GRAULE ZS 85 N žaga za prečni in poševni rez - nagibna -

Abläng- und Gehrungskreissäge GRAULE ZS 85 N

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), številka stroja/vozila: MBHF-KBK1, DEMAG KBK overhead crane system, crane runway dimensions approx. 12m x 3.5m Other dimensions available upon request! Load capacity / lifting capacity: 125 kg (0.125 t) Technical specifications of the system: Nwedopiarnopfx Anzok Crane runway made of Demag KBK1 rails System will be delivered complete: KBK rails, rail connectors, trolleys, end plates, cable festoon system, power supply, brackets/suspenders, etc. Incl. 1 bridge with 125 kg Demag DC-COM chain hoist Crane is dismantled and available immediately Very good used condition, see pictures Item location: 75053 Gondelsheim Shipping by freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems with load capacities from 125 kg to 1600 kg are also available. Please enquire about your crane runway with required cantilever load and dimensions.

Leto izdelave: 2024, stanje: novo, Voziček za prevoz in shranjevanje profilov v navpičnem položaju COMALL CARR 300 Q, nov Tehnične specifikacije: - 10 prekatov z delovno velikostjo 128 mm - Stične površine prevlečene z neopraskajočim in udarnoodpornim plastičnim materialom - 4 kolesa Ø 125 mm, od tega 2 z zavoro Nwedpef Nk H Hsfx Anzek - Roke nastavljive v 5 različnih položajev - Podporna miza prevlečena z gumo - Nosilnost: 650 kg

Stanje: novo, Vacuum Lifter BARBARIC B3, Swivelling, incl. Crane - Demonstration Unit - Includes: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg For vertical and horizontal transport of flat, standard panels (coated panels, natural wood panels) up to a panel size of 3,000 x 2,100 mm - Tilt range of 90° with pneumatic tilting device - Complete unit with hoist and corresponding safety devices (vacuum gauge and hand slide valve with mechanical safety lock) - uniWood crossbeam with 2 suction pads Ø 270 mm on an adjustable traverse (Traverse length: 1,500 mm) Includes: - Option: Reinforced version BARBARIC uniWood for slightly porous panels Load capacity: 250 kg Nodpfxeu R Szas Anzewk With 2 oval suction pads 500 x 250 mm on an adjustable traverse (Traverse length: 1,250 mm) and reinforced vacuum pump for porous panels. The reinforced version allows lifting of materials up to 250 kg. Includes: - Option: Comfort operation BARBARIC uniWood All controls for the hoist and vacuum lifter are integrated in a single control unit – our special handling grip. This enables operation of the system and load guidance in single-hand mode. The lifting process can be infinitely controlled via frequency converter. The comfort version is supplied complete with hoist and corresponding safety devices (vacuum gauge and 2-button safety release control). Includes: - Column-mounted slewing crane BARBARIC Load capacity on the lifting device: 250 kg The indicated load capacity refers to the usable load on the lifting device. Barbaric slewing cranes are designed for handling tasks in all application areas and are extremely lightweight in construction. SSK consists of column, bracket, and smooth-running jib. Swivelling and trolley movement by hand. The prerequisite for installation is a proven concrete floor (C20/R5, min. 20 cm thick). Static verification of the floor must be carried out and documented by the customer. For fixing on cracked concrete or weak substrates, oversized base plates are available on request. Mounting: Supplied with adhesive anchors for concrete floors. If ordering without hoist, please specify the required cable or hose arrangement! Delivery includes: manual trolley, energy supply, and compressed air connection. - New demonstration machine -

Stanje: novo, Leto izdelave: 2025, Modern, high-performance and universal double mitre saw for wood, aluminium and PVC profiles. Nwsdpfxjxta Tuo Anzsk Stock machine: Subject to prior sale - Large cutting capacity (165 mm cutting depth at the table) - Double cuts possible - Intermediate angles can be steplessly fixed - Pneumatic tilting as standard - Hydropneumatic saw feed, infinitely adjustable - Torsion-resistant machine bed - Tilting range for both units: 22.5° inwards, 90°, 135° outwards - Precision-ground saw table / saw bed plate - Direct position measurement system (magnetic sensor) in all models - JETTER drives and control systems - 15" industrial touch panel (IP65)

