Cisterna polpriklopnik

CRYOBASE GmbH gas tank semi-trailer for CO2 Carbon dio

Stanje: dober (rabljeno), Driven and Non-Driven Roller Conveyors SSI Schäfer • Partial accumulation roller conveyors • Various lengths available and adaptable to your individual warehouse project • Clear width: approx. 460 mm • Infeed and outfeed units available • Roller conveyor curves available Very well maintained driven and non-driven roller conveyors are available in large quantities. For further information, please refer to the attached images. The diagrams show the current configuration; of course, this can be modified as needed. We are happy to assist you with transport! Payment is accepted exclusively via: • Bank transfer • Advance payment All prices are net prices (plus VAT). Hjdpogpw Rnjfx Afwoff You will, of course, receive an invoice with VAT stated separately. Please also see our other listings. Didn’t find what you’re looking for? Don’t hesitate to get in touch with us.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2011, Used steel storage tank according to EN 12285-1 (with test certificate), double-walled, suitable for underground storage of heating oil and diesel fuels, 1 manhole (optionally also available with 2 manholes). Capacity: 100,000 litres Diameter: 2,900 mm Length: approx. 15,750 mm Weight: approx. 18,800 kg Additionally, we can equip our tanks with the following accessories: Hfjdpfx Aoi Enxdofwsf - Leak detection system with under- and overpressure leak indicators - Manhole shaft with shaft cover, available in walk-on or drive-over versions - Partition walls (for multi-chamber tanks) - Internal coatings (e.g. two-component epoxy resin), partial or full lining - Content and level measurement instruments as well as control and regulation technology - Electric tank heaters - Pumps for heating oil, diesel, biodiesel or petrol - Fuel dispensers for diesel, biodiesel and petrol – optionally with complete tank data acquisition - External tank insulation with PU foam The tank is internally cleaned, and the external coating has been overhauled and tested at 14 kV. Cost-effective delivery with our own truck possible. Simply inform us of the delivery location and you will receive an immediate quote for exact freight costs. Should you require further information, simply call us or send us an email. Trade-in and purchase of tanks/containers possible, please feel free to contact us regarding this. Delivery time by arrangement! We always have such tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 litres

Stanje: novo, Leto izdelave: 2025, Rated power at 50% duty cycle: 35 kVA Short-circuit current: 19 kA Electrode force: 300 daN / Single stroke Throat depth: 395 mm Arm span, infinitely adjustable: 140–400 mm Hedpfxjkti Hzj Afweff Electrode taper: MK2 --- Welding control: WS 708 (7-stage timer, 8-program memory) --- Incl. additional options: - Foot switch - Main switch --- 6-month warranty --- Training & commissioning available on request --- Spot welding electrodes & spare parts available from stock

Stanje: dober (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 32.518 h, stiskalna sila: 250 t, vrsta upravljanja: CNC krmiljenje, Dolžina upogiba [mm]: 3550 Tlačna sila [t]: 250 Krmiljenje: Cybelec DNC 906 PS A Delovne ure [h]: 32518 - Hidravlično hitro vpenjanje za udarno in matrico - Hidravlična CNC bombirna enota - 2-osni CNC zadnji prislon (X in R) - 4 ročno pomične prislonske prste Hsdexcmwropfx Afwoff - 2 pomični pripomočki za upogibanje - Obsežen paket orodij na voljo opcijsko

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, * Alimentación de tomate fresco en la fábrica: 2.000 toneladas/día (83.783 kg/hora) – 5º Brix * Alimentación al evaporador: 61.016 kg/hora (4º efecto) – 6,9º Brix * Descarga: 15.600 kg/hora – 27º Brix Hfjdpfxewny Iko Afwsf

Stanje: rabljeno, Leto izdelave: 2016, Overview  This complete glass bottle filling line is part of a brewery and is used for filling beer into 330 ml glass bottles with crown caps. The line comprises an automatic depalletizer for new bottles, a self-adhesive labeller, a filling triblock, and a carton packer. The entire system was installed in 2017 by Italian manufacturer Framax. The plant is still operational and can be inspected in person. All equipment remains installed and can be viewed during production. Technical details  Production capacity: 2,400 bph (at 0.33l) Last used formats: 0.33l Bottle diameter: 60mm, height adjustable 26mm crown cap Packaging: 6x4 carton Delivery scope Automatic bottle depalletizer | Framax | DEPAL SS-3000 | 2017 Automatic removal of layer pads Photoelectric sensors Self-adhesive labeller | Framax | RLA-H06-S3-L3-D480 | 2016 Three stations for three labels (front, back, neck) Date/batch code printer Counterpressure filler | Framax | Modulblock RFCI-16/16/1-DPS/C | 2016 Rated output: 3,000 bph 16 rinsing positions 16 filling positions Single-head capping unit for crown caps with cap feed system Double CO2 air evacuation Water spray system before capping to reduce residual oxygen Automatic carton packer | Framax | CP-0700-1T | 2017  Carton erector and packer With carton sealing machine Accessories such as conveyors, cooling, pumps Hfjdpfx Aett Um Rsfwjf

