Sesotec Gmbh Nir Skener Em Detektor nakup rabljenega (72.808)

Leto izdelave: 2019, obratovalne ure: 3.000 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 10031325, Gre za napravo z visoko ločljivostjo, ki deluje v bližnji infrardeči regiji (NIR) in lahko zazna delce velikosti približno 3 mm. Poleg tega je naprava opremljena z elektromagnetnim detektorjem, ki ima občutljivost približno 1,5 do 1 mm – odvisno od vrste kovine. Odvisno od nastavitve je mogoče izvajati pozitivno ali negativno selekcijo. Dcodpfxjzl Uzwo Aahsl Tehnični podatki: Širina traku: 1024 mm Širina delovne odprtine: 6,4 mm Po potrebi lahko posredujemo celotno dokumentacijo. Naprava je bila v uporabi v raziskovalnem in razvojnem centru v Izraelu. Ker podjetje zdaj obratuje v Evropi, bo raziskovalni in razvojni center zaprt. Naprave bodo na stroške lastnika prepeljane v Evropo in jih je mogoče prevzeti v pristanišču ali v proizvodnem obratu v Evropi po načelu EXW (Franco tovarna). Podrobnosti o optimalnem transportu je treba dogovoriti. Cena naprave je brez embalaže na paleti.

Leto izdelave: 2016, stanje: rabljeno, Kovinski separatorji, 3 kosi, blagovne znamke Sesotec so naprodaj. Naši GF detektorji kovin za pnevmatske aplikacije nudijo optimalno zaščito pred proizvodnimi zastoji, prekinitvami in reklamacijami strank. Dedpfx Aaeyrl Nyjhecl Primerno za jeklo, baker, neželezne kovine, nerjavno jeklo (VA). CENA velja za kos .....1750€

Leto izdelave: 2026, stanje: novo, Silicone membrane sheet for membrane presses, silicone membrane for membrane presses, natural rubber membrane MEMBRANES for membrane presses – silicone or natural rubber Highest quality, suitable for all membrane presses (for foil and veneer pressing). Our membranes are available pre-cut to your required dimensions or as roll stock. For 3D furniture front production, we also offer solutions for presses, foil cutting machines, foil carousel systems, and cleaning machines! MEMBRANES for membrane presses – made from silicone or natural rubber Highest quality, suitable for all membrane presses (for foil and veneer pressing). Our membranes are available pre-cut to your required dimensions or as roll stock. SILICONE Type: SM-1 3mm Color: translucent milky Surface: smooth / smooth Dsdjff Agispfx Aahecl Standard widths: 1700 and 1800 mm Polymer base: silicone Hardness: 50° Shore Thickness: 3mm Operating temperature: min. -50°C / max. 230°C SILICONE Type: SM-1 2mm Color: translucent milky Surface: smooth / smooth Standard width: 1700 mm Polymer base: silicone Shore hardness: 50° +/- 3° Shore Thickness: 2mm Operating temperature: min. -60°C / max. +230°C NATURAL RUBBER Type: RM-2 Color: grey Surface: smooth / smooth Standard widths: 1700 and 2000 mm Rubber: natural rubber Hardness: approx. 42° Shore Thickness: 1.8mm, 2.5mm, and 4mm Operating temperature: min. -20°C / max. +130°C For 3D furniture front production, we also offer solutions for presses, foil cutting machines, foil carousel systems, and cleaning machines!

Stanje: novo, Leto izdelave: 2025, General: - Maximum temperature range: 150°C for oil (heat transfer fluid) - Robust sheet steel housing - Unit mounted on castors Hydraulics: - Seal-less immersion pump - Max. flow rate: 60 l/min, max. pressure: 3.8 bar - Tank and heater made of stainless steel - Heating capacity: 9 kW - Tank volume: approx. 20 litres - Fittings made of brass/stainless steel - Manual oil filling - Mechanical level control - Indirect cooling system (shell-and-tube heat exchanger) - Cooling capacity: approx. 40,000 kcal/h - Pressure gauge - Bypass - Solenoid valves for cooling Electrics and controls: Dcsdpfxjddv Its Aahel - Electronic PCB controller - Solid state relays - Safety thermostat - Sensor break monitoring - Connection cable with plug Available in approx. 4 weeks!

Stanje: novo, Leto izdelave: 2025, pritisk: 12 letvica, Innovative dust-free sandblasting machines combine the performance of conventional sandblasting with a vacuum system that captures all dust and removed materials during operation. This eliminates not only the need for extensive cleaning, but also protects the operator and those nearby from the harmful effects of airborne particles. Djdpfjupzn Eox Aahecl With a dust-free sandblasting machine, you can carry out cleaning and surface preparation faster and more efficiently. Thanks to intuitive controls and user-friendly design, these machines are also easy to operate for sandblasting beginners. ✅ PR 50 Dust-free sandblasting machine With its versatile range of applications, the PR 50 can process a wide variety of surfaces, from hard metal to delicate glass. Our PR 50 is an excellent choice for anyone working in the automotive, construction, or cleaning industries, to name just a few. Thanks to its compact size and convenient design, it is easy to operate and transport—even for those new to sandblasting.

