Delovna in montažna miza

Beck Ergoplan EP 1

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Rabljeni stružnica TOS SUI 50 - 1500 s številnimi dodatki naprodaj Prodamo robusten in natančen stružnica TOS SUI 50 - 1500 – idealen za delavnice, obdelavo kovin in izkušene mojstre. 🔹 Razdalja med konicami: 1500 mm 🔹 Premer struženja nad posteljo: 500 mm 🔹 Hitrost vretena: 14 – 2240 vrt/min 🔹 Vrtina vretena: 56 mm 🔹 Dimenzije (DxŠxV): 3000 x 1300 x 1500 mm 🔹 Teža: približno 2,9 tone ✅ Stroj je rabljen, a tehnično v dobrem stanju in takoj pripravljen za uporabo. Kodpfx Afjwu Dn Ie Tjdg 📍 Lokacija: Werdau 📅 Možen ogled – preprosto se dogovorite za termin! Za več informacij pišite ali pokličite.

Stanje: novo, The SSB F 60 Super VT PRO is a powerful pillar drilling machine that is perfectly suited to the demands of workshops. This machine combines state-of-the-art technology with robust design, making it ideal for single-item and small-batch production, as well as for drilling, countersinking, reaming, and thread cutting. Thanks to the electronically controlled servo quill feed and the large touchscreen control display, users benefit from user-friendly operation and flexible adjustment of machining parameters. Featuring a sturdy construction made from high-quality cast iron and a motorized height-adjustable table that swivels ± 45°, the SSB F 60 Super VT PRO is excellently suited for use in steel and hall construction. Additionally, the machine offers an impressive drilling capacity of up to 60 mm and an automatic threading cycle, enhancing efficiency. Take the opportunity to acquire the SSB F 60 Super VT PRO for your projects—request a quote and experience KNUTH quality! Kdedpfx Aeq Rdqnjf Tsg

Stanje: novo, Leto izdelave: 2022, Power: 1.1 kW Drilling capacity steel / continuous drilling capacity: 30 mm / 25 mm diameter Speed range: 120 - 1810 rpm Ksdpfx Afogulr Ho Tedg Speed steps: 9 Spindle taper: MT-4 Drilling stroke: 120 mm Spindle reach: 254 mm Table size: 475 mm x 425 mm Drill table tilt/swivel: 45° left / 360° Column diameter: 80 mm Quick-action chuck: 1 - 16 mm Weight: 132 kg

Stanje: novo, Delivery pressure: 10 bar Effective delivery rate: 252 L/min Tank capacity: 90 l / bar Number of cylinders: 1 unit Motor: 400 Volt / 1.5 kW Speed: 777 rpm Kdedpfx Afevkizto Tog Machine weight: approx. 70 kg Dimensions (L x W x H): 0.97 x 0.5 x 0.9 m

Leto izdelave: 2022, Stanje: novo, Altendorf WA 6 Manual height adjustment, Double roller carriage, length 2000 mm Scoring unit, tiltable, Extension table, Mitre fence, automatic brake, can be lowered below table height ----- Technical data ----- Tilting range: 0 - 45°, Cutting width at rip fence: 1,000 mm, Maximum cutting height: 87 mm, Maximum saw blade diameter: 315 mm, Mitre fence tilting range: up to 49°, Speeds: 4,200 rpm, Main motor power: 5.5 HP / 4 kW, Scoring motor power: 0.5 HP / 0.37 kW, Working table height: 910 mm, Extraction port diameter: each 1 x 100 / 50 mm, Weight: 450 kg Large extraction hood Location: Available from stock 54634 Bitburg Kdodpeihahmefx Af Tog - immediately available - Location: Available from stock 54634 Bitburg - free loaded - - immediately available -

