Romer-Profesjonalne Centrum Proszkowe Cp-02 nakup rabljenega (8.708)

Leto izdelave: 2020, stanje: novo, Pnevmatski priključek 1 " • Nadzira 7-palčno barvno ploščo na dotik • Prostornina posode za barvo 6-7 kg • Poraba zraka med barvanjem 15Nm3 / h • Poraba zraka za čiščenje 350Nm3 / h • Senzor nivoja barve lijaka Da • Ultrazvočni zaslon Da • brizgalke v prahu do 12 kosov Opis • RP-01 črpalka za dolivanje barve s svežo barvo iz kartona • Dva načina delovanja, obnavljanje barve z mešanjem ali skupni odpadki • Zaprti lijak za fluidizacijsko barvo • Samodejni program za čiščenje rezervoarja in injektorjev s stisnjenim zrakom • Sestav senzorja nivoja praška v lijaku • Samodejno polnjenje pladnja z barvo iz kartona Crjdpjfz U Nuefx Adijf • Senzor nivoja barve v škatli za ponovno polnjenje • Zvočni alarm opozori operaterja, če je v škatli malo barve • Center je povezan s krmiljenjem kabine prek protokola ModBus • Programabilni sesalni ventil za prah, ki ohranja središče prahu čisto

Leto izdelave: 2020, stanje: novo, Pnevmatski priključek 1 " • Nadzira 7-palčno barvno ploščo na dotik • Prostornina posode za barvo 6-7 kg • Poraba zraka med barvanjem 15Nm3 / h • Poraba zraka za čiščenje 350Nm3 / h • Senzor nivoja barve lijaka Da • Ultrazvočni zaslon Da Csdpfx Adefz U Rcoierf • brizgalke v prahu do 12 kosov Opis • RP-01 črpalka za dolivanje barve s svežo barvo iz kartona • Dva načina delovanja, obnavljanje barve z mešanjem ali skupni odpadki • Zaprti lijak za fluidizacijsko barvo • Samodejni program za čiščenje rezervoarja in injektorjev s stisnjenim zrakom • Sestav senzorja nivoja praška v lijaku • Samodejno polnjenje pladnja z barvo iz kartona • Senzor nivoja barve v škatli za ponovno polnjenje • Zvočni alarm opozori operaterja, če je v škatli malo barve • Center je povezan s krmiljenjem kabine prek protokola ModBus • Programabilni sesalni ventil za prah, ki ohranja središče prahu čisto

Leto izdelave: 2020, stanje: novo, Pnevmatski priključek 1 " • Nadzira 7-palčno barvno ploščo na dotik • Prostornina posode za barvo 6-7 kg • Poraba zraka med barvanjem 15Nm3 / h • Poraba zraka za čiščenje 350Nm3 / h • Senzor nivoja barve lijaka Da Csdpsfz Dknefx Adijrf • Ultrazvočni zaslon Da • brizgalke v prahu do 12 kosov Opis • RP-01 črpalka za dolivanje barve s svežo barvo iz kartona • Dva načina delovanja, obnavljanje barve z mešanjem ali skupni odpadki • Zaprti lijak za fluidizacijsko barvo • Samodejni program za čiščenje rezervoarja in injektorjev s stisnjenim zrakom • Sestav senzorja nivoja praška v lijaku • Samodejno polnjenje pladnja z barvo iz kartona • Senzor nivoja barve v škatli za ponovno polnjenje • Zvočni alarm opozori operaterja, če je v škatli malo barve • Center je povezan s krmiljenjem kabine prek protokola ModBus • Programabilni sesalni ventil za prah, ki ohranja središče prahu čisto

Leto izdelave: 2020, stanje: novo, Pnevmatski priključek 1 " • Nadzira 7-palčno barvno ploščo na dotik • Prostornina posode za barvo 6-7 kg • Poraba zraka med barvanjem 15Nm3 / h • Poraba zraka za čiščenje 350Nm3 / h • Senzor nivoja barve lijaka Da • Ultrazvočni zaslon Da Csdjfz U Rrepfx Adisrf • brizgalke v prahu do 12 kosov Opis • RP-01 črpalka za dolivanje barve s svežo barvo iz kartona • Dva načina delovanja, obnavljanje barve z mešanjem ali skupni odpadki • Zaprti lijak za fluidizacijsko barvo • Samodejni program za čiščenje rezervoarja in injektorjev s stisnjenim zrakom • Sestav senzorja nivoja praška v lijaku • Samodejno polnjenje pladnja z barvo iz kartona • Senzor nivoja barve v škatli za ponovno polnjenje • Zvočni alarm opozori operaterja, če je v škatli malo barve • Center je povezan s krmiljenjem kabine prek protokola ModBus • Programabilni sesalni ventil za prah, ki ohranja središče prahu čisto