Stanje: novo, Leto izdelave: 2025, Innovative dust-free sandblasting machines combine the performance of conventional sandblasting with a vacuum system that collects all dust and removed material during operation. This not only eliminates the need for extensive cleaning, but also protects operators and people in the vicinity from the harmful effects of airborne particles. With a dust-free sandblasting unit, you can carry out cleaning and surface preparation faster and more efficiently. Thanks to the intuitive controls and user-friendly design, these machines are easy to operate even for sandblasting beginners. Dcjdpfx Aaewc Rg Hshjl ✅ DINO II & DINO MASTER Available in 60 and 100 litre versions The SAPI pressure/vacuum sandblasting machine "DINO" is a compact and universally applicable unit. It is characterised by its robust construction and mobility. The blasting performance depends on various factors such as surface condition, compressor capacity, type of blasting media, etc. Cleaning capacity: 3–10 m² per hour. All in all, this device offers the operator a clean working environment, low abrasive consumption (thanks to the vacuum system), and reduced disposal costs. The unit is used in the steel, shipbuilding, and petrochemical industries, as well as for maintenance work in construction, by stonemasons, and more.

Stanje: novo, SAPI Praškasto Barvanje Popolna prevleka za dolgo zaščito. Praškasto barvanje je zelo učinkovita in široko uporabljena metoda za nanašanje zaščitne in dekorativne površine na različne vrste substratov. Gre za suhi postopek, pri katerem se fina prah, sestavljena iz smol, pigmentov in dodatkov, nanese na substrat. Prah je elektrostatično napolnjen, zato se enakomerno oprime površine in ustvari enakomerno prevleko. Dodsun Sd Uspfx Aahjcl Za dosego optimalne oprijemljivosti in trajnosti se substrat najprej temeljito očisti in pripravi. Olja, umazanija in druge nečistoče se odstranijo, da se zagotovi čista površina. To je ključnega pomena, da se prah učinkovito poveže s substratom in ustvari trdno in dolgo obstojno prevleko. Komponente Praškastega Barvnega Sistema Tipičen sistem praškastega barvanja je sestavljen iz več komponent in naprav, potrebnih za nanašanje in strjevanje praškaste prevleke. Kabina za Pršenje in Območje Pršenja Kabina zagotavlja čisto okolje za postopek nanašanja in zagotavlja enakomerno porazdelitev praška. 🎨 Pištola za Praškasto Barvanje Pištola za praškasto barvanje se uporablja za nanašanje praškaste prevleke na delovni kos. 💨 Sistem za Napajanje s Praškom Sistem za napajanje s praškom je sestavljen iz lijaka ali posode, v kateri je shranjen material za praškasto barvanje. Običajno vključuje naprave, kot so črpalke za prah, dovodne cevi in sita, ki prah prenašajo iz skladišča do pištole za pršenje. 🔄 Napravite za Predobdelavo Sistemi za predobdelavo se uporabljajo za pripravo substrata pred nanašanjem praškaste prevleke. To lahko vključuje postopke, kot so čiščenje, razmaščevanje, izpiranje in obdelava površine, da se zagotovi dobra oprijemljivost in trajnost prevleke. 🧼 Peč za Strjevanje Peč za strjevanje je ključna komponenta praškastega barvnega sistema. Uporablja se za segrevanje prevlečenega substrata na ustrezno temperaturo, da se prah stopi, tekoče preide in strdi v trajno površino. Peč običajno vključuje sistem za transport ali police, ki prenašajo prevlečene dele skozi peč. 🔥 Sistem za Odsesavanje V sistemu je nameščen sistem za odsesavanje, ki odstranjuje odvečni prah, pare ali hlapne spojine, ki nastanejo med postopkom nanašanja prevleke. Pomaga pri ohranjanju čistega in varnega delovnega okolja za osebje in preprečuje kopičenje prahovih delcev v zraku. 🌬️ Iščete rešitev za Praškasto Barvanje? Iščete prilagojeno rešitev za praškasto barvanje? Specializirani smo za zagotavljanje rešitev za praškasto barvanje, ki so prilagojene vašim specifičnim potrebam. Ne glede na to, ali imate specifične zahteve glede barve, kompleksnih zasnov ali težkih substratov, je naš izkušen tim pripravljen zagotoviti izjemne rezultate. 💡 Kontaktirajte nas še danes, da se pogovorimo o vaših potrebah in nam dovolite, da razvijemo prilagojeno rešitev za praškasto barvanje. 📞 Kontaktirajte nas še danes!

