Stroj Z Dvojnim Robom nakup rabljenega (61.235)

Stanje: novo, Leto izdelave: 2022, DVOSTRANSKI ROBILNIK Z LONEČASTIMI DISKI Produktivnost, natančnost in prilagodljivost so glavne značilnosti serije HE500: dvojni robilniki z lonečastimi diski za brušenje ravnih robov. Opremljeni z najsodobnejšo tehnologijo so to visokokakovostni izdelki, ki zadovoljujejo potrebe tudi najbolj zahtevnih strank; njihova integrirana električna omarica optimizira zaseden prostor in izboljšuje ergonomijo. Modeli HE500 so opremljeni z najboljšimi tehničnimi rešitvami: visokozmogljiva vretena, pomiki z brezkrtačnimi motorji, kroglična vretena za hitre in natančne pomike, komponente najboljših znamk za največjo zanesljivost, 18,5-palčna HD zaslonska nadzorna plošča na dotik skupaj s tipkovnico, kompaktna, uporabniku prijazna in z intuitivno grafiko z ikonami in risbami. Vse potrebne nastavitve so lahko ročne ali avtomatske in jih nadzira upravljalna naprava. Njdpenfu Ndefx Agxocr

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Kopirna rezkalna linija Balestrini Mini-C 2500mm Tip MINI-C Dolžina delovne mize: 2500 mm Dva rezkalna agregata, po eden na vsaki strani Njdpfoy Ew Ehox Agxjcr Pogonski motor rezkalnika: 2 x 5,5 kW Največja višina orodja: 120 mm V kompletu z glavo Hidravlični, brezstopenjsko nastavljiv podajalnik mize Pnevmatski pritisni elementi za agregate in material Število pritrdil za material: 5 kosov

Stanje: rabljeno, Proizvajalec: PRÄWEMA, Tip: 205HS2-2 / Synchrofine, Leto izdelave: 2008, Št. proizvajalca: 077238, Krmiljenje, proizvajalec Rexroth Indramat, Tip System 200 BTV20, vključno z ročnim upravljalnim terminalom, Premer obdelovanca: 95 mm, Največja dolžina obdelovanca: 59 mm, Največja hitrost vretena C-obdelovanec: 6.000 [1/min] / 7.000 [1/min], B-nastavek vretena: 2.000 [1/min], Največji pomiki Z/X: 60 m/min, Hon-glava ZNG št. 416101804-8, leto izdelave 2008, Št. proizvajalca: 221, Postelja stroja iz granita, proizvajalec Eckbert Reitz, tip HFSL204HS2, leto izdelave 2008, Avtomatizacija obdelovanca, Preizkusna naprava za površinsko kakovost, Lovilna kad za olje, Črpalka proizvajalca Brinkmann, tip TH160/350-001, Delovne ure: 18.11.25 69518 Ncsdpfx Ajx Ahc Negxer +++ Pozor: Pozicija je del spletne prodaje v prosti prodaji! +++