Stanje: rabljeno, Leto izdelave: 2021, Traverse paths (X, Y, Z): 4062, 2,922, 660 mm Number of spindles, vertical drilling head: 13 pcs. Number of spindles, horizontal drilling head: 6 pcs. Number of tools: 27 pcs. Number of milling units: 1 pc. Working area: 3200 x 1500 x 200 mm Motor power: 12 kW CNC control: BECKHOFF MASTERWOOD Project 385 (Winner) ----- Exhibition machine, year of manufacture 2021, available immediately with manufacturer’s new machine warranty! 5-axis CNC machining center in portal design, suitable for interior fittings, doors, stairs, optionally expandable with solid wood clamps for frame processing and arched windows Brief summary: ----- Working area: X = 3200 mm; Y = 1500 mm; Z = 200 mm 1 piece 5-axis high-performance spindle, 12 kW, with HSK 63 F interface 1 piece fixed drilling head with 19 spindles with 7 individually selectable vertical drilling spindles in X-direction with 6 individually selectable vertical drilling spindles in Y-direction with 2 double horizontal drilling spindles in X-direction and 1 double horizontal drilling spindle in Y-direction Saw unit integrated in drilling head 27 tool change positions: Carousel tool changer with 22 positions and 102 mm center distance linear 5-position tool magazine for large tool diameters Original SCHMALZ tubeless worktable. Console table with 6 beams/traverses Workpiece lifting device Automatic measurement device for tool length. 12 pcs. original Schmalz vacuum cups 114 x 140 mm, height = 125 mm 1 pc. Becker vacuum pump, 100 m³/h 1 pc. chip conveyor belt Construction software Masterwork: 2D-Wop for standard panel processing/interior fittings, arch segments, doors Master 3D Level 2: for more complex operations, optionally expandable for full 5-axis interpolation Prepared for the use of solid wood clamps (arches), clamps offered as an option if required later Technical specifications according to the attached, detailed description ----- Total price in this configuration ex stock Oberkochen: on request! ----- Freight and commissioning on request! Options for frame production/arched elements with surcharges: ----- Reference ring for mounting chip guide elements on 5-axis electrospindles with HSK 63F interface: €410.00 Basic kit for clamping arched elements - Kdodpexmk Atsfx Af Tjg 6 pneumatic clamps with two movements for arched components: €7,090.00 (technical data according to manufacturer - no guarantee!) Chip guide elements, price per piece: €460.00 All prices quoted are net, plus VAT. (technical data according to manufacturer - no guarantee!)

Stanje: novo, Working width 3500 mm Working height 2300 mm Number of pressing cylinders: 4 pcs. S&S electrohydraulic frame press machine, Type Super Options: Working widths from 3,000 mm to 5,000 mm Working heights from 2,000 mm to 3,000 mm Optional equipment with center pressure beam, slanted window device, counter profiles for single-part production, and much more! Request the complete price list from us! Description: With automatic adjustment for corner joints (tenon and mortise joint, other types of corner joints optional), CE compliant version The only self-adjusting high-performance fully automatic frame press where wooden workpieces do not need to be pre-placed. Width and height adjustment takes place automatically, without any loss of time, immediately after the workpieces are directly placed into the pressing area. No repositioning of the timber is necessary. Base machine with heavy-duty welded frame construction, made of oversized, thick-walled special profiles. Guiding rails of the press corners on the pressure beams in wear-resistant, machined design. Continuous stop side support for width pressing, torsion-resistant, mounted on the base frame. Continuous lower support in extremely heavy-duty, torsion-resistant design, connected with base frame and machine feed. Inserting height 500 mm. All stops are finely adjustable for absolute angular precision and long-term accuracy. Sliding carriage on right side with fast motorized width adjustment with guaranteed parallel movement, including automatic hydraulic locking: Central drive for size adjustment horizontally and vertically, with high infeed and adjustment speed and automatic width and height adjustment (opto-electronic). 2 vertical double-acting pressure cylinders, piston diameter 50 mm, 250 mm cylinder stroke, adjustable pressing force from 400 to 2000 kg. 2 horizontal double-acting pressure cylinders, piston diameter 40 mm, 80 mm cylinder stroke, adjustable pressing force from 250 to 1250 kg. Press corners at upper right, in heavy, milled design, with automatic corner adjustment. Removable press corners Contact surfaces with adhesive-repellent finish. Support and pressure plate depth 100 mm. Kodpfed Rzc Rex Af Todg 8-fold hold and positioning device for absolutely loose placement of all frame parts in the pressing area (no pre-assembly required). Each frame part is held and positioned in two places. Automatic lifting function enables ergonomic placement of the upper cross piece for tall frames at an operator-friendly height. Enhanced work safety due to floor-level operation without ladders or steps. All individual frame components are placed directly in the pressing area. Program selection options: - Manual motorized via push button - Fully automatic via opto-electronic size setting including automatic pressing cycle combined with safety light barrier Automatic, cycle-controlled pressing process via impulse: Vertical pressing – release – horizontal pressing – release – vertical/horizontal pressing Control cabinet is service-friendly, mounted on the left of the base frame. Fast opto-electronic size setting. Compact hydraulic unit adjustable from 20 to 100 bar. Electric hand control, freely programmable for efficient work, especially with large and complex frame structures.