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, PAGO sistem L600, naprava za etiketiranje farmacevtskih izdelkov | Obsežna modernizacija | GMP | Na voljo takoj Proizvajalec: PAGO Etikettiersysteme GmbH (Fuji Seal) Model: Sistem L600 Letnik izdelave: 2013 Na prodaj je kakovostna naprava PAGO sistem L600 za etiketiranje v farmacevtski industriji. Naprava je primerna za etiketiranje vial, injekcijskih stekleničk in drugih cilindričnih embalaž v skladu s standardi GMP. Leta 2018 je bila naprava že tovarniško nadgrajena in modernizirana za dodatne formate izdelkov. Leta 2022 smo napravo kupili rabljeno in jo takoj dostavili proizvajalcu Fuji Seal / PAGO Deutschland. Tam je bila v celoti pregledana, vzdrževana in obsežno modernizirana. V te ukrepe je bilo investiranih 60.200 €. Pred dostavo je bil v tovarni Fuji Seal izveden popoln tovarniški sprejemni test (FAT). Naprava je tehnično v odličnem stanju in je takoj pripravljena za uporabo. Oprema Laetus/Keyence vizualni sistem za nadzor tiskanja in kode Nov Allen / Novexx termotransferni tiskalnik Siemens PLC krmilnik Upravljanje na dotik Postaja za navijanje Postaja za izmet Servo pogoni Izvedba iz nerjavnega jekla, skladna s standardi GMP Popolna zaščitna ograja Originalna dokumentacija Tehnični podatki Proizvodnja do 120 izdelkov/min Za viale in injekcijske stekleničke Izvedba skladna s standardi GMP Letnik izdelave 2013 Proizvajalec: PAGO Etikettiersysteme GmbH Zakaj se naprava prodaja? Za našo novo farmacevtsko proizvodno tovarno (CMO) smo nabavili dve novi napravi za etiketiranje. Zaradi prostorskih omejitev ta naprava ni več potrebna. Prednosti Obsežna modernizacija s strani Fuji Seal / PAGO Potrjena naložba v višini 60.200 € Tovarniška nadgradnja že leta 2018 Popoln FAT pri proizvajalcu Odlično vzdrževano stanje Na voljo takoj Znatno ugodnejša od nove naprave Primerljiva naprava PAGO/Fuji Seal za etiketiranje farmacevtskih izdelkov stane leta 2026, odvisno od opreme in stopnje avtomatizacije, več kot 450.000 €. Dcsdezpzbfepfx Aahsl Ogled je možen po dogovoru. Dodatne fotografije, videoposnetke in tehnično dokumentacijo vam z veseljem pošljemo na zahtevo.

Stanje: rabljeno, Kriogeni rezervoar za pline, nameščen na prikolici – CRYOBASE Rabljen za tekoči kisik, dušik in argon Djdpfx Aeznb Nyoahecl Prostornina: 24 m³ Prva registracija: 29. 09. 2025 Črpalka, merilnik pretoka, izparilnik, vakuumna izolacija. Novi tehnični pregled, preizkus vakuuma in tesnosti. Imamo tudi druge prikolice za tekoči dušik (LIN), tekoči kisik (LOX), tekoči argon (LAR), utekočinjeni zemeljski plin (LNG) in ogljikov dioksid (CO2), argon, kisik, dušik, ogljikov dioksid, utekočinjeni zemeljski plin, vodik in metan. Za dodatna vprašanja smo vam na voljo po telefonu ali po e-pošti.

Stanje: novo, lastna masa: 9.600 kg, Leto izdelave: 2026, Nov plinski cisternski polpriklopnik za CO₂ (ogljikov dioksid) Proizvajalec: CRYOBASE GmbH Prostornina: 23 m³ Obratovalni tlak: 22 bar Djdpfxeymza De Aahocl S črpalko Lastna masa: 9.600 kg Prva registracija: leto 2026 Na voljo imamo tudi druge cisternske polpriklopnike za LIN, LOX, LAR, LNG in CO₂, argon, kisik, dušik, ogljikov dioksid, LNG, vodik in metan. Za dodatna vprašanja smo vam na voljo po telefonu ali e-pošti.

Leto izdelave: 2026, stanje: novo, Solid steel cutting dies – EDM processed Our cutting dies are manufactured from selected grades of steel and are available in a wide range of geometries and standards, such as ISO, DIN, JIS, ASTM, and IEC. Key features: - Expert selection of steel grades - Cutting geometry tailored to specific materials - Optional equipment with various sample ejectors and clamping pins - Custom production in different heights available Dodskkhkuepfx Aahscl - Also available as multicutter versions - Excellent cutting finish - Optimal cutting results - Suitable for all types of presses, e.g. manual toggle presses, pneumatic or hydropneumatic presses

Stanje: novo, Leto izdelave: 2025, TEMP 90 W9 SSR - DM General Information: - Maximum temperature range: 90°C water - Robust steel sheet housing - Device mounted on castors Hydraulics: - Immersion pump (Brand: Speck) with pressure/vacuum function (leakage stop operation) - Max. flow rate: 60 l/min - Max. pressure: 3.8 bar - Tank and heater made of stainless steel - Heating capacity: 9 kW - Tank capacity: 12 litres - Fittings made of brass/stainless steel Dcodpsd Aathsfx Aahjl - Automatic water refill - Electronic level control - Indirect cooling system (plate heat exchanger) - Cooling capacity: approx. 40,000 kcal/h (10 plates) - Pressure gauge display - Integrated bypass - Solenoid valves for cooling and refilling Electrical and Control System: - Electronic, self-optimising PCB controller - Electronic flow measurement - Control voltage in the device: 24 V AC - Acoustic and visual alarm indicator - Solid state relays - Safety thermostat - Sensor break monitoring - Monitoring of hose rupture and leakage - Connection cable with plug - Dimensions: 295 x 575 x h495 mm - Weight: 40 kg