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, FIVE STAR THM-460 Horizontal Double-Head Milling Machine with Indexing Axis Ideal machine for machining and chamfering P-plates for toolmaking from 4 sides in a single clamping. Technical Basic Equipment: Control - FANUC 0i-MF - User-friendly touchscreen, 10.4" color display - Dialogue-assisted data entry Machining Capacities - Workpiece length min./max.: 20 – 460 mm - Workpiece width min./max.: 20 – 460 mm - Workpiece height min./max.: 12 – 150 mm (opt. 180 mm) - Max. workpiece corner chamfer: 10 mm Travel Paths - X-axis (machine table): 620 mm - Y/Z-axis (feed axis/spindle box): 330 mm / 330 mm Axis Drive Power - X-axis motor: 2.5 kW - Y-/Z-axis motor: 1.4 kW - B-axis motor: 1.4 kW Speeds - Rapid traverse X (machine table): 15 m/min - Rapid traverse Y (feed axis): 10 m/min - Rapid traverse Z (spindle box): 10 m/min - Manual feed: 0 – 1,500 mm/min - Automatic feed: 0 – 5,000 mm/min Main Spindles - Two horizontally opposed milling spindles, designed for heavy-duty cutting - Drive type: Belt drive - Speed range: each 100 – 1,000 rpm - Drive power: each 11 kW - Spindle interface: each 2" / Ø50.8 mm - Oil-cooled with separate spindle oil cooler (optional) Tools (Standard) - Milling cutter head: Ø160 mm (opt. Ø200 mm); Note: Tools are not included in standard delivery! Rotary Axis (B-axis) - Indexing: (standard 5° increments) - Indexing angles: 0°, 45°, 90°, 135°, and 180° (for 2-side machining) - Table size: Ø320 mm - Max. load: 320 kg Workpiece Alignment - 90° stop for easy loading by the operator - Automatic measuring unit for workpiece position detection Guides - X-axis: Linear roller guide - Y-axis: Flat guide with TURCITE-B coating - Z-axis: Flat guide with TURCITE-B coating - 2 chip spirals (left and right) in the machine - Automatic spiral chip conveyor Other Features - Central lubrication oil/air - Control cabinet with heat exchanger - Partial sheet metal enclosure - Support worktable - Toolbox - LED work light - 3-color signal beacon - CE declaration of conformity in accordance with European directives Dimensions and Weight - Machine size: 2,800 x 3,410 x 2,200 mm - Machine weight: approx. 7,500 kg Spindles - Power-up spindle motor 15 kW Ncodpsvi I Nmjfx Agxsr - Spindle interface each 1-7/8", suitable for face milling cutter Ø200 mm Arbor diameter: Ø47.625 mm Tools - Face milling cutter Ø200 mm, MAROX-Tools Taiwan Type: SE545R/L0810, DC200 Rotary Axis (B-axis) - Indexing axis, 5° increments, standard option Indexing angles: 0°, 45°, 90°, 135° Table size: Ø320 mm Max. load: 320 kg Pneumatics, Coolant, and Chip Management - Chip compressed air nozzle, 1 pc. each, external to the spindles, standard option (metal articulated compressed air tube) - Coolant system with separate coolant tank and low-pressure pump, as well as paper filter, tank capacity: 600 liters, filtration capacity: 80 l/min - Chip spirals (left and right) in the machine, standard option - Automatic hinged belt chip conveyor

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AM00222090802-01-03, - Function: Heat sealing of blister boxes - Main machine material: Stainless steel 304, aluminium alloy - Dimensions: 1000mm x 715mm x 450mm - Weight: approx. 150 kg (without mould) - Power supply: 220 V 50 / 60 Hz single phase, 3.5 kW - Compressed air supply: Pressure 5 bar - 8 bar, approx. 18 L / min Njdpfjpfcy Eox Agxecr - Seal size: 300mm x 400mm - Packaging depth: up to 100mm - Production speed: Up to 12 cycles per minute, depending on operator proficiency - Heat sealing pressure: 300-1500kg adjustable Autovak is an international company with research, development, and manufacturing sites in Suzhou, China, as well as sales and service offices in the United States, Germany, and Malaysia. The company has over 20 years of experience in the field of medical device packaging. From OEM production for European packaging machinery manufacturers to the production of proprietary machines and equipment with independent intellectual property rights and own brands, Autovak has accumulated substantial expertise in medical device packaging and online printing.

Stanje: rabljeno, Leto izdelave: 2004, Premer brusilnega kolesa 660 mm Krmiljenje Siemens 840D Minimalna širina obdelovanca 5 mm / maksimalna 180 mm Maksimalni premer obdelovanca 200 mm Teža stroja cca. 15,0 t Potreben prostor cca. D 3,1 x Š 4,0 x V 2,7 m Na voljo sta 2 stroja. Eden od strojev je primeren za grobo brušenje, drugi za fino brušenje. Stroji so bili uporabljeni za proizvodnjo ojnic. Po naši oceni je stroj v dobrem rabljenem stanju. Ncodpfx Agsxq R Hajxjr Dodatna oprema, prikazana orodja in vpenjala so vključena le, če je to posebej navedeno v dodatnih informacijah. Spremembe in napake v tehničnih podatkih in informacijah ter vmesna prodaja so pridržane!

