces to be cut. Optimal solution for processing variable length material with single or bundle feeding - 6 optimization modes (maximum length, sequence, workpiece sequence, volume, minimal waste, and priority) - Includes OPTI PLUS function for detecting markings, thereby enabling full optimization and removal of knots and defects - Marking with chalk Options: - Pneumatic side clamp: €850.00 - Creation of cutting lists on PC: €360.00 - Outfeed table: €360.00/m

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 0 x 0 x 0 mm Weight: 900 kg Total power requirement: 5 kW Fully optimizing automatic crosscut saw TR-450 MATRIX-6000 - Drive motor power: 4.0 kW - Saw blade diameter: 450 x 30 mm Z=72 - Cutting capacity according to cutting diagram - Cutting capacity: 95 x 265 mm - Cutting capacity: 85 x 277 mm - Cutting capacity: 60 x 290 mm - Cutting capacity: 40 x 310 mm - Cutting capacity: 25 x 330 mm - Cutting cycle: 4 seconds - Pneumatic crosscutting unit - Inclined worktable at 8° - Minimum workpiece thickness: 10 mm - Safety cover over crosscutting unit - CE compliant - Weight: 900 kg Electrical connection: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction ports: 2 x 100 mm diameter - Extraction performance: 2400 m³/h - Air consumption per cycle: 6 Nl - Air velocity at extraction port center: approx. 25–35 m/s Electronically controlled pusher: - Feed length: 6000 mm - Pusher speed: 90 m/min - Driven by brushless servo motor - Feed system with precision rack and mass measuring via servo motor - Pneumatic pusher lift at cycle end and overhead return - Photocell for workpiece length measurement - Photocell for defect detection - Marking with fluorescent chalk - Work surface inclination: 8° - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12" touchscreen monitor (800 x 600 pixels) - Creation of cutting lists directly on machine control - Up to 1000 cutting lists with 10 dimensions each - Single list with up to 10,000 dimensions in sequence - Three optimization options (maximum length, sequence, part sequence) - Three optimization options (volume, minimal waste, priority) - USB and Ethernet ports as standard - Includes OPTI function for automatic measurement of the workpiece to be cut. Ideal solution for processing material with varying lengths, with single or bundle feeding. Six optimization options (maximum length, sequence, part sequence, volume, minimal waste, priority). - Includes OPTI PLUS function for detection of markings, ensuring full optimization and removal of knots and defects. - Marking with chalk Dodpfev A Hr Tex Apljcg Options: - Pneumatic side clamp: €850.00 - Creating cutting lists via PC: €360.00 - Outfeed table: €360.00/m

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 4500 x 1200 x 1200 mm Weight: 1,500 kg Total power requirement: 8 kW Optimisation Crosscut Saw WS1 - Cutting height Position A: 130x175, 120x200, 100x230, 85x250, 50x280, 15x305 mm Position B: 100x290, 80x315, 50x340, 30x355, 15x365 mm - Cutting speed: up to 100 cycles/min - Feed speed: 120 m/min - Motor power: 7.5 kW - Voltage: 400 V / 50 Hz - Saw blade diameter: 500 mm, bore 30 mm - Speed: 3,600 rpm Dedsvz Hz Eepfx Apljcg - Min. workpiece length: 550 mm - Min. workpiece width: 40 mm - Min. workpiece height: 15 mm - Cutting accuracy: +/- 0.8 mm - Infeed roller conveyor right: 2,000 mm with double marking station - Outfeed table left: 1,000 mm - Extraction connection diameter: 200 mm - Air consumption: 20 NL/cycle - Operating pressure: 6 bar - Working height: 930 mm - PLC control with 7'' colour touch screen for easy operation + fixed-length crosscut mode + sequential crosscut mode (10 different dimensions can be saved) + crosscutting of marked chalk lines + fixed-length and marked chalk line crosscutting - CE conformity - Dimensions: L=4500, W=1200, H=1200 mm - Weight: 1,500 kg

Stanje: novo, Leto izdelave: 2025, Maße (Länge/Breite/Höhe) 3000x1070x1200 mm Gewicht 1150 kg Gesamtleistungsbedarf 10 kW Optimierungskappsäge OPTIMAX 100 - Sägemotor 7,5 kW - Drehzahl 3200 U/min. - Vorschubmotor 2,0 kW Dcjdpfevz Hzxox Apleg - Vorschubgeschwindigkeit stufenlos regelbar bis max. 80 m/min. - Schnittgeschwindigkeit bis zu 80 Takte/min. - Sägeblatt Ø 455 mm - Sägeblattbohrung 30 mm - Schnitthöhe 100 mm (gemäß Schnittdiagramm) - hohe Schnittgenauigkeit +- 1 mm - min. Werkstücklänge 300 mm - min. Abstand zwischen der Markierung 20 mm - min. Werkstückgröße 300 x 30 x 10 mm - PLC Steuerung mit Touch-Screen für einfache Bedienung + Kappschnitt Fix-Längen-Modus + Sequentieller Kapp-Modus (10 verschiedene Maße speicherbar) + Kappschnitt von markierten Kreidestrichen + Kappschnitt Fix-Längen und von markierten Kreidestrichen - Einlauf-Rollentisch rechts 1200 mm - Auslauftisch links 1000 mm - Druckluftanschluss 8 bar - CE Konformität - Abmessungen L=3000, B=1070, H=1200 mm - Gewicht 1150 kg