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Predmet ponudbe je kompaktni stroj za deljenje in oblikovanje žemelj Mini Rex Futura, ki se odlikuje po visoki zmogljivosti in širokem razponu teže ob ohranjanju visoke kakovosti obdelave testa. OPIS NAPRAVE Dsdpfxey Angqj Aahocl Stroj za deljenje in zaokroževanje žemelj Mini Rex Futura, letnik 2011. Ročni vnos testa v lijak Dvo-vrstno delovanje Ročno prevzemanje izdelkov s transportnega traku Zmogljivost: 33 ciklov/min; 3960 kosov/uro Razpon teže: L: 25g – 75g ; H: 70g – 140g Kontrolna plošča Testo: pšenično, graham, kvašeno, krofi Enoosebno upravljanje Mere stroja (v x d x š): 1800 x 1770 x 650 mm Rok dobave: prenova zaključena, naprava je pripravljena za prevzem. Pišite nam in poslali vam bomo cenovno ponudbo ter več podrobnosti.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, obratovalne ure: 2.500 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.100 kg, premer rotorja: 700 mm, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, največja hitrost vrtenja: 3.400 obr/min, moč: 90 kW (122,37 KM), Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Ta drobilna naprava je izjemna in zelo inovativna. Material, ki ga je treba obdelati, se drobi v 6 vrstah majhnih komor, od delca do delca, hkrati pa se delci vržejo proti mlinu. Ti dve učinka skupaj ustvarjata zelo fino zrnatost, pri tem pa je mogoče material posušiti med procesom drobljenja. Ključne besede: turbinski mlin, udarni mlin, vrtinčni mlin. Naprava lahko, odvisno od materiala, drobi do velikosti delcev od 1000 µm do 5 µm. Pri tem je pretok od 100 do 900 kg/h – odvisno od materiala. Možnosti uporabe segajo od mineralov, industrijskih izdelkov, prašnih lakov, kemikalij, barvil do živil in krmil. Inovacije naprave so: • vtične povezave obrabnih orodij (vedno na istem mestu z najmanjšimi tolerancami) • vrtenje v obe smeri – tako se orodja enakomerno obrabljajo na obeh straneh • konična oblika – omogoča natančno nastavitev reže za rezanje z uporabo samo 12 vijakov na 0,1 mm. Djdpfxszl Shzo Aahjcl Tehnični podatki: • moč pogona 90 kW – frekvenčni pogon je obvezen – velikost 90 kW z nadtokom 150 % 60 sekund. • hitrost do 125 m/s • orodja: rotor in stator iz trdega kovinskega zlitine, na voljo v različnih stopnjah trdote, možna je tudi keramika. • nadzor naprave s pomočjo merjenja temperature ležajev in merjenja vibracij, vključno z opremo. • električna omarica ni vključena. Naprava je bila v uporabi v raziskovalnem in razvojnem centru v Izraelu. Ker podjetje zdaj vodi proizvodnjo v Evropi, se bo raziskovalni in razvojni center zaprl. Naprave bodo na stroške lastnika prepeljane v Evropo in jih je mogoče prevzeti v pristanišču ali v proizvodnem obratu v Evropi (EXW).