Leto izdelave: 2007, stanje: rabljeno, Control system: Siemens 840D Grinding wheel diameter: 900 mm Ncjdpfx Aoxq Hkuogxor Workpiece - grinding width: 144 - 152 mm Workpiece - grinding dimension: 22 - 25 mm Speed at 24 m/s: 1,425 rpm Maximum circumferential speed: 25 m/sec Power output: 37 kW Total power requirement: 75 kW Weight: approx. 18.0 t Space requirement: approx. L 4.9 x W 4.9 x H 2.6 m In our opinion, the machine is in good used condition. Double-sided surface grinding machine The machine was used for the production of connecting rods. Accessories, illustrated tools, and clamping devices are only included in the scope of delivery if stated in the additional information. Technical data and information subject to change and error. Prior sale reserved!

Stanje: rabljeno, Leto izdelave: 1998, Krmiljenje Siemens Sinumerik Premer brusnega koluta: 900 mm Širina brusnega koluta: 20-80 mm Po naši oceni je stroj v dobrem rabljenem stanju. Nodpfsxuv Udox Agxecr Na voljo sta 2 stroja. Dodatna oprema, prikazana orodja in vpenjalna sredstva so vključena v obseg dobave le, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter predhodne prodaje!

Stanje: rabljeno, Leto izdelave: 1970, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2.1902.01, dolžina mize: 7.000 mm, hitrost pomika os X: 30 m/min, višina skobljanja: 6.900 mm, širina mize: 1.800 mm, Waldrich Coburg 7DS4039 je težka portalozna oziroma dvostebrna skobelna in brusilna naprava (frezalni stroj tipa 'planer') za obdelavo velikih in težkih obdelovancev. Stroji tega proizvajalca se uporabljajo predvsem v strojegradnji, proizvodnji turbin, tiskarskih strojih ter v orodjarstvu in izdelavi kalupov. Stroj odlikuje masivna portalozna zasnova, visoka togost in velik delovni prostor. Zaradi tega je posebej primeren za grobo in fino obdelavo velikih jeklenih ali litih konstrukcij. Stroji Waldrich-Coburg so znani po visoki natančnosti in dolgi življenjski dobi pri težki obdelavi. Nodpjyt Ey Uofx Agxecr Teža obdelovanca: 15–30 t Navedena cena ne vključuje demontaže, pakiranja in transporta. Prodaja z lokacije, vmesna prodaja pridržana. Stroji se prodajajo v rabljenem stanju; kakršno koli jamstvo ali garancija je izključena.

Stanje: dober (rabljeno), Leto izdelave: 1995, številka stroja/vozila: 40105, Ponudba 26053 Tehnični podatki: - Premer žaginega lista: 550 mm - Največja dolžina reza: 6000 mm - Najmanjša dolžina reza pri 90° + 45°: 350 mm - Razpon reza npr. pri 90°: 110 x 390 mm - oziroma po podatkih s diagrama - Območje nihanja proti notranjosti, pnevmatsko: 90° - 45° - Območje nagiba proti notranjosti, pnevmatsko: 90° - 45° - Hitrost vrtenja žaginega lista: 2800 vrt/min - Pogon: 380 V / 2 x 4000 W Nodeyiz Hcepfx Agxscr - Dimenzije prostora približno: Š 7660 x V 1600 x G 1400 mm - Teža približno: 2100 kg - z: nastavitvijo dolžine reza in kota, - ločeno upravljalno omaro, impulznim mazalnim sistemom, - transportnim valjem.