Stanje: dober (rabljeno), Your contacts in our company: Mr. Andre Evering Dcedpfxofq Du Ds Apleg Mr. Mario Klöver Mr. Simon Blank We offer you here a used pallet rack beam from the manufacturer Vogelsang for purchase. Technical data for the pallet rack beam: Manufacturer: Vogelsang Type: NS Scope of delivery includes: 01x pallet rack beam, used Material color: orange Box section: 110 x 50 mm Clear span: 2,700 mm Max. load per pair of beams: 2,700 kg with evenly distributed load 02x safety pins, used Version: fully galvanized For securing the beams against accidental removal Our range of services at a glance: (Prices on request) Assembly, installation Please observe our general assembly terms and conditions Rack inspection Rack inspection according to DIN EN 15635, performed in compliance with BGR 234 visual inspection requirements for all rack systems Delivery by our own fleet (unloading not included)

Stanje: novo, Cross-cut and Mitre Circular Saw GRAULE ZS 85 N Dcodpfxsu R Sycs Apljg - Tiltable - Includes: - Cross-cut and mitre circular saw GRAULE ZS 85 N - tiltable - Material positioning shoulder made of laminated wood - without machine stand and saw blade - Includes: - GRAULE machine stand suitable for model ZS 85 N up to ZS 170 Includes: - GRAULE feed roller conveyor type RO complete with support legs and connection brackets Ball-bearing plastic rollers, Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support legs for conveyor height 885 +/- 10 mm Includes: - GRAULE roller conveyor / length stop, type RLK with scale and rear-folding material stop. Ball-bearing plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support legs for conveyor height 885 +/- 10 mm - New exhibition machine -

Stanje: novo, Crosscut and Mitre Circular Saw GRAULE ZS 170 N - tiltable - Included: - Crosscut and Mitre Circular Saw GRAULE ZS 170 N - tiltable - - without machine stand and saw blade - Included: - Machine Stand GRAULE for type ZS 135 N and ZS 170 N Included: Dcsdpfx Apsu R Sypsleg - Infeed Roller Conveyor GRAULE type RO complete with support legs and connecting angle Ball-bearing plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support legs for roller conveyor height 885 +/- 10 mm Included: - Roller Conveyor/Length Stop GRAULE type RLK with scale and material stop foldable to the rear. Ball-bearing plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support legs for roller conveyor height 885 +/- 10 mm - new showroom machine -

Stanje: rabljeno, Podvozje z trenjskim pogonom za lahki žerjavni sistem DEMAG primerno za žerjavne tirnice iz sistemskih profilov tipa KBK 2 in KBK II L Tip: DRF 200-B14-1-43 Tovarniška št.: 45950995 Hitrost vožnje: ca. 40 m/min = 0,67 m/sek Moč motorja: 0,37 kW Priklop na omrežje: 400 V, 50 Hz - Pogonski motor DEMAG, tip ZBA 71 A2 B007 Voziček KBK 2 / KBK2L za obešanje v žerjavno tirnico Premer koles: 82 mm Dcsdpfx Apsw Nxyyjlsg Širina koles: 21 mm Širina vozička: 78 mm Potrebni prostor D x Š x V: 410 x 320 x 470 mm Teža: 28 kg V dobrem stanju

Leto izdelave: 2000, stanje: rabljeno, Load turning device, load turning beam, load turning mechanism, lifting beam, adjustable lifting beam, crane beam, beam for column slewing crane, overhead crane, workstation crane, chain hoist Dcjdog Dvyuepfx Apljg -Manufacturer: GT-Hebetechnik, crane beam for transporting various types of loads -Lifting capacity: 8,000 kg -Hook spacing: min. 1,000 mm / max. 2,500 mm -Steel wire rope: Ø 22 mm, length 1,600 mm -Overall dimensions: 2,620/360/H890 mm -Dead weight: 304 kg

Stanje: rabljeno, Load turning device, load turning beam, load turning apparatus, lifting beam, adjustable lifting beam, crane beam, beam for column slewing crane, indoor crane, workstation crane, chain hoist Djdpog Dvyqefx Aplscg - Crane beam: adjustable, suitable for transporting various loads - Load capacity: 6,500 kg - Hook spacing: min. 1,460 mm / max. 2,880 mm - Steel cable: Ø 22 mm, length 1,580 mm - Overall dimensions: 3,025/190/H945 mm - Dead weight: 230 kg