Stanje: novo, Panel Saw ALTENDORF WA 6 - Exhibition Machine - manual height adjustment, double roller carriage, scoring unit, tiltable, outrigger table, angle-mitre fence, automatic brake, can be lowered below table height ----- Technical Specifications ----- tilt range: 0 - 45°, cutting length: 2,500 mm, cutting width at rip fence: 1,000 mm, max. cutting height: 100 mm, max. saw blade diameter: 315 mm, mitre fence tilt range: up to 49°, speeds: 4,200 rpm, main motor power: 5.5 HP / 4.0 kW, scoring motor power: 0.5 HP / 0.37 kW, table height: 910 mm, Kedeu R Sx Espfx Af Tedg dust extraction port Ø: 1 x 100 / 50 mm each, weight: 450 kg - new exhibition machine -

Stanje: novo, Leto izdelave: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It also comes equipped with the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure optimally prepared workpieces for edging. Standard equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, end trimming saw, and combination milling unit. The F 2 can also optionally be equipped with a flat scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready to operate in 3.5 minutes Features: F2 - 10 m/min feed speed Kdjdpfslht Hzjx Af Tsg F2 next edge banding machine With PLC control (including touchscreen) and automatic glue application to the workpiece for edge material up to 3 mm; jointing cutter (incl. DIA tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change ready system including glue draining unit, high-frequency end trimming saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and replaceable insert cutter (combination type), robust chain feed, ball-bearing mounted double pressure rollers, viewing window at the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 chassis F2/30 pneumatic 3-point adjustment (radius, chamfer, flush trimming)

Stanje: novo, Bernardo Horizontal Bandsaw HBS 275 - 400 V Technical Specifications Cutting capacity round 90°: 225 mm Cutting capacity square 90°: 200 x 200 mm Cutting capacity flat 90°: 245 x 150 mm Cutting capacity round 45°: 160 mm Cutting capacity square 45°: 160 x 160 mm Cutting capacity round 60°: 100 mm Cutting capacity square 60°: 100 x 100 mm Working height: 910 mm Saw blade dimensions: 2480 x 27 x 0.9 mm Cutting speeds 400 V: 45 / 90 m/min Coolant pump S1 100%: 100 W Motor output S1 100%: 1.1 kW Motor input S6 40%: 1.5 kW Kjdped Du T Iefx Af Tedg Voltage: 400 V Machine dimensions (L x W x H): 1430 x 720 x 1700 mm Weight approx.: 190 kg Scope of delivery • Saw blade • Workpiece stop • Base frame • Band tension pressure gauge • Quick-action vice • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off