Stanje: rabljeno, Horizontal machining center with dual pallet changer STEINEL type BFZ 5 with CNC control SIEMENS Sinumerik 810 M Serial No. 34 Year of manufacture: 1988 Travel X: 500 mm, Y: 400 mm, Z: 320 mm Clamping surface, table size: 500 x 400 mm Tool holder: ISO 40 Spindle speed: max. 6300 rpm, infinitely variable Nedpfoutuyiox Agxjcr Main spindle drive: 12 kW Power supply: 380 Volt, 50 Hz, 30 kVA - Tool changer with 24 tool positions - Pallet changer with 2 stations - Interface for data transfer - Coolant system with chip conveyor Required space (L x W x H): 4100 x 2500 x 2650 mm Weight: approx. 8 tons Good condition Transport dimensions: Machine L x W x H: 3200 x 2500 x 2650 mm, approx. 7.5 tons Chip conveyor L x W x H: 3500 x 1100 x 2100 mm, approx. 600 kg

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1995, used Giebel-type packing machine for filling milk cartons Ncjdpfjhx D E Djx Agxjr 1000 packs/h 0.25 L / 0.5 L / 1.0 L for cartons without screw cap

Stanje: rabljeno, Leto izdelave: 2000, Ideal machine for the production of rolling pins, turned round chair legs, and similar items. Nsdpfx Asrmxr Asgxocr

Stanje: rabljeno, Leto izdelave: 1990, Technical Details: Automatic slide feed: 0.0025 - 0.05 mm Total power requirement: 100 kW Grinding spindle slide travel: 150 mm Approx. machine weight: 17 t Grinding spindle drive: 2 x 37 kW Grinding width: 30 - 150 mm Peripheral speed: 34 m/sec Workpiece speed: 60 - 300 mm/sec Grinding height: 70 mm Grinding wheel diameter: 750 mm Grinding tool: 750 x 75 x 350 mm Grinding wheel speed: 870 rpm Njdpfxsvnmnrs Agxjcr Maximum workpiece diameter: 250 mm

Leto izdelave: 1963, stanje: rabljeno, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 512804, 1963 Bobst SP900E met dubbelwerkende stripper in redelijke/goede staat. Goed onderhouden; de afgelopen jaren zijn onder andere de tandwielen, hoofdgrijperkettingen, tegenplaat onder de snijplaat en cardankoppelingen naar de aanvoerkop vernieuwd (originele Bobst onderdelen). De grijperbalken zijn de laatste tijd niet vervangen, maar verkeren nog in goede staat. De kniegewrichten vertonen vrijwel geen slijtage; deze zijn vermoedelijk eerder vervangen en de machine is daarna weinig gebruikt. Er zitten nauwelijks krassen op. Nedpfx Astyqizogxecr De machine is gedemonteerd opgeslagen in ons magazijn in Zuid-Nederland; dus momenteel niet aangesloten op stroom. Bij serieuze interesse van een potentiële koper zullen wij de machine verder opwaarderen, assembleren en de mogelijkheid bieden deze naar wens uitvoerig te testen. In dat geval bedraagt de prijs 22.000 euro, geladen op uw transportmiddel, EX WORKS.

Stanje: pripravljen za uporabo (rabljen), Uciosarko - U2PRW Drilling and Cutting Machine is designed for processing strips and furniture fronts made of solid wood or MDF. The machine operates in a semi-automatic cycle. During each working cycle, the machine performs: cutting at a set angle (between 45° and 90°) and drilling in the mitered plane or on the edge of the workpiece. – Manufactured in Poland TECHNICAL SPECIFICATIONS: - Max. height of material: 60 mm - Max. width of material at 45°: 70 mm - Max. width of material at 90°: 150 mm Nedsq Ii Dljpfx Agxjcr - Max. length of material: 2200 mm - Min. length of material at 45°: 455 mm - Main saw blade diameter: 250 or 300 mm - Scoring blade diameter: 100 mm - Max. bottom milling cutter diameter: 35 mm - Max. bottom milling depth: 15 mm - Mounting diameter for face drills and bottom milling cutter: 10 mm Drilling Head (Face Drilling): - Spindles: 4 - Spindle axis spacing: 32; 32; 40 mm - Spindle layout: linear - Max. face drilling depth: 60 mm - Installed power: 7 kW - Operating pressure: 0.6 MPa - Dimensions (L/W/H): 4300 / 1600 / 1570 mm Machining Units The machine is equipped with two machining units. The left unit is fixed; the right unit is movable. Each machining unit consists of the following subassemblies: main saw, scoring saw, drilling unit for drilling in the mitered plane, and a drilling unit for bottom drilling. Bottom Drilling Unit (Optional) This unit is optional and used mainly when machining corner trims for adjustable-width door frames. It performs blind drilling for connector fittings. The photo shows a red cover that serves both as a base for angle strips and as a chip extraction cover. Workpiece Clamping The machine is equipped with a dual-plane clamping system, including both horizontal and vertical clamps. Horizontal clamps provide precise pushing to vertical references and straighten the workpiece; vertical clamps immobilize the workpiece during processing. Horizontal clamping always precedes vertical clamping. Control System The control system is clear, user-friendly, and functional. It allows for separate activation/deactivation of all units, as well as independent control of the left and right sides. All units have individual drives. The right machining unit is positioned by pressing control buttons on the operator panel. An electric motor with a gear mechanism and trapezoidal screw enables movement. Material length is set and read electronically, with an operator panel and digital display. The system also automatically adjusts measured values when changing cutting angles (45° and 90°), and performs automatic referencing.