Leto izdelave: 2020, stanje: novo, Pnevmatski priključek 1 " • Nadzira 7-palčno barvno ploščo na dotik • Prostornina posode za barvo 6-7 kg • Poraba zraka med barvanjem 15Nm3 / h • Poraba zraka za čiščenje 350Nm3 / h • Senzor nivoja barve lijaka Da • Ultrazvočni zaslon Da Credpfx Ajfz U Saodiof • brizgalke v prahu do 12 kosov Opis • RP-01 črpalka za dolivanje barve s svežo barvo iz kartona • Dva načina delovanja, obnavljanje barve z mešanjem ali skupni odpadki • Zaprti lijak za fluidizacijsko barvo • Samodejni program za čiščenje rezervoarja in injektorjev s stisnjenim zrakom • Sestav senzorja nivoja praška v lijaku • Samodejno polnjenje pladnja z barvo iz kartona • Senzor nivoja barve v škatli za ponovno polnjenje • Zvočni alarm opozori operaterja, če je v škatli malo barve • Center je povezan s krmiljenjem kabine prek protokola ModBus • Programabilni sesalni ventil za prah, ki ohranja središče prahu čisto

Leto izdelave: 2020, stanje: novo, Pnevmatski priključek 1 " • Nadzira 7-palčno barvno ploščo na dotik • Prostornina posode za barvo 6-7 kg Cjdofz U Swspfx Adierf • Poraba zraka med barvanjem 15Nm3 / h • Poraba zraka za čiščenje 350Nm3 / h • Senzor nivoja barve lijaka Da • Ultrazvočni zaslon Da • brizgalke v prahu do 12 kosov Opis • RP-01 črpalka za dolivanje barve s svežo barvo iz kartona • Dva načina delovanja, obnavljanje barve z mešanjem ali skupni odpadki • Zaprti lijak za fluidizacijsko barvo • Samodejni program za čiščenje rezervoarja in injektorjev s stisnjenim zrakom • Sestav senzorja nivoja praška v lijaku • Samodejno polnjenje pladnja z barvo iz kartona • Senzor nivoja barve v škatli za ponovno polnjenje • Zvočni alarm opozori operaterja, če je v škatli malo barve • Center je povezan s krmiljenjem kabine prek protokola ModBus • Programabilni sesalni ventil za prah, ki ohranja središče prahu čisto

Leto izdelave: 2020, stanje: novo, Pnevmatski priključek 1 " Cjdpfefz Dkgex Adisrf • Nadzira 7-palčno barvno ploščo na dotik • Prostornina posode za barvo 6-7 kg • Poraba zraka med barvanjem 15Nm3 / h • Poraba zraka za čiščenje 350Nm3 / h • Senzor nivoja barve lijaka Da • Ultrazvočni zaslon Da • brizgalke v prahu do 12 kosov Opis • RP-01 črpalka za dolivanje barve s svežo barvo iz kartona • Dva načina delovanja, obnavljanje barve z mešanjem ali skupni odpadki • Zaprti lijak za fluidizacijsko barvo • Samodejni program za čiščenje rezervoarja in injektorjev s stisnjenim zrakom • Sestav senzorja nivoja praška v lijaku • Samodejno polnjenje pladnja z barvo iz kartona • Senzor nivoja barve v škatli za ponovno polnjenje • Zvočni alarm opozori operaterja, če je v škatli malo barve • Center je povezan s krmiljenjem kabine prek protokola ModBus • Programabilni sesalni ventil za prah, ki ohranja središče prahu čisto

