Ruchser Montažna Miza Ruchser Ru-Msa nakup rabljenega (6.953)

Stanje: rabljeno, Leto izdelave: 2013, Skupaj na voljo 6 kosov, cena na mizo Prednosti: - Ozka zasnova podnožja omogoča dober dostop do elementov z vseh strani - Večji razpon nastavitve površine zahvaljujoč izvlečnim romboidnim podpornim elementom - Orodja in drobni deli so vedno pri roki na odlagalni polici sestavljalnih miz - Podporni nosilci po želji prevlečeni z gumo, ščetkami, drsnimi letvami ali filcem - Brez zmede s kabli pri uporabi nosilcev naprav: stroji so vedno na dosegu na delovišču Oprema: Cgodpfx Afoyx Hpce Dsu - Delovna površina prevlečena s profilirano gumo - Na robu romboidno razporejene podpore za odlaganje profilov v vzdolžni smeri - Po višini nastavljivo 900 – 1.100 mm

Stanje: rabljeno, Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Prodajamo 2 kosa transportnih vozičkov Ruchser za profile. 12 predalov po 90 mm – brezstopenjsko nastavljivi. Širina: 850 mm, dolžina: 1900 mm, višina vozička: 1800 mm. Cgedpfx Aey Dfq Aof Dju

Stanje: novo, Number of motors: 2 units Working length: 2380 mm Control system: RUCHSER RU-GL-45° ----- Glazing Bead Saw on Sliding Work Table Developed for simultaneous cutting of glazing beads in pairs on a sliding work table The RU-GL glazing bead saw is mounted on a sliding work table equipped with sensing and clamping devices for two glazing beads. Cutting length: min. 230 mm, max. 2380 mm. Left saw is fixed, right saw is mounted on a carriage, adjustable manually. Pneumatic top and side clamping device, two-hand safety control. Saw motors 0.37 kW, voltage 400V. Sliding work table with felt pad, length including side extension 3300 mm, width 1400 mm, working height 800–1000 mm. Pneumatically lowerable counter supports for positioning window sashes. Pos. 1: RU-GL twin 45° glazing bead saw on RU-SA-3000 ----- For glazing beads up to 30 x 70 mm (W x H)!!! Mounted on the sliding work table with sensing and clamping device for two glazing beads. Cutting length: min. 230 mm, max. 2380 mm. Left saw fixed, right saw manually adjustable on the carriage. Pneumatic clamping from above and side, two-hand safety control. Saw motors 0.37 kW, voltage 400V. Sliding work table with felt pad, length with side tray 3300 mm, width 1400 mm, working height 800–1000 mm. Pneumatically lowerable counter supports for sash positioning. ----- Base price as configured above: upon request! ----- Ex works, excluding packaging, shipping, and current material cost surcharge of 6% of total price Options at a surcharge: ----- Pos. 1.1 1 set carbide-tipped saw blades for glazing bead saw RU-GL D = 200 mm, 64 teeth, consisting of 1 blade L1233 (left) and L1085 (right), special grind 43°. Surcharge: 502.00 Euro Pos. 1.2 Holder for measuring template on RU-GL for transferring measured values to the saw, with pneumatic installation. Surcharge: 635.00 Euro Pos. 1.3 Measuring gauge for glazing beads, total length 2550 mm, max. measuring length approx. 2450 mm Gauge made from square profile with 2 fixed and 2 adjustable cams for measuring glazing bead length Surcharge: 497.00 Euro Pos. 1.4 Measuring gauge for glazing beads, total length 1500 mm, max. measuring length approx. 1430 mm Gauge made from square profile with 2 fixed and 2 adjustable cams for measuring glazing bead length Surcharge: 445.00 Euro Pos. 1.5 Shim set for rebated glazing beads for RU-GLS-P45° and RU-GLS-ED45° Price on request, after review of glazing beads. Depending on the number of glazing bead types used, several shim sets may be required. To determine the exact quantity, we require profile drawings of the glazing beads before confirming your order. Surcharge: on request, after receipt of your glazing bead drawings Pos. 1.6 Operating time switching unit for standalone extraction system. Adjustable from 5 sec. to 3 hrs. Extraction operates automatically for the set time with each sawing operation. If another cut is made during the extraction period, the timer resets. Surcharge: 731.00 Euro Cgedpfx Ajxmkz Nof Deu ----- Total price ...