Stanje: rabljeno, Leto izdelave: 1996, Technical details: Machine weight approx.: 15 t Ncodpfx Agsizldxoxjr

Stanje: rabljeno, Leto izdelave: 1995, Technical details: Grinding height: -- mm Grinding width: 220 mm Grinding wheel diameter: 762 mm Total power requirement: 90 kW Machine weight approx.: 13 t Spindle drive: Grinding spindle 1: 37 kW Spindle drive: Grinding spindle 2: 37 kW Ncedjwi Nh Njpfx Agxer Grinding machine for rough grinding of connecting rods Including 2 spare spindle motors

Leto izdelave: 1992, stanje: rabljeno, Grinding height 50 mm Grinding width 120 mm Grinding wheel diameter 600 mm Total power requirement 85 kW Machine weight approx. 9500 kg D I S K U S CNC-controlled, vertical double-sided surface grinding machine with rotating workpiece infeed and IONIC measurement control. Type: DDS 600 III PRM - CNC Year of manufacture: 1992, No. 7924 --- Grinding wheel dimensions (each): 600 x 150 x 75 mm (H) Workpiece data: Grinding height approx. 1.5 – 50 mm Grinding width approx. 20 – 120 mm Vertical quill adjustment, each approx. 150 mm Infeed increment of grinding wheels via CNC: 0.0001 mm Workpiece transport device, continuously adjustable feed: 40 – 235 mm/sec Grinding wheel speed (each, 30 m/s): 191–955 rpm Grinding spindle drive, infinitely variable (each): 37 kW Total drive power approx. 85 kW / 380 V / 50 Hz Weight approx. 9,500 kg Accessories / Special Features • SIEMENS CNC control SINUMERIK 810 G with display for 4 axes (top and bottom infeed, dresser, and workpiece rotation), direct input of all grinding parameters, and • IONIC measurement control no. 17 A with 2 measuring probes for scanning the workpieces after the grinding cycle, triggers automatic infeed corrections for the grinding wheels; real-time measurement data on monitor for statistics, workpiece counting, etc. • Digital display of current (amperage) of the drive motors and grinding wheel speed • Gantry construction for increased stability and improved grinding accuracy • Rotary workpiece transport with continuously variable speed control as 4th axis • Position control system for monitoring the height position of the lower grinding wheel • 2 adjustable workpiece hold-downs each at the infeed and outfeed, with height monitoring, simple raw part stacking mechanism, finished parts removal via conveyor belt • Half-inclined, side-mounted grinding wheel dressing device with preprogrammable dressing cycles, integrated as CNC axis in the control system with safety shut-off • Large separate electrical cabinet, automatic central lubrication, high-performance pneumatic system • Large PROMATEC (F) coolant system with filtration unit and magnetic separator • Various grinding wheels, flanges, various table segments, transport discs, large dust extraction system, etc. Ncsdpst Hw Nasfx Agxer This machine is particularly suitable for simultaneous, parallel surface grinding of workpieces in large series, such as punched parts, piston rings, hydraulic components, etc. Condition: good to very good – soon available for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice This offers a very rare opportunity in terms of both condition and price. If you require another grinding machine, especially from the manufacturer DISKUS, please send us your inquiry.