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 30 h, ✅ 1. Metalworking companies with medium to high batch sizes 🔹 Series production / repeat parts If you produce many identical or similar parts, automation pays off because it reduces the cost per part and delivers consistent quality. 🔹 High production volumes > 1,000 parts/month The higher the output, the quicker the investment pays off through increased productivity. ✅ 2. Companies facing a shortage of skilled labor or high workloads 🔹 Difficulty finding or retaining qualified staff A robot can partially substitute skilled operators and secure your production capacity. 🔹 Night shifts / 24/5 production Robots can work longer and without fatigue → higher output without extra staff. Dcjdpfx Aaoyb I Azshjl ✅ 3. Operations with complex bending processes or high quality requirements 🔹 Tight tolerances / avoiding small errors Robotics ensure consistent repeatability. 🔹 Complex secondary operations (e.g., handling, deburring, stacking) An integrated robot can take over tasks that are otherwise done manually. ✅ 4. Manufacturers under tight time or cost pressure 🔹 Demanding short delivery times Automation reduces lead times. 🔹 Cost pressure due to competition Longer machine utilization and lower part costs boost your competitiveness. ✅ 5. Companies focused on future viability 🔹 Industry 4.0 / Digitalization An automated press brake can often be integrated more efficiently into IT/MES systems. 🔹 Scalable production If you plan to grow in the future, you have a flexible foundation.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 20-3443, vhodna napetost: 400 V, skupna širina: 2.286 mm, skupna dolžina: 11.994 mm, skupna višina: 2.582 mm, temperatura: −80 °C, vrsta vhodnega toka: trifazni, hladilna zmogljivost: 12 kW (16,32 KM), vhodni tok: 63 A, temperatura okolja (min.): −20 °C, vhodna frekvenca: 50 Hz, okoljska temperatura (maks.): 42 °C, Ponujamo mobilno, redundantno hladilno skladišče za nizke temperature v izvedbi kontejnerja, ki je sestavljeno iz predprostora z delovno temperaturo -20 °C in skladiščnega prostora z nastavljivo temperaturo do -80 °C. Tehnični podatki Temperatura skladišča (nastavljiva): do -80 °C Dovoljena temperatura okolja: -20 °C do +42 °C Število hladilnih krogov: 4 Nivo zvočnega tlaka (1 m v prostem polju): 73 dB(A) Hladilni krog – stopnja 1 Hladilno sredstvo: R449A (GWP: 1.397) Število kompresorjev: 2 Izvedba kompresorjev: polhermetični batni kompresorji, regulirani s frekvenco Hladilni krog – stopnja 2 Hladilno sredstvo: R508B (GWP: 13.396) Dcodpfx Aezg Dtxeahsl Število kompresorjev: 2 Izvedba kompresorjev: polhermetični batni kompresorji, regulirani s frekvenco Kondenzator Število kondenzatorjev (stopnja 1): 2 Oddana toplotna moč na kondenzator: 35,0 kW Ventilatorji na kondenzator: 2 Vrsta ventilatorja: EC-ventilatorji, regulirani s hitrostjo Nominalni pretok zraka na kondenzator: 8.800 m³/h Električni podatki Poraba moči v delovni točki (skupna): 24,2 kW Poraba toka v delovni točki (skupna): 43,9 A Priporočena zaščita: 2 × 63 A (CEE-priključek, redundantna) Napajanje: 400 V / 50 Hz / 3 f + N Upravljanje PLC: Siemens S7-1214C x 2 Nadzorni panel: Siemens TP900 Comfort, 9 palcev, 16,7 milijona barv x 2 Jeziki vmesnika: nemščina in angleščina Ogled Ogled naprave je možen kadarkoli v naši proizvodnji po predhodnem dogovoru. Po želji lahko napravo vključimo med ogledom, da se prepričate o njeni funkciji in učinkovitosti.

Stanje: novo, Leto izdelave: 2025, TEMP 90 W9 SSR General Information: - Maximum temperature range: 90°C water - Robust sheet steel housing - Unit mounted on castors Hydraulics: - Immersion pump (manufacturer: Speck) with pressure/vacuum function (leak stop mode) - Max. flow rate: 60 l/min - Max. pressure: 3.8 bar - Tank and heater made of stainless steel - Heating capacity: 9 kW - Tank volume: 12 litres - Brass/stainless steel fittings - Automatic water refill - Electronic level control - Indirect cooling system (plate heat exchanger) - Cooling capacity: ~40,000 kcal/h (10 plates) Dsdpsd Aarusfx Aahocl - Display pressure gauge - Integrated bypass - Solenoid valves for cooling and refill Electricals and Controls: - Electronic, self-optimizing PCB controller - Control voltage in unit: 24 V AC - Acoustic and visual alarm display - Solid state relays - Safety thermostat - Sensor break monitoring - Monitoring for hose rupture and leakage - Connection cable with plug - Dimensions: 295 x 575 x h495 mm - Weight: 40 kg

