Presto Gmbh & Co. Kg Cc 36 M, Z Vezavo Iz Poliestrske Preje nakup rabljenega (130.575)

Stanje: dober (rabljeno), Leto izdelave: 2010, obratovalne ure: 3.641 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 36 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.080 mm, širina bale: 1.100 mm, višina bale: 750 mm, moč: 15 kW (20,39 KM), volumenski pretok: 90 m³/h, Technical Data – Baler: Manufacturer: Presto GmbH & Co. KG Model: CC 36 M Year of Manufacture: 2010 Operating Hours: 3,641 h Main Press Force: 36 t Specific Pressing Force: 467 N/cm² Feed Hopper Dimensions: 1,080 x 1,100 mm (L x W) Kdsdpfx Aeu Thh Eeg Tsr Cycle Time: 34 seconds Filling Volume per Press Cycle: 0.85 m³ Theoretical Throughput: 90 m³/hour Throughput under Operating Conditions (at material bulk density of 35 kg/m³): approx. 51 m³/hour Bale Dimensions: 1,100 x 750 mm (W x H), length variable Drive Power: 15 kW Binding: 4-fold vertical, semi-automatic, with polyester twine Throughput at Bulk Density of: - 35 kg/m³: 1.8 t/hour - 60 kg/m³: 2.5 t/hour - 100 kg/m³: 3.1 t/hour Transport Dimensions (Baler only): 4,200 x 1,640 x 2,200 mm (L x W x H) Machine Weight (Baler): approx. 4 t Remarks: The baler has been function-tested in our workshop, subsequently stored, and is thus available at short notice. Complete machine documentation (operating manual, CE certificate, electrical and hydraulic schematics) is available. Viewing by appointment is possible. We assume no liability for the technical specifications or possible errors.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, moč: 9,7 kW (13,19 KM), Technical Data – Cardboard Shredder (2-Shaft Shredder): Manufacturer: Presto GmbH & Co. KG Model: PZA Ksdpfx Aeu Tha Iog Todr Year of Manufacture: 2007 Throughput Volume: 130 m³/hour Speed: 37/9 rpm Motor Power: 7.5 / 2.2 kW Electrical Connection: 32 A Internal Shredder Dimensions: 1,490 x 1,320 x 530 mm (L x W x H) External Shredder Dimensions (without cover): 2,308 x 1,320 x 685 mm (L x W x H) Machine Weight: 0.45 t System Application: The PZA-type cardboard shredder was used in a Dutch logistics center to pre-shred loose, set-up cartons from the returns department, which were then pressed into bales. Cartons were manually placed onto the infeed conveyor and transported directly to the shredder by a sliding belt conveyor for shredding. The pre-shredded cartons were then conveyed over several hundred meters to the baling press for compaction. Scope of Delivery: 1 piece Presto Cardboard Shredder (2-Shaft Shredder), model PZA Notes: The cardboard shredder was an integral part of the disposal line and was well maintained to ensure high availability in the returns department. The machine is in good condition and immediately operational. Price is per unit ex works our warehouse in Siddeburen, Netherlands. Full documentation (operating manual, CE declaration, electrical/hydraulic schematic) is available. Inspection is possible by appointment. We assume no liability for the accuracy of the technical data or for possible errors.

Leto izdelave: 2015, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: A-150016, AUTOMATED ADHESIVE APPLICATION MACHINE, SURFACE GANTRIES AND AUTOMATED INSERTING UNIT FOR METAL SHEET INLAYS Kodpsyt Nm Sofx Ag Tedr This system is part of a larger production line; please also refer to our other listings for more information. The offered system includes 3 provisioning stations for cover layers, an automated adhesive application machine for sandwich bonding, a lay-up conveyor for the manual assembly of the inlay/ribbing, surface gantries for the handling of cover layers, and an automated inserting unit for metal sheet inlays/reinforcement points. COMPONENT DIMENSIONS (from previous production): L/W min: 2000mm x 1500mm L/W max: 8000mm x 2500mm H min: 12mm H max: 60mm MATERIALS (from previous production): GRP, sheet metal, plywood, wood/PU strips, PVC, Styrofoam GLUING PORTAL FOR CONTOUR & SURFACE APPLICATION (of cover layers & inlays): Number of needle valves for surfaces: 104 Number of needle valves for contour: 1 Adhesive system: 1C-PUR Number of nozzles for water spray unit: 8 ANCILLARY UNITS: Climatic chamber (storage for 1C-PUR adhesive) Vacuum pump for surface gantries Punching unit

Leto izdelave: 2022, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3352, RAMPF dozirna naprava z mešalnim sistemom MS-S (statični) Uporabljeni material: Rampf RAKU PUR 21-2080-1 komponenta A in komponenta B Dozirna glava je bila nadgrajena z Y-vozičkom. - Ročni pomični mehanizem za mešalni sistem - RAMPF mešalni sistem MS-S (statični) - Nadzor tlaka za komponenti A + B - Tlačna posoda za material 50 l za komponento A - Merjenje nivoja za komponento A + B - Kroženje materiala do dozirne črpalke za komponenti A in B - Evakuacija materiala za komponento A - Vakuumska črpalka 25 m³/h - Posoda za odpadke 60 l s cevjo -> Lovilne posode so bile zamenjane z mobilnimi posodami. Ksdpezgck Nefx Ag Todr - Voziček za posodo za odpadke ali spiranje - Ogrodje za posode/strojno ogrodje, trojno - Delovna miza cca 1.400 mm x 500 mm s ploščo - Prečrpovalna postaja za pokrovček sodčka komponente A - Prečrpovalna postaja za sodček s čepom komponente B - Dozatorsko krmiljenje (Siemens PLC-krmiljenje na osnovi S7-300) - Precizna batna dozirna črpalka za komponenti A in B - EKDP A komponenta 257 ccm - EKDP B komponenta 64 ccm --> 1 x rezervni EKDP A in EKDP B sta vključena. Ta sta bila pri Rampf celovito obnovljena v zameno (glej sliko). Opomba: Zalivna naprava se nahaja na naši lokaciji v Avstriji.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, volumenski pretok: 16.000 m³/h, moč: 15 kW (20,39 KM), Mobilna filtrirna enota 15 kW, odsesalna zmogljivost 16.000 m³/h za agresivne prahove s predkomornim izločevalnikom. Montaža v približno 10 minutah. Čiščenje filtrskih kartuš z impulzi stisnjenega zraka. 16 filtrovskih kartuš s površino 15,6 m², Bio razred M. Odvzem prahu z big bag vrečo. Filter je sestavljen iz dveh posameznih delov, ki ju sestavite z viličarjem. Povezava prek 6 hitrozapiralnih zaponk in 2 povezovalnih vtičev. Na zadnjo stran filtra se lahko priključi cev ali odsesovalna cev. Kdedpfx Agow Ivpve Tor

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, volumenski pretok: 16.000 m³/h, moč: 15 kW (20,39 KM), Mobilna filtrirna enota 15 kW, odsesalna zmogljivost 16.000 m³/h za agresivne prahove s predkomornim izločevalnikom. Montaža v približno 10 minutah. Čiščenje filtrskih kartuš z impulzi stisnjenega zraka. 16 filtrovskih kartuš s površino 15,6 m², Bio razred M. Odvzem prahu z big bag vrečo. Filter je sestavljen iz dveh posameznih delov, ki ju sestavite z viličarjem. Povezava prek 6 hitrozapiralnih zaponk in 2 povezovalnih vtičev. Na zadnjo stran filtra se lahko priključi cev ali odsesovalna cev. Kedpfxsw Ivp Nj Ag Tjdr

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, volumenski pretok: 16.000 m³/h, moč: 15 kW (20,39 KM), Mobilna filtrirna enota 15 kW, odsesalna zmogljivost 16.000 m³/h za agresivne prahove s predkomornim izločevalnikom. Montaža v približno 10 minutah. Čiščenje filtrskih kartuš z impulzi stisnjenega zraka. 16 filtrovskih kartuš s površino 15,6 m², Bio razred M. Odvzem prahu z big bag vrečo. Filter je sestavljen iz dveh posameznih delov, ki ju sestavite z viličarjem. Povezava prek 6 hitrozapiralnih zaponk in 2 povezovalnih vtičev. Na zadnjo stran filtra se lahko priključi cev ali odsesovalna cev. Kdsdpfx Ajwxlygsg Tjr

Leto izdelave: 2020, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Na prodaj sta 2 ločeni enoti. Obe enoti sta bili kupljeni v začetku leta 2020. Enota 1: - 4,0 m sesalni režni kanal AS 590 iz aluminija z neoprensko tesnilno ustnico - 1 kos priključni nastavek DN 315 - 1 kos sesalni voziček Rollfix in nastavek na sredini za cev DN 250 Cena: 620 € brez DDV. Kdedpfx Ajzuwcvog Ter Enota 2: - 10,0 m sesalni režni kanal AS 740 iz aluminija z neoprensko tesnilno ustnico - 1 kos priključni nastavek DN 355 - 1 kos sesalni voziček Rollfix in nastavek na sredini za cev DN 300 Cena: 1340 € brez DDV.

Stanje: rabljeno, Leto izdelave: 2006, Stiskalni stroj Proizvajalec: Schuler Pressen GmbH & Co. KG, Göppingen, Nemčija Tip: SAL 250-1.9 Mark II Serijska številka: A/260156 (št. stroja 2006-260156) Leto izdelave: 2006 Stiskalna sila: 2.500 kN (250 ton) Število hodov: 80–400 hodov/min Pogon: 51 kW pri 2.000 min⁻¹ Hod batnice: 30 mm Nastavitev batnice: 100 mm Dvig batnice: 75 mm Vgradna višina (od mizne plošče do batnice, spodnji položaj batnice, zgornja nastavitev): 550 mm Dimenzije mizne plošče: 1.950 x 1.060 mm (po skici) Površina batnice: 1.950 x 800 mm (po skici) Stisnjen zrak: 5,5 bar Skupna masa (brez podajalnika): 48.000 kg Krmilni sistem: SYS PACO 8000 Zvočno izolacijsko ohišje (oranžno) Enota za podajanje traku Proizvajalec: Kohler Maschinenbau GmbH, Friesenheim, Nemčija Tip: KRS 18.260/19-2000.2H-BF1 Serijska številka: 40 871 Leto izdelave: 2006 Priključna moč: 15,5 kW Napajalna napetost: 400 V, 50 Hz Razvijalec Proizvajalec: Kohler Maschinenbau GmbH, Friesenheim, Nemčija Model: 18 260-1000.2 Serijska številka: 40 466 Leto izdelave: 1984 Kdjdpfxezil S Is Ag Tjr Priključna moč: 8 kW Napajalna napetost: 380 V, 50 Hz

Stanje: rabljeno, Linearni modul, linearna os, portalna os z magnetnim pogonom, linearno vodilo za magnetni linearni motor, električna sani Proizvajalec: GEIGER Handling GmbH & Co. KG Tip: Motion Liner 20.0 Serijska št.: 228773 2207 02659 Leto izdelave: 2022 z 2x linearnim vodilom REXROTH N R160 520 431 PTS / FD274 / RO10 Kdsdjzinxqepfx Ag Tjr Dolžina vodilne tirnice: 3790 mm Dolžina osnovnega telesa – skupna dolžina: 3980 mm - Standardno linearno vodilo BOSCH REXROTH serije R1605 - vodilna tirnica 15 mm - Profil osnovnega telesa iz jekla 200 x 95 mm - Merilni sistem s kovinskim trakom RSF MS 40.x6 MK (merilna dolžina 3440 mm) - Osnovno telo s posteljo iz permanentnih magnetov za linearni motor Skupne dimenzije D x Š x V: 3790 x 200 x ca. 140 mm Teža: 162 kg (tehtano) Zelo dobro stanje – kot novo, neuporabljeno iz zaloge.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Analytik Jena GmbH+Co. KG TOC/TNb analizator, multi N C 3100 Model: multiNC3100 Stanje: Rabljeno Tehnični podatki: 230V AC 50/60Hz 1000VA Splošno: Obratovalna temperatura: +10 do +35 °C (priporočljivo klimatiziranje) Maksimalna zračna vlaga: 90 % pri 30 °C Zračni tlak: 0,7–1,06 bara Kdedpfx Ajzh Irueg Ter Temperatura shranjevanja: +5 do +55 °C Zračna vlaga pri shranjevanju: 10–30 % (uporabiti sušilo) Maksimalna obratovalna višina: 2000 m Dodatki: Dokumentacija Napajalni kabel IEC Programska oprema

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, TRUMPF Hüttinger GmbH + Co. KG RF generator 13,56 MHz, 20 kW, 1880203, TruPlasma RF 3020 Model: 1880203 Tip: TruPlasma RF 3020 Kdedpfjuykf Asx Ag Tor Tehnični podatki: 400V-480V 50/60Hz 41,8A-34,5A 20 kW

Stanje: dober (rabljeno), WAGNER UGH-Z1-Q 1000 – avtonomni vodilni sistem Za prodajo so na voljo avtonomna transportna vozila (ATV/AGV) vrhunskega proizvajalca ek robotics (prej ek automation) na robustnih podvozijih WAGNER. Vozila so neposredno iz tovarne Mercedes-Benz, kjer so bila uporabljena za natančen in avtomatiziran transport materiala. Zaradi uporabe v avtomobilski industriji so bila ta vozila redno vzdrževana po najvišjih standardih kakovosti in varnosti. Pozneje so bila vozila nadgrajena z modernimi krmilniki z zaslonom na dotik in so v dobrem, čistem stanju. Ta vozila so sestavljena iz izjemno dragocenih in zaželenih industrijskih komponent v kakovosti originalnega proizvajalca. Profesionalni varnostni laserski skenerji: vrhunski senzorji za zaznavanje oseb in ovir. Idealna priložnost za logistična podjetja kot visokokakovosten vir rezervnih delov za obstoječe sisteme, za trgovce z rezervnimi deli ali za ambiciozne projekte avtomatizacije. Tehnični podatki Proizvajalec podvozja: WAGNER Fördertechnik GmbH & Co KG Model/tip: WAGNER UGH-Z1-Q 1000 Nazivna nosilnost: 1.000 kg Skupna teža (vključno z baterijo): 2.980 kg Napetost sistema: 48 V Kjdpfxszklkte Ag Todr »Vse na enem mestu: z veseljem vam ponujamo ustrezno bančno financiranje za vaš projekt.« komplett-konzept.leasingo.de Dodatne izdelke – nove in rabljene – najdete v naši spletni trgovini! Mednarodni stroški pošiljanja na zahtevo!

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 30214501, stružna dolžina: 2.000 mm, skupna dolžina: 12.000 mm, WFL Millturn M60-G/2000 WORKING RANGE Centre distance mm 2000 Swing diameter over cross slide mm 480 MAIN DRIVE Kdedju Hl R Topfx Ag Ter AC drive with 2-speed gearbox Drive power 100% duty cycle kW 60 Max. spindle speed rpm 2600 Max. spindle torque 100% duty cycle Nm 2748 COUNTER SPINDLE DRIVE AC drive with 2-speed gearbox Drive power 100% duty cycle kW 40 Max. spindle speed rpm 3300 Max. spindle torque 100% duty cycle Nm 1830 TOOL CARRIER (Single tool carrier, turning-milling-drilling unit) AC drive, drive power 100% duty cycle kW 25 Max. spindle speed rpm 4000 Max. spindle torque 100% duty cycle Nm 300 Travel perpendicular to X/Z (Y-axis) mm 300 [-125/+175] Swivel angle of milling spindle (B-axis) ° -110/+90 Spindle nose for tools according to DIN 69893 HSK-A63 Spindle diameter at front bearing mm 100 DIMENSIONS Length (max. tool magazine with chip conveyor) m 11*12 Width/height m 4.2/3.5

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Peskalni kontejner 40 čevljev z 9 m peskalnim prostorom, dno s transportnim polžem (zelo nizko vzdrževanje), sistem za reciklažo peskalnega sredstva in filtrirna naprava. Velikost notranjega peskalnega prostora cca: dolžina = 8850 mm; višina = 2485 mm; širina = 2250 mm Možnost: širina z razširitvijo = 3240 mm Ksdpfxszbztao Ag Tjdr Transportna višina cca: 3000 mm Višina tal cca: 440 mm Možnosti: - Stransko odpiranje kontejnerja v dolžini 9 m in 3 m strojna soba - Stranski prizidek za razširitev peskalnega prostora - Odprtje stropa za žerjav (pri stranskem odpiranju ni možno) - Žerjavna proga 500 kg in še veliko več na povpraševanje

Leto izdelave: 2006, obratovalne ure: 5.840 h, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6398921, Prosimo, navedite svojo ponudbeno ceno. Prodaja samo znotraj Evrope, vključno s Turčijo. ----- Tehnični podatki so navedeni v priloženem dokumentu. Ksdey Ta Alepfx Ag Todr Brez embalaže; Če želite napravo razstaviti sami, prosimo, navedite to v vaši ponudbi. Za pravilnost tehničnih podatkov, popolnost pribora in orodij ter za izpolnjevanje vseh varnostnih in okoljskih zahtev, navedenih v predpisih za preprečevanje nezgod, ne prevzemamo nobene odgovornosti. Vsaka garancija je izključena.

Stanje: potreben popravila (rabljeno), Leto izdelave: 2008, Funkcionalnost: nefunkcionalno, številka stroja/vozila: 6034, potovalna razdalja osi X: 7.200 mm, pomik osi Y: 450 mm, pomik po osi Z: 590 mm, hitro pomikanje X-os: 50 m/min, hitri pomik os Y: 25 m/min, hitri pomik na osi Z: 25 m/min, nazivna (navidezna) moč: 45 kVA, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: Bahnsteuerung iTNC 530, skupna višina: 2.900 mm, skupna dolžina: 12.500 mm, skupna širina: 4.810 mm, skupna masa: 14.000 kg, hitrost vretena (min.): 100 obr/min, največja hitrost vretena: 12.000 obr/min, obratovalni tlak: 7 letvica, The BZ 7000 is designed exclusively for milling, drilling, countersinking, reaming, and thread cutting of metals, aluminum, plastics, and wood (chipboard and solid wood). URBAN CNC Machining Center BZ 7000 • Year of manufacture: 04/2008 • Control: HEIDENHAIN contouring control iTNC 530 • 4 axes • Travel paths X / Y / Z axes: 7200 / 450 / 590 mm • Working area X / Y / Z axes: 7000 / 400 / 350 mm • Weight: 14 t Equipment - Robust base structure as a welded frame construction - Linear ball guideways on all axes - Milling spindle unit: 100 - 12,000 rpm, tool holder SK 40 Drives: - X-axis (50 m/min) by rack-and-pinion drive - Y/Z axes (25 m/min) by ball screw drive - B-axis 9,000°/min - Swiveling operator panel - Automatic central lubrication - Traveling tool changer for 12 tool holders SK 40 - Coolant emulsion system - Machine lamp - Safety fence - Electronic handwheel integrated into the control panel - Chip drawers - Laser scanner - Minimum quantity lubrication Technical Data - Compressed air connection: R 3/8" / 6 bar - Device connection: R 1/4" - Operating pressure: approx. 6 bar Kodsyzxfnjpfx Ag Tjdr - Air consumption per cycle: approx. 600 l/min at 6 bar - Electrical connection: 3 x 400 V +/- 5% / 50 - 60 Hz - Control voltage: 24 V DC - Rapid traverse: X-Y-Z 50 – 25 – 25 m/min - Infinitely variable feed: 0 – 5,000 mm/min - Tool change: disc changer with 12 tool stations SK 40 - Tool holder: SK 40 - Tool clamping: hydraulic - Coolant system: emulsion, 300 liters - Spindle speed: 100 – 12,000 rpm - Speed correction: 80 – 120% - Drilling capacity in St 60 / Al: up to 28 mm Ø - Thread cutting capacity in St 60 / Al: up to M24 - Position measuring system: rotary encoder/length measuring system - Positioning accuracy: 0.025 mm - Repeatability: 0.015 mm - Control: HEIDENHAIN iTNC 530 M, 4 controlled axes - Data interface: V 24/RS - 232 - C - Travel paths X / Y / Z axes: 7,200 / 450 / 590 mm - Working area X / Y / Z axes: 7,000 / 400 / 350 mm - Space requirement with safety fence: approx. 60 m² (12.5 x 4.8 m) - Machine weight with accessories: approx. 14 t - Sound emission: average sound pressure level 79 dB (A)

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, pritisk: 6 letvica, trajanje garancije: 60 meseci, notranja širina: 5.000 mm, notranja dolžina: 10.000 mm, notranja višina: 5.000 mm, filtrirna površina: 250 m², volumenski pretok: 16 m³/h, Oprema: dokumentacija / priročnik, osvetlitev, Blast house *up to 5 years warranty* for all blasting media, constructed from a steel frame/insulated panels, with filtration system, recirculating air system, abrasive recycling, 200l pressure blasting pot with automatic refilling, blast hose with dead-man control, breathing air system, LED lighting, wall cladding with 70 shore 4mm fabric-reinforced rubber, sweeping pit with bucket elevator. Abrasive return via sweeping pit with bucket elevator, optionally upgradable to cross screw conveyor with metering hood spanning the full width as a sweeping pit or as a complete flat conveyor floor. Workpiece transport upgradeable: blast trolley with rail track, crane system, roof crane opening, etc. For glass bead blasting of stainless steel, upgradeable with appropriate magnetic drawer or electrically driven magnetic drum separator. Ksdpfxsu Ey Dlj Ag Tjdr For blasting with two different blasting media (ferrous and mineral), upgradeable with magnetic drum separator, final demagnetization stage, and second air sifter for media separation and cleaning. Safety features: emergency lighting with battery backup, emergency stop switches inside the cabin and outside, inspection window to blast chamber, gate/door end switches, dead-man control, pressure vessel quick venting. Warranty up to 5 years on selected components. 50 years of experience and more than 3,000 systems built in blast room engineering.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta upravljanja: Krmiljeno s PLC krmilnikom, vrsta aktuacije: električni, Premer cevi (maks.): 54 mm, Dolžina cevi (maks.): 6.000 mm, Debelina stene cevi (maks.): 4 mm, Kot upogiba (maks.): 195 °, radij upogibanja (maks.): 250 mm, tlak (maks.): 250 letvica, Oprema: CE označba, centralizirani mazalni sistem, hitroizmenjevalna naprava, nožno daljinsko upravljanje, nujno zaustavitev, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with a free-standing bending head can be easily converted for demanding geometries to right- or left-hand bending. The plug-in bending tools enable quick changeovers to different tube sizes. Fast hydraulics to reduce downtimes is a key factor for series production. Kedpfx Ageng Exae Tjdr The clamping pressure for tube holding can be optimally adjusted. The PLC control system (expandable via USB stick) with data storage and the latest X2X interface can store a virtually unlimited number of programs for bending angles, lengths, and rotation angles for up to 50 bending sequences per tube. For monitoring springback values, a freely programmable database for up to 200 materials is available. The machine features two operating modes: In "Simple Bending", the length and rotation of each bend relative to each other are displayed automatically. In "Controlled Bending" mode, the data is stored beforehand, and during the bending process, a continuous target/actual comparison is performed. As a result, mispositioning within a tolerance window is ruled out and user-related error rates are minimized. General error messages are shown in full text on the large screen. The mandrel retraction is programmable and can automatically retract early when the bending angle is reached. The compact drive unit with detachable mandrel holder offers benefits for installation on site as well as for special designs with large tube feed, and is also available as a stationary version with a tool and mandrel rod organizer. The cost-effective alternative to a fully controlled CNC machine. POTENTIAL APPLICATIONS: • Hydraulic tubing installation • Pipeline construction • Plant construction, e.g. for chemical industry • Metal fabrication • Prototype construction • Technical Data: • Bending capacity: Ø 4 to 50 x 4 mm depending on material • Bending radius min/max: 10 mm/140 mm • Minimum bending radii: 1.5 x Ø (standard 2 x Ø) • Multifunction machine control for bending angle setting (0.1°) • Mandrel carrier lengths: 1500/3000/4500/6000 mm (special versions longer available) • Maximum bending angle: 180° • Weight: 800-900 kg (depending on configuration) • Ergonomic operation via safety foot pedal OPTIONAL EQUIPMENT: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Positioning of length and rotation via automatic braking function or manual stops operated by foot pedal • Automatic length and rotation positioning via servo motors • Pneumatic rotation stop • Pipe calculation software • Laser-assisted tool monitoring for checking tool clamping force • 10-inch touchscreen with integrated pipe calculation • Bending radii up to 250 mm • Data transfer by cable (LAN), wireless (WLAN), or USB OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our in-house demonstration room • Consulting and information session at your site • Consultation and processing of leasing/financing purchases through JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance for your machine

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, vrsta upravljanja: Krmiljeno s PLC krmilnikom, vrsta aktuacije: električni, Premer cevi (maks.): 54 mm, Dolžina cevi (maks.): 6.000 mm, Debelina stene cevi (maks.): 4 mm, Kot upogiba (maks.): 195 °, radij upogibanja (maks.): 250 mm, minimalni polmer upogibanja: 9 mm, tlak (maks.): 250 letvica, trajanje garancije: 24 meseci, Oprema: CE označba, centralizirani mazalni sistem, hitroizmenjevalna naprava, nožno daljinsko upravljanje, nujno zaustavitev, THE ECONOMICAL TUBE BENDING MACHINE FOR TIGHT BENDING RADII: The tube bending machine with a free-standing bending head can be easily converted for challenging geometries to bend both right and left. Plug-in bending tools enable quick changeovers to different tube sizes. A high-speed hydraulic system to reduce idle times is a key factor for series production. The clamping pressure for holding the tube can be optimally set. The PLC control system (expandable via USB stick) with data storage and latest X2X interface can store an almost unlimited number of programs for bending angle, length measurement, and twisting angle for up to 50 bending sequences per tube length. For monitoring spring-back values, a freely programmable database for up to 200 materials is integrated. The machine offers two operating modes: In “Simple Bending” mode, the machine automatically displays the length and rotation of each bend. In “Controlled Bending” mode, the data is preloaded and during bending, a continuous target/actual comparison is performed. This eliminates incorrect positioning within a defined tolerance window, thereby minimizing user-related error rates. General error messages are shown in full text on the large display. Mandrel retraction is programmable and can be automatically retracted early upon reaching the bending angle. The compact drive unit with detachable mandrel support offers advantages for use on site as well as for special designs with very long tube feeds and is also available as a stationary version with an organized tool and mandrel rod storage system. An economical alternative to a fully controlled CNC machine. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant engineering (e.g. chemical industry) • Metalworking • Prototype construction Technical data: • Bending capacity: Ø 6 to 50 × 4 mm, depending on material • Bending radius min/max: 10 mm / 140 mm • Minimum bending radius: 1.5 × Ø (Standard 2 × Ø) • Multi-function machine control with bending angle adjustment (0.1°) • Mandrel support lengths: 1,500 / 3,000 / 4,500 / 6,000 mm (special designs available in longer lengths) • Maximum 180º bending result • Weight: 600–700 kg (depending on version) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Length and rotation positioning via automatic brake system or manual stops via foot switch • Semi-automatic length and rotation positioning via servo motors • Pneumatic rotary stop • Pipe calculation software • Laser-based tool monitoring for clamping force control • 10-inch touchscreen with integrated pipe calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICES: • Test production in our in-house demo room • On-site consultation at your premises • Consultation and processing as lease/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance Kdsdpfjndn Agjx Ag Tor

Stanje: novo, Leto izdelave: 2025, PROFILE BENDING ATTACHMENT PB20 Kodponh R Ekefx Ag Tsdr The ideal complement for tube bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be quickly and easily mounted onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping fixture and pulled around the bending tool. With this system, the lengths of the bent legs can be measured precisely using a length stop and can be bent with high repeatability. TECHNICAL DATA: • Bending capacity, steel 37: 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible • Sharp-edge tools with bending radius R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° (optional) OUR SERVICE: • Welcome to test production at our in-house demo room • Consultation and information meeting at your site • Leasing/financing purchase consultation and processing via JUTEC • Trade-in of your existing machine • Service contracts and on-site maintenance

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta aktuacije: električni, Premer cevi (maks.): 35 mm, Debelina stene cevi (maks.): 2 mm, Kot upogiba (maks.): 360 °, radij upogibanja (maks.): 150 mm, minimalni polmer upogibanja: 32 mm, skupna masa: 28 kg, trajanje garancije: 12 meseci, Oprema: CE označba, nožno daljinsko upravljanje, nujno zaustavitev, THE MOBILE BENDING MACHINE WITH HIGH PERFORMANCE: The compact, mobile design allows for precise and repeatable bending, both stationary and directly on-site, for pipe diameters up to 35 mm, CU 42 mm. A powerful three-phase motor and precision gearbox ensure strong drive power. The motor speed is automatically adjusted, allowing the return movement to take place at a higher speed and reducing cycle times. A position sensor directly on the bending axis guarantees optimal bending accuracy and very high repeatability. The bending angle can be set to 0.5° easily and quickly using push buttons. The large LCD display shows the angles clearly. Storage of up to three bending angles enables efficient bending of pipes with different bending results. For transport, the compact unit and accessories can be stored cleanly and securely in robust transport cases. The “stationary pipe and rotating tool” design principle ensures minimal space requirements when bending. For thin-walled pipes, sliding shoes are used to allow wrinkle-free bending and to form bends with minimal deformations, e.g., in stainless steel and copper pipes. With the PB20 profile bending attachment, flat, square, and round bars can be bent easily. POSSIBLE APPLICATIONS: • Hydraulic piping • Prototype construction • Sanitary and heating installations • Technical data: • Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material • Bending radius min/max: 36 mm/150 mm • Precise digital bending angle adjustment: 0.5° • Maximum 180º bending result; for special applications, continuous operation possible • 40 mm hexagonal shaft for quick tool changes Kedonfvx Nopfx Ag Tedr • Safety footswitch with emergency stop function • 230 V AC connection • Weight: 29 kg • Frequency inverter and three-phase motor • 3 storable bending angles OPTIONAL ACCESSORIES: • Sliding shoe holder • Double roller mount • Profile bender PB20 – for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm • Tripod stand • Machine case • Tool case • Small bending device KBV • Special tools upon request OUR SERVICE: • Welcome to test production at our premises in the demo room • Consultation and information session at your site • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance at your location

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending of pipes up to an external diameter of 100 mm, both stationary and directly at the installation site. Transport is easy using a pallet truck or the optional rollers. A robust three-phase motor and a precision gearbox provide high-performance drive power. The machine impresses with its compact and slim design and a very open bending area. Precise position sensing directly on the bending axis ensures optimal bending accuracy. The bending angle is quickly and easily set via a convenient, menu-guided user interface in 14 languages with touchscreen control, guaranteeing highly intuitive operation. For complex bending tasks, up to 100 bending programs can be stored, each featuring a sequence of up to 8 bends per geometry. Thanks to the multifunctional control system, both forward and return bending speeds can be variably set, and an adjustable overbend function compensates for the material’s springback. With the help of four material characteristic curves, the machine automatically overbends the material to the required angle, delivering precise results. The “stationary tube, rotating tool” principle minimizes the required workspace. For thin-walled tubes, sliding shoes are used to ensure wrinkle-free bends and to achieve minimal deformation—ideal for stainless steel and copper pipes. With the PB20 profile bending attachment, flat, square, and round bars can be bent without issue. Using the small-radius bending device (KBV), extremely small bending radii are possible. POTENTIAL APPLICATIONS: • Plant construction • Hydraulic piping • Serpentine bending • Prototyping • Sanitary and heating installation • Shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material Kjdpfx Agsndk N Aj Tsdr Three-phase 400 V • Bending radius up to 500 mm • Multifunctional machine control with bending angle adjustment (0.1°) • Maximum bending angle 240° • Safety foot switch with emergency stop • Weight: 600 kg OPTIONAL ACCESSORIES: • Adapter system for tools from the 3000/6000 series, with bending radius from 45 mm, incl. 40 mm hex shaft • Profile bender PB20 – for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm • Small-radius bending device KBV • Special tools according to customer specifications • Software customization for special tasks OUR SERVICES: • Welcome to carry out test production in our in-house demo room • Consultation and information meeting at your site • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, maintenance at your site

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, številka stroja/vozila: 1018, vrsta upravljanja: Krmiljeno s PLC krmilnikom, stopnja avtomatizacije: ročni, vrsta aktuacije: električni, Premer cevi (maks.): 50 mm, Dolžina cevi (maks.): 6.000 mm, Debelina stene cevi (maks.): 3 mm, Kot upogiba (maks.): 195 °, radij upogibanja (maks.): 250 mm, trajanje garancije: 24 meseci, Oprema: CE označba, hitroizmenjevalna naprava, nožno daljinsko upravljanje, nujno zaustavitev, THE MANDREL BENDER WITH MANUAL CLAMPING This mandrel bending machine with manual eccentric quick-release clamping for tube fixation enables efficient bending operations. The compact drive unit with detachable mandrel support offers advantages during on-site installation. Direct position detection on the bending axis ensures optimum bending precision. The bending angle can be set quickly and easily via a convenient touchscreen controller with a user-friendly, menu-driven interface. The advanced control system allows for two speed settings as well as a configurable overbending feature for compensating material springback. The bending process is significantly shortened by the automatic “return” movement at the end of the bend. For more complex bending tasks, bending programs can be stored, offering up to 50 bend angles per geometry. An almost unlimited number of programs and up to 200 materials can be saved to the controller or a USB stick. Plug-in bending tools allow for fast changeover to different tube sizes. For challenging geometries, the machine can be converted as standard to either right-hand or left-hand bending directions. The open bending unit also allows for bends such as railing frames with only a single weld seam. Optional PC calculation software determines the cut length for the entire geometry as well as the feed path, twist, and bending angle for every individual bend. The mandrel retraction is programmable and can be automatically triggered once the predefined bending angle is reached. POSSIBLE APPLICATIONS: • Plant construction, e.g. chemical industry • Hydraulic piping • Prototyping • Pipeline construction TECHNICAL DATA: • Bending capacity: Ø 6 to 50 mm • Minimum/maximum bending radius: 10 mm / 140 mm • Bending radii: 2 x D Kdodpfsnfvy Ujx Ag Tsr • Multifunction machine control for bending angle adjustment (0.1° accuracy) • Mandrel support lengths: 1500/3000/4500/6000 mm (special versions are available with longer lengths) • Maximum bending result: 180º • Weight: 300-500 kg (depending on configuration) Optional accessories: • Automatic mandrel lubrication (minimal quantity) • Digital measuring system for length and twisting (resolution 0.1) • Remote control of all functions at the carriage (rotational and length stop) • Bending radius up to 250 mm • PC tube calculation software OUR SERVICES: • Welcome to trial production in our in-house demo room • Consulting and informational meeting at your premises • Consultation and processing of leasing/financing purchase through JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Stanje: novo, Leto izdelave: 2025, THE PRACTICAL HAND TUBE BENDER: The compact, mobile design allows for precise and consistently repeatable bending operations in a bench vice. Operation is performed via a screw-in handle. A lockable setting ring ensures consistent, repeatable bending angles. The easily exchangeable plug-in tool system makes tool changes straightforward. The 'stationary tube and rotating tool' principle enables bending with minimal space requirements. For thin-walled tubes, slide shoes are used for crease-free bending, enabling the production of bends with minimal deformation from materials such as stainless steel and copper tubes. The optional hexagonal drive version allows, in addition to vice operation, the use of the drive force from the 3000 and 6000 bending systems. The KBV can simply be mounted onto the machine’s bending shaft for this purpose. POSSIBLE APPLICATIONS: • Hydraulic piping installation • Prototype fabrication • Plumbing and heating installation TECHNICAL DATA: • Bending capacity: Ø 6 to 18 mm • Manual bend angle limitation • Maximum bending angle: 180º Kodong Amkopfx Ag Tsdr OPTIONAL ACCESSORIES: • KBV with hexagonal drive for bending on models 3000 or 6000 • Machine case • Length stop OUR LOCAL SERVICE FOR YOU: • Welcome to test production at our on-site demonstration room • Consultation and information meeting at your facility • Consultation and processing of lease/financing purchase through JUTEC • Trade in of your current machine • Service contracts and on-site maintenance