Stanje: rabljeno, Leto izdelave: 1969, Grinding height: 60 mm Grinding width: 120 mm Grinding wheel diameter: 600 mm Grinding length: [mm not specified] Workpiece height: 60 mm Total power requirement: 50 kW Machine weight: approx. 7,000 kg Space requirement: [not specified] DISKUS vertical double-sided surface grinding machine in C-frame design with rotary table workpiece feed Model: DDS 600 CRA Year of manufacture: 1969 S/N: 6672 Grinding wheels – diameter x bore each: 600 x 150 mm Grinding wheel height approx.: 60 mm Workpiece transport disc external diameter: 810 mm Workpiece: Max. grinding height x grinding width: approx. 60 x 120 mm Spindle adjustment vertically, each approx.: 150 mm Hydraulic infeed impulses for depth feed: 0.0025 – 0.05 mm Outer diameter of transport disc: approx. 810 mm Rotary table feed rate steplessly adjustable: 14 – 145 mm/s Nedpfxet Hw N Ho Agxocr Grinding wheel speed each approx. (24 m/s)/765 rpm Grinding spindle drive each: 22 kW Total drive approx.: 50 kW / 380 V / 50 Hz Machine weight: approx. 7,000 kg Accessories / Special features • Workpiece rotary table device for round transport discs with corresponding cut-outs for inserting components and with automatic discharge of finished parts onto a chute into a transport box. • IONIC measuring control No. 9 So with probe for measuring ground workpiece height and, if required, with automatic hydraulic grinding wheel infeed. • Stepless speed adjustment of the rotary device depending on the grinding dimension and workpiece. • Manual grinding wheel adjustment via corresponding buttons • Hydraulically pivoting dressing unit (RA) between both grinding wheels for simultaneous dressing of both grinding wheels with appropriate compensation and automatic return to the effective workpiece thickness after dressing = high time savings, can be triggered manually as well as via timer • Ampere counters for both grinding spindle drives * Central lubrication system, • Mechanical height check of parts with automatic machine shutdown in case of overheight • Separate control cabinet, separate hydraulic unit, separate large belt filter system, various grinding wheels, various transport discs, etc. This machine is particularly suitable for the simultaneous plane-parallel grinding of workpieces in high-volume production. For example: shims, piston rings, hydraulic components, watch parts, stamped parts, etc. Condition: good – soon ready for demonstration Delivery: ex stock – as inspected Payment: net – upon receipt of invoice

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: omejena funkcionalnost, premer diska: 525 mm, Weight approx. 1,900 kg Dimensions (LxWxH) approx. 1,800 x 1,500 x 2,200 mm Lapping plate diameter 525 mm Nsdpfeh Invrex Agxocr Maximum lapping ring width 175 mm Maximum workpiece size 170 mm Lapping plate speed 45/70/90/140 rpm Main drive power 4.0 kW Connection 400V/50Hz Emergency stop switch Conventional control with operator panel Full-featured lapping machine, conventional control

