Stroj za izvlačenje

Varinelli BV 25 x1600 x 500

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2015, Max. premer obdelovanca: 400 mm Tsdpfxoxy Ac Ss Aiqec Max. dolžina obdelovanca: 300 mm Max. premer vpenjalne glave: 500 mm Obodni premer: 520 mm Pomik osi X: 1.110 mm Pomik osi Z: 595 mm Glavno vreteno: moč (pri 40 / 100 % ED): 47/34 kW Glavno vreteno: navor (pri 40 / 100 % ED): 600 Nm Glavno vreteno: največje število vrt./min: 2.850 Krmilje: Fanuc 31i Brez Y osi

Stanje: rabljeno, TECHNICAL DATA - Max. capacity: 40 [t] - Max. workpiece diameter: 40 [mm] - Spindle diameter: 80 [mm] - Spindle length: 120 [mm] - Max. tool diameter: 250 [mm] - Dimensions (L x W x H): 2400 x 2100 x 2200 [mm] - Weight: 7100 [kg] EQUIPMENT - CNC control (Siemens-based) - Tailstock device Tedpfxsuhb Uhe Aiqjc - Coolant tank with pump - 2 boring wheels 80, diameter: 260 [mm]

Stanje: rabljeno, Leto izdelave: 1973, Spindle diameter: 130 mm X travel: 3,000 mm Y travel: 2,000 mm Total power requirement: 4.5 kW Machine weight approx.: 30 t Boring spindle diameter: 130 mm Spindle taper: SK 50 Working area: X – Column longitudinal travel: 3,000 mm Y – Spindle housing vertical travel: 2,000 mm Z – Spindle stroke: 1,000 mm Table size (lower): 3,300 x 2,400 mm Load capacity per m²: 10 t/m² Mounted table approx.: xx,000 mm Min./Max. position of working spindle above table: 770 / 2,770 mm Feed rate: 0.9 – 2,000 mm/min Rapid traverse for spindle headstock and column: 5,000 mm Quill feed: 0.5 – 1,200 mm/min Spindle speed range, partially infinitely variable: 4.5 – 1,250 rpm Machine weight: approx. 30,000 kg Accessories / Special equipment: • Heidenhain 3-axis digital readout, hardened guideways, ball screws Tjdpfx Ajt Hwt Soiqoc • Infinitely variable spindle speeds and feeds, individually motorized feed drives • Operator’s traveling platform, pendulum panel control, manual hand panel, platform • Hydrostatic column displacement • Planed clamping plate 3,200 x 2,500 mm with T-slots, auxiliary table approx. 1,400 x 2,600 x 900 mm (H), one side face machined • Hydraulic clamping for column/carriage, motorized tool clamping • Extensive accessories including tool holders with and without tools • Separate chip extraction system, clamping aids, 1 clamping angle plate and plates, and much more

Leto izdelave: 1971, stanje: zelo dobro (rabljeno), Horizontal Internal Broaching Machine Arthur Klink RIW 16x1800 -WAG 718- Manufacturer: Arthur Klink Model: RIW 16 x 1800 Tjdpshpqquefx Aiqoc Year of manufacture: 1971 Max. pulling force: 16 t Max. stroke: 1800 mm Max. cutting speed: 7 m/min Max. return speed: 25 m/min Max. tool diameter: Ø 95 mm Weight: 4.8 t

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, obratovalne ure: 3.000 h, potovalna razdalja osi X: 6.100 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 950 mm, CNC Portalna rezkalna stroj – popolnoma obnovljen s strani REM (2021) Zmogljiv in vsestransko uporaben težki rezkalni stroj, ki so ga REM-jevi strokovnjaki v letu 2021 v celoti posodobili z najnovejšo krmilno enoto Heidenhain TNC 320. Pripravljen za takojšnjo uporabo v proizvodnji. GLAVNE TEHNIČNE SPECIFIKACIJE: • X-os (prečni pomik): 6.000 mm • Y-os (vertikalni pomik glave): 2.000 mm • Z-os (osni pomik sani): 950 mm • Dvojna vretena | Rotacija glave: 360° • Hitrost vretena: 1.000 – 4.000 min⁻¹ • Konus vretena: ISO 50 (samodejno zaklepanje/odklepanje) • Dimenzije glave: 290 × 290 mm • Moč motorja vretena: 15 kW (DC) • Teža stroja: pribl. 32 t • CNC krmilje: Heidenhain TNC 320 Tjdon D N H Tepfx Aiqec ZAKAJ IZBRATI REM? ✔ Stroj v celoti pregledan in preizkušen v delovnem stanju ✔ Sodobna CNC nadgradnja – nova električna napeljava, novi pogoni ✔ Na voljo dokumentacija in tehnična podpora ✔ Izvoz po vsem svetu | Konkurenčne cene pošiljanja Idealno za obdelavo težkih komponent v letalski, energetski in težki industriji. Kontaktirajte nas za popolne tehnične podatke, fotografije in video predstavitev.

Stanje: rabljeno, Leto izdelave: 2000, Tehnične podrobnosti: Premer struženja: 800 mm Dolžina struženja: 2965 mm Maks. premer struženja nad suportom: 520 mm Vreteninska odprtina: 92 mm Območje vrtljajev: 3 - 1800 obr/min Glava vretena: Velikost 11 Skupna potrebna moč: 37 kW Približna teža stroja: 6,5 t Potrebni prostor cca: 5,2 x 2,2 x 1,9 m Ciklična kontrola MTC K 3-čeljustna vpenjalna glava ROTAS Ø 400 mm Čelna plošča RÖHM Ø 630 mm Tedpjxxig Ujfx Aiqjc 4-pozicijski nosilec orodja PARAT 1 fiksna luneta Sistem za hlajenje in odstranjevalec ostružkov

Stanje: dober (rabljeno), Leto izdelave: 1998, Press force: 315.00 t Stroke: 500 mm Throat: 425 mm Daylight (table to ram, stroke up): 1,000 mm Table surface: 1,200 x 815 mm Table height above floor: 800 mm Ram surface: 1,100 x 700 mm Tsdpfx Aijv Rwu Uoqec Speed down: 48 mm/s Speed up: 330 mm/s Working speed: 19 mm/s Oil volume: 1,600 l Power requirement: 82.0 kW Weight: 23.00 t Dimensions (W x D x H): 2.4 x 2.8 x 4.0 m Permitted for manual loading according to CE standard. Equipped with oil-hydraulic drive, controllable dependent on pressure/time and stroke, front light curtain (Sick), two-hand operation.

Stanje: rabljeno, Leto izdelave: 1983, Vrtalna zmogljivost v jeklu (-Ø 50 mm) Iztegnjenost 1500 mm Višina obdelovanca - maks. 1380 mm Vrtalna zmogljivost v litoželezu (-Ø 60 mm) Razdalja od središča vretena do stebra 320 - 1250 mm Območje nihanja +/- 180° Vpenjalna površina osnovne plošče 2640 x 1000 mm Navor na vretenu 310 Nm Premer vrtalnega vretena / vpenjalni stožec 75 mm / MK 5 Tjdpotv Ikljfx Aiqjc Hod vrtalnega vretena 310 mm Hitrosti vretena 28 - 2500 min⁻¹ Pomik: 0,05 - 2 mm/obrat Moč pogona 4 kW Teža stroja pribl. 4,3 t Potrebni prostor pribl. 3,2 x 1 x 2,75 m Kockasta miza 500 x 500 x 500 mm,

Stanje: dober (rabljeno), The driven tools listed here, VDI 50, are designed for a tool turret manufactured by SAUTER. They are in good condition and fully functional, previously used on a GILDEMEISTER CTX 600 CNC lathe. 6 x driven tools, straight type, manufacturers NACKE + WTO, VDI 50 for SAUTER tool turret: Article No.: XVI 24275 1 drilling and milling tool, straight type, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.1, collet Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €545.00 plus statutory VAT Article No.: XVI 24277 1 drilling and milling tool, straight type, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.3, collet Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €400.00 plus statutory VAT Article No.: XVI 2687 Tjdpfx Aijbql S Hjqec 1 drilling and milling tool, straight type, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT Article No.: XVI 2687 1 drilling and milling tool, straight type, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT Article No.: XVI 2687 1 drilling and milling tool, straight type, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT Article No.: XVI 2687 1 drilling and milling tool, straight type, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Leto izdelave: 1999, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal Broaching Machine Model: RIW 10x1600x400 Weight: 2,700 kg General / Technical Data: Horizontal hydraulic internal broaching machine in nearly new condition, equipped with a tool support system, ideal for the use of flat broaching tools. Broaching stroke: 1,600 mm Pulling force: 10,000 kg (100 kN) Mounting in drawbridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (limited by tool pan housing) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine footprint (W x D x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (excluding work area) Power supply: 400 V, 50 Hz Connected load: 9 kW Equipment: • Machine features electric control for the broaching movement with both manual and automatic operation • Integrated coolant and cutting fluid system • Tool support system for flat broaching tools (no feed mechanism) • Broaching slide with draw head mounting is equipped with flat guides on both sides Tsdpjr A Hcbefx Aiqsc Accessories: • 1 universal draw head for flat shanks from 3 mm up to max. 25 mm width and a maximum pulling force of 10 kN (10,000 kg) • Complete machine documentation, as well as CE declaration of conformity Remarks: The machine is ideal for producing keyways. Thanks to the combination of the machine's stable bed and the tool support system, it is particularly well suited for easy and fast use of flat broaching tools. The machine has seen very little use and is in like-new condition. The machine is available for inspection at our warehouse and is ready for demonstration under power. Our direct contact details, as well as further information about the machine, can be found in the attached PDF document.