Nož za luknjanje iz trdnega jekla

Richard Hess MBV GmbH Stanzmesser aus vollem Stahl

Leto izdelave: 2022, obratovalne ure: 10 h, Stanje: novo, Universal Testing Machine H5TMC Mechanical Design: according to DIN EN ISO 7500-1 2 backlash-free recirculating ball screws, driven by AC servomotor, Fmax = 5 kN, stiffness 10 kN/mm 1 test chamber up to nominal load: Test chamber width: 420 mm (optional extensions: +190 mm / +330 mm / +620 mm) Maximum test stroke without test fixtures, adapters and KMZ: 1025 mm (optional extensions: +250 mm / +500 mm) Optional: conversion to floor-standing model requires additional base table assembly Travel Speeds: Testing speed 0.001 - 2000 mm/min at full load Return speed 2000 mm/min Force Measurement: Measuring range: within 0.4 – 100% of nominal load, class 1 (optionally class 0.5) (+/- 1% of the displayed value according to DIN EN ISO 7500-1) Force measurement resolution: +/-180,000 digits at 20ms integration time The machine is delivered with a factory test certificate. Should the customer require a factory or DKD calibration at the installation site, this service will be charged separately. Traverse Travel Measurement: Incremental square-wave input with encoder monitoring, storage of crosshead position Giodjiq Hw Uopfx Afqel Resolution of crosshead travel measurement:

Leto izdelave: 2024, Stanje: novo, številka stroja/vozila: H3000-H5000TM,

Leto izdelave: 2008, Stanje: zelo dobro (rabljeno), Instron SF602 from automotive manufacturer, fully functional, but without PC Gsdpjg R Idujfx Afqeil

Leto izdelave: 2000, Stanje: zelo dobro (rabljeno), Track gauge approx. 20.0 m Lifting height approx. 8.0 m Manufacturer/Overhaul: HILGERS/TEICHMANN Conversion/Overhaul: 2000/2023 Crane equipped with: - Two-rail trolley with 4-corner rope lead-out - Magnetic system pre-installed - Radio remote control - Optional with magnet beam or spreader Gedpjqfc Egjfx Afqeil

Stanje: zelo dobro (rabljeno), Zwick Type: BZ2.5/TN1S Zwick Tabletop Testing Machine for Tensile Strength Measurement Application Area: Versatile range of uses, from testing plastics and elastomers to paper, textiles, foam, wire, and component testing. Load Frame: Maximum test force FN in tensile/compression direction: 2.5 kN Height (h1): approx. 770 mm Width with electronics unit: 320 mm Depth with electronics unit: 414 mm Working area height h min ... h max: Crosshead angle mounted upwards: 227 ... 573 mm Crosshead angle mounted rotated by 180°: 57 ... 403 mm (each without connecting bolts) Connection values: Electrical connection: 115/230 V 4/2A-1PH/PE/N Power consumption: 0.4 kVA Mains frequency: 50/60 Hz Gisdpfsfnm Dqsx Afqel Capacity: 2.5 kN Condition: used Scope of delivery: (See picture) (Specifications and details subject to change and errors!) For further questions, please feel free to contact us by phone.

Leto izdelave: 2022, Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, For sale is an FTIR spectrometer – NICOLET IS20 MID-IR DTGS spectrometer, which was used for one year as part of a research project. Operated in a laboratory environment; no damage. Giodpfxsrklx Ie Afqjl Scope of delivery: 1x NICOLET IS20 MID-IR DTGS spectrometer 1x IS20 device labeling in German 1x European Schuko power plug, 250V 1x ATR ITX BASE 1x AR diamond crystal for Smart iTX ATR 1x COMP-U-16 upgrade from 20" monitor to 24" monitor 1x iS10-iS20 transmission accessory 1x ST JAPAN ATR-FTIR polymer bundle 1x DELL OPTIPLEX 3090 MT - I3-10105 8GB Original price: €31,998.77 Sale EXW, as is