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Sealing of Bags: - Flat pouches. - Doypack pouches (stand-up pouches). Integration of Zippers: - Capability to seal all types of zipper closures. Advanced Finishing: - Punching of holes, handles, and easy-open features. - Rounded corners for aesthetic and safety purposes. Njdevdptcepfx Agxjcr Branson Ultrasonic Technology: - Ultrasonic sealing of zippers ensures precision and durability. Additional Equipment: - Built-in screw compressor (10 bar). - Chiller for the cooling station, ensuring efficient cooling of bottom and zipper seals. Technology and Modular Design: - The modular machine design allows adaptation to various film types, including laminated and co-extruded films, while maintaining high precision and process repeatability. - Servo technology provides excellent control of tension and sealing time, resulting in outstanding product quality and consistency. Pouch Types Produced with the Vegaplus Pouch System: - Three-side sealed bags. - Zipper bags. - Doypack pouches (stand-up pouches) made from a single film or with a separately inserted bottom gusset. - Retort pouches with rounded corners (without notch). - Side-gusset pouches with zippers.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, številka stroja/vozila: 23 03 28 / 1, Funkcionalnost: popolnoma funkcionalen, TWIN BELT GRINDER TYPE ZBS do ręcznego szlifowania, satynowania i polerowania • wyposazona w stojak maszynowy po lewej stronie z napędem pasa szlifierskiego oraz stojak maszynowy po prawej stronie z jednostką napinającą pas szlifierski • wolna przestrzeń robocza dzięki prowadzeniu pasów poprzez górnie umieszczoną jednostkę odchylającą • otwieranie i zamykanie górnych osłon pasów szlifierskich przez siłownik pneumatyczny • zabezpieczenie przed wypadkami dzięki ruchomej osłonie pasa szlifierskiego • wybór przedniego lub tylnego pasa szlifierskiego • preselekcja za pomocą 2 potencjometrów w panelu sterowania oraz przemiennika częstotliwości w wersji high-line • z wyłącznikiem krańcowym/obsługa przez ruchomą osłonę pasa szlifierskiego • naprężenie każdego pasa szlifierskiego pneumatycznym napinaczem pasa • pas szlifierski napędzany silnikiem prądu przemiennego sterowanym częstotliwościowo, moc P = 4,0 kW • przemiennik częstotliwości z modułem hamującym umożliwiający zatrzymanie w maks. 10 s • prędkość pasa szlifierskiego v = 4 – 25 m/s • wyłącznik awaryjny w strefie roboczej • stół przesuwny z rury aluminiowej umieszczony pomiędzy stojakami maszyny • ruch stołu w przód i w tył na 4 miękkich rolkach pryzmatycznych • maks. waga obrabianego elementu 100 kg • zmotoryzowana regulacja wysokości stołu wrzecionami i prowadnicami rolkowymi do maks. 780 mm Nodpfx Aot Hvkvsgxecr • napęd wrzecion przez 2 synchroniczne motoreduktory o mocy P = 0,75 kW, prędkość v = 0,5 – 1,5 m/min • maszyna bez dolnej poprzeczki dla zwiększenia przestrzeni roboczej do efektywnej głębokości 1400 mm (dolna krawędź pasa – podłoże) • z tymczasową poprzeczką do demontażu po ustawieniu i przymocowaniu do podłoża • docisk pasa szlifierskiego do obrabianego elementu ręcznie przez wahliwy docisk z śrubą blokującą, miękkie prowadzenie na rolkach pryzmatycznych • rura odciągowa na lewym stojaku maszyny, D = 200 mm • wymagana wydajność odciągu = ok. 3400 m3/h • pole robocze oświetlone dwoma lampami LED, regulacja 3-stopniowa ZBS 3 – wymiary stołu 3000 x 1000 mm, pas szlifierski 100 x 9000 mm Filtr w zestawie. Dodatkowe informacje w załączonym pliku PDF.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, VFFS machine for the production of doypacks with zipper, including 4-head linear weigher. Equipped with: touchscreen, PLC, photo sensor (registration mark detection) for sealing/cutting position, pneumatic sealing unit for end sealing, servo motor for film draw-off, thermal transfer printer for batch number, date, and best-before date. VFFS Machine Specifications: Max. machine cycle rate (idle): 35 cycles/min; 2 form sets for pouch sizes: approx. L 210mm & 300mm, approx. W (70-300)mm; Suitable film width: 280-720mm; Product-contact parts made of AISI304. Weighing Unit Specifications: 4 weighing heads; Weighing range: 50-2000g; Nodpfov Hpfkjx Agxecr Weigh hopper volume: 3L; Product-contact parts made of AISI304. New and with warranty. Available immediately from Reinbek.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: C431-Q11, Balestrini double-head tenoning machine, model T0 Two work tables Ncsdpfxsw A Rp Ij Agxor For round and longitudinal tenons Various adjustments: height, width, length, etc. Tenoning machine fully refurbished, including electrical cabinet, PLC, and sensors. Machine can be seen in operation at our premises. Price includes loading of the equipment. Transport and installation available at additional cost.