Stanje: novo, Leto izdelave: 2025, Two tables are connected in tandem operation for a combined load capacity of 5000 kg. Technical description with the following main data: Capacity: 3000 kg static distributed load Lift stroke: 800 mm Closed height: 240 mm Total height: 1040 mm Platform length: 1300 mm Platform width: 1000 mm Material: smooth sheet steel Lifting time: approx. 18 sec for full lift stroke Lowering time: dependent on load Electrical connection: 3 x 400 V / 50 Hz + protective earth, with 16 A CEE plug and 3 meter cable Motor: 2.2 kW, 1,400 rpm Solenoid voltage: 24 V DC Protection class: IP 54 overall, solenoid valve and switch IP 65 Paint finish: Steel blue RAL 5011 Dedpfek E Hmtjx Aahocl Power unit: integrated in the lift table Control box: deadman control incl. 2 m cable Total weight: approx. 330 kg Tandem control for synchronized movement. Note: 100% synchronization cannot be guaranteed. Any height differences that occur will be compensated in the base or upper position! The safety edge strips of the two lift tables are NOT interconnected. Minimum distance of 500 mm between the lift tables. Maximum distance of 3000 mm between the lift tables. Self-supporting base frame with 4 flange wheels in which the lift table is mounted. 4 ball-bearing flange wheels, wheel Ø150/175 mm, heavy-duty version, made from turned C45 steel. Height increased by approx. 50 mm.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, dolžina gredi: 1.070 mm, teža obdelovanca (maks.): 300 kg, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, laserska moč: 20 W, vrsta hlajenja: zrak, vrsta nastavitve višine: električni, dolžina območja skeniranja: 175 mm, širina območja skeniranja: 175 mm, potovalna razdalja osi X: 500 mm, pomik osi Y: 500 mm, pomik po osi Z: 350 mm, dolžina mize: 700 mm, širina mize: 500 mm, valovna dolžina laserja: 1.070 nm, temperatura okolja (min.): 15 °C, okoljska temperatura (maks.): 35 °C, vhodna frekvenca: 50 Hz, premer ekstrakcijske šobe: 50 mm, Oprema: kabina, New: SK LASER KOLLTRONIC F20iW1 – 20 W IPG fiber laser with automatic drawer system, Laser Class 1 System Concept - Complete system consisting of a fiber laser and Workstation 1 with a drawer system for productive loading and unloading. - Automatic start of the laser job when the drawer is pushed in. The laser head automatically moves out of the work area in the Z-direction at the end of the job. Workstation & Drawer System: - Seated/standing workstation with ample legroom - Aluminium housing - Bright work light, suction nozzle DN50 - Drawer system: 2 positions, max. load 300 kg (150 kg per side) - Drawer dimensions approx. H = 500 mm × W = 700 mm, electrically driven - Doors monitored by sensors, safety equipment: emergency stop, interlock, safety relay Axis System – SK LASER X, Y, Z Movement: - X-axis 500 mm computer-controlled - Y-axis 2 × 500 mm computer-controlled - Z-axis 350 mm computer-controlled (travel range depends on installation) - 2 spindles each for increased stability Dodpfx Aeyizr Sjahjcl - Axis controller - Made in Germany Laser – IPG Fiber Laser: - Diode-pumped ytterbium fiber laser - Output power: 20 W - Peak power: 1 mJ at 20 kHz - Pulse duration: 200 ns - Wavelength: 1060 – 1070 nm - Pulse frequency: 20–80 kHz - Beam quality M² < 1.6 - Air-cooled, power consumption < 400 W - Red pilot laser + 2 distance lasers (650 nm,

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, merilno območje os X: 500 mm, merilno območje osi Y: 500 mm, merilno območje os Z: 300 mm, Oprema: dokumentacija / priročnik, osvetlitev, AIM coordinate measuring centers are the technical successors of the globally deployed Mahr multisensor coordinate measuring machines. Technical specifications: Measuring range: 500 x 500 x 300 mm Dimensions: 1520 x 1040 x 2040 mm Weight: approx. 1,200 kg Max. workpiece weight: on glass plate approx. 40 kg Accuracies: U1 = 1.9 + L/200 U2 = 2.4 + L/150 U3 = 2.9 + L/100 (L = measuring length in mm) Higher accuracy available upon request Travel speed: 200 mm/s Acceleration: 400 mm/s² Scale resolution: 0.0001 mm Multisensor head (MSH): optical/tactile/laser -Includes high-precision USB camera with 2-stage zoom and telecentric optical path -Includes PTL01 TTL point laser, high-precision, telecentrically coupled -Includes Renishaw TP200 integrated tactile probing system, optionally expandable -Includes Quad-Light LED power ring light, programmable incident lighting -Includes LED transmitted light Dedpfx Aeg Ewk Reahecl -Includes Nikon precision objective 5x (optional 3x, 10x, 20x, 50x) C-mount technology -Includes calibration standard with factory calibration certificate, consisting of glass plate "circle", calibration sphere, and reference ring -Advanced PT200 CNC controller system in a robust, industrial grade control cabinet -PCI bus system for high-speed internal data transfer in real-time operation -19" retractable controller rack for optimal access during service -Modular controller concept, open for future upgrades and retrofits -Service-optimized controller design for quick access and minimized service times -Integrated 64-bit broadband bus technology with real-time data transfer -4-channel online temperature compensation ready "on board" -Active safety technology for drives, light management, and sensors -Online remote connection for remote maintenance and system check -LS circuit breakers for quick troubleshooting during service -Firmware adaptation for volumetric 3D full error compensation Includes powerful OptiCheck3D 5.0 software Commissioning, training, and start-up assistance (programming) available as an optional package!

Leto izdelave: 2023, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Naš kompaktni ekstruder model EX20-25d Proizvajalec: PMH GmbH Premer polža [mm]: 20 Dolžina polža [L/D]: 25 Hitrost vrtenja polža [min-1]: 10–192 Polž: nitriran Navor: 55 Nm Pogon: trifazni motor s frekvenčnim pretvornikom Pogonska moč [kW]: 1,1 kW Material cilindra: nitriran Električne priključne vrednosti: 3 / N / PE Napajalna napetost [V]: 400 V pri 50 Hz Krmilna napetost [V]: 24 V Keramični grelni trakovi [W]: 1200 W Dsdsq R Tkwepfx Aahocl Število grelnih trakov: 3 Maksimalni iztis: pribl. 5 kg/h Maksimalna procesna temperatura [°C]: 300