Leto izdelave: 2020, stanje: novo, Transport systems Depending on customer requirements, transport systems can be moved on the floor or suspended from rails. - For ergonomic solutions in manual installations, we recommend suspended cross conveyors (cross transport). - In automated systems, chain conveyors are most commonly used. These run continuously and are an excellent solution for companies focusing on process quality and repeatability. - For companies producing various products simultaneously—for example, with multiple spray booths in different colors—flexible solutions with non-powered conveyors are used. This is the most expensive solution. Crjdsfz Dubopfx Adisf All installations are custom-made to meet individual customer specifications. Continuous transport systems for overhead chain conveyors are designed and manufactured based on individual customer orders. In this system, floor conveyors can also be produced to carry items such as flower pots or rims (see photo). ROMER also manufactures suspended transport systems. Cross beams (cross transporters) are specifically designed and manufactured to suit the requirements of individual installations. Use of a photoelectric sensor The use of a photoelectric sensor in the detail area enables length measurement and, consequently, allows gun activation when the part enters its range, and immediate deactivation after painting. The photoelectric sensor is standard equipment. Identification of details by means of special markings. Above the hanger, plates with identification holes are present. Based on this, the PLC controller, in conjunction with the photoelectric sensor, identifies the painted part and activates or deactivates the guns at the precise moment—thereby saving energy and powder coating material. Vertical shape recognition. By using light barriers with horizontal detectors, the PLC control can analyze the vertical shape of a part. The PLC controller measures the time a part is expected to be inside the gun zone, allowing the guns to be turned on or off selectively. With light barriers equipped with multiple sensors horizontally and vertically. This solution enables precise measurement of workpiece dimensions and thus also allows control of manipulators.

Leto izdelave: 2020, stanje: novo, Transport systems Crodpfx Adjfz Dt Neiof Depending on customer requirements, transport systems can either be operated on the floor or suspended from rails. - For convenient solutions in manual systems, we recommend overhead cross-transfer systems (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These operate continuously and present an excellent solution for companies focused on process quality and repeatability. - For companies producing various items simultaneously or operating multiple booths with different colours, flexible solutions utilising non-powered conveyors are employed. This is the most expensive solution. All systems are custom-built according to customer specifications. Continuous hanging chain conveyor systems are designed and manufactured to individual client orders. In this system, it is also possible to implement floor conveyor systems to transport items such as flowerpots or wheels (see photo). ROMER also manufactures suspended transport systems. Cross-traverses (cross transporters) are specifically designed and manufactured for unique installation requirements. Use of a photocell Integrating a photocell in the detail area allows for length measurement and permits the guns to be activated as the part enters their range, and switched off immediately after coating to save energy and powder. The photocell is included as standard. Details can be identified using special markers. Above the hanger, plates with identification holes are installed. Based on this, the PLC controller, together with the photocell, recognises the coated part and switches the guns on and off at precisely the right time—saving energy and powder. Vertical shape detection. By using light barriers with horizontal detectors, the PLC can analyse the vertical profile of a part. The PLC also controls the dwell time of the part in the gun chamber, allowing for selective activation and deactivation of the guns. Light barriers with multiple sensors, both horizontally and vertically, are also available. This facilitates precise measurement of workpiece dimensions, enabling manipulator operation as well.