Stanje: novo, Naprava za pritrditev steklenih letvic "2 P Jumbo automatic E.C." - nova - Vaše prednosti: - Kotni spoje je mogoče zapreti - Ni odprtih razpok na steklenih letvicah - Med lakiranjem ni barvnih razlik - Okvire steklenih letvic je enostavno razporediti Stroj za kotne spoje s sponkami 2P Jumbo Automatic E.C. za pritrditev okvirjev steklenih letvic s sponkami. Možnost izbire med avtomatskim in ročnim načinom delovanja; Z nastavljivim kotom, pritrdilno napravo od zgoraj in spredaj Pritisk je mogoče ločeno nastaviti. Možnost uporabe vzporednih in prekritih sponk s pomočjo elektronske programirljive krmilne enote. Napravo za sponke je mogoče namestiti na primerno delovno mizo, upravljanje s pomočjo nožnega pedala. ----- Cena za to izvedbo na zahtevo! Dodatno se zaračunava zakonski davek na dodano vrednost ter embalaža/stroški pošiljanja. ----- Slike prikazujejo stroj za kotne spoje s sponkami 2P z možnostjo nastavljive delovne mize (glejte podrobnosti v razdelku "Dodatna cena"). Dodatne cene: ----- Nastavljiva delovna miza višinsko nastavljiva od 700 do 1000 mm, 2 podstavka, ki ju je mogoče vstaviti dolžina 1000 mm, 2 podstavka, ki ju je mogoče vrteti in premikati dolžina 1000 mm, podstavki oblazinjeni s filcem, 4 kolesa, od tega 2 s zavoro. ----- Dodatna cena: 1.311,00 EUR neto Sponke: paketi 15 mm sponke (paket s 2000 kosi): cena 22,00 EUR 12 mm sponke (paket s 3000 kosi): cena 32,00 EUR 10 mm sponke (paket s 3000 kosi): cena 32,00 EUR Dimenzije in teže ----- Jumbo Automatic E.C. 470 x 370 x 300 mm, 35 kg Delovna miza 32 kg Nodjvnh T Njpfx Anzswk Vse cene so neto. Dodaten davek na dodano vrednost se obračunava posebej. Dobava iz tovarne, dodatno se zaračunavajo embalaža in stroški pošiljanja. (tehnični podatki po podatkih proizvajalca – brez jamstva!)

Stanje: novo, Leto izdelave: 2026, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 400 V, skupna masa: 66 kg, Naša električna verižna žaga s 5 kW je odlična za žaganje snopov metrske drvi v kombinaciji z našim žagalnim kozlom. S žaganjem celih snopov drv/kurilnega lesa prihranite ogromno ročnega dela! V enomanskem načinu je mogoče v nekaj minutah obdelati do 1 kubičnega metra lesa in približno 5 kubičnih metrov na uro. Povprečni čas za en rez je 1,5 minute. Nedpfx Ajfnrx Tonzswk

Stanje: rabljeno, Double edger TRAK-MET PTF2-4, year 2022, like new, feed rate 0.40 m/min, incl. laser, 15 kW, 2 blades, 1150 kg Prices subject to change without notice. Errors and misprints excepted. Nsdpfx Anevr I H Dezjwk

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 500 mm, največja višina reza: 145 mm, največja širina rezanja: 510 mm, skupna masa: 400 kg, premer ekstrakcijske šobe: 150 mm, vrtljajska hitrost (min.): 2.800 obr/min, moč: 5,5 kW (7,48 KM), STROMAB PS 50/F Crosscut Swing Saw - Brand NEW Specification: • Condition: New • Motor power: 5.5 kW • Blade diameter: 500 mm • Motor shaft diameter: 30 mm • Motor speed: 2,800 rpm • Max. cutting width: 510 mm • Max. cutting height: 145 mm • Additional extension tables: 2 x 2 m • Weight: 400 kg • Year of manufacture: 2024/2025 • Noise emission: 85.5 dB(A) • CE compliant Additional information: • The tables shown in the pictures are included with the machine (2 x 2.0 m) Nodpfxordwm To Anzowk • Available within 7–10 working days • Price does not include VAT or transport costs

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024, Completely overhauled: 2024 Control system: Siemens S7 PLC Saw blade max.: 500 mm Motor power: 4.0 kW Saw blade feed: 0–40 mm/s, infinitely adjustable Electronic saw height control Working range, square at 90° max.: 130 x 130 mm Working range, flat at 90° max.: 190 x 130 mm Working range, round at 90° max.: 170 mm The machine has been completely overhauled in-house and is in as-new condition. Among other improvements, the following upgrades have been performed: Nodpeuiy Ngefx Anzewk - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Conversion to pusher with servo control - New electrical components - New pneumatic hoses - New pneumatic components - Conversion to valve manifold - Enhanced extraction performance - New minimum quantity lubrication system - Replacement of general wear parts - Refurbishment of the enclosure The machine is further equipped with: - Minimum quantity lubrication - Chip separator extension (for high-quality cut surfaces without return marks) - Preload magazine for careful handling of painted/anodized surfaces - Scrap piece ejection via pusher - Hinged scrap piece tray Optional features: - Magazine width: 3000 mm - Pusher length: 6000 mm - Pusher length: 8000 mm - Motor upgrade: 5.5 kW - Bar clamping device for parallel cutting of multiple workpieces - Online support connection - Delivery and commissioning at your facility - Operator training

Stanje: rabljeno, Leto izdelave: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm Nwodpeiixxnjfx Anzok Mitre range horizontal: 45°-90°-25° Mitre range vertical: 60°-90°-30° Swivel adjustment with hand crank: yes Roller conveyor / support table: no Saw blade diameter: 420 mm Speed: 2800 rpm Motor power: 3 kW Motor brake: yes Extraction connection: 100 mm Machine length: Machine width: Weight: 110 kg