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta upravljanja: Krmiljeno s PLC krmilnikom, vrsta aktuacije: električni, Premer cevi (maks.): 100 mm, Dolžina cevi (maks.): 6.000 mm, Debelina stene cevi (maks.): 8 mm, Kot upogiba (maks.): 195 °, tlak (maks.): 250 letvica, trajanje garancije: 24 meseci, Oprema: CE označba, centralizirani mazalni sistem, hitroizmenjevalna naprava, nožno daljinsko upravljanje, nujno zaustavitev, THE ECONOMICAL MANDREL BENDING MACHINE FOR TIGHT BEND RADII This bending system offers solutions for complex geometries with standard radii of 2xD for tube dimensions from 15 to 100 mm. Depending on material quality and wall thickness ratio, radii as tight as 1.5xD can be reliably achieved in series production. With a tool height of 120 mm, there is also ample versatility for special profiles. The highly precise and powerful electric drive of the bending axis, together with the robust and rigid construction of the mandrel carrier and bending arm, ensures top-quality bending results. The plug-in bending tools enable quick setup changes for different tube sizes. The clamping pressure for the tube can be optimally adjusted. The PLC control (expandable via USB stick) with data memory and the latest X2X interface can store an almost unlimited number of programs for bending angles, length, and rotation, managing up to 50 bending steps per tube. To monitor springback values, a freely programmable database for up to 200 materials is available. The control offers two operating modes: In "Simple Bending", length and twist between the bends are automatically displayed. In "Controlled Bending" mode, data is pre-stored, and a continuous target/actual comparison is performed during bending. Also available with pneumatic rotary stop or with geared-assisted length and rotation positioning. POSSIBLE APPLICATIONS: • Plant engineering, e.g., chemical industry • Hydraulic piping • Metal construction • Prototype construction • Pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mm Bending capacity 9000: Ø 20 to 90 x 5 mm (depending on material) • Min./max. bending radius: 40 mm / 250 mm Dedpfx Aenh R Suoahocl • Min. bending radii: 1.5 x Ø (standard 2 x Ø) • Multifunctional machine control for bending angle adjustment (0.1°) • Mandrel carrier lengths: 3000 / 4500 / 6000 mm • Maximum bending angle: 180º • Weight: 1,600–3,200 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Larger bending radius up to 300 mm • Length and rotation positioning via automatic brake or manual stops using foot switch • Semi-automatic length and rotation positioning via servo motors • Automatic tool retraction • Tube calculation software • 10-inch touchscreen with integrated tube calculation • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICES: • Welcome to test production in our in-house demo room • Consulting and information session at your site • Consultation and transaction as leasing/finance purchase through JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta upravljanja: Krmiljeno s PLC krmilnikom, vrsta aktuacije: električni, Premer cevi (maks.): 54 mm, Dolžina cevi (maks.): 6.000 mm, Debelina stene cevi (maks.): 4 mm, Kot upogiba (maks.): 195 °, radij upogibanja (maks.): 250 mm, tlak (maks.): 250 letvica, Oprema: CE označba, centralizirani mazalni sistem, hitroizmenjevalna naprava, nožno daljinsko upravljanje, nujno zaustavitev, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with a free-standing bending head can be easily converted for demanding geometries to right- or left-hand bending. The plug-in bending tools enable quick changeovers to different tube sizes. Fast hydraulics to reduce downtimes is a key factor for series production. The clamping pressure for tube holding can be optimally adjusted. The PLC control system (expandable via USB stick) with data storage and the latest X2X interface can store a virtually unlimited number of programs for bending angles, lengths, and rotation angles for up to 50 bending sequences per tube. For monitoring springback values, a freely programmable database for up to 200 materials is available. The machine features two operating modes: In "Simple Bending", the length and rotation of each bend relative to each other are displayed automatically. In "Controlled Bending" mode, the data is stored beforehand, and during the bending process, a continuous target/actual comparison is performed. As a result, mispositioning within a tolerance window is ruled out and user-related error rates are minimized. General error messages are shown in full text on the large screen. The mandrel retraction is programmable and can automatically retract early when the bending angle is reached. The compact drive unit with detachable mandrel holder offers benefits for installation on site as well as for special designs with large tube feed, and is also available as a stationary version with a tool and mandrel rod organizer. The cost-effective alternative to a fully controlled CNC machine. POTENTIAL APPLICATIONS: • Hydraulic tubing installation • Pipeline construction • Plant construction, e.g. for chemical industry Djdpfx Aaeng Exaohecl • Metal fabrication • Prototype construction • Technical Data: • Bending capacity: Ø 4 to 50 x 4 mm depending on material • Bending radius min/max: 10 mm/140 mm • Minimum bending radii: 1.5 x Ø (standard 2 x Ø) • Multifunction machine control for bending angle setting (0.1°) • Mandrel carrier lengths: 1500/3000/4500/6000 mm (special versions longer available) • Maximum bending angle: 180° • Weight: 800-900 kg (depending on configuration) • Ergonomic operation via safety foot pedal OPTIONAL EQUIPMENT: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Positioning of length and rotation via automatic braking function or manual stops operated by foot pedal • Automatic length and rotation positioning via servo motors • Pneumatic rotation stop • Pipe calculation software • Laser-assisted tool monitoring for checking tool clamping force • 10-inch touchscreen with integrated pipe calculation • Bending radii up to 250 mm • Data transfer by cable (LAN), wireless (WLAN), or USB OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our in-house demonstration room • Consulting and information session at your site • Consultation and processing of leasing/financing purchases through JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance for your machine

