Montažna miza z nastavljivimi palicami

COMALL JOB 15/3000

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, HOLZ-HER Edge Banding Machine ACCURA 1558 performance with BELT BRIDGE and intelligent equipment package for edge thicknesses up to 15 mm. Easy program changeover and tool adjustment via the 18.5” 16:9 color touchscreen display. Short glue system heat-up time with the GlueJet (GJ 301 automatic): approx. 2 to 3 minutes, depending on glue type and ambient temperature. Always fresh glue thanks to the GlueJet adhesive application system and glue cartridges. Changing PUR adhesive and cleaning the system is effortless and can be done within minutes. Axis adjustment via high-precision, repeatable servo motors. Special configuration for materials with protective foils, such as high-gloss and supermatt surfaces! One of the absolute highlights of this machine is the multifunction package, ideal for workshops processing a wide variety of edge types. The DIA tooling features multi-stage design, allowing switching between radii and chamfers as needed – from longitudinal milling to corner copying and profile scraping. The extendable workpiece support and extended feed-in section with air cushion table make handling large workpieces easier. A guidance system assists with feeding small workpieces into the machine. Edge thickness for coil material: 0.4 – 3 mm (material-dependent) Edge thickness for strip material: 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Minimum workpiece width: 65 mm Feed speed: 10 – 25 m/min Glue application via GlueJet for both EVA and PUR quality adhesives, with minimal effort. Compatible with all standard edge types, including high-gloss, supermatt, and solid wood edges up to 15 mm. Motorized adjustment of the infeed guide fence Narrow-part guidance system Prepared for connection to a RETURN system Motor-driven pressure bridge with upper belt drive Multifunction units for quick setup of radius, flush, and chamfer operations Vertical & horizontal spray systems And much more. Delivery, installation, and operator training of the machine can be arranged directly through us for an additional charge. The machine is currently located at our dispatch warehouse in Gratwein, Austria. In case of discrepancies between the German version and a foreign-language version, only the German version is legally binding. Prodpjyfgrpofx Al Djb Our General Terms and Conditions can be found on our website at holzher.de/de/agb.

Stanje: zelo dobro (rabljeno), Stroj za kotno spajanje Pressta 4000 Psdpfx Ael Skl Dsl Djrb poštnina v EU ~350 evrov

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, - Leistung (kW): KFB 353 = 1,5 - Spannung (V): 400 - Luftdruck (bar): 7 - Luftverbrauch (l/min): mind. 250 - Drehzahl der Welle (min⁻¹): KFB 353 = 12.000 - Maximale Werkstückquerschnitt WxH (mm): 190 x 111 Psdpfx Aowzivdjl Derb - Fräsbereich L x B (mm): 300 x 130 - Frästiefe (mm): 200 - Maschinenabmessungen L x T x H (mm): 3.500 x 820 x 1.650 - Gewicht (kg): ca. 420 - Bearbeitbares Material: KFB 353 = PVC- und Aluminiumprofile

Stanje: novo, Leto izdelave: 2024, Système automatique de mesure de longueur et de positionnement pour toutes les scies à tronçonner STROMAB ainsi que pour toutes les machines similaires d’autres fabricants. Il sert à la fois de butée et au positionnement des pièces. Composé de: Profilé en aluminium 105 x 90 mm, anodisé Entraînement par courroie crantée 32 mm, renforcée avec fil d’acier Moteur pas à pas 6 Nm, multi-tension 115-230 V – 50/60 Hz Précision de répétition +/- 0,1 mm Vitesse de positionnement 60 m/min. Commande Type SMART 7 avec écran tactile 7 pouces Mode d’usinage absolu et incrémental 8 valeurs standards préréglées 2 versions logicielles avec différents niveaux d’optimisation optionnellement disponibles. ZM 415 – Longueur de travail utile 4.500 mm ZA333 – Table à rouleaux 4.500 x 280 mm, diamètre rouleaux 32 mm ZA341 – Support frontal 4.500 x 260 mm Predpfoxraucsx Al Djb ZA373 – Câble de verrouillage pour scie à tronçonner existante

Stanje: novo, Measuring lengths: up to 5700 mm Tube length: 6000 mm Number of supports: 7 Material: stainless steel tube Predefv Atlspfx Al Dsb Dimensions (L x W x H): 6.0 x 0.3 x 0.2 m The length measuring system is available as a retrofit for existing roller conveyors in lengths ranging from 2 to 6 meters. The guide rail is made from rectangular tube 60 x 30 x 3 mm. The steel measuring tape is self-adhesive. The magnifier with 6x magnification facilitates precise adjustment to the desired length. Note: This offer is for the stop system only, without roller conveyor!

Stanje: novo, Leto izdelave: 2023, BERG+SCHMID krožna žaga iz aluminija, model VELOX 350, ročna, regulirana hitrost: 1800+3.600 vrt/min • Naklon desno in levo 45° • Naklon glave do 45° (nastavljiv) • Vrteča miza s krogličnimi ležaji • Osnova stroja • Najvišja kakovost reza zaradi dušenja vibracij • Zelo miren potek reza Pjdpfx Asr Ilktol Djrb • Enostaven zagon in visoka zmogljivost • Podstavek stroja s predalom za žagovino Dimenzije žaginega lista: 350x32 mm Dodatna oprema, kot so žagini listi, valjčni transporterji, merilni vodila, minimalno mazanje itd., je na voljo na zahtevo! Dobavni rok: iz skladišča Waiblingen Beinstein.

Stanje: novo, Leto izdelave: 2026, Crosscut and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, but without saw blade The machine can be tilted via a handwheel and worm gear (rear) Saw blade diameter: 520 mm, saw blade bore: 50 mm Saw blade speed: 2,800 rpm 400 volt / 5 kW (S6/40%) motor with brake and automatic star-delta starter Predpfx Aloi Dfido Djb Cutting width at 90°: 420 mm Cutting width at 45° (swivelled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm The saw can be swivelled to one side up to approx. 25 degrees for acute angles and tilted to the left up to 30 degrees Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Tubend aluminium circular saw / under-table saw AC 550 Special equipment included in the price: - Pneumatic vertical and horizontal clamping via 4 clamping jaws - Infinitely variable saw blade feed - Minimum quantity lubrication system - 3m roller conveyor Description: Saw blade diameter: 550 x 32 x 4 mm Speed: 3580 rpm Cutting capacity at 90° (rectangular): 260 x 200 mm Cutting capacity at 90° (square): 155 x 155 mm Cutting capacity at 45° (rectangular): 180 x 200 mm Cutting capacity at 45° (square): 130 x 130 mm Operating pressure: 6 – 8 bar Podpfx Aokckx Uol Dsrb Operating voltage: 380 V Total power requirement: 3 kW Machine weight: approx. 250 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. Predpsh Ek Dasfx Al Djb For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: rabljeno, Leto izdelave: 2011 Predpfsyw Rx Eex Al Deb Avtomatski linijski varilni stroj za PVC profile (ali podobne materiale), s popolnoma PLC-kontroliranim ciklom Stroj je v popolnoma delujočem stanju, redno letno vzdrževan, priložen je uporabniški priročnik. - Delovni cikel: PLC z digitalnim nadzorom temperature ter intervalov varjenja/hlajenja prek zaslona. - Nastavljive podporne roke za profil, kar omogoča lažji položaj in varnost operaterja.