SpenjalnikiRUCHSER
RU-LH Lackierhilfe Video
Spenjalniki
RUCHSER
RU-LH Lackierhilfe Video
Stanje
Novo
Lokacija
Aalen 

Prikaži slike
Prikaži karto
Podatki o stroju
Cena in lokacija
- Lokacija prodajalca:
- Elisabethenstr. 41, 73432 Aalen, Nemčija
Klic
Podrobnosti ponudbe
- ID ponudbe:
- A20324100
- Št. reference:
- 1305-6393
- Nazadnje posodobljeno:
- dne 17.10.2025
Opis
Staple length, mm
Staple width (ridge width), mm
Impact energy, Nm
Painting aid for simultaneous coating of sash and glazing bead frame
RU-LH Painting aid for glazing bead frames
For processing staples L=50mm
Length 700 mm, width 500 mm, working height adjustable from 700 - 1200 mm. At each of the 4 corners of the glazing bead frame, one staple is set. Positioning is done diagonally so that the staples protrude approx. 35 mm from the wood. When pressed into the sash frame, a clamping effect is achieved. For painting, the glazing bead frame is positioned with approx. 20 mm clearance in front of the sash. After drying or before sash installation, the glazing bead frame is pressed flush into the sash and removed again only before glazing. The staples can then be manually pulled out. Stand frame with support table, vertically adjustable to 85°, inclination adjustable. 2 spacer frames for different glazing bead thicknesses, operation via foot pedal.
Price on request plus packaging and shipping
Option at extra cost:
Box of 26 x 50 mm staples, 4,300 pcs per box
EUR 74.00
Kdjdpfoxpi Efox Ah Dsu
You can find recordings of the painting aid at the end of the adjacent video!
(Technical specifications as per manufacturer – subject to change and without guarantee!)
Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.
Staple width (ridge width), mm
Impact energy, Nm
Painting aid for simultaneous coating of sash and glazing bead frame
RU-LH Painting aid for glazing bead frames
For processing staples L=50mm
Length 700 mm, width 500 mm, working height adjustable from 700 - 1200 mm. At each of the 4 corners of the glazing bead frame, one staple is set. Positioning is done diagonally so that the staples protrude approx. 35 mm from the wood. When pressed into the sash frame, a clamping effect is achieved. For painting, the glazing bead frame is positioned with approx. 20 mm clearance in front of the sash. After drying or before sash installation, the glazing bead frame is pressed flush into the sash and removed again only before glazing. The staples can then be manually pulled out. Stand frame with support table, vertically adjustable to 85°, inclination adjustable. 2 spacer frames for different glazing bead thicknesses, operation via foot pedal.
Price on request plus packaging and shipping
Option at extra cost:
Box of 26 x 50 mm staples, 4,300 pcs per box
EUR 74.00
Kdjdpfoxpi Efox Ah Dsu
You can find recordings of the painting aid at the end of the adjacent video!
(Technical specifications as per manufacturer – subject to change and without guarantee!)
Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.
Dokumenti
Ponudnik
Opomba: Brezplačno se registrirajte ali prijavite, za dostop do vseh informacij.
Registriran od: 2002
Pošlji zahtevo
Telefon & Faks
+49 7364 ... oglasi
Vaš oglas je bil uspešno izbrisan
Prišlo je do napake