Leto izdelave: 2020, stanje: novo, Transport systems Depending on the customer's requirements, transport systems can either be moved on the floor or suspended from rails. - For user-friendly solutions in manual installations, we recommend suspended cross transfers (transverse transport). - In automated systems, chain conveyors are most commonly used. They operate continuously without stopping and offer an excellent solution for companies focusing on process quality and repeatability. - For companies manufacturing a variety of items simultaneously, such as with multiple booths in different colors, flexible solutions using non-powered conveyors are utilized. This is the most expensive solution. All installations are custom-built according to customer specifications. Continuous transport systems for suspended chains are designed and manufactured based on individual customer orders. In this system, it is also possible to implement floor conveyor systems for arranging items such as flower pots or rims (see photo). ROMER also manufactures suspended transport systems. Cross beams (cross-transfer units) are designed and manufactured to meet the specific requirements of individual installations. Use of a Photoelectric Sensor The use of a photoelectric sensor in the item area allows for length measurement and thus enables the spray guns to be activated when the item enters their range, and switched off immediately after coating. The photoelectric sensor is a standard feature. Identification of items by means of special markers. Above each sling, there are plates with identification holes. Based on this, the PLC controller, in combination with the photoelectric sensor, detects the coated item and activates or deactivates the guns at the correct moment—saving both energy and powder coating material. Vertical shape recognition. By using light barriers with horizontal detectors, the PLC control can analyze the vertical shape of an item. Crjdpfxofz I Edj Adiof The PLC controller tracks the time the item should appear within the gun zone—enabling selective activation or deactivation of the spray guns. With light barriers featuring multiple horizontal and vertical sensors. This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Leto izdelave: 2020, stanje: novo, Transport systems Depending on customer requirements, transport systems can be moved along the floor or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used, as they operate continuously and provide an outstanding solution for companies focused on process quality and repeatability. - For businesses that manufacture different items simultaneously—such as operating multiple booths with different colors—flexible solutions using non-powered conveyors are employed. This is the most costly option. Codpefz Nb Tjfx Adierf All installations are custom-built to suit customer requirements. Continuous transport systems for overhead chains are designed and manufactured according to individual client specifications. In this system, it is also possible to manufacture floor conveyor systems that carry items such as flower pots or rims (see photo). ROMER also produces overhead transport systems. Crossbeams (cross conveyors) are designed and manufactured to meet the requirements of specific installations. Use of a photoelectric sensor The use of a photoelectric sensor in the workpiece zone allows for length measurement and enables automatic switching of spray guns when the item enters their range, turning them off immediately after coating the item. The photoelectric sensor is included as standard equipment. Item identification is possible via special markings. Over the sling, there are plates with identification holes. Based on these, the PLC controller, in conjunction with the photoelectric sensor, detects the painted item and switches the spray guns on and off at the correct time, thus saving both energy and powder paint. Vertical workpiece shape detection. By using light barriers with horizontal detectors, the PLC control system can analyze the vertical shape of a workpiece. The PLC calculates the time when the item is expected to appear in the spray booth, enabling selective activation or deactivation of the guns. With multi-sensor light barriers both horizontally and vertically arranged. This solution allows for precise measurement of workpiece dimensions, which also enables the control of manipulators.

Leto izdelave: 2020, stanje: novo, Transport systems Depending on customer requirements, transport systems can be floor-mounted or suspended from rails. Csdpfx Asfz U S Ejdisrf - For convenient solutions in manual installations, we recommend suspended cross rails (lateral conveyor systems). - In automated systems, chain conveyors are most commonly used. These conveyors operate continuously and offer an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing different items simultaneously—such as operating multiple booths with different paint colors—flexible solutions using non-powered conveyors are applied. This is the most expensive option. All installations are custom-built to customer specifications. Continuous conveyor systems for hanging chains are designed and manufactured according to individual customer orders. This system also enables the integration of floor conveyor systems for arranging items such as flower pots or rims (see photo). ROMER also manufactures suspended transport systems. Crossbeams (lateral transporters) are engineered and produced for the specific demands of each installation. Use of a photoelectric sensor The use of a photoelectric sensor in the component area allows length measurement and enables automatic activation of spray guns when a part enters their range, followed by immediate deactivation after painting. The photoelectric sensor is part of the standard equipment. Parts can also be identified by special markings. Above the conveyor loop, there are plates with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric sensor, detects the painted part and switches the guns on and off at the correct time, thus saving energy and powder paint. Vertical shape recognition. By utilizing light barriers with horizontal detectors, the PLC can analyze the vertical geometry of a component. The PLC measures the time during which the part should appear in the spray area, allowing selective activation and deactivation of the spray guns. Multi-sensor light barriers, both horizontally and vertically, enable precise measurement of component dimensions and the control of handling robots.

Stanje: rabljeno, 1-Zangen-Klebebinder – 1-Clamp Perfect Binder CP Bourg BB-3002 EVA Baujahr 2008 – Serien-Nr. 61300520 Zählerstand: 118615 Buchrückenbeleimung: Hotmelt Seitenbeleimung: Hotmelt Fräswerk mit Absaugung Frästiefe einstellbar Technische Daten: Papierformat: min. 100 x 201 mm – max. 385 x 750 mm Umschlagformat: min. 100 x 201 mm – max. 385 x 750 mm Buchstärke: min. 1 mm – max. 60 mm Umschlagstärke: 80 – 300 g/qm Crsdpfeipaqysx Adiof Umschlagstapelhöhe: max. 80 mm Leistung: max. 650 Takte/h Abmessungen: 2.020 x 2.400 x 1.500 mm Online-Video-Inspektion per Skype-Video möglich. Wir würden uns sehr über Ihren Besuch freuen – weitere Maschinen auf Lager. Sofort verfügbar – Besichtigung möglich Lagerort: Emskirchen / Nürnberg – Probelauf möglich

Leto izdelave: 2022, stanje: novo, Service – Preparation of a quotation for a powder coating system from Romer. directly from the manufacturer romer-germany Manufacturer of powder coating systems and industrial ovens, plant engineering Csdpofnk H Sjfx Adijrf Delivery time approx. 10 to 16 weeks Shipping costs must be calculated separately.

Leto izdelave: 2024, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Model: MAS-30-2 Working Dimensions (WxDxH): 1200 x 1800 x 300 mm Drive: Electric Nominal Power: 21 kW Nominal Voltage: 380 V Frequency: 50-60 Hz Number of Nozzles: 250 pcs Pump Capacity: 1200 L/min Mixing of Cleaning Agents: Not possible – separate nozzles Nozzle Type: Chemically neutral Operating Temperature: 20 - 60° C Number of Cleaning Stages: 2 Tank Capacity: ~1200 L Filtration: Yes Manufacturer’s Warranty: 12 months Cedpfx Adjcubgpeisrf

Leto izdelave: 2026, stanje: novo, 🏭 PRAŠNA KOMORA ZA BARVANJE KPH Samodejno čiščenje filtrov z nastavljivim pulznim časom, plus ročni način. 🧼⏱️🖲️ 100 % poliestrski filtri – pralni, vodoodporni, dolga življenjska doba. 🧵💧♻️ ROMER JET™ čiščenje filtra – patentiran visokohitrostni zračni pulz za učinkovito čiščenje. 💥💨🏅 Nizkohrupni aluminijasti ventilatorji (74-79 dB) – varno delovanje, zmanjšano iskrenje in nizka poraba energije. 🔇⚡🛡️ Nastavljiva zračna loputa – antistatična plošča ščiti filtre in izboljšuje odsesavanje. 🌬️🛡️📈 Crsdefz Atbepfx Adiof Tesna montaža filtrov – tesnilo + objemka za močno zapiranje in enostavno vzdrževanje. 🔩🧷✅ Zaslon na dotik – samodejno (časovno), samodejno (tipalo zamašitve), ročno + opozorila za menjavo filtra. 📲🔁⚠️ Opcijska posoda za prah – zbiranje odpadkov ali fluidiziran rezervoar z direktnim dovodom za aplikator. 🧺💨🎯 Nadglavna vlečna naprava – premika nosilce skozi komoro in zmanjšuje ročno delo. 🏗️➡️💪 Integrirana enota za sejanje (z rezervoarjem) – čisti povratni prah za ponovno uporabo, EX-cona vibrator. 🧪♻️⚙️ Eksplozijsko varna zasnova – izbrani sestavni deli preprečujejo nastanek eksplozivnih zmesi. 🛡️💥✅

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: KAP1, potreba po zraku: 16.000 m³/h, moč: 36 kW (48,95 KM), sesalna zmogljivost: 16.000 m³/h, Oprema: kabina, Dielektrische automatische Pulverbeschichtungsanlage KAP1 Preis: 492.693,30 PLN + MwSt. Elektrische und Energiedaten • Spannung: 400 V (3P + N + PE) • Netzanschluss: 36,34 kW • Pneumatikanschluss: 1" • Luftdruck: min. 6 bar • Luftqualität: Öl < 0,1 mg/m³, Wasserdampf < 1,3 g/m³ • Luftverbrauch: 1710 Nl/min (Betrieb) • Kompressor: SC-30 • Druckluftbehälter: 1800 L Beschichtungsparameter • Beschichtungsgeschwindigkeit: 1933 mm/min Codpfxsv Rpx Sj Adijrf • Werkstückmaße: 800 x 1800 mm • Hängehöhe: 500 mm • Schichtdicke: 100 µm • Pistolenanordnung: vertikal Technische Daten und Konfiguration • Ausführung: Dielektrischer Kunststoff • Durchgangsmaße: 1000 x 2400 mm • Luftdurchsatz: 12.348–16.000 m³/h • Pulverzentrum: ProfiCenter CP02 • Manipulatoren: 2 Stk. • Pistolen: 8 automatisch, 2 manuell (ProfiSpray) • Werkstückerkennung: Ja (Höhe, Breite) • Systeme: Zyklonabscheider, ProfiControl, Trägerschubsystem • ATEX: Zone 22, II 3D Bühnen und Kabinenkörper • Bühnen: Ein- und Auslauf, Edelstahlboden, rutschfeste Treppen • Gehäuse: Dielektrischer Kunststoff, LED-Beleuchtung, Halterungen für Manipulatoren Luftmesser und Absaugkanal • Automatische Bodenreinigung • Absaugkanal mit pneumatischer Klappe Pistolenabreinigung und Steuerung • Automatische Pistolenabreinigung • 10" Touchpanel, 50 Programme, Manipulatorsteuerung, Staubabsaugung, Antriebsgeschwindigkeit X-Achse und Werkstückfördersystem • Automatische Pistolenpositionierung • Werkstückförderung: Geschwindigkeit 570–2830 mm/min, 2 Zieheinheiten Die Maschine umfasst außerdem: • ProfiSpray A Applikator • PSS-1 Steuergerät • PM-1 Pistolen • ProfiCenter CP-02 Pulverzentrum • CK-D1400L Zyklonstaubabscheider • MA1-180 Manipulator und MX1-10 X-Achse • OZ-12H Staubabscheider • ProfiControl 10" Steuerung • BP-H2000 W900 Werkstückmesssystem

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Posebej zasnovano za majhna podjetja in prašne lakirnice platišč. Kompletna naprava, sestavljena iz: Peč za prašno barvanje širina x višina x globina: 1200 x 1600 x 1200 mm, 15 kW Kabina za prašno barvanje širina x višina x globina: 2000 x 2240 x 920 mm Najnovejša praškovna pištola iz serije ROMER ProfiSpray Codpfx Aog Ngt Nodisrf Vse skupaj za 16.990,00 neto, brez prevoza in montaže.

Stanje: pripravljen za uporabo (rabljen), Siemens 6ES7614-1AH01-0AB3-Z Simatic CPU614 E version 02, used, normal signs of wear, 100% fully functional Cjdpfx Aji Edu Dsdiorf

Stanje: pripravljen za uporabo (rabljen), Bosch CNC CP / MEM 5 / G107 / 913572 CPU modul, SN:001028510, rabljen, normalni znaki uporabe, 100% delujoč, dobava po fotografijah. Crsdpfx Aex Eqxbedijf

Stanje: pripravljen za uporabo (rabljen), Indramat CPUB 02-01-FW 261366 Serial Interface, key switch defective – see photo, serial number as per photo, used, normal signs of wear, fully functional, scope of delivery as shown in the photos Codpoi Ebb Refx Adiorf

Leto izdelave: 2013, stanje: pripravljen za uporabo (rabljen), Prenosni 7-osni koordinatni merilni sistem ROMER Infinite 1.0 SC 5028SC. Merilno območje premer: 2800mm, točkovna ponovljivost: ca. +/-0,045mm - 0,050mm, volumetrična negotovost merjenja dolžine: ca. +/-0,064mm - 0,075mm, brezžična komunikacija: Wi-Fi 802.11b/g, baterijsko napajanje, programska osnova: WinRDS gonilnik za združljivost z merilnimi programskimi rešitvami PolyWorks, PC-DMIS, PowerInspect, Metrolog. Vključuje integriran balancer, transportni kovček, set tipal 6mm, 15mm, konica, pritrdilna plošča s 3 magneti, preizkusna palica s kalibracijskim certifikatom. Ogled možen po dogovoru. Crodpfxoyk Hcrs Adisf

Stanje: rabljeno, Booklet Maker / Brochure System CP Bourg BSF - BCM-e - BM-e Maximum Speed: up to 5,000 booklets/hour Crsdpfx Aoq Sbp Uodiof Paper Weight: 60 - 350 g/m² Paper Size: min. 119 x 118 mm – max. 370 x 600 mm Booklet Thickness (staple-fold-trim): 2–30 sheets at 75 gsm Top/Side Stitching: Paper Size: min. 119 x 170 mm – max. 370 x 300 mm Booklet Thickness: 2–55 sheets at 80 g/m² Folding / Face Trimming: Paper Size: min. 119 x 170 mm – max. 370 x 300 mm Booklet Thickness: 2–55 sheets at 80 g/m² Face Trimming: 0 to 25 mm (0 to 0.98 in) Bourg BSF Sheet Feeder for Off-Line and In-Line Processing Online Video Inspection via Skype available. We would be pleased to welcome you for a visit – more machines in stock. Immediately available – Inspections possible. Located in Emskirchen / Nuremberg – Testing is possible.

Stanje: novo, Leto izdelave: 2025, A typical coating system consists of surface pretreatment (cleaning and/or application of a conversion layer), intermediate drying, electrostatic coating zone (booth/manual powder application unit), and dryer (curing oven). The workpieces are transported through the system by a conveyor system. Our company ROMER® designs, manufactures, and installs complete powder coating lines. Codocv Nl Repfx Adierf Our systems can be inspected and tested in Hürth near Cologne. Request a quote for a system tailored to your specific application.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 12 h, moč: 30 kW (40,79 KM), vhodna napetost: 380 V, temperatura: 200 °C, notranja dolžina: 1.200 mm, notranja širina: 1.700 mm, notranja višina: 2.300 mm, skupna dolžina: 1.500 mm, skupna širina: 2.200 mm, skupna višina: 2.800 mm, skupna masa: 400 kg, Število komor: 1, vrsta upravljanja: Krmiljeno s PLC krmilnikom, Oprema: CE označba, Profesionalna peč za utrjevanje kompozitov – Romer SL Notranje dimenzije: 1200 × 1700 × 2300 mm Visoko zmogljiva industrijska peč za utrjevanje kompozitov priznanega poljskega proizvajalca Romer, zasnovana za napredne procese izdelave kompozitov, vključno z utrjevanjem prepregov iz ogljikovih vlaken, sušenjem, naknadnim utrjevanjem ter toplotno obdelavo. Ta električna komorna peč je idealna za uporabo v letalski, avtomobilski, navtični, motošportni in industrijski proizvodnji kompozitov, kjer je potrebna natančna in stabilna regulacija temperature. Izdelana je z robustnim jeklenim ogrodjem, notranjimi oblogami iz nerjavečega jekla ter trpežno prašno barvano zunanjo površino, kar zagotavlja zanesljivo delovanje v neprekinjeni industrijski uporabi in dolgo življenjsko dobo. Pametni krmilni sistem omogoča precizno upravljanje s temperaturo, učinkovito porabo energije in nadzorovano ogrevanje/hlajenje. Integriran sistem kroženja zraka in ventilacije zagotavlja enakomerno porazdelitev toplote po celotni komori za dosledno kakovost utrjevanja. Ključne značilnosti: • Najvišja delovna temperatura: 200°C • Notranje dimenzije: 1300 × 1800 × 2000 mm • Prilagojena za utrjevanje prepregov • Robustna industrijska konstrukcija • Notranja komora iz nerjavečega jekla • Visoko učinkovit sistem kroženja vročega zraka • Natančen programabilen nadzor temperature • Večstopenjski programi utrjevanja • Nadzorovani cikli ogrevanja in hlajenja • Enakomerna porazdelitev temperature • 8 notranjih vakuumskih priključkov v komori • Vakuumska črpalka vključena v ceno • Primerno za ogljikova vlakna, steklena vlakna, prepreg, orodja in kompozitne dele Uporaba: • Utrjevanje prepregov iz ogljikovih vlaken • Proizvodnja kompozitnih delov Crjdpoy Tvvzjfx Adijf • Komponente za letalsko in motošportno industrijo • Proizvodnja navtičnih kompozitov • Naknadno utrjevanje orodij in kalupov • Sušilni in toplotni postopki • Raziskave, razvoj ter prototipna proizvodnja Peč je v zelo dobrem delujočem stanju ter omogoča ogled in preizkus na lokaciji.