Leto izdelave: 2024, Stanje: novo, Universal Testing Machine H 5 TMNI (L) 250mm Extended Gisdpfxjiq Hxvo Afqel Mechanical design: according to DIN EN ISO 7500-1 and ASTM E4 2 backlash-free ball screw spindles, brushless drive motor, Fmax = 5 kN, stiffness 9.4 kN/mm 1 test space up to nominal load: Working space width: 420 mm Max. test stroke without test tools, adapters, and KMZ: 1270 mm Max. test space height (between lower fixed and movable crosshead) without test tools, adapters, and KMZ: 1325 mm Travel Speeds: Test speed: 0.001 – 1200 mm/min up to nominal load Return speed: 1200 mm/min Force Measurement: Measuring range depending on the force sensor used: 0.4 – 100% of nominal load, class 1 (optionally class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Force measurement resolution depending on integration time: between +/-160,000 and +/-900,000 digits. The machine is delivered with a factory test certificate. If a factory or DAkkS calibration at the installation site is required by the customer, this effort will be charged separately. Crosshead Travel Measurement: Incremental rectangular input with encoder monitoring, storage of crosshead position Resolution of crosshead travel measurement:

Leto izdelave: 2024, obratovalne ure: 4 h, Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: H2,5TMNI, Universal Testing Machine H 2.5 TMNI L Please always include your email address. Mechanical Design: Single-spindle universal testing machine with backlash-free recirculating ball screw in C-frame construction, equipped with spindle protection and brushless drive motor, Fmax = 2.5 kN. 1 Test Space up to Rated Load: Working depth: 105 mm Maximum test stroke without test tools, adapters, and KMZ: 1375 mm Maximum test area height (between lower fixed and movable crosshead) without test tools, adapters, and KMZ: 1375 mm Gjdpfx Afsmdn Troqsil Travel Speeds: Testing speed 0.005 - 1200 mm/min up to rated load Return speed 1200 mm/min Force Measurement: Measurement range depending on the force transducer used: 0.4 - 100% of the rated load, class 1 (optional class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of force measurement depending on integration time between: +/-160,000 and +/-900,000 digits. The machine is delivered with a factory test certificate. If a factory or DAkkS calibration at the installation site is required by the customer, this service is subject to an additional charge. Crosshead Travel Measurement: Incremental quadrature input with encoder monitoring, storage of crosshead position. Resolution of crosshead travel measurement:

Stanje: zelo dobro (rabljeno), Here we offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate cooling: 7.5 K/min Temperature change rate heating: 7.5 K/min Heat compensation +20°C: 3,000 W Heat compensation -20°C: 3,000 W Test chamber internal dimensions: Width 580 mm x Depth 450 mm x Height 750 mm External dimensions: Width 870 mm x Depth 1,280 mm x Height 1,575 mm Viewing window: Width 300 mm x Height 540 mm Gisdpfx Afjhh H Hioqel Test chamber volume: 190 liters Rated voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 10.5 kW Rated current: 22 A Fuse (customer side): 32 A slow-blow Sound level at 1m distance (free-field measurement): < 69 dB(A) Side cable ports: 50 cm / 125 cm Chamber is water-cooled Refrigerants: R 404A and R 23 Weight: approx. 460 kg Model: VTS 7018-5 For your safety as a buyer, please note the following information! The following work is carried out on all our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Recharge with legally compliant refrigerants 3. After successful inspection, the chambers undergo a test run monitored with calibrated instruments. Condition: Used Scope of delivery: (See photo) (Specifications subject to change or error!) Should you have any further questions, we will be happy to answer them by phone.

Stanje: novo, Leto izdelave: 2024, NEW Save real money. Recover expensive powder in just a few minutes. Model: SV-200 Type: Powder Sieve, Vibratory Screening Machine External Dimensions: 700 x 700 x 1200 mm Screen Mesh: Mesh 100 / Particle Size: 149 µm Screen Diameter: 295 mm Capacity: ~20 kg/5 min Godobwh S Sepfx Afqoil Powder Container with Fluidization Included Electric Vibrator Rated Power: 40 Watts Mains Voltage: 220-240V 50-60Hz Epoxy Powder Coatings – suitable Polyester Powder Coatings – suitable Metallic Powder Coatings – not suitable RRP: 1,230 EUR Warranty: 12 months