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending of pipes up to an external diameter of 100 mm, both stationary and directly at the installation site. Transport is easy using a pallet truck or the optional rollers. A robust three-phase motor and a precision gearbox provide high-performance drive power. The machine impresses with its compact and slim design and a very open bending area. Precise position sensing directly on the bending axis ensures optimal bending accuracy. The bending angle is quickly and easily set via a convenient, menu-guided user interface in 14 languages with touchscreen control, guaranteeing highly intuitive operation. For complex bending tasks, up to 100 bending programs can be stored, each featuring a sequence of up to 8 bends per geometry. Thanks to the multifunctional control system, both forward and return bending speeds can be variably set, and an adjustable overbend function compensates for the material’s springback. With the help of four material characteristic curves, the machine automatically overbends the material to the required angle, delivering precise results. The “stationary tube, rotating tool” principle minimizes the required workspace. For thin-walled tubes, sliding shoes are used to ensure wrinkle-free bends and to achieve minimal deformation—ideal for stainless steel and copper pipes. With the PB20 profile bending attachment, flat, square, and round bars can be bent without issue. Using the small-radius bending device (KBV), extremely small bending radii are possible. POTENTIAL APPLICATIONS: • Plant construction • Hydraulic piping • Serpentine bending • Prototyping • Sanitary and heating installation • Shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material Three-phase 400 V • Bending radius up to 500 mm • Multifunctional machine control with bending angle adjustment (0.1°) • Maximum bending angle 240° • Safety foot switch with emergency stop Djdpfxondk N Ao Aahocl • Weight: 600 kg OPTIONAL ACCESSORIES: • Adapter system for tools from the 3000/6000 series, with bending radius from 45 mm, incl. 40 mm hex shaft • Profile bender PB20 – for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm • Small-radius bending device KBV • Special tools according to customer specifications • Software customization for special tasks OUR SERVICES: • Welcome to carry out test production in our in-house demo room • Consultation and information meeting at your site • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, maintenance at your site

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, vrsta upravljanja: Krmiljeno s PLC krmilnikom, vrsta aktuacije: električni, Premer cevi (maks.): 54 mm, Dolžina cevi (maks.): 6.000 mm, Debelina stene cevi (maks.): 4 mm, Kot upogiba (maks.): 195 °, radij upogibanja (maks.): 250 mm, minimalni polmer upogibanja: 9 mm, tlak (maks.): 250 letvica, trajanje garancije: 24 meseci, Oprema: CE označba, centralizirani mazalni sistem, hitroizmenjevalna naprava, nožno daljinsko upravljanje, nujno zaustavitev, THE ECONOMICAL TUBE BENDING MACHINE FOR TIGHT BENDING RADII: The tube bending machine with a free-standing bending head can be easily converted for challenging geometries to bend both right and left. Plug-in bending tools enable quick changeovers to different tube sizes. A high-speed hydraulic system to reduce idle times is a key factor for series production. The clamping pressure for holding the tube can be optimally set. The PLC control system (expandable via USB stick) with data storage and latest X2X interface can store an almost unlimited number of programs for bending angle, length measurement, and twisting angle for up to 50 bending sequences per tube length. For monitoring spring-back values, a freely programmable database for up to 200 materials is integrated. The machine offers two operating modes: In “Simple Bending” mode, the machine automatically displays the length and rotation of each bend. In “Controlled Bending” mode, the data is preloaded and during bending, a continuous target/actual comparison is performed. This eliminates incorrect positioning within a defined tolerance window, thereby minimizing user-related error rates. General error messages are shown in full text on the large display. Mandrel retraction is programmable and can be automatically retracted early upon reaching the bending angle. The compact drive unit with detachable mandrel support offers advantages for use on site as well as for special designs with very long tube feeds and is also available as a stationary version with an organized tool and mandrel rod storage system. An economical alternative to a fully controlled CNC machine. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant engineering (e.g. chemical industry) • Metalworking • Prototype construction Technical data: • Bending capacity: Ø 6 to 50 × 4 mm, depending on material • Bending radius min/max: 10 mm / 140 mm • Minimum bending radius: 1.5 × Ø (Standard 2 × Ø) • Multi-function machine control with bending angle adjustment (0.1°) • Mandrel support lengths: 1,500 / 3,000 / 4,500 / 6,000 mm (special designs available in longer lengths) • Maximum 180º bending result • Weight: 600–700 kg (depending on version) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Dodpfondn Agex Aahecl • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Length and rotation positioning via automatic brake system or manual stops via foot switch • Semi-automatic length and rotation positioning via servo motors • Pneumatic rotary stop • Pipe calculation software • Laser-based tool monitoring for clamping force control • 10-inch touchscreen with integrated pipe calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICES: • Test production in our in-house demo room • On-site consultation at your premises • Consultation and processing as lease/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance