Rausch Räummaschine Stroj Za Izvlačenje nakup rabljenega (100.109)

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, dolžina bročanja: 1.000 mm, število bročirnih položajev: 1, hitrost vlečenja: 3 m/min, Manufacturer: Rausch (Haan/ Rhld) Model: RS 6/1000 Machine No.: 51261 Year of Manufacture: 1978 Weight: 680 kg Overhaul: 11/2024 by Wiemers AG General / Technical Data: Overhauled mechanical vertical broaching machine Rausch RS 6 G Pulling force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Max. stroke: 1000 mm Max. tool length: 1200 mm Table size / working area: 610 x 470 mm / 520 x 320 mm Table aperture: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,250 mm x 850 mm x 1,200 mm (H = table height from floor, without attachments) Motor: 4.4 kW / 5.5 kW Power Supply: 400 Volt / 50 Hz Additional modifications / optimizations compared to the original machine: - External stroke adjustment - New, cross-machine reproducible tool length adjustment system - Additional limit switches for end position monitoring - Machine safety door with monitoring (integrated into emergency stop circuit) - Machine enclosure below the safety door with chip guard and tool rest - Electrical sensing of the clamping jaws (tool removal control to prevent unintended retraction of the drawbridge) - Coolant swivel system with solenoid valve controlled over the swivel process (to activate coolant before broaching stroke – visual check of lubricant flow, no dry cutting!) - Electrical wiring routed in protective steel conduits - Heavy-duty control cabinet mounting for receiving machine components - Additional oil-tight drip tray on the control cabinet - 3-sided enclosed splash guard cabin (W = 960 x D = 450 x H = 590 mm) - Reinforced chip screen with magnetic separator - Control panel made of stainless steel sheet with permanent labeling - 4 central lubrication points for trapezoidal spindle drive Remark: The machine is fully overhauled, and the machine body has been completely refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made of cast, wear-resistant bronze - All bearings and seals are new - The coolant system (pump, solenoid valve, and drain tap) including the coolant/lubricant swiveling system is new - The clamping jaws are new - The entire electrical system (control cabinet) is new - All metal sheets and covers are new - The following components have been overhauled and re-used: - Machine base - Machine stand - Machine table with table insert - Drawbridge (clamping jaws are new) - Gear wheels - Electric motor (new brake, new bearings) The machine is available in our warehouse and can be inspected under power. The attached pictures are original photos of the machine. The machine is marked with the “CE” label. This “CE” conforms to the state of 1998 (first overhaul). Nodpfxew Ighis Ac Hsdb

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Nova strojna oprema Vertikalna razširjalna naprava VADARI GmbH, TIP SRM 2027-60 KN – možno tudi 90 KN ali 120 KN! RAZŠIRJALNE NAPRAVE, PROIZVEDENE V NEMČIJI. Trenutno so na voljo po ugodnih posebnih cenah! Opomba: Napravo je mogoče ponuditi in izdelati tudi v različici z vlečno silo 90 KN (9 ton) ali 120 KN (12 ton). ==> Informacije za proizvodna podjetja oziroma trgovce z lastno proizvodnjo: Po potrebi lahko kupite načrte, pravice, rezervne dele, podatke o strankah in potencialnih strankah ter načrtovalno in proizvodno dokumentacijo (tudi načrte za različico s 9 tono vlečne sile) za razširjalno napravo. Če ste zainteresirani, se obrnite na nas. ==> Nove stroje izdelujemo po naročilu. Omogočena je hitra izdelava in dostava. ==> Trenutno so na voljo rezervni deli, kot so vretena in matice vretena, za razširjalne naprave Wolff SRM in VADARI SRM. Ekonomična in izjemno robustna vertikalna razširjalna naprava za dolgotrajno uporabo. Razširjalna orodja (tudi posebne igle za notranje ozobljene dele itd.) in dodatna oprema so na voljo. Prosimo, povprašajte posebej. Na naši razširjalni napravi je mogoče uporabljati vsa razširjalna orodja in vpenjalne glave drugih proizvajalcev! Popolna proizvodnja in montaža v naši tovarni v Nemčiji. Ndsdpfxeuqbnhs Ac Hob Poleg tega ponujamo tudi rezervne dele za razširjalne naprave Wolff in VADARI SRM (vretena, matice vretena, motorji, zobniki ter vsi drugi potrebni deli – vključno z električno opremo). Vertikalna razširjalna naprava, tip SRM 2027 – NOVA NAPRAVA: Različica 60 KN: Območje uporabe je v bistvu pri proizvodnji utorov za pero od 3 do 28 mm (tudi več) in profilov podobnih dimenzij. Zaradi svoje kompaktne zasnove, ki zavzema malo prostora, se lahko ta naprava uspešno uporablja v majhnih, srednjih in velikih obratih. Nizka cena upravičuje nakup tudi pri majhnih serijah in posamičnih izdelavah. Pogon je izveden prek polprestavljivega motorja z zavoro. Vzdrževalni dvojni pogon vretena zagotavlja nemoten tek in osrednjo točko vlečenja ter konstantno hitrost rezanja. Prosta miza za orodja omogoča, da se tudi veliki obdelovanci lahko brez ovir položijo. Večina obdelovancev se pri razširjanju ne potrebuje dodatne pritrditve. Nastavitev hoda se izvaja s prilagodljivimi končnimi stikali z omejitvijo hoda. Pri krajših pestih/obdelovancih je mogoče več obdelovancev položiti enega na drugega. Razširjalne igle, vodila in rezervni deli so na voljo na zahtevo. Tehnični podatki: Vlečna sila: 60 KN pri 3 m/min, 40 KN pri 6 m/min. Hitrost razširjanja: 3 m/min + 6 m/min (opcijsko: brezstopenjska nastavitev hitrosti (od 0 m/min do 6 m/min z razširjeno elektroniko). Hitrost vračanja: 6 m/min. Hod: 1050 mm Dolžina razširjalnega orodja: 1200 mm Premer obdelovanca: neomejen Delovna miza: 450 x 350 mm Odprtina mize: 140 mm Teža: pribl. 510 kg Površina: 750 x 570 mm Skupna višina naprave: 1510 mm Moč pogona: 3,7 / 4,4 kW Električna oprema: 400 / 230 V, 50 Hz Nadzorna napetost: 230 V Delovna napetost: 400 V, 50 Hz Barva: zunanja stran RAL 7035/7036/7016, notranja stran RAL 3000 Varnostna vrata: standardna oprema Naprava za hlajenje: standardna oprema Naprava ustreza veljavni direktivi o strojih in ima oznako CE.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Na voljo je notranji navpični vretenasti stroj Frömag. Vretenaste igle: 3, hod: 800 mm, vlečna sila: 60 kN, priključna moč: 15 kW. Dimenzije stroja X/Y/Z: cca 1050 mm/900 mm/3800 mm, krmiljenje: Frömag Commander PP-10. Ogled na lokaciji je mogoč. Ndsdpfx Aexph Sdoc Hsb

Stanje: rabljeno, TECHNICAL DATA - Maximum force: 63 kN - Broaching stroke: 1000 mm - Spindle travel: 400 mm - 3 broaching speeds: 2.5 - 5 - 7.5 m/min - Return speed: 24 m/min - Number of working stations: 1 - Hydraulic motor: 9 kW - Hydraulic capacity: 600 l - Cooling capacity: 150 l - Main voltage: 400 V - Total connected load: 10.5 kW - Required space: 3,700 x 3,000 mm - Height: 3,200 mm Nedpfsug U H Usx Ac Hsdb - Weight: 3,500 kg

Leto izdelave: 1963, stanje: rabljeno, številka stroja/vozila: 18135, Broaching machine - horizontal Manufacturer: Forst Model: RIW 100/2200 Tensile force: 100 tonnes Ndjdpfxobrcy Ne Ac Hob Stroke: 2,200 mm Crane available separately under listing Y941

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, številka stroja/vozila: WAG 3102, Vertical Internal Broaching Machine Rausch / Wiemers SR 30 (WAG 3102) Manufacturer: Rausch / Wiemers Model: RS 3/1000 Machine No.: WAG 3102 Year of manufacture: 2024 Weight: 480 kg Overhauled: 11/2024 by Wiemers AG General / Technical Data: Completely overhauled mechanical vertical broaching machine Rausch SR 30, unused, with "CE" certification Pulling force: 30 kN (3,000 kg) Broaching speeds: 3 m/min & 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Nedpev Rpnmjfx Ac Hsdb Table dimensions / working area: 430 mm x 320 mm / 340 mm x 220 mm Table aperture: Ø 90 mm for standard broaching mandrels, "Rausch System" Workpiece diameter: any (removable coolant swivel system) Broaching capacity / keyway width: up to 20 mm in steel (for broaching tools of 16 mm width and above, only with stepped tool shank) Dimensions (H x W x D): 1370 mm x 680 mm x 750 mm (h = table height to floor without attachments) Motor: 2.5 kW / 3.0 kW, 2-stage, for 2 operating speeds Power supply: 400 Volt / 50 Hz Equipment includes: - Geared motor drive with 2 operating speeds - Modified drive system, Wiemers "SR" design - Reinforced pull bridge made of tool steel for higher pulling forces - Safety door with interlock, safety switch, and safety monitoring - Easily removable chip tray with tool rest - Externally adjustable tool length setting system (reproducible across machines) - Protective cover for stroke adjustment and electrical switching units - Oil-tight tray on the control cabinet - Electrical sensing of clamping jaws (tool removal monitoring to prevent unintentional retraction of the pull bridge, extra safety for operator & tool) - Integrated coolant system with electrically controlled solenoid valve and drain tap - Coolant swivel system, automatic coolant control via swivel system - Extra reinforced chip basket and chip sieve with magnetic insert - Stainless steel control panel with durable labeling - 4 central lubrication points for the trapezoidal thread spindle drive, including manual grease gun - Electrical provisions for external control (16-pin connector) - Provisions for automatic jaw opening for profile broaching via roller lever - Machine documentation with "CE" declaration of conformity Optional extras: - Automatic jaw openers for easier tool removal during profile broaching - Open 3-sided splash guard cabin (W x D x H) 700 x 350 x 600 mm - External electrical control unit for broaching and return stroke, plus emergency stop operation Note: The machine has been completely overhauled. During the overhaul, the machine base, machine body, and machine table have been fully refurbished. All other components have been replaced. The drive system has been modified. The machine has been brought up to the state of the art and complies with the latest "CE" regulations (as of 2024). General: The double-spindle drive ensures a smooth and centrally aligned pull point as well as consistent broaching speed. The machine is specifically designed for the production of keyways up to 20 mm (for broaching tools of 16 mm and above only with stepped tool shanks). Due to its design, the machine is quick and easy to set up for keyway broaching using flat broaching tools.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1968, številka stroja/vozila: 51039/373, Vertical Internal Broaching Machine Rausch RS 6G (WAG 855) Manufacturer: Rausch (Haan/ Rhld) Model: RS 6G / 1000 Machine No.: 51039/373 Year of Manufacture: 1968 Weight: 800 kg Overhaul: 12/2024 by Wiemers AG General / Technical Data: Completely overhauled, mechanical vertical broaching machine Rausch RS 6G, unused with "CE" marking Pulling force: 60 kN (6,000 kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Max. stroke: 1000 mm Max. tool length: 1200 mm Table size / Working area: 610 x 470 mm / 520 x 320 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: Unlimited Dimensions (h x w x d): 1600 mm x 850 mm x 1000 mm (h = table height to floor without attachments) Motor power: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Equipment: - Gearmotor drive with 2 working speeds - Reinforced pull bridge made of tool steel for higher pulling forces - Safety door with automatic locking and safety monitoring - New chip chute with tool storage - Protective cover for stroke adjustment - Oil-tight tray on the control cabinet - Electrical detection of clamping jaws (tool removal monitoring to prevent unintended return of the pull bridge; additional safety for operator & tool) Nsdev Rmvzjpfx Ac Hjdb - Integrated coolant system with electrically controlled solenoid valve and drain tap - Coolant swivel system with automatic coolant switching via swivel system - Chip screen with magnet - Externally adjustable tool length setting system (reproducible across machines) - Stainless steel control panel with permanent labeling - 4 central lubrication points for the trapezoidal screw drive with manual grease gun Note: The machine has been completely overhauled. During the overhaul, the machine base, body, and table were fully refurbished. All wear parts have been replaced. The machine has been upgraded to the current state of technology and complies with current "CE" regulations. The machine is supplied with "CE" certification. General The dual spindle drive ensures smooth and centrally aligned pulling with a consistent broaching speed (selectable at 3 m/min or 6 m/min). By design, the machine can be quickly and easily set up for broaching with flat broaching tools for keyway broaching. Thanks to the universally designed pull bridge and table, both profile and flat broaching tools can be used without the need for additional broach holders. Matching broaching tools and broaching mandrels are available on request.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2023, vhodna napetost: 400 V, dolžina bročanja: 1.000 mm, število bročirnih položajev: 1, hitrost vlečenja: 3 m/min, Manufacturer: Rausch (Haan/Rhld) Model: RS 4/1000 Machine No.: 5027 Year of Manufacture: 2001/2023 Weight: 580 kg Overhaul: 3/2023 by Wiemers AG General / Technical Data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4 with current “CE” marking Pulling force: 40 kN (4,000 kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table size / Working area: 540 x 340 mm / 450 x 250 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,350 mm x 900 mm x 1,000 mm (with splash guard cabin) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Accessories / Special Equipment: - Drive with 2 speeds - Safety door with safety interlock and chip chute - Chip chute with tool tray - Electric monitoring of clamping jaws (tool removal control to prevent unintentional return of the pull bridge) - Integrated coolant system with solenoid valve (controlled via swivel system) - Patented coolant/lubricant swivel system - Externally adjustable tool length setting system (replicable across machines) - 4 central lubrication points for the trapezoidal spindle drive - Closed centring plate for profile tools with additional protection plate for flat broaching tools (keyway tools) - 3-sided closed splash guard cabin with tool tray (ideal for profile broaching) - External control panel (connected via Harting plug connector) Remarks: The machine has been completely overhauled, with the machine body fully refurbished. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast, wear-resistant bronze - All bearings and seals have been renewed - The coolant system (pump, check valve, and drain tap), including the coolant/lubricant swivel system, is new - The coolant supply is controlled by a solenoid valve, which can be actuated via the swivel system - The pull bridge, clamping jaws, and rack segments are new - A switchable clamping jaw monitoring system has been implemented (additional safety for operator and prevention of tool breakage) - Safety door with safety interlock, signal indicator, and door lock Ndedpfx Acow H Dgne Heb - Tool length setting system has been relocated outside the machine enclosure - Additional end position limit switches installed - All electrical equipment (control cabinet) is new - No PLC installed, making the machine electrically maintenance-friendly - New drive motor (SEW Germany) with brake - Machine has been newly painted with 2-component structural lacquer General Information: The dual-spindle drive ensures a smooth and central pulling point as well as a constant broaching speed (optionally 3 m/min or 6 m/min). By design, the machine is quick and easy to set up for broaching with flat tools for keyway cutting. Thanks to the universally designed pull bridge and machine table, broaching with profile and flat broaching tools is possible without using additional pull heads.