Stanje: novo, Working length: 2750 mm Working height: 2500 mm Lifting range of worktable: 300–1000 mm RUCHSER Glazing and Sealing Table RU-SW3-90° Vertical worktable with lifting device and turning mechanism. Particularly suitable for glazing and double-sided sealing of wooden windows. Equipment: - Support section covered with felt - Infinitely adjustable pneumatic lift, stroke from 300 mm to 1000 mm, relative to roller conveyor height - Turning device for double-sided sealing, with roller conveyor (roller length: 150 mm) - 2 pneumatic clamps for securing the window on the turning device - Special turning device allowing windows, set up on the roller conveyor, to be pushed through even while the turning device is engaged (closed) Alternative/optional features available upon request! Item 1.0: Art. No.: 100000 RU-SW3-90° Vertical Worktable for wooden windows with turning device for glazing and double-sided sealing Angle length: 1970 mm; Opening angle: 90°; Maximum working width: 2750 mm; Total length: 3050 mm; Total width: 780 mm; Reference height: 1600 mm; Support surface with felt; left OR right: one roller as edge protection for elements up to 2500 mm high. Pneumatic lifting device from 300 – 1000 mm. Footprint as roller conveyor with steel rollers, roller length and spacing: 200 mm. Total price in this configuration: on request! Options at extra cost: Item 1.1: Art. No.: 5202 EUR 773.00 each Support section with rubber rollers, Ø 48 mm, roller spacing 50 mm, for RU-SW3-90° and RU-SWS3 Item 1.2: Art. No.: 7081 EUR 440.00 each Steel angle covered with felt mounted above the roller bars for RU-SW3-90° Prevents “chattering” of the windows during pushing. The additional bars are mounted above all roller bars of the RU-S2. Item 1.3: Art. No.: 5056 EUR 147.00 each RU-AK-6 Accessory box 1000x120 mm, 6 compartments, for hanging in the roller conveyor Total price in this configuration: on request! Cgjdpfx Asxmk D Rof Dju Ex works plus packaging and shipping, plus VAT. PDF brochure attached. (Technical specifications according to manufacturer – without guarantee!)

Stanje: novo, Fitting Storage yes Working width 3000 (3500) mm Swivelling yes Ruchser RU-BM-3000 (Option: 3500) Sash Assembly Table ----- Manufacturer Description: Pos. 1.0 Item 0610000 RU-BM-3000 Sash assembly table, for sashes up to max. 2500 mm height with RU-SH, special screwdriver, length 3000 mm, width 1400 mm, work platform inclination manually adjustable. Usable width 2500 mm Holder for fitting shears or fitting punching tools. 10 swivel-mounted supports for hanging the sashes, completely pneumatically foldable for unobstructed movement of the sashes on the table surface. Device for sensing sash fitting length for constant and variable/central handle position and any handle height for already pre-drilled sashes, colour marking for fitting measurements. Support height adjustable at one stop to either 50 or 60 mm. RU-SH, special screwdriver with pneumatic depth control mounted on trolley, safety control system, pneumatic height adjustment, screw feeding device with automatic stop of the filling hopper manual feed for a second screw length at the special screwdriver, accessories. RA-8, turret stop for 8 screw levels mounted on the trolley. RA-4, support rail manually adjustable in depth to the left and right with one 4-position turret stop on each. PSF – Pneumatic clamping device for sashes against the side stops. Working height adjustable from 900 - 1000 mm. Please specify whether felt, gliding, or brush strips are required as support. Pos. 1.1 Item 6315 RU-BM-... fitting configured as per customer specification Pos. 1.2 Item 0500000 Mounting bracket matched to customer punch/ shears. For installation of a customer-supplied fitting punching tool or fitting shears (third-party make) on the sash assembly table. Please specify manufacturer when ordering!!! ----- Price RU-BM-3000 as described above ex works: on request! ----- Cedpfxet Tq Aae Af Dsgu Options for fitting storage for RU-BM-3000: ----- Variant: Fixed mounted fitting storage: Price €5,468.00 Item 0630000 RU-BL-30/30 Fixed mounted fitting storage mounted above the sash assembly table Length 3100 mm, depth 1250 mm, with 3 shelves each with 10 compartments separated by partitions. Variant: Free-standing fitting storage: Price €6,017.00 Item 0710000 RU-SBL3000/30 Free-standing fitting storage, length 3100 mm, depth 1250 mm, height 2050 mm, frame structure on the front side without supports, 30 compartments, in one row each 10 units separated by partitions and one continuous top shelf, compartment dimensions: width 280 mm, height 150 mm. 4 angle shelves for corner drives: Price €609.00 Arm length 120x120mm; angle approx. 3° Front edge of the angle is bent up 5 mm to prevent accidental unloading. 2 units left and 2 units right under the first shelf of the fitting storage. ----- Additional cost for RU-BM-3500 ----- Item 0610300 RU-BM-3500 Sash assembly table for sashes up to max. 3000 mm height with RU-SH, special screwdriver, length 3500 mm, width 1400 mm, work platform inclination manually approx. 3000 mm wide Additional cost RU-BM 3500 versus RU-BM 3000: €2,811.00 Fitting storage for RU-BM-3500 (only available free-standing): Price EUR ...

Stanje: novo, Staple length, mm Staple width (Rieker width), mm Impact energy, Nm Painting support for simultaneous painting of sash and glazing bead frame RU-LH Painting Aid for Glazing Bead Frames For processing staples L=50mm Length 700 mm, width 500 mm, working height adjustable from 700 - 1200 mm. One staple is placed at each of the 4 corners of the glazing bead frame. Positioning is done diagonally so that the staples protrude approx. 35 mm from the wood. When pressed into the sash frame, a clamping action is created. During painting, the glazing bead frame is placed approx. 20 mm in front of the sash. After drying or before sash assembly, the glazing bead frame is pressed flush into the sash and then removed again before glazing. The staples can then be pulled out by hand. Stand frame with support table, vertical at 85°, tiltable. 2 compensation frames for different glazing bead thicknesses, operated via foot pedal. Price on request plus packaging and shipping Optional at a surcharge: Pack of staples 26 x 50 mm, 4,300 pieces each EUR 77.00 Images of the painting aid can be found at the end of the adjacent video! Cgedpfsxpi Efox Af Dou (Technical specifications according to manufacturer – subject to change without notice!)

Stanje: novo, Dimensions (L x W): 1400 x 1750 mm Weight: — kg Tiltable: yes/no yes RUCHSER Assembly Tilting Table RU-MKS 1.4 ----- Versatile work table, e.g., for frame assembly, roller shutter box assembly, muntins, sash fittings, glazing Cgedpfox H Al Asx Af Deu Standard and optional equipment available upon request! Pos. 1.0: Item no.: 8820000 RU-MKS-1.4 Assembly Tilting Table Basic dimensions: 1400 x 1750 mm, extended: 3400 x 2500 mm Support surface with 3 support rails, 2 of which are adjustable, one permanently fixed to the upper extension, with felt covering. Support surface features width and height/depth extensions. Pneumatic tilting mechanism, load capacity 130 kg. Operated by foot valve. Gravity roller conveyor manually foldable and extendable sideways from 1400–2500 mm, roller length: 140 mm (closed). Roller conveyor height adjustable in vertical table position from 300–380 mm, working height horizontally adjustable from 920–970 mm. !For safety reasons, at least one flat clamping cylinder must be ordered! Pos. 1.1: Item no.: 5582 Pneumatic swivel device for roller conveyor for MKS Pos. 1.2: Item no.: 21127 Support rail 1400 mm, non-extendable, for RU-MKS Pos. 1.3: Item no.: 5585 360° rotating device with pneumatic locking in 180° increments Rotation brake with actuation from both sides When the rotating device is used, the minimum roller conveyor height of the MKS table increases to 330 mm Pos. 1.4: Item no.: 6455-01 6 storage boxes, each with 2 compartments, mounted swivel-type; for RU-MKS Pos. 1.5: Item no.: 5597-10 Travel carriage for semicircular track for RU-MKS-P4 Operated by foot valve, mounted on roller conveyor side. Pos. 1.6: Item no.: 6354-6 3 double-meter semicircular tracks, 30 x 10 mm. Pos. 1.7: Item no.: 5193-1 Flat clamping cylinder with hand valve, clamping range 130 mm, retractable mounted on support rail, with felt on contact part, can be mounted left or right — please specify. Pos. 1.8: Item no.: 5584 Lifting unit 450 mm for work on vertically positioned elements. Operated by foot valve. Maximum load capacity: 200 kg for RU-MKS...-1.4, 140 kg for RU-MKS...-2. Pos. 99.1 Pallet packaging ----- Total price for this version: on request! Video and PDF brochure attached. (Technical data as per manufacturer — subject to change without notice!)

Stanje: novo, Number of motors: 2 units Working length: 2650 mm Control: manual Ruchser RU-GLS-ED 45° Glazing Bead Saw ----- Designed for twin cutting of glazing beads The RU-GLS-ED45° double glazing bead saw is set manually to the required size. The machine is designed for twin cutting glazing beads at a 45° cutting angle and features one fixed and one movable saw unit. The manual length adjustment comes equipped with an electronic digital display. Cutting lengths from 150 mm to 2650 mm are possible. During cutting, the glazing beads are held securely from above and the front by a pneumatic clamping system to prevent tilting. Operation is via a safety two-hand control. Saw blade diameter: 250 mm, Length: 3700 mm, Width: 700 mm, Voltage: 400 V. Item 1: RU-GLS-ED45° Double Glazing Bead Saw ----- With manual dimension adjustment, for twin cutting of glazing beads, cutting angle 45°. Manual length adjustment with digital electronic display, cutting length 150–2650 mm. Pneumatic clamp from above and front. Safety two-hand control, saw blade diameter 250 mm, length 3700 mm, width 700 mm, voltage 400 V. ----- Base price for the above configuration: on request! ----- Ex works. Packing and shipping extra. Options at extra charge: ----- Item 1.1 Spacer set for rebated glazing beads for RU-GLS-P45° and RU-GLS-ED45° Price on request, depending on assessment of the glazing beads. Depending on the number of glazing bead types, several spacer sets may be required. To determine the exact quantity, we need profile drawings of the glazing beads prior to order confirmation. Surcharge: on request, after receiving your bead profiles. Item 1.2 Mounting device for template gauge on RU-GL for transferring measured values to the saw with pneumatic installation. Surcharge: 611.00 EUR Item 1.3 Measuring gauge for glazing beads, total length 2550 mm, max. measuring length approx. 2450 mm Measuring gauge made of square tube, with 2 fixed and 2 adjustable cams for measuring the glazing bead length Surcharge: 478.00 EUR Item 1.4 Measuring gauge for glazing beads, total length 1500 mm, max. measuring length approx. 1430 mm Measuring gauge made of square tube, with 2 fixed and 2 adjustable cams for measuring the glazing bead length Surcharge: 428.00 EUR Item 1.5 Operation time switch for independent extraction system. Adjustable from 5 sec. to 3 hrs. For each sawing operation, the extraction runs for the preset time. If another cut is made within this period, the extraction time restarts. Surcharge: 702.00 EUR Cgodpfoxmk Dqjx Af Dju Item 1.6 1 set carbide saw blades RU-GLS-P45 and RU-GLS-ED45° D = 250 mm x 3.2/2.2 x 30, 80 teeth, comprising 1 saw blade L6444 (right) and L6443 (left) with special 43° grind. Surcharge: 576.00 EUR ----- All prices in euros, net, plus statutory VAT. (Technical data per manufacturer, subject to change without notice!)

Stanje: rabljeno, Dimensions (L,W), mm Weight approx. 90 kg Height adjustable (yes/no): yes Lift 300 - 800 mm Worktable surface area 1,700 x 1,500 mm Max. table width 3,800 mm Payload approx. 130 kg Ruchser RU-4-SSP rotary-tilting table ----- Support surface 1700 x 1500 mm, maximum table width when extended 3800 mm, pneumatically tiltable, weather leg recess, with 6 storage boxes each with 2 compartments, pull-outs underneath for widening, with 2 support feet and 2 flat clamping cylinders, lifting device from 300 - 800 mm, roller conveyor as setup surface, can be folded down. Load capacity 130 kg. Travel unit with 4 swivel castors with locking device (RU-4SSP) 2 stops for final inspection and sealing Wing assembly fixture with tool tray and adjustable stop for angled positioning for RU-4-SSP Cgsdpfsvu Hfdox Af Deu Holder for drill, screw gun, etc. with screwdriver holder Travel unit with flanged rollers RU-DKFA and RU-4SSP 3 double metre travel rail for the travel unit 25 x 10 mm ----- Price for the above-mentioned machine on request! plus packaging and shipping ----- (Technical data according to manufacturer's info - without guarantee!)

Leto izdelave: 2013, stanje: rabljeno, Naprava omogoča nalaganje profilov na stroje, kot so dvosmerne kotne žage, stroj za laminiranje, stroji za ojačitev, podajalni magazini, obdelovalni centri itd., s strani ene osebe. Cgodpfexykvgjx Af Dju

Stanje: dober (rabljeno), Leto izdelave: 2010, Dvigalo za materiale, pripomoček za polaganje, montažno dvigalo, Superlift Contractor, dvižno dvigalo, transportni trak, tračni transporter, transportni trak; naprava omogoča, da ena oseba sama polaga profile na stroje, kot so dvojnoročne žage, linije za foliranje, stroji za ojačitev, podajalni magazini, obdelovalni centri itd. -Proizvajalec: Ruchser, pripomoček za polaganje tipa RU-AH -Nosilnost: 30 kg -Dvižna višina: 345 do 1080 mm -Transportni trak: Krups KF30 -Transportna dolžina: 2200 mm Cedpfxsyapgle Af Dogu -Širina traku: 75 mm -Hitrost: frekvenčno regulirana 8 - 50 m/min -Dimenzije: 2220/1000/H1370 mm -Lastna teža: 216 kg

Stanje: rabljeno, Montažna miza, delovna miza z T-utori, varilna miza, miza s T-utori, plošča s T-utori, rabljeni stroj Skupne dimenzije: 4020 x 1720 x 410 mm Dimenzija utora: 65x55 mm Csdpfsy A N T Ssx Af Djgu

Stanje: rabljeno, Miza z T-utori, montažna miza, delovna miza, ravnalna miza, rabljeni stroj Skupne dimenzije: Širina: 2690 mm Cjdpfx Ajy Udfajf Dsgu Globina: 660 mm Višina: 165 mm Teža: 1415 kg

Stanje: rabljeno, Delovna miza, montažna miza, delovna miza, rabljeni stroj Skupne dimenzije: Cjdpfjy Tb Atex Af Degu Širina: 6400 mm Globina: 1880 mm Višina: 400 mm

Stanje: rabljeno, Schmid nagibna montažna miza 12x3 m z vzdolžnimi valji, naprava brez hidravlične enote Codpfxoy Afp Ae Af Dsgu

Stanje: rabljeno, Condition: NEW with pneumatic clamping device. The universally applicable assembly station for the production of wall, ceiling, and roof elements in timber frame construction. - Heavy-duty base frame construction for a level working surface. - Clamping of elements using 9 system clamping beams with pneumatic pressure cylinders. The system clamping beams are extendable for element heights from 100 to 3,800 mm. Cylinder stroke is 320 mm, clamping force per cylinder approx. 420 kg/4,200 N at 10 bar operating pressure. Clamping can be done in two groups: 5 and 4 pieces, allowing two elements to be clamped/worked simultaneously. - Working surface paneling with wooden boards as far as technically possible. (Optional perforated sheet panel available, as shown in the photo) - Stop system at the bottom with 9 plug-in pins and at the side with 7 plug-in pins for dimensionally accurate elements. - Tilting mechanism for the assembly station using 3 hydraulic cylinders for element weights up to 4,000 kg to 85° (95°). The hydraulic system is compactly integrated into the frame area of the assembly station. - The electrical control cabinet is also securely installed beneath the assembly station. - Operation of all functions via control pendant. - Compressed air connection and socket installed at both stationary ends, and on the station’s lengthwise side, 2 sockets and 2 compressed air connections are provided for attaching hand tools. - The stations are built on a modular principle, making it possible to expand with a receiver station, Cedswv Tqbspfx Af Djgu forming a complete turnover station, either immediately or later. A turnover station can be seen in Photo 3. - Additional options: assembly table without tilting function, perforated sheet panels, other working dimensions upon request Working area: - Max. element size (W x H): 12,000 x 3,800 mm - Min. element size (W x H): 1,000 x 100 mm - Clamping cylinder stroke: 320 mm - Stop/plug-in pin height: 120 mm - Working height: approx. 700 mm - Color: RAL 7035 light grey

Stanje: novo, Leto izdelave: 2026, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 6.100 mm, skupna širina: 3.600 mm, BOOSTON MACHINERY is a manufacturer of machinery and equipment for house prefabrication plants. We produce fixed assembly tables, rotating tables, butterfly tables, as well as complete production lines. TECHNICAL DATA -> Working length of the table: 6000 mm; other available lengths: "3.0 m; 4.5 m; 6.0 m; 7.5 m; 9.0 m; 10.5 m; 12 m; 13.5 m; 15.0 m" -> Working height of the table: 700 mm (adjustable +/- 50 mm) -> Working width of the table: 3600 mm (customization possible) -> Prefabricated wall height range with SD-01 pneumatic clamping cylinder: 600–3400 mm -> Vertical locking pins: 120–200 mm (diameter 35 mm) -> Horizontal transport of finished elements (optional): Set of pneumatically lifted rollers (2 roller lines at table sides) -> Table drive: Fixed table -> Pneumatic supply – 8 bar for ER-02R version (with rollers for horizontal transport) -> Maximum allowable load – 1 m² of finished prefabricated element (assuming max height of 3000 mm): 100 kg/m² Cgodpfxsvv Rv Ae Af Deu ADDITIONAL OPTIONS 1. SD-01 pneumatic clamping cylinders 2. Set of pneumatically lifted roller lines integrated into tabletop (2 lines) ER-02 Fixed Assembly Table – a universal workstation for prefabrication of timber frame elements. The modular design of the working platform allows for expansion and integration with other rotating tables to create a complete production line. The fixed assembly table is available in lengths from 3 m to 15 m, with a standard working width of 300 cm plus a 60 cm steel extension, enabling prefabrication of elements up to 340 cm high when using SD-01 clamping units.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Montažna miza EDER+MULLER Codpfx Ajy Simqef Djgu

Stanje: rabljeno, Clamping plate, machine table with metal substructure Clamping table, assembly table, clamping angle Clamping surface: 1200 x 370 mm T-slot spacing: 90 mm Table height: 870 mm - The slotted table was originally a machine table from a milling machine - 4 T-slots, 16 mm - Metal substructure with height-adjustable feet - Multiplex board, L x W x H: 1200 x 400 x 18 mm Overall dimensions (L x W x H): 1400 x 770 x 870 mm Weight: 250 kg Good condition Codpfxjwkvi Ne Af Dsgu

Stanje: novo, Work and Assembly Table New machine Year of manufacture: 2023 The ergonomic work and assembly table ErgoPlan EP1 comes equipped with a workbench top made of selected, solid beechwood. The surface is waxed and polished. The infinitely adjustable height adjustment under load operates smoothly and precisely—even with asymmetrical loading of the worktop. TECHNICAL DATA Workbench top without vises: 1,700 x 640 x 120 mm 2 vise spindles: Front vise made from solid cast/steel construction, rear vise with robust aluminum box guide (with adjustable guide prism and plastic glide guidance) Worktop thickness: 120 / 60 mm Useful stroke: 300 mm ErgoPlan build height: 780 mm Weight of the workbench top: approx. 95 kg Total weight: approx. 240 kg Rear-mounted panel serves as a protective cover against shearing and as a pinch protection cover. The lifting unit is concealed in the left lift column, thereby protected against dirt and damage. Load capacity: up to 400 kg Maximum overall height: 1,080 mm 2 ErgoPlan bench dogs consisting of aluminum round bench stops with ball locking mechanism, 30 mm diameter, 200 mm length 1 vertical clamp for workpiece fixation from above, with 1 indexing pin, adjustable up to 200 mm workpiece thickness, 360° rotatable Csdpfx Aokwhwzjf Degu Availability: short-term Stock location: Flörsheim

Stanje: novo, Work and Assembly Table Worktop made of solid sheet metal, equipped with a high-quality workbench (can be removed via screws) Ergonomic, back-friendly operation thanks to height adjustment via foot pedal Perfect alignment using the 4 adjustable feet, easily set with a hex key Infinitely variable height adjustment and 3 fixed working heights Optimal maneuverability due to 4 swivel castors with parking brakes Quality from the region Confidence in our product – 5-year warranty Load capacity: 300 kg Height: 400 – 1010 mm Worktop length: 1485 mm Worktop dimensions: 1700 x 790 mm Lifting stroke: 610 mm Weight: 140 kg Cgodpjvymfhefx Af Dou Front vise: 520 x 70/190 mm (size/opening) Side vise: 460 x 140/145 mm (size/opening) Availability: short-term Location: Flörsheim

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, višina zlaganja: 100 mm, skupna masa: 350 kg, skupna širina: 810 mm, skupna višina: 1.060 mm, skupna dolžina: 2.540 mm, vhodna napetost: 220 V, vhodna frekvenca: 50 Hz, PFi Blade B3+ Specifications: Working area: 210 x 297 mm – 400 x 600 mm Paper weight: 120 – 400 g/m² (depending on tool used) Cutting thickness: up to 1.3 mm Cutting speed: up to 800 mm/second Cutting tolerance: +/- 0.3 mm Blade material: tungsten steel Feeder: stack feeder with 5 combined lifting and drag suction cups Stack capacity: 100 mm Control systems: CCD camera Power supply: 220 V, 50 Hz, 20 A, 4 kW Dimensions (L x W x H): 2,540 x 810 x 1,060 mm Weight: 350 kg The machine has been workshop-overhauled, with maintenance carried out according to the manufacturer’s specifications. Cjdpfjwlhbaex Af Degu Warranty: 6 months. The machine is available ex-stock in Renningen, near Stuttgart. Optional shipping within Germany subject to negotiation. Installation and on-site training within Germany negotiable. A maintenance contract is available.

Stanje: pripravljen za uporabo (rabljen), Innotech ZGW F25 končna montažna postaja, montažno delovno mesto, delovna postaja, delovna miza Hermes A4L tiskalnik etiket UV svetilka Cedex Hwciopfx Af Dsgu Povečevalno steklo z lučjo PC, monitor, tipkovnica Vabljeni ste na ogled. Na vašo željo lahko organiziramo tudi ugoden prevoz! Prejmete ustrezen račun. Za tuje stranke lahko izdamo račun brez DDV. Pogoj je veljavna ID za DDV. Prodaja vmes pridržana. Obiščite našo trgovino in si oglejte še ostale ponudbe. Omenjena imena podjetij in blagovne znamke so last njihovih imetnikov in služijo izključno za identifikacijo in opis izdelkov. Možne so razlike v tehničnih podatkih in napake v opisu predmeta.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, NEPOSREDNO OD PROIZVAJALCA – brez posrednikov Cgodpfxel D Nkzj Af Dju ENOKRILNA VRTLJIVA MIZA s pnevmatskim pogonom, dolžina 7,5 m Ponujamo z veseljem našo montažno mizo za prefabriciranje – enokrilno 'butterfly' mizo – model ER-01P/750 z dolžino 7,5 metra, posebej zasnovano za učinkovito in natančno prefabrikacijo sten, stropov in streh. TESARSKA/MIZARSKA MONTAŽNA MIZA ZA PREFABRICIRANJE * Pnevmatski pogon – delovni tlak 7–9 BAR * Dovoljena obremenitev: 50 kg/m² (npr. pri 7,5 m dolžine – 1125 kg) * Jeklena konstrukcija s prašno barvanim premazom * 15 mm vezana plošča * Vrtine za montažo pritrdilnih cilindrov na vsakih 150 mm * Odstranljivi zaporni zatiči z nastavitvijo višine * Modularna zasnova z možnostjo razširitve * Možnost opremljanja s transportnimi kolesi TAKOJ NA VOLJO – Pošiljanje v vse države EU

Stanje: novo, Leto izdelave: 2025, Nov sestavniški oder z nastavljivimi nosilnimi drogovi COMALL JOB 15/3000 Tehnične specifikacije: Cgedpjgiud Refx Af Dou - Kontaktne površine iz poltrde sive PVC mase - Nosilnost: 180 kg - Štirje vzdolžno drseči nosilni drogovi z vpenjalnim sistemom z ročajem - Pnevmatski sistem z dvema pnevmatskima priključkoma - Škatle za pripomočke, 6 kosov - Razširljivo držalo, opremljeno z dvema vzdolžno drsečima drogoma