Stanje: novo, Bending tools / punches for Trumpf press brake Hedpfjiqxpxjx Afwjff H140mm, L500mm, L550mm, segmented

Stanje: dober (rabljeno), - Material: Stainless steel AISI 316 - Standing on legs - Tanks, top section adapted to the cellar's vaulted ceiling Dimensions: Hfedjvlkgajpfx Afwsf - Width: approx. 1150 mm - Depth: approx. 1800 mm - Total height, rear: 2500 mm - Total height, front: 3650 mm (including manhole dome) - Ground clearance: 340 mm Equipment: - Rectangular manhole 320 x 420 mm - Residue drain: tank slide valve DN 40, Friedrich No. 2 - Clear run-off: tank slide valve DN 40, Friedrich No. 2 - Sampling tap - Level indicator - Manhole dome NW 200

Stanje: rabljeno, Plate width: 7000 mm Plate depth: 5250 mm Plate height: 330 mm Weight: approx. 4400 kg Dimensions: Length: 7000 mm Width: 5250 mm Height: 330 mm The plate field consists of six clamping plates with the following dimensions: 1750 mm x 3500 mm The plates can also be purchased separately. Total area: 36.75 m² T-slot specifications: Number of T-slots: 21 T-slot spacing: 250 mm Hfodpfx Afouddfnswjf T-slot dimensions: 58 mm x 34 mm T-slot depth: 60 mm

Stanje: novo, Leto izdelave: 2024, Handheld Laser Welding System LWH-3000-N Relfar FWH20-S10A Scope of delivery: - Laser welding unit with cooling system - Welding gun with adjustable focal length and accessory kit - Fiber laser source from MAX Photonics or Raycus - Automatic wire feeder - Hose and cable set - Starter package including nozzles and protective lenses Technical parameters: - Laser power: 3000 W - Laser wavelength: 1064 nm - Welding speed: up to 120 mm/s - Power supply: 3x400 Hz - Dimensions (with head holder): 630x1300x1500 mm Included in the price: One-day operator training and machine commissioning - Day 1 (up to 8 hours): commissioning and training Relfar FWH20-S10A Welding Head – Welding, Cutting, and Cleaning Otinus laser welding units are supplied with a range of nozzles and protective lenses. This makes the unit extremely versatile and allows cost savings, for example by eliminating the need for a handheld plasma cutter and an additional device for rust and paint removal. Operation: Thanks to the revolutionary welding system, any operator can achieve high-quality results after brief training. The cable allows the welder to work freely at several positions without moving the device. The small heat-affected zone prevents excessive deformation. The weld seam is applied quickly and efficiently, resulting in a correct and robust weld. Intended Application: The laser welding device is designed for professional use in workshops requiring high-quality and aesthetically pleasing welds. Laser Source Specifications: 1000 W - Carbon steel: up to 3 mm - Stainless steel: up to 3 mm - Aluminium: 2 mm - Brass: 0.8 – 1 mm 1500 W - Carbon steel: up to 4 mm - Stainless steel: up to 4 mm - Aluminium: 3 mm - Brass: 1 mm 2000 W - Carbon steel: up to 5 mm - Stainless steel: up to 5 mm Hedpfx Afjup Uzxswjff - Aluminium: 4 mm - Brass: 2 mm 3000 W - Carbon steel: up to 8 mm - Stainless steel: up to 8 mm - Aluminium: 7 mm Design: The torch cable allows maximum freedom of movement and facilitates welding in various positions. The integrated controller with a large, clear display is intuitive to operate. The device features a high-performance cooling system, ensuring reliable operation under tough conditions, such as continuous multi-shift work. Operating Principle: The laser welding system uses laser heat to melt the welding wire and the edges of the parts to be joined. The focused beam targets the wire, which is automatically fed into the weld pool, as well as the joint area. When the trigger is pulled, the welding gun must be moved along the seam at the appropriate feed rate. A constant working temperature for both the laser source and the welding gun is maintained via a water-cooled circuit. Laser output and cooling are controlled by an onboard controller that monitors and adjusts parameters based on operator input.