Stroj za rezanje z dvojnim vrtalnikom z vrtanjem

Zotech U2PRW

Uciosarko - U2PRW Drilling and Cutting Machine is designed for processing strips and furniture fronts made of solid wood or MDF. The machine operates in a semi-automatic cycle. During each working cycle, the machine performs: cutting at a set angle (between 45° and 90°) and drilling in the mitered plane or on the edge of the workpiece.

– Manufactured in Poland

TECHNICAL SPECIFICATIONS:
- Max. height of material: 60 mm
- Max. width of material at 45°: 70 mm
- Max. width of material at 90°: 150 mm
- Max. length of material: 2200 mm
- Min. length of material at 45°: 455 mm
- Main saw blade diameter: 250 or 300 mm
- Scoring blade diameter: 100 mm
- Max. bottom milling cutter diameter: 35 mm
- Max. bottom milling depth: 15 mm
- Mounting diameter for face drills and bottom milling cutter: 10 mm

Drilling Head (Face Drilling):
- Spindles: 4
- Spindle axis spacing: 32; 32; 40 mm
- Spindle layout: linear
- Max. face drilling depth: 60 mm
- Installed power: 7 kW
- Operating pressure: 0.6 MPa
- Dimensions (L/W/H): 4300 / 1600 / 1570 mm

Machining Units
The machine is equipped with two machining units. The left unit is fixed; the right unit is movable. Each machining unit consists of the following subassemblies: main saw, scoring saw, drilling unit for drilling in the mitered plane, and a drilling unit for bottom drilling.

Bottom Drilling Unit (Optional)
This unit is optional and used mainly when machining corner trims for adjustable-width door frames. It performs blind drilling for connector fittings. The photo shows a red cover that serves both as a base for angle strips and as a chip extraction cover.

Workpiece Clamping
The machine is equipped with a dual-plane clamping system, including both horizontal and vertical clamps. Horizontal clamps provide precise pushing to vertical references and straighten the workpiece; vertical clamps immobilize the workpiece during processing. Horizontal clamping always precedes vertical clamping.

Control System
Iedpfx Asq Ii Dledkjap
The control system is clear, user-friendly, and functional. It allows for separate activation/deactivation of all units, as well as independent control of the left and right sides. All units have individual drives. The right machining unit is positioned by pressing control buttons on the operator panel. An electric motor with a gear mechanism and trapezoidal screw enables movement. Material length is set and read electronically, with an operator panel and digital display. The system also automatically adjusts measured values when changing cutting angles (45° and 90°), and performs automatic referencing.

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.