Leto izdelave: 1971, stanje: rabljeno, General / Technical Data: Manufacturer: Forst Model: RSIA-20-1320 Year of manufacture: 1971 Weight: 6,000 kg Pulling force: 20 t Broaching speeds: 5 m/min Return speed: 16 m/min Maximum stroke: 1,320 mm Njdpfx Aslwu Spjc Hjdb Broaching stations: 3 Clamping surface: 370 x 620 x 105 mm Note: The machine is connected to power at our warehouse and can be inspected.

Leto izdelave: 1971, stanje: rabljeno, General / Technical Data: Manufacturer: Varinelli Model: BVE-S-25-2000 Year of manufacture: 1971 Weight: 12 t Drawbar pull: 25 t Maximum lift: 2000 mm Clamping surface: 500 x 500 mm Table opening: 550 mm Power supply: 380 Volt / 50 Hz Ndedpelwvm Aefx Ac Hjb Accessories / Special equipment: - Tilting table Note: The machine is connected to power in our warehouse and can be inspected.

Leto izdelave: 1990, stanje: zelo dobro (rabljeno), Manufacturer: Arthur Klink Year of manufacture: 1990 Model: RISZ 16 x 1250 x 400 / HG Technical Specifications: Nedpfjlpadyex Ac Hsdb Vertical internal broaching machine in very good technical condition Pulling force: 16,000 kg Broaching speed: up to 27.5 m/min, infinitely variable Return speed: up to 34 m/min, infinitely variable Maximum stroke: 1,250 mm Broaching stations: 4 units Equipment: - Automatic tool changer - Automatic parts feed (part-specific) - Hydraulic tool clamping device (part-specific) Note: High-performance production broaching machine for large-scale series production with high cutting speed!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Manufacturer: Arthur Klink Year of manufacture: approx. 1960 Type: Horizontal Broaching Machine Model: RH 10-50 Machine no.: 241 Weight: 3,700 kg General / Technical Data: Used horizontal hydraulic internal broaching machine in age-appropriate good condition, with heavy-duty manual tool feeder. Broaching stroke: 1,500 mm Tensile force: 10,000 kg (100 kN) Mounting in drawbridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Clamping surface (workpiece area): Ø 460 mm Max. workpiece diameter: approx. 750 mm (limited by the tool feeder tray) Cutting speed: hydraulically stepless adjustable from 1.0 m/min to 7 m/min Return speed: hydraulically stepless adjustable from 5 m/min to 30 m/min Required installation space (W x D x H): approx. 6500 mm x 950 mm x 1,400 mm (without working area) Power supply: 380 Volt, 50 Hz Connected load: 8 kW Features: • Mechanical-hydraulic control for broach & return stroke • Integrated coolant/lubricant system • Manually operated tool feeder • Broaching slide with puller head mount, guided on both sides with flat guides • Adjustable tensile force limiter Ndodpfx Ajr A Hdgjc Heb Accessories: • 1 universal puller head for flat shanks, 3 mm to max. 25 mm wide • Adapter sleeve for drawbridge from Ø 85 mm to Ø 63 mm Remarks: The machine is suitable for keyway production with flat broaching tools as well as for profile broaching. Due to the machine bed and the robust tool feeder, the machine is well-suited for heavy-duty profile broaching tools. The machine is used and in very good condition for its age. The machine is held in stock and can be inspected under power. The machine has not been refurbished, neither technically nor visually, but is ready for immediate use. Profile broaching heads are largely available used upon request, depending on DIN standard, dimensions, and stock availability. Direct contact details and further information can be found in the attached PDF document.

Stanje: rabljeno, Leto izdelave: 1986, skupna masa: 6.500 kg, moč: 42 kW (57,10 KM), vhodna napetost: 380 V, dolžina bročanja: 1.600 mm, število bročirnih položajev: 1, premer obdelovanca (maks.): 500 mm, Manufacturer: Varinelli Milano, Italy Model: BV 25 x 1600 x 500 Year of manufacture: 1986 Weight: 6,500 kg Machine No.: 3269 General / Technical Data: Vertical hydraulic internal broaching machine with one broaching station Pulling force: 25,000 kg Broaching stroke: 1,600 mm Ndjdpswqmaxefx Ac Hob Number of broaching stations: 1 unit Maximum clearance width between cylinders: 540 mm Cutting speed: hydraulically and infinitely variable from 1 m/min to max. 8 m/min Return speed: hydraulically and infinitely variable up to max. 18 m/min Space requirement: see machine layout diagram Power supply / connected load: 380 Volt, 50 Hz / 42 kW Accessories / Special equipment: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is fitted with a spring-actuated locking mechanism (DIN 1417) in the pull bridge. The tool feeder system is locked hydraulically-mechanically. The machine features a coolant system with an integrated chip conveyor for installation in a pit. Remarks: The machine retains its original paintwork. It is designed for use in series production of medium and large batch sizes; for optimal operation, installation on a foundation (pit) is recommended. Pull heads and ejector needles are available upon request. The machine can be inspected at our warehouse. General information: We continually stock a wide selection of approximately 80 used broaching machines with pulling forces ranging from 3,000 kg to 63,000 kg, in both horizontal and vertical configurations. Many of the broaching machines in stock are available for demonstration. If required, we can also supply various used equipment such as pull heads, ejector needles, broaching tools, and additional specific accessories. We are a contract broaching facility by trade and, with over 50 years of experience in broaching technology, can assist you with any technical queries.

Stanje: rabljeno, Leto izdelave: 1979, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 17065, Manufacturer: Henning Model: U6/1000 Machine No.: 17065 Year of manufacture: 1979 Weight: 1,100 kg General / Technical Data: Used mechanical vertical broaching machine Henning, in operational condition Pulling force: 6,000 kg (60 kN) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table size / working area: 600 x 460 mm / 480 x 340 mm Table opening: Ø 170 mm with eccentric table insert with Ø 90 mm bore for standard broaching mandrels (Rausch system) Workpiece diameter: unrestricted Dimensions (H x W x D): 1,650 mm x 1,200 mm x 700 mm (H = table height from floor without attachments) Motor: 7.4 / 10 kW Power supply: 380 Volt / 50 Hz Accessories / Special Equipment: - Integrated coolant system - Return control with double activation mode - Machine documentation - Automatic jaw opener in the lower pull bridge position (for tool removal) - Tool clamping with universal jaws for flat shanks DIN 1416 BL 6 Remarks: Ndodpfxeup Uzfj Ac Hob The machine is in its original condition and its functionality has been tested. The machine is driven mechanically via a trapezoidal-thread spindle and a geared motor. Unlike most mechanically driven broaching machines where the trapezoidal spindle serves as both drive and guide element, this machine features additional guide columns. Thus, the machine also has column guidance and is very robustly built. The double spindle drive is ideal for a consistently constant cutting speed, even with higher pulling forces. The machine is stored at our warehouse and can be inspected under power.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, skupna masa: 2.900 kg, moč: 8 kW (10,88 KM), vhodna napetost: 380 V, število bročirnih položajev: 1, skupna širina: 6.100 mm, skupna višina: 1.900 mm, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1959 / 1998 Weight: 2,900 kg Machine no.: 1194 General / Technical Data: Hydraulic internal broaching machine in operational condition Broaching stroke: 1,420 mm Pulling force: 10,000 kg Diameter of pull head mount in the crossbeam: 85 mm Broaching tool clamping: Universal pull head for flat shanks up to 25 mm width Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. approx. 360 mm (limited by the tool feeder machine body) Cutting speed: hydraulically infinitely variable from 1 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 4,100 (6,100) mm x 800 mm x 1,900 mm (without working area) Power supply / connected load: 380 Volt, 50 Hz / 8.0 kW Ndedpfxsxtcz Ij Ac Hjb Accessories / Special features: • The machine features manual-hydraulic control for the broaching stroke movement • The machine is equipped with an integrated coolant/lubricant system • A basic oil drip tray is mounted on the machine bed without tool feeder! Remarks: The machine is ideal for manufacturing keyways and profiles. Broaching needles, arbors and pull heads can be supplied upon request.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, skupna masa: 480 kg, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, dolžina bročanja: 1.000 mm, število bročirnih položajev: 1, hitrost vlečenja: 3 m/min, hitrost vzvratne vožnje: 100 mm/s, premer obdelovanca (maks.): 800 mm, skupna višina: 1.680 mm, Manufacturer: Wiemers AG Model: SR 30 /1000 Machine No.: WAG 3104 Year of manufacture: 2025 Weight: 480kg General / Technical data: New vertical broaching machine, make: Wiemers SR 30 (100% compatible with Rausch RS 3) Pulling force: 30 kN (3,000 kg) Broaching speeds: 3 m/min & 6 m/min Nedsw D E Twepfx Ac Hedb Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Table size / working area: 430 mm x 320 mm / 340 mm x 220 mm Table aperture: Ø 90 mm for standard broach holders “Rausch system” Workpiece diameter: unlimited (removable coolant swing system) Broaching capacity / keyway width: up to 20 mm in steel (from 16 mm broaching tool width only with stepped tool shank) Dimensions (H x W x D): 1370 mm x 680 mm x 750 mm (h = table height from floor without superstructures) Motor: 2.5 kW / 3.0 kW, 2-stage, for 2 operating speeds Power supply: 400 Volt / 50 Hz Features: - Gear motor drive with 2 operating speeds - Reinforced pull bridge made of tool steel for higher pulling forces - Safety door with lock, interlock check and safety monitoring - Easily removable chip chute with tool removal guard and storage option - Externally adjustable tool length system (machine-cross reproducible) - Protective cover for stroke adjustment and electrical switch units - Oil-tight storage surface on the control cabinet - Electric detection of clamping jaws (tool removal check to prevent unintentional return of pull bridge; added safety for operator & tool) - Integrated coolant system with electrically controlled solenoid valve and drain tap - Coolant swing system with automatic coolant control via swing arm - Extra reinforced chip basket and chip screen with magnetic insert - Stainless steel operator panel with durable labeling - 4 central lubrication points for trapezoidal spindle drive with manual grease gun - Electrical pre-installation for external control element (16-pin connector) - Provision for automatic clamping jaw opening for profile broaching via roller lever - Machine documentation with "CE" declaration of conformity Optional accessories: - Automatic clamping jaw opener for easier tool removal during profile broaching - Open 3-sided splash guard cabin (W x D x H) 700 x 350 x 600 mm - External electrical control unit for broaching and return as well as emergency stop function Note: The machine is 100% compatible with all Rausch broaching machines of the RS 3, RS 4 and RS 6 series in the same performance class available on the market. All fixtures, tools or broach holders can be used without restriction. General The twin-spindle drive ensures a smooth and central pulling point as well as a constant broaching speed. The machine is primarily designed for the production of keyways up to 20 mm (from 16 mm slotting tools only with stepped tool shanks). Due to its design, the machine can be quickly and easily set up for broaching with flat broaching tools to produce keyways. Thanks to the universally designed pull bridge and machine table, both profile and flat broaching tools can be used. Profile broaching is possible without the use of additional draw heads, using simple centering bushes. Broaching tools and holders suitable for the machine are available on request.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1966, skupna masa: 7.000 kg, vhodna napetost: 380 V, dolžina bročanja: 1.500 mm, število bročirnih položajev: 3, premer obdelovanca (maks.): 575 mm, skupna višina: 5.100 mm, Manufacturer: Karl Klink Model: RSI 20x1500 Year of manufacture: 1966 Weight: approx. 6,700kg Machine No.: 2455 General / Technical Data: Ndjdpfewql Rvex Ac Hjb Used vertical hydraulic internal broaching machine with 3 broaching positions Pulling force: 20,000 kg Broaching stroke: 1,500 mm Broaching positions: 3 Distance between broaching positions: 2 x 145mm Clamping diameter for broach pullers: 3 x Ø 85mm Clear width between columns: max. 580 mm Cutting speed: hydraulically continuously variable from 1 m/min up to max. 7 m/min Return speed: hydraulically continuously variable from 7 up to max. 25 m/min Machine footprint (W x D x H): approx. 1,500 x 2,100 x 4,600 mm (max. height 5,100 mm with tool loader raised) Power supply / Connected load: 380 Volt 50 Hz / 14 kW Accessories / Special Features: The machine is equipped with a workpiece table featuring 3 bores for 3 broaching positions. The tool clamping system is designed for mechanical spring-locking in the pull bridge and loader. The machine is fitted with an integrated coolant system. Remarks: The machine is designed for use in series production; for optimum utilization, installation in a pit (foundation) is ideally required, or alternatively, on a platform. Broach pullers and knock-out devices available on request. The machine can be inspected under power at our facility. General Information: We constantly have a large selection of around 80 used broaching machines with pulling forces ranging from 3,000 kg to 63,000 kg in both horizontal and vertical configurations in stock. A significant number of the broaching machines in stock are available for demonstration. If required, we can also offer you used equipment such as broach pullers, knock-out devices, broaching tools, and other specific accessories. We are a contract broaching operation by trade and, with over 50 years of experience in broaching technology, can assist you with any technical queries you may have.

Leto izdelave: 1999, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal Broaching Machine Model: RIW 10x1600x400 Weight: 2,700 kg General / Technical Data: Horizontal hydraulic internal broaching machine in nearly new condition, equipped with a tool support system, ideal for the use of flat broaching tools. Broaching stroke: 1,600 mm Pulling force: 10,000 kg (100 kN) Mounting in drawbridge: Ø 85 mm cylindrical Ndjdpfx Acsr A Hcbj Heb Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (limited by tool pan housing) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine footprint (W x D x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (excluding work area) Power supply: 400 V, 50 Hz Connected load: 9 kW Equipment: • Machine features electric control for the broaching movement with both manual and automatic operation • Integrated coolant and cutting fluid system • Tool support system for flat broaching tools (no feed mechanism) • Broaching slide with draw head mounting is equipped with flat guides on both sides Accessories: • 1 universal draw head for flat shanks from 3 mm up to max. 25 mm width and a maximum pulling force of 10 kN (10,000 kg) • Complete machine documentation, as well as CE declaration of conformity Remarks: The machine is ideal for producing keyways. Thanks to the combination of the machine's stable bed and the tool support system, it is particularly well suited for easy and fast use of flat broaching tools. The machine has seen very little use and is in like-new condition. The machine is available for inspection at our warehouse and is ready for demonstration under power. Our direct contact details, as well as further information about the machine, can be found in the attached PDF document.

Stanje: dober (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SM2021609, vrsta vhodnega toka: trifazni, skupna širina: 1.900 mm, skupna dolžina: 3.800 mm, vhodna napetost: 380 V, moč servomotorja: 4.000 W, skupna masa: 2.150 kg, Polavtomatski stroj za lepljenje škatel SOOME SMZX-2800 (Aktiviran 2023) / Semi-automatic folder gluer machine SOOME SMZX-2800 (Activated 2023) Prodamo izjemno ohranjeno in minimalno rabljeno linijo – polavtomatski stroj za lepljenje kartonskih škatel proizvajalca HEBEI SOOME. Stroj je bil proizveden leta 2021, montiran konec leta 2022 in uradno aktiviran v proizvodnji šele leta 2023. Zaradi zaprtja obrata je stroj sedaj na voljo za prodajo. Stroj je masivne izdelave (preko 2 toni), izjemno zanesljiv in omogoča hitro lepljenje velikih formatov valovitega kartona (do neverjetnih 2800 mm širine). Glavne tehnične specifikacije: Proizvajalec: HEBEI Soome Packaging machinery co., ltd. Tip stroja: SOOME SMZX-2800 Letnik proizvodnje: 2021 (Aktivacija: 2023) Nsdpfxozil Tle Ac Hsdb Maksimalna širina kartona: 2.800 mm x 1.500 mm Hitrost delovanja: 0 - 75 m/min Napajanje in moč: 3×380 V/AC, instalirana moč 4.0 kW Dimenzije stroja: 3.800 x 1.900 x 1.700 mm Teža stroja: 2.150 kg Stroj se nahaja v Sloveniji (Celje). Električna instalacija je bila prenovljena leta 2023, naprava je priklopljena in pripravljena na pregled. Kupec sam organizira demontažo in transport. Na voljo imamo tudi tiskarski stroj za karton (Flexo Printer EMproject 89, stroj za razrez papirja (Slitter Rewinder) YYS-I, letnik 2023).

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SM240101, vrsta vhodnega toka: trifazni, skupna širina: 3.500 mm, skupna dolžina: 14.000 mm, vhodna napetost: 380 V, moč servomotorja: 15.500 W, skupna masa: 7.000 kg, dolžina rezanja (maks.): 1.650 mm, Popolnoma avtomatski lepilec škatel z zaklepom dna SOOME 1650 (2024) / Fully Automatic Folder Gluer with Bottom Lock SOOME 1650 (2024) Ndedpfxjzil Nyj Ac Hjb Prodamo praktično nov, popolnoma avtomatski stroj za lepljenje in zaklepanje dna škatel (Bottom Locking Type) proizvajalca HEBEI SOOME. Stroj letnika 2024 je v vrhunskem stanju in primeren za najzahtevnejšo embalažo. Tip: Automatic Folder Gluer, Bottom Locking Type SOOME GD-B 1650 Letnik: 2024 Efektivna širina: 1650 mm Moč: 15.5 kW Stanje: Odlično, kot nov. Stroj se nahaja v Sloveniji (Celje). Kupec sam organizira demontažo in transport. Na voljo imamo tudi ostalo opremo za kartonažo Flexo Printer EMproject 89, stroj za razrez papirja (Slitter Rewinder) YYS-I, letnik 2023).

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: C12302A210I-D, skupna dolžina: 4.550 mm, skupna višina: 2.500 mm, moč servomotorja: 35.000 W, skupna masa: 6.000 kg, višina izdelka (maks.): 2.500 mm, vhodna napetost: 380 V, Prodamo industrijski avtomatski stroj za razrez papirja (Paper cutting machine) YYS-I-1750, letnik 2023. Stroj je v odličnem stanju, izjemno zmogljiv (51 kW) in primeren za visoko produktivno obdelavo papirnih rol. Priložen je tudi popolnoma nov rezervni nož. Nedpfx Aszik Dpsc Hedb Stroj se nahaja v Sloveniji (Celje). Kupec sam organizira demontažo in prevoz. Za resnega kupca ob ogledu stroja možnost dogovora o končni ceni. Na voljo imamo tudi preostalo opremo za proizvodnjo kartonaže (dvobarni tiskarski stroj, zlagalno-lepilna linija).

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Machine used in a fish processing plant, previously used for washing squid. In very good condition, like new. Ndodjv T Rlljpfx Ac Hob

Leto izdelave: 2022, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, lastna masa: 550 kg, skupna dolžina: 3.210 mm, skupna širina: 1.162 mm, skupna višina: 2.050 mm, izpraznilna višina: 1.080 mm, številka stroja/vozila: 2211410, TEHNIČNE PODROBNOSTI Pretok lahke zelenjave: maks. 400 kg/h Pretok težke zelenjave: maks. 800 kg/h PODROBNOSTI O STROJU Napetost: 3~ 400 V Frekvenca: 50 Hz Priključna moč: 7 kW Varovalka: 25 A Vsebnost vode: 500 l Stopnja zaščite: IPX4 Dimenzije in teža Dimenzije (D x Š x V): 3.120 x 1.162 x 2.050 mm Teža stroja: 550 kg Višina nakladanja: 1.140 mm Višina razkladanja: 1.080 mm OPREMA Sistem za prenos z vodo (Barbotage) Ndjdpfsz Ahnrex Ac Heb Črpalke s frekvenčnim regulatorjem Invertersko krmiljenje Izvedba iz nerjavečega jekla Transportni trak z izhodom za izdelek Dodatno izpiranje preko razpršilne naprave Nogice, nastavljive po višini Spiralni sistem za usmerjanje vode Podaljšana in povišana cona za izhod izdelka, posebna izvedba Podaljšek cone za izhod izdelka: 200 mm Dokumentacija

Leto izdelave: 2021, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, model krmilnika: PLC Siemens S7, proizvodna zmogljivost: 4.000 enota/h, Brez minimalne cene – zagotovljen nakup po najvišji ponudbi! TEHNIČNE PODROBNOSTI Pretok: 4.000 enot/uro Mere zaporke: 30 × 10 mm Mere PET-posode (20 ml): 26,05 × 48,38 mm PODROBNOSTI O STROJU Nadzorni sistem: PLC Siemens S7 Sortirni lijak Višina transportnih verig: pribl. 1.000 mm ± 50 mm Moč: 2,5 kW Napetost: 380/400 V Varovalka: 16 A OPREMA Centrifugalni sortirni stroj za zaporke iz nerjaveče jekla AISI 304 z senzorjem za raven zapork Žleb za dovajanje zapork iz nerjaveče jekla AISI 304 z elektronskim senzorjem za zaznavanje nepravilno nameščenih zapork Ročna naprava za odstranjevanje nepravilno nameščenih zapork Sistem za pobiranje in namestitev Glave za zapiranje z magnetno spojko in stožcem za zapiranje Centrirni obroči za grla steklenic s konicami Motor s frekvenčnim pogonom Posebna izvedba območja dviga za obdelavo posod, ki so zunaj območja nastavitve višine Naprava proti vrtenju Zaščitna naprava za pokrivanje posod Električna nastavitev višine zgornjega dela stroja za zapiranje Aksialno nastavljiv vijak Ndsdpfjzyihhsx Ac Hob Električna omarica Pogonska enota stroja s frekvenčnim pretvornikom Danfoss VLT 2800 Na dotik občutljiv zaslon za upravljanje Pnevmatski sistem FESTO Zunanji premer podajalnega krožnika: 800 mm Podajalni krožnik s frekvenčnim pretvornikom in lastnim pogonom Podaljšek transportnega traku na vhodu stroja: 500 mm Podaljšek transportnega traku na izhodu stroja: 200 mm Nadzor s senzorji Mehanski sistem za transport zapork s rezervoarjem, nameščenim na tleh Vertikalni transportni sistem iz nerjaveče jekla AISI 304 s transportnim trakom za zaporke

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, proizvodna zmogljivost: 6.000 enota/h, Stroj deluje brezhibno in je bil ves čas pod nadzorom vzdrževalnega servisa podjetja Quadient. Zadnje poročilo o servisu iz decembra 2025 je priloženo! TEHNIČNE PODROBNOSTI Nsdjzzqabepfx Ac Hsdb Največja hitrost obdelave: 6.000 pošiljk/uro Največja hitrost obdelave dokumentov: 6.000 dokumentov/uro Največji mesečni volumen: 300.000 zaprtih ovojnic/mesec Največja debelina paketa: 10 mm Debelina paketa za minimalni prosti prostor: manj kot 3 mm Minimalni prosti prostor v globino pri debelini paketa manj kot 3 mm: 6 mm Minimalni prosti prostor v širino pri debelini paketa manj kot 3 mm: 16 mm Debelina paketa za povečan prosti prostor: 3–6 mm Minimalni prosti prostor v globino pri debelini paketa 3–6 mm: 12 mm Minimalni prosti prostor v širino pri debelini paketa 3–6 mm: 19 mm Kapaciteta posode za ovojnice do formata C5: največ 800 kosov Kapaciteta posode za ovojnice formata C4: največ 500 kosov Minimalna teža ovojnice do formata C5: 70 g/m² Minimalna teža ovojnice nad formatom C5: 90 g/m² Največja teža ovojnice: 110 g/m² Možnost nad polnjenja med delovanjem Minimalna širina ovojnice: 225,5 mm Največja širina ovojnice: 330 mm Minimalna globina ovojnice: 98,5 mm Največja globina ovojnice: 254 mm Minimalna dolžina zložke: 32 mm Največja dolžina zložke: 65 mm Minimalna globina pokrova ovojnice: 10 mm Največja globina pokrova ovojnice: 25 mm Minimalna odprtina v predelu pokrova: 70 mm Kot zložke: 50–90° Kot pokrova: 5–20° PODROBNOSTI O STROJU Število izvedenih operacij: 3.617.695 Napetost: 230 V AC Frekvenca: 50 Hz Varovalka glave za zapiranje ovojnic: 6,3 A Delovna temperatura: 18–28 °C Relativna vlažnost zraka: 30–80 % OPREMA Podajalnik Tower s 2 postajami CIS bralnik Bralnik Datamatrix Podajalnik prilog do formata A4 Modul za zapiranje ovojnic Transportni trak Preureditev s stikalom C4 Float Možnost lepljenja z destilirano vodo